LIFE CYCLE ASSESSMENT OF BIOFUEL PRODUCED FROM ALGAE

Algae are considered a promising source of biofuels in the future. However, the environmental impact of algae-based fuel has high variability in previous LCA studies due to lack of accurate data from researchers and industry. The National Alliance for Advanced Biofuels and Bioproducts (NAABB) project was designed to produce and evaluate new technologies that can be implemented by the algal biofuel industry and establish the overall process sustainability. The MTU research group within NAABB worked on the environmental sustainability part of the consortium with UOP-Honeywell and with the University of Arizona (Dr. Paul Blowers). Several life cycle analysis (LCA) models were developed within the GREET Model and SimaPro 7.3 software to quantitatively assess the environment viability and sustainability of algal fuel processes. The baseline GREET Harmonized algae life cycle was expanded and replicated in SimaPro software, important differences in emission factors between GREET/E-Grid database and SimaPro/Ecoinvent database were compared, and adjustments were made to the SimaPro analyses. The results indicated that in most cases SimaPro has a higher emission penalty for inputs of electricity, chemicals, and other materials to the algae biofuels life cycle. A system-wide model of algae life cycle was made starting with preliminary data from the literature, and then progressed to detailed analyses based on inputs from all NAABB research areas, and finally several important scenarios in the algae life cycle were investigated as variations to the baseline scenario. Scenarios include conversion to jet fuel instead of biodiesel or renewable diesel, impacts of infrastructure for algae cultivation, co-product allocation methodology, and different usage of lipid-extracted algae (LEA). The infrastructure impact of algae cultivation is minimal compared to the overall life cycle. However, in the scenarios investigating LEA usage for animal feed instead of internal recycling for energy use and nutrient recovery the results reflect the high potential variability in LCA results. Calculated life cycle GHG values for biofuel production scenarios where LEA is used as animal feed ranged from a 55% reduction to 127% increase compared to the GREET baseline scenario depending on the choice of feed meal. Different allocation methods also affect LCA results significantly. Four novel harvesting technologies and two extraction technologies provided by the NAABB internal report have been analysis using SimaPro LCA software. The results indicated that a combination of acoustic extraction and acoustic harvesting technologies show the most promising result of all combinations to optimize the extraction of algae oil from algae. These scenario evaluations provide important insights for consideration when planning for the future of an algae-based biofuel industry.

CRITERIA FOR SUSTAINABLE PRODUCT DESIGN WITH 3D PRINTING IN THE DEVELOPING WORLD

The demand for consumer goods in the developing world continues to rise as populations and economies grow. As designers, manufacturers, and consumers look for ways to address this growing demand, many are considering the possibilities of 3D printing. Due to 3D printing’s flexibility and relative mobility, it is speculated that 3D printing could help to meet the growing demands of the developing world. While the merits and challenges of distributed manufacturing with 3D printing have been presented, little work has been done to determine the types of products that would be appropriate for such manufacturing. Inspired by the author’s two years of Peace Corps service in the Tanzania and the need for specialty equipment for various projects during that time, an in-depth literature search is undertaken to better understand and summarize the process and capabilities of 3D printing. Human-centered design considerations are developed to focus on the product desirability, the technical feasibility, and the financial viability of using 3D printing within Tanzania. Beginning with concerns of what Tanzanian consumers desire, many concerns later arise in regards to the feasibility of creating products that would be sufficient in strength and quality for the demands of developing world consumers. It is only after these concerns are addressed that the viability of products can be evaluated from an economic perspective. The larger impacts of a product beyond its use are vital in determining how it will affect the social, economic, and environmental well-being of a developing nation such as Tanzania. Thus technology specific criteria are necessary for assessing and quantifying the broader impacts that a 3D-printed product can have within its ecosystem, and appropriate criteria are developed for this purpose. Both sets of criteria are then demonstrated and tested while evaluating the desirability, feasibility, viability, and sustainability of printing a piece of equipment required for the author’s Peace Corps service: a set of Vernier calipers. Required for science educators throughout the country, specialty equipment such as calipers initially appear to be an ideal candidate for 3D printing, though ultimately the printing of calipers is not recommended due to current restrictions in the technology. By examining more specific challenges and opportunities of the products 3D printing can produce, it can be better determined what place 3D printing will have in manufacturing for the developing world. Furthermore, the considerations outlined in this paper could be adapted for other manufacturing technologies and regions of the world, as human centered design and sustainability will be critical in determining how to supply the developing world with the consumer goods it demands.

Koproduktion von Wissen in der Entwicklung des Biolandbaus - Einflüsse von Marginalisierung, Anerkennung und Markt

The empirical analysis of the historical development of transdisciplinary co-production of knowledge (CPK) in organic agriculture (OA) in Switzerland has revealed three distinct phases. The initial phase shows various characteristics of transdisciplinary CPK and a high importance of experiential knowledge. The 2nd and 3rd phases involve an in-creasing segregation of farmers’, extension agents’, and scientists’ knowledge, caused by internal and external impacts, i.e. foundation of independent research institutions, changes in agriculture policy, and new market strategies. These developments strikingly represent an ambiguous trend: the growing societal and political recognition of OA and the increasing market, which are positive achievements, are associated by a gradual loss of very precious forms of CPK. A successful re-establishment of CPK processes and re-integration of experiential knowledge would help to resolve this dilemma and thus improve future research in OA and sustainability research in general.

Clustering Assessment: Enhancing Synergies among Multilateral Environmental Agreements

Against the background of a widely fragmented and diluted international environmental governance architecture, different reform options are currently being discussed. This issue brief considers whether streamlining international environmental regimes by grouping or ‘clustering’ international agreements could improve effectiveness and efficiency. It outlines the general idea of the clustering approach, draws lessons from the chemicals and waste cluster and examines the implications and potentials of clustering multilateral environmental agreements.

Lessons from the Multilateral Trading System for Reforming the Architecture of the International Environmental Regime

Recent studies on environmental regimes suggest that important lessons and policy recommendations may be drawn from the functioning of the multilateral trading regime. This brief compares the needs and goals of the trade and environment regimes, and discusses how insights from over sixty years of experience of the multilateral trading system might provide ideas for redesigning the architecture of the international environmental regime. It further calls for a better dialogue and improved complementarities between the two fields in order to enhance coherence within international law.

The processing of human pro-tumor necrosis factor

Human pro-TNF-$\alpha$ is a 26 kd type II transmembrane protein, and it is the precursor of 17 kd mature TNF. Pro-TNF release mature from its extracellular domain by proteolytic cleavage between resideu Ava ($-$1) and Val (+1). Both forms of TNF are biologically active and the native form of mature TNF is a bell-shaped trimer. The structure of pro-TNF was studied both in intact cell system and in an in vitro translation system by chemical crosslinking. We found that human pro-TNF protein exist as a trimer in intact cells (LPS-induced THP-1 cells and TNF cDNA transfected COS-3 cells) and this trimeric structure is assembled intracellularly, possibly in the ER. By analysis several deletion mutants, we observed a correlation between expression of pro-TNF cytotoxicity in a juxtacrine fashion and detection of the trimer, suggesting the trimeric structure is very important for its biologic activity. With a series of deletion mutants in the linking domain, we found that the small deletion did not block the cleavage and large deletion did regardless of the presence or absence of the native cleavage site, suggesting that the length of the residues between the plasma membrane and the base of the trimer determines the rate of the cleavage, possibly by blocking the accessibility of the cleavage enzyme to its action site. Our data also suggest that the native cleavage site is not sufficient for the release of mature TNF and alternative cleavage site(s) exists. ^

Evaluating perspectives for PRRS virus elimination from pig dense areas with a risk factor based herd index

Porcine reproductive and respiratory syndrome virus (PRRSV) is wide-spread in pig populations globally. In many regions of Europe with intensive pig production and high herd densities, the virus is endemic and can cause disease and production losses. This fuels discussion about the feasibility and sustainability of virus elimination from larger geographic regions. The implementation of a program aiming at virus elimination for areas with high pig density is unprecedented and its potential success is unknown. The objective of this work was to approach pig population data with a simple method that could support assessing the feasibility of a sustainable regional PRRSV elimination. Based on known risk factors such as pig herd structure and neighborhood conditions, an index characterizing individual herds' potential for endemic virus circulation and reinfection was designed. This index was subsequently used to compare data of all pig herds in two regions with different pig- and herd-densities in Lower Saxony (North-West Germany) where PRRSV is endemic. Distribution of the indexed herds was displayed using GIS. Clusters of high herd index densities forming potential risk hot spots were identified which could represent key target areas for surveillance and biosecurity measures under a control program aimed at virus elimination. In an additional step, for the study region with the higher pig density (2463 pigs/km(2) farmland), the potential distribution of PRRSV-free and non-free herds during the implementation of a national control program aiming at national virus elimination was modeled. Complex herd and trade network structures suggest that PRRSV elimination in regions with intensive pig farming like that of middle Europe would have to involve legal regulation and be accompanied by important trade and animal movement restrictions. The proposed methodology of risk index mapping could be adapted to areas varying in size, herd structure and density. Interpreted in the regional context, this could help to classify the density of risk and to accordingly target resources and measures for elimination.

Developing a point-of-care electronic medical record system for TB/HIV co-infected patients: experiences from Lighthouse Trust, Lilongwe, Malawi.

BACKGROUND Implementation of user-friendly, real-time, electronic medical records for patient management may lead to improved adherence to clinical guidelines and improved quality of patient care. We detail the systematic, iterative process that implementation partners, Lighthouse clinic and Baobab Health Trust, employed to develop and implement a point-of-care electronic medical records system in an integrated, public clinic in Malawi that serves HIV-infected and tuberculosis (TB) patients. METHODS Baobab Health Trust, the system developers, conducted a series of technical and clinical meetings with Lighthouse and Ministry of Health to determine specifications. Multiple pre-testing sessions assessed patient flow, question clarity, information sequencing, and verified compliance to national guidelines. Final components of the TB/HIV electronic medical records system include: patient demographics; anthropometric measurements; laboratory samples and results; HIV testing; WHO clinical staging; TB diagnosis; family planning; clinical review; and drug dispensing. RESULTS Our experience suggests that an electronic medical records system can improve patient management, enhance integration of TB/HIV services, and improve provider decision-making. However, despite sufficient funding and motivation, several challenges delayed system launch including: expansion of system components to include of HIV testing and counseling services; changes in the national antiretroviral treatment guidelines that required system revision; and low confidence to use the system among new healthcare workers. To ensure a more robust and agile system that met all stakeholder and user needs, our electronic medical records launch was delayed more than a year. Open communication with stakeholders, careful consideration of ongoing provider input, and a well-functioning, backup, paper-based TB registry helped ensure successful implementation and sustainability of the system. Additional, on-site, technical support provided reassurance and swift problem-solving during the extended launch period. CONCLUSION Even when system users are closely involved in the design and development of an electronic medical record system, it is critical to allow sufficient time for software development, solicitation of detailed feedback from both users and stakeholders, and iterative system revisions to successfully transition from paper to point-of-care electronic medical records. For those in low-resource settings, electronic medical records for integrated care is a possible and positive innovation.

Using intervention mapping to develop a community garden program at the women's home

This culminating experience was a practice based intervention conducted by an organization, utilizing an intervention mapping approach for the program planning. It took place summer 2010 through spring 2011 and included incorporating a community garden into the Gusto wellness program at The Women's Home. This organization offers long-term residential care, and therapeutic services. Literature relating to community gardens and nutrition behavior change was reviewed. Short-term objectives included: 1) Conducting a needs assessment using focus groups, 2) Designing gardening program components based on intervention mapping guidelines, 3) Constructing a garden bed at Midtown Community Garden for use of The Women's Home, 4) Planning and implementing gardening education, and 5) Assessing feasibility of the garden program. The target population included 24 residents living at the residential dormitory of The Women's Home at the time of this project. The major variables are intervention mapping constructs including: 1) Needs assessment, 2) Preparing matrices of change objectives, 3) Selecting theory-informed intervention methods and practical strategies, 4) Producing program components and materials, 5) Planning program adoption, implementation, and sustainability, and 6) Planning for evaluation. The specific focus was lack of access to fresh fruits and vegetables (FV) for this population. Focus group responses revealed interest in community garden participation. Matrices of change were developed for lack of FV access based on performance objectives for behavioral and environmental factors and related determinants and theory. Methods and strategies were developed to implement a community garden and encourage participation. Program components included initiating a garden club, networking activities, creating gardening curriculum, and participating at Midtown Community Garden. Adoption and implementation performance objectives were outlined, and many were carried out. Evaluation questions were designed and outcomes of the garden project were discussed. ^ Outcomes of the project included exposure of garden topics and activities for The Women's Home residents, focus group responses revealing an interest in gardening among this population, gardening program components designed based on intervention mapping steps, and a constructed garden bed that was used for planting vegetables and flowers through fall 2010. Limited resources and budget along with a lack of a residential coordinator at The Women's Home were the main limiting factors for this project. Future garden projects can be developed using the intervention mapping process.^

Effectiveness of a nutrition education program for women in a residential program after incarceration

Background: The number of incarcerated women has increased dramatically over the past two decades. During their stay in prison, the medical and nutritional needs of these women are frequently ignored. Overweight or obesity related to poor dietary habits and low-income status are important risk factors for health inequities. Women in this population are at risk for dietary-related chronic diseases such as hypertension, diabetes, and cardiovascular diseases. This is an indication that there is a need for nutrition education in this population. ^ Purpose: The purpose of this study was to provide an evidence-based nutrition education program at a facility for previously incarcerated women in Downtown Houston, Texas (Brigid's Hope). This nutrition education program focused on promoting better health and prevention of chronic diseases by increasing fruit and vegetable (FV) intake and healthy eating on a limited budget. Constructs such as knowledge, skills, self-efficacy, and perceived barriers were evaluated as well as acceptability, feasibility, and sustainability of the program. ^ Methods: The Hope for Health Nutrition Education Program occurred in four weekly sessions at Brigid's Hope. The evaluation design was a one-group quasi-experimental design with pre- and post-test measures. Identical pre- and post-tests were administered before and after the intervention. A total of 11 residents and 2 staff members participated in the study. Results: After four nutrition education sessions, post-tests revealed an overall increase in knowledge, skills, and self-efficacy scores, and decrease in perceived barrier scores towards FV consumption. Changes in skills, self-efficacy, and perceived barriers scores were found to be statistically significant. Participant satisfaction surveys revealed overall high satisfaction of the program and that continuing the program in the future would be possible with support from staff member and mentors. ^ Conclusions: Results from this study show that a nutrition education program can have positive effects towards knowledge, skills, self-efficacy, and perceived barriers towards FV consumption for previously incarcerated women. The high satisfaction for this program shows that a health promotion program with focus on diet and nutrition can play an important role in helping this unique population of women re-enter society.^

TIME SERIES ANALYSIS AS INPUT FOR PREDICTIVE MODELING: PREDICTING CARDIAC ARREST IN A PEDIATRIC INTENSIVE CARE UNIT

The first manuscript, entitled "Time-Series Analysis as Input for Clinical Predictive Modeling: Modeling Cardiac Arrest in a Pediatric ICU" lays out the theoretical background for the project. There are several core concepts presented in this paper. First, traditional multivariate models (where each variable is represented by only one value) provide single point-in-time snapshots of patient status: they are incapable of characterizing deterioration. Since deterioration is consistently identified as a precursor to cardiac arrests, we maintain that the traditional multivariate paradigm is insufficient for predicting arrests. We identify time series analysis as a method capable of characterizing deterioration in an objective, mathematical fashion, and describe how to build a general foundation for predictive modeling using time series analysis results as latent variables. Building a solid foundation for any given modeling task involves addressing a number of issues during the design phase. These include selecting the proper candidate features on which to base the model, and selecting the most appropriate tool to measure them. We also identified several unique design issues that are introduced when time series data elements are added to the set of candidate features. One such issue is in defining the duration and resolution of time series elements required to sufficiently characterize the time series phenomena being considered as candidate features for the predictive model. Once the duration and resolution are established, there must also be explicit mathematical or statistical operations that produce the time series analysis result to be used as a latent candidate feature. In synthesizing the comprehensive framework for building a predictive model based on time series data elements, we identified at least four classes of data that can be used in the model design. The first two classes are shared with traditional multivariate models: multivariate data and clinical latent features. Multivariate data is represented by the standard one value per variable paradigm and is widely employed in a host of clinical models and tools. These are often represented by a number present in a given cell of a table. Clinical latent features derived, rather than directly measured, data elements that more accurately represent a particular clinical phenomenon than any of the directly measured data elements in isolation. The second two classes are unique to the time series data elements. The first of these is the raw data elements. These are represented by multiple values per variable, and constitute the measured observations that are typically available to end users when they review time series data. These are often represented as dots on a graph. The final class of data results from performing time series analysis. This class of data represents the fundamental concept on which our hypothesis is based. The specific statistical or mathematical operations are up to the modeler to determine, but we generally recommend that a variety of analyses be performed in order to maximize the likelihood that a representation of the time series data elements is produced that is able to distinguish between two or more classes of outcomes. The second manuscript, entitled "Building Clinical Prediction Models Using Time Series Data: Modeling Cardiac Arrest in a Pediatric ICU" provides a detailed description, start to finish, of the methods required to prepare the data, build, and validate a predictive model that uses the time series data elements determined in the first paper. One of the fundamental tenets of the second paper is that manual implementations of time series based models are unfeasible due to the relatively large number of data elements and the complexity of preprocessing that must occur before data can be presented to the model. Each of the seventeen steps is analyzed from the perspective of how it may be automated, when necessary. We identify the general objectives and available strategies of each of the steps, and we present our rationale for choosing a specific strategy for each step in the case of predicting cardiac arrest in a pediatric intensive care unit. Another issue brought to light by the second paper is that the individual steps required to use time series data for predictive modeling are more numerous and more complex than those used for modeling with traditional multivariate data. Even after complexities attributable to the design phase (addressed in our first paper) have been accounted for, the management and manipulation of the time series elements (the preprocessing steps in particular) are issues that are not present in a traditional multivariate modeling paradigm. In our methods, we present the issues that arise from the time series data elements: defining a reference time; imputing and reducing time series data in order to conform to a predefined structure that was specified during the design phase; and normalizing variable families rather than individual variable instances. The final manuscript, entitled: "Using Time-Series Analysis to Predict Cardiac Arrest in a Pediatric Intensive Care Unit" presents the results that were obtained by applying the theoretical construct and its associated methods (detailed in the first two papers) to the case of cardiac arrest prediction in a pediatric intensive care unit. Our results showed that utilizing the trend analysis from the time series data elements reduced the number of classification errors by 73%. The area under the Receiver Operating Characteristic curve increased from a baseline of 87% to 98% by including the trend analysis. In addition to the performance measures, we were also able to demonstrate that adding raw time series data elements without their associated trend analyses improved classification accuracy as compared to the baseline multivariate model, but diminished classification accuracy as compared to when just the trend analysis features were added (ie, without adding the raw time series data elements). We believe this phenomenon was largely attributable to overfitting, which is known to increase as the ratio of candidate features to class examples rises. Furthermore, although we employed several feature reduction strategies to counteract the overfitting problem, they failed to improve the performance beyond that which was achieved by exclusion of the raw time series elements. Finally, our data demonstrated that pulse oximetry and systolic blood pressure readings tend to start diminishing about 10-20 minutes before an arrest, whereas heart rates tend to diminish rapidly less than 5 minutes before an arrest.

Abundance of mesozooplankton in the western part of the Black Sea in summer 1998 during the National Monitoring Programme

The dataset is based on samples collected in the summer of 1998 in the Western Black Sea in front of Bulgaria coast. The whole dataset is composed of 69 samples (from 22 stations of National Monitoring Grid) with data of mesozooplankton species composition abundance and biomass. Samples were collected in discrete layers 0-10, 0-20, 0-50, 10-25, 25-50, 50-100 and from bottom up to the surface at depths depending on water column stratification and the thermocline depth. Zooplankton samples were collected with vertical closing Juday net,diameter - 36cm, mesh size 150 µm. Tows were performed from surface down to bottom meters depths in discrete layers. Samples were preserved by a 4% formaldehyde sea water buffered solution. Sampling volume was estimated by multiplying the mouth area with the wire length. Mesozooplankton abundance: The collected material was analysed using the method of Domov (1959). Samples were brought to volume of 25-30 ml depending upon zooplankton density and mixed intensively until all organisms were distributed randomly in the sample volume. After that 5 ml of sample was taken and poured in the counting chamber which is a rectangle form for taxomomic identification and count. Large (> 1 mm body length) and not abundant species were calculated in whole sample. Counting and measuring of organisms were made in the Dimov chamber under the stereomicroscope to the lowest taxon possible. Taxonomic identification was done at the Institute of Oceanology by Lyudmila Kamburska using the relevant taxonomic literature (Mordukhay-Boltovskoy, F.D. (Ed.). 1968, 1969,1972). Taxon-specific abundance: The collected material was analysed using the method of Domov (1959). Samples were brought to volume of 25-30 ml depending upon zooplankton density and mixed intensively until all organisms were distributed randomly in the sample volume. After that 5 ml of sample was taken and poured in the counting chamber which is a rectangle form for taxomomic identification and count. Copepods and Cladoceras were identified and enumerated; the other mesozooplankters were identified and enumerated at higher taxonomic level (commonly named as mesozooplankton groups). Large (> 1 mm body length) and not abundant species were calculated in whole sample. Counting and measuring of organisms were made in the Dimov chamber under the stereomicroscope to the lowest taxon possible. Taxonomic identification was done at the Institute of Oceanology by Lyudmila Kamburska using the relevant taxonomic literature (Mordukhay-Boltovskoy, F.D. (Ed.). 1968, 1969,1972).

Entrevista a Angela McRobbie : los estudios culturales y el imperativo de entender y explicar los cambios sociales

Angela McRobbie es socióloga y dirige el Departamento de Comunicación en Goldsmiths College, Universidad de Londres. En la actualidad, se encuentra entre las referentes más destacadas de los Estudios Culturales británicos. Ha publicado numerosos ensayos en revistas internacionales sobre problemáticas vinculadas con la juventud, los estilos musicales y los consumos culturales, así como ha indagado en los cambios sociales y políticos ocurridos desde los tiempos del thatcherismo. Entre sus libros, sobresalen: Postmodernism and Popular Culture (Routledge, 1994); Feminism and Youth Culture (Macmillan, 1994); Back to Reality? Social Experience and Cultural Studies (Manchester University Press, 1997); British Fashion Design (1998), In the Culture Society. Art, Fashion and Popular Music (Routledge, 1999) y compiló junto a Paul Gilroy y Lawrence Grossberg, Without Guarantees. In Honour of Stuart Hall (Verso, 2000), con motivo del retiro de éste de la Open University en 1997.

Modelling of the TICS Catalyse : Realization of a project

An action of modelling of the Territorial Intelligence Community Systems or TICS began in 2009 at the end of the CaEnti project. It has several objectives: - Establish a set of documents understandable by computer specialists who are in charge of software developments, and by territorial intelligence specialists. - Lay the foundation of a vocabulary describing the main notions of TICS domain. - Ensure the evolution and sustainability of tools and systems, in a highly scalable research context. The definition of models representing the data manipulated by the tools of the suitcase Catalyse is not sufficient to describe in a complete way the TICS domain. We established a correspondence between this computer vocabulary and vocabulary related to the theme to allow communication between computer scientists and territorial intelligence specialists. Furthermore it is necessary to describe the roles of TICS. For that it is interesting to use other kinds of computing models. In this communication we present the modelling of TICS project with business process

El plan estratégico Argentina Apícola 2017 y su influencia en el sector apícola de la localidad de Tandil

By means of this paper is to critically analyze the current situation of beekeeping in the town of Tandil (Buenos Aires), from the objectives set out in the Strategic Plan Argentina Beekeeping 2017, approved in 2008, whose goal is aimed at that country from becoming a global market leader of value-added bee products, ensuring sustainable development in economic, environmental and social. At first briefly reviews the national bee scene, in which Argentina is known for being the third largest producer of honey, after China and the U.S., while competing with China for the first world exporter, a situation that contrasts with low domestic consumption. Then describes the strategic objectives that promotes the Plan, including: marketing, production, promotion and added value. Then we analyze the main characteristics of the honey industry in the area chosen, the town of Tandil, where the stage is characterized by a large number of small producers who are mostly engaged in the informal sale of honey for direct consumption but whose demand is low, compared to a small number of collectors, packers and exporters that dominate the international market. In general it is observed that, with few exceptions, the honey is exported in bulk, as a commodity, and its main use molasses to improve lower quality of recipient countries. Meanwhile the honey for local consumption, is usually of inferior quality because they generally are not subject to quality controls required by the circuit of export. To overcome the limitations of beekeeping above, highlights the collaborative efforts of government agencies such as the National Institute of Agricultural Technology (INTA) and the Faculty of Veterinary Science, National University Centre of the Province of Buenos Aires. As a preliminary conclusion, it is argued that the Strategic Plan Argentina Beekeeping is still valid as a tool for development of the sector, and is also essential to encourage the development of competitive products in terms of quality and differentiation, through the development of technology and knowledge sharing to ensure growth and sustainability of beekeeping in the town of Tandil