Modelling Energy Consumption of a Switch using Fuzzy-Rule Classifier

The energy consumption of IT equipments is becoming an issue of increasing importance. In particular, network equipments such as routers and switches are major contributors to the energy consumption of internet. Therefore it is important to understand how the relationship between input parameters such as bandwidth, number of active ports, traffic-load, hibernation-mode and their impact on energy consumption of a switch. In this paper, the energy consumption of a switch is analyzed in extensive experiments. A fuzzy rule-based model of energy consumption of a switch is proposed based on the result of experiments. The model can be used to predict the energy saving when deploying new switches by controlling the parameters to achieve desired energy consumption and subsequent performance. Furthermore, the model can also be used for further researches on energy saving techniques such as energy-efficient routing protocol, dynamic link shutdown, etc.

Analysing the power consumption behaviour of Ethernet switch using Design of Experiment

At present, one of the main concerns of green network is to minimize the power consumption of network infrastructure. Surveys show that, the highest amount of power is consumed by the network devices during its runtime. However to control this power consumption it is important to know which factors has highest impact on this matter. This paper is focused on the measurement and modeling the power consumption of an Ethernet switch during its runtime considering various types of input parameters with all possible combinations. For the experiment, three input parameters are chosen. They are bandwidth, link load and number of connections. The output to be measured is the power consumption of the Ethernet switch. Due to the uncertain power consuming pattern of the Ethernet switch a fully-comprehensive experimental evaluation would require an unfeasible and cumbersome experimental phase. Because of that, design of experiment (DoE) method has been applied to obtain adequate information on the effects of each input parameters on the power consumption. The whole work consists of three parts. In the first part a test bed is planned with input parameters and the power consumption of the switch is measured. The second part is about generating a mathematical model with the help of design of experiment tools. This model can be used for measuring precise power consumption in different scenario and also pinpoint the parameters with higher influence in power consumption. And in the last part, the mathematical model is evaluated by comparing with the experimental values.

Power Consumption Measurement and Scenario Based Energy Model in Wearable Computing Applications

The power is still today an issue in wearable computing applications. The aim of the present paper is to raise awareness of the power consumption of wearable computing devices in specific scenarios to be able in the future to design energy efficient wireless sensors for context recognition in wearable computing applications. The approach is based on a hardware study. The objective of this paper is to analyze and compare the total power consumption of three representative wearable computing devices in realistic scenarios such as Display, Speaker, Camera and microphone, Transfer by Wi-Fi, Monitoring outdoor physical activity and Pedometer. A scenario based energy model is also developed. The Samsung Galaxy Nexus I9250 smartphone, the Vuzix M100 Smart Glasses and the SimValley Smartwatch AW-420.RX are the three devices representative of their form factors. The power consumption is measured using PowerTutor, an android energy profiler application with logging option and using unknown parameters so it is adjusted with the USB meter. The result shows that the screen size is the main parameter influencing the power consumption. The power consumption for an identical scenario varies depending on the wearable devices meaning that others components, parameters or processes might impact on the power consumption and further study is needed to explain these variations. This paper also shows that different inputs (touchscreen is more efficient than buttons controls) and outputs (speaker sensor is more efficient than display sensor) impact the energy consumption in different way. This paper gives recommendations to reduce the energy consumption in healthcare wearable computing application using the energy model.

Fiber-reinforced composite fixed dental prostheses: Studies of the materials used as pontics

Fiber-reinforced composite fixed dental prostheses – Studies of the materials used as pontics University of Turku, Faculty of Medicine, Institute of Dentistry, Department of Biomaterials Science, Finnish Doctoral Program in Oral Sciences – FINDOS, Annales Universitatis Turkuensis, Turku, Finland 2015 Fiber-reinforced composites (FRC), a non-metallic biomaterial, represent a suitable alternative in prosthetic dentistry when used as a component of fixed dental prostheses (FDPs). Some drawbacks have been identified in the clinical performance of FRC restorations, such as delamination of the veneering material and fracture of the pontic. Therefore, the current series of studies were performed to investigate the possibilities of enhancing the mechanical and physical properties of FRC FDPs by improving the materials used as pontics, to then heighten their longevity. Four experiments showed the importance of the pontic design and surface treatment in the performance of FRC FDPs. In the first, the load-bearing capacities of inlay-retained FRC FDPs with pontics of various materials and thicknesses were evaluated. Three different pontic materials were assessed with different FRC framework vertical positioning. Thicker pontics showed increased load-bearing capacities, especially ceramic pontics. A second study was completed investigating the influence of the chemical conditioning of the ridge-lap surface of acrylic resin denture teeth on their bonding to a composite resin. Increased shear bond strength demonstrated the positive influence of the pretreatment of the acrylic surfaces, indicating dissolution of the denture surfaces, and suggesting potential penetration of the monomer systems into the surface of denture teeth. A third study analyzed the penetration depth of different monomer systems on the acrylic resin denture teeth surfaces. The possibility of establishing a durable bond between acrylic pontics and FRC frameworks was demonstrated by the ability of monomers to penetrate the surface of acrylic resin denture teeth, measured by a confocal scanning type microscope. A fourth study was designed to evaluate the load-bearing capacities of FRC FDPs using the findings of the previous three studies. In this case, the performance of pre-shaped acrylic resin denture teeth used as pontics with different composite resins as filling materials was evaluated. The filling material influenced the load-bearing capacities, providing more durable FRC FDPs. It can be concluded that the mechanical and physical properties of FRC FDPs can be improved as has been shown in the development of this thesis. The improvements reported then might provide long lasting prosthetic solutions of this kind, positioning them as potentially permanent rehabilitation treatments. Key words: fiber-reinforced composite, fixed dental prostheses, inlay-retained bridges, adhesion, acrylic resin denture teeth, dental material.

Effect of gala apples (Malus domestica Borkh) on lipidemia of hyperlipidemic rats

A healthy life style and a balanced diet, associated with a high fruit and vegetable intake, are linked to good health and the prevention of diseases. Apples contain bioactive compounds that help in the prevention and control of hyperlipidemia. One of the Public Health concerns in Brazil is to reduce cardiovascular diseases. Therefore, the objective of this work was to analyze the chemical composition of Gala apples and to study the effect of their consumption on weight gain, food intake, serum levels of total cholesterol, HDL-C, LDL-C, triglycerides, hepatic cholesterol and fecal cholesterol in male albino Wistar rats fed a hypercholesterolemic diet. Six animals were utilized for each treatment (control, 5, 15 and 25% apple diet), during 30 and 60 days. This study showed that one apple (200 g) can provide 14.5% of recommended total fiber and 55% of recommended vitamin C, besides supplying considerable quantities of phenolic compounds (0.38 g.100 g-1) and tannins (0.16 g.100 g-1). All animals showed a non-significant reduction in their weight gain and food intake with an increase in the concentration of apple in the diets. At the end of 30 days, all of the diets provided a significant reduction in the levels of triglycerides compared to the control group. The 15 and 25% apple diets showed significant reductions in the serum levels of total cholesterol and LDL-C and an increase in the level of fecal cholesterol in relation to the control group. The 25% apple diet provided a significant reduction in the hepatic cholesterol levels compared to the control group. After 60 days, the serum levels of total cholesterol, LDL-C, HDL-C and triglycerides in rats fed with 5, 15 and 25% apple diets were similar to the control group. This probably happened due to a revertion of the process. These results show the importance of Gala apples in the control of hyperlipidemia in rats. A diet rich in vegetables and fruits, including apples, associated to a healthy life style, over time, could prevent or reduce the risk of heart disease.

Carbohydrate composition of ripe pineapple (cv. perola) and the glycemic response in humans

Brazil is the third largest producer of pineapple (Ananas comosus) and the market for fresh pineapple is sustained by the Hawaii and Perola cultivars. In this work the Perola cultivar was divided into three main parts, shell, core and pulp, for characterization. Moisture in the pulp was higher (between 10 and 15%) than in the shell and core. The amount of protein was higher in the core (35%) than in the pulp and shell. Perola contained relatively low concentrations of total ascorbic acid in the edible parts, although higher levels of ascorbic acid in the shell. Citric acid corresponded to almost 60% of the total organic acids. The total soluble sugars [~7-12% (FW)] were predominantly sucrose, fructose and glucose. The core had almost twice as much total sugar (12%) than the pulp (6.8%). The amount of insoluble dietary fiber was around 1%, and the soluble fiber was less than 0.1%. The pulp showed the highest concentration of polyphenols (0.49%) and antioxidant activity (33 µmol.g-1) out of the parts. The consumption of the pineapple pulp or core produced a high glycemic index (~93%), but considering the glycemic load, this fruit can be considered as low dietary.

Drying of sicilian lemon residue: influence of process variables on the evaluation of the dietary fiber produced

In this study, the effect of the process variables of the air-drying of Sicilian lemon residues on some technological properties of the fibers produced was studied. The determination and modeling of desorption isotherms were used to establish the equilibrium moisture content at 60, 75, and 90 °C using the static method with 8 saturated salt solutions. The best fit was obtained with BET and GAB models. The drying process was conducted in a vertical tray dryer and delineated according to a central composite experimental design (2²) using the following as factors: air velocity (0.5, 0.75 and 1 m/s) and temperature (60, 75, and 90 °C), and it presented a good fit to the exponential model (R² > 99.9%). The experimental design responses evaluated were the technological properties of the fibers: water-holding, oil-holding, and swelling capacity. Since these properties were present in high levels, the lemon residues could be used to increase content of fibers in foods resulting in the addition of nutritional benefits for the consumers.

Chemical composition of five loquat cultivars planted in Brazil

Loquat is a fruit with high market value cultivated in Southeast Brazil. Despite of this, there are little details about its quality characteristics. Fruits from five loquat cultivars, developed using genetic breeding, were analyzed to assess their compositional traits. The cultivars Centenária, Mizuho, Mizumo, Néctar de Cristal and Mizauto were selected based on their high productivity and resistance to diseases. Soluble sugars, organic acids, and carotenoids were quantified using liquid chromatography. The cultivar (cv.) with the highest total sugar concentration was Mizumo and the lowest concentration was found in Centenária. The main sugar detected was sucrose, and the malic acid was the major organic acid. Ascorbic acid was detected in small amounts. The total dietary fiber contents were almost the same in all cultivars. The major carotenoids detected were β-carotene and β-cryptoxanthin, except for the cultivar Nectar de Cristal, a white pulp loquat. These results contribute to the knowledge about de physiology of loquat fruit, an interesting raw material due to its nutritional and sensorial characteristics. Furthermore, the results obtained could help to identify the most appropriate use of the loquats with different attributes either for consumption in natura or for industrial processing.

Study of clarification process of sugar cane juice for consumption

Sugar cane juice or garapa darkens quickly after extraction due to the oxidation of some of its constituents harming its commercialization thus requiring rapid consumption. The objective of this study was to develop a mild process for sugar cane clarification, obtaining a cloudy, greenish-yellow beverage. The following parameters were combined to aiming at this objective: heat treatment at 65 ºC/50 minutes; pH change (to 7.0, 7.5, and 8.0); addition of flocculant (0, 30, and 60 ppm Aluminum polychloride or APC - "Panclar P-1010"), and clarifier aid (0, 2, or 4 ppm of positively charged polyelectrolyte - "Magnafloc LT-27"). The decantation time was 45 minutes and the supernatant liquid was removed with a vacuum pump. The treatments were defined using the Response Surface Methodology and were submitted to physicochemical analysis for turbidity (%), total polysaccharide content (µg.mL-1), dextran content (µg.mL-1), and sensory analysis (acceptance test) for the attributes of color, appearance, and turbidity. It was concluded that the addition of 60 ppm APC, pH 8, and 0 ppm polyelectrolyte represented the best treatment to obtain a low polysaccharide content, 90% turbidity, and high scores for color, appearance, and turbidity. The beverage was sensorially well accepted by consumers.

Evaluation of the in vitro glycemic index of a fiber-rich extruded breakfast cereal produced with organic passion fruit fiber and corn flour

The aim of this study was to determine the influence of process parameters and Passion Fruit Fiber (PFF) addition on the Glycemic Index (GI) of an extruded breakfast cereal. A 2³ Central Composite Rotational Design (CCRD) was used, with the following independent variables: raw material moisture content (18-28%), 2nd and 3rd barrel zone temperatures (120-160 ºC), and PFF (0-30%). Raw materials (organic corn flour and organic PFF) were characterized as to their proximate composition, particle size, and in vitro GI. The extrudates were characterized as to their in vitro GI. The Response Surface Methodology (RSM) and Principal Component Analysis (PCA) were used to analyze the results. Corn flour and PFF presented 8.55 and 7.63% protein, 2.61 and 0.60% fat, 0.52 and 6.17% ash, 78.77 and 78.86% carbohydrates (3 and 64% total dietary fiber), respectively. The corn flour particle size distribution was homogeneous, while PFF presented a heterogeneous particle size distribution. Corn flour and PFF presented values of GI of 48 and 45, respectively. When using RSM, no effect of the variables was observed in the GI of the extrudates (average value of 48.41), but PCA showed that the GI tended to be lower when processing at lower temperatures (<128 ºC) and at higher temperatures (>158 ºC). When compared to white bread, the extrudates showed a reduction of the GI of up to 50%, and could be considered an interesting alternative in weight and glycemia control diets.

Sensory evaluation and nutritional value of cakes prepared with whole flaxseed flour

The objective of this study was to evaluate the nutritional value, the oxidative stabilitiy, and consumer acceptance of cakes containing four different concentrations of flaxseed flour (5, 15, 30 and 45%) as partial replacement for wheat flour. The oxidative stability of polyunsaturated fatty acids was evaluated through the lipid peroxidation test (TBARS) in the flour and cakes. Linolenic acid was determined by gas chromatography as well as contents of protein, lipid, ash, and dietary fiber. Consumer acceptance was assessed using a structured hedonic scale of nine points. The oxidative stability of lipid flaxseeds was not affected by the heat treatment during flour processing and cake baking. Cakes made with 5, 15, and 30% of flaxseed flour, the most accepted by consumers, had dietary fiber levels ranging from 3.5 to 6.2 g and linolenic acid ranging from 445 to 2,500 mg.100 g-1 of the product. The cakes received claims of good and excellent source of dietary fiber and linolenic acid, respectively, both are bioactive compounds. The use of up to 30% of flaxseed flour in the preparation of cakes is a useful strategy to optimize the consumption of food rich in functional ingredients.

Effect of the daily consumption of ostrich and bovine meat on the lipid metabolism in rats

The objective of this study is to evaluate the effect of the daily consumption of ostrich meat (lliofemuralis internus) and bovine meat (Psoas major) on the lipid metabolism in adult mice. The analyses of the centesimal composition of the meats and preparation of the diets were accomplished following the recommendations of the American Institute of Nutrition-AIN-93. Three groups of 150 day-old animals: group I (diet I, with casein), group II (diet II, with ostrich meat), and group III (diet III with bovine meat) were fed for 13 weeks with the respective diets and weight gain, food efficiency coefficient, total cholesterol, lipoprotein fractions, hepatic, transaminases and body fat percentage and hepatic fat content were evaluated. No difference (p < 0.05) it was found for weight gain and coefficients for feed efficiency among the groups. Total cholesterol, HDL-cholesterol, LDL-cholesterol, relationship of total cholesterol/HDL-cholesterol, VLDL, triglycerides and hepatic transaminases were also not different among the groups (p < 0.05). This research suggests that the consumption of ostrich meat or thin bovine meat on a daily basis does not raise concerns about weight gain, and an increase in the plasma concentrations of lipoprotein and levels of hepatic transaminase.

Macrocospic and physiochemical characterization of a sugarless and gluten-free cake enriched with fibers made from pumpkin seed (Cucurbita maxima, L.) flour and cornstarch

The Consumers' interest for products with caloric reduction has increased, and their development is a technological challenge. The consumption of cakes has grown in importance and the demand for dietary products has stimulated the use of sweeteners and the optimization of bakery products. The consumption of fibers is related to chronic diseases prevention. Pumpkin seeds (maximum Cucurbita, L.), rich in fibers, can be used as a source of fiber in food products. A gluten-free diet is not easy to follow since gluten free products are not always available. The objective of this work was to perform a physicochemical characterization of cakes prepared with flours blends (FB) based on Pumpkin Seed Flour (PSF). The cakes were elaborated with FB in the ratios of 30:70 (C30) and 40:60 (C40) of PSF and cornstarch (CS), respectively. The results showed gluten absence and near-neutral pH. The chemical analysis of C30 and B40 showed increase of ashes, lipids, proteins, and insoluble dietary fiber and a decrease in the content of carbohydrates and calories. The chemical composition of C40 presented the greatest content of lipids, proteins, and dietary fibers, the lowest content of calories, and the best physical parameters. Therefore, both products proved suitable for human consumption.

Quinoa (Chenopodium quinoa, Willd.) as a source of dietary fiber and other functional components

Four varieties of an Andean indigenous crop, quinoa (Chenopodium quinoa Willd.), were evaluated as a source of dietary fiber, phenolic compounds and antioxidant activity. The crops were processed by extrusion-cooking and the final products were analyzed to determine the dietary fiber, total polyphenols, radical scavenging activity, and in vitro digestibility of starch and protein. There were no significant differences in the contents of total dietary fiber between varieties of quinoa. In all cases, the contents of total and insoluble dietary fiber decreased during the extrusion process. At the same time, the content of soluble dietary fiber increased. The content of total phenolic compounds and the radical scavenging activity increased during the extrusion process in the case of all 4 varieties. There were significant differences between the varieties and the content of total polyphenols. The in vitro protein digestibility of quinoa varieties was between 76.3 and 80.5% and the in vitro starch digestibility was between 65.1 and 68.7%. Our study demonstrates that quinoa can be considered a good source of dietary fiber, polyphenols and other antioxidant compounds and that extrusion improves the nutritional value.