Theory and phenomenology of two-higgs-doublet models

We discuss theoretical and phenomenological aspects of two-Higgs-doublet extensions of the Standard Model. In general, these extensions have scalar mediated flavour changing neutral currents which are strongly constrained by experiment. Various strategies are discussed to control these flavour changing scalar currents and their phenomenological consequences are analysed. In particular, scenarios with natural flavour conservation are investigated, including the so-called type I and type II models as well as lepton-specific and inert models. Type III models are then discussed, where scalar flavour changing neutral currents are present at tree level, but are suppressed by either a specific ansatz for the Yukawa couplings or by the introduction of family symmetries leading to a natural suppression mechanism. We also consider the phenomenology of charged scalars in these models. Next we turn to the role of symmetries in the scalar sector. We discuss the six symmetry-constrained scalar potentials and their extension into the fermion sector. The vacuum structure of the scalar potential is analysed, including a study of the vacuum stability conditions on the potential and the renormalization-group improvement of these conditions is also presented. The stability of the tree level minimum of the scalar potential in connection with electric charge conservation and its behaviour under CP is analysed. The question of CP violation is addressed in detail, including the cases of explicit CP violation and spontaneous CP violation. We present a detailed study of weak basis invariants which are odd under CP. These invariants allow for the possibility of studying the CP properties of any two-Higgs-doublet model in an arbitrary Higgs basis. A careful study of spontaneous CP violation is presented, including an analysis of the conditions which have to be satisfied in order for a vacuum to violate CP. We present minimal models of CP violation where the vacuum phase is sufficient to generate a complex CKM matrix, which is at present a requirement for any realistic model of spontaneous CP violation.

Human and climatic change impact modelling on the habitat suitability for the chimpanzee (Pan troglodytes ellioti) – Case study: The proposed Mount Cameroon National Park

Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial Technologies

Historically accurate reconstructions and characterisation of chrome yellow pigments

Dissertation presented at the Faculty of Sciences and Technology of the New University of Lisbon in fulfillment of the requirements for the Master degree in Conservation Science

Morbidity and survival in advanced AIDS in Rio de Janeiro, Brazil

Opportunistic diseases (OD) are the most common cause of death in AIDS patients. To access the incidence of OD and survival in advanced immunodeficiency, we included 79 patients with AIDS treated at Hospital Evandro Chagas (FIOCRUZ) from September 1997 to December 1999 with at least one CD4 count <=100 cells/mm³. The incidence of OD was analyzed by Poisson's regression, and survival by Kaplan Meier and Cox analysis, considering a retrospective (before CD4 <=100 cells/mm³) and a prospective (after CD4 <=100 cells/mm³) period, and controlling for demographic, clinical and laboratory characteristics. The confidence interval estipulated was 95%. Mean follow-up period was 733 days (CI = 683-782). During the study 9 (11.4%) patients died. Survival from AIDS diagnosis was a mean of 2589 days (CI = 2363-2816) and from the date of the CD4 count CD4 <=100 cells/mm³ was a mean of 1376 (CI = 1181-1572) days. Incidence of OD was 0.51 pp/y before CD4 <= 100 cells/mm³ and 0.29 pp/y after CD4 <= 100 cells/mm³. A lower number of ODs before CD4 < 100 cells/mm³ was associated with lower incidence rates after CD4 <= 100 cells/mm³. AIDS diagnosis based on CD4+ counts <= 200 cells/mm³ was associated with lower incidence rates after CD4 <= 100 cells/mm³. Baseline CD4 counts above 50 cells/mm³ (HR = 0.13) and restoration of baseline CD4+ counts above 100 cells/mm³ (HR = 0.16) were associated with a lower risk of death. Controling both variables, only restoration of baseline counts was statistically significant (HR = 0.22, p = 0.04). We found a very low incidence of OD and long survival after CD4 < 100 cells/mm³. Survival was significantly associated with restoration of baseline CD4 counts above 100 cells/mm³.

Re-Use Assessment of Thermoset Composite Wastes as Aggregate and Filler Replacement for Concrete-Polymer Composite Materials: A case study regarding GFRP pultrusion wastes

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both the cross-linked nature of thermoset resins, which cannot be remoulded, and the complex composition of the composite itself, which includes glass fibres, polymer matrix and different types of inorganic fillers. Hence, to date, most of the thermoset based GFRP waste is being incinerated or landfilled leading to negative environmental impacts and additional costs to producers and suppliers. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, the effect of the incorporation of mechanically recycled GFRP pultrusion wastes on flexural and compressive behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates (0%, 4%, 8% and 12%, w/w), with distinct size grades (coarse fibrous mixture and fine powdered mixture), were incorporated into polyester PM as sand aggregates and filler replacements. The effect of the incorporation of a silane coupling agent was also assessed. Experimental results revealed that GFRP waste filled polymer mortars show improved mechanical behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse as raw material in concrete-polymer composites.

Rehabilitation of renders of old buildings in Portugal: survey, supporting methodology proposal and case study

The main purpose of the research is to present a proposal for a methodology to support the rehabilitation project of renders of old buildings in Portugal. To achieve the objective it was considered essential to define the main types of participants and aspects to integrate the proposal. The research methodology consists in an inquiry presented to professional participants in rehabilitation, a market study of materials and products available in Portugal, the design of a methodology proposal and its application to a case study. The inquiry sample totals 24 answers from the targeted professionals. A sequence of relevant supporting procedures consists in the proposal, which aims to provide a supporting methodology to decide and project in this context and also to be tested with its application to the building. This proposal was applied to an old building with load-bearing stone masonry walls and air-lime based renders. It was concluded that the assessment of the building and external renderings’ condition, its diagnosis and of the supporting walls, the definition of intervention, the specification of materials to be used and performance requirements to comply, and also plans for conservation and periodic maintenance, are crucial. From the inquiry, compatibility between materials and complementary roles and points of view of different types of participants in rehabilitation must be highlighted. A proposal for a methodology to support the project could provide useful guidance particularly for architects and construction engineers, and improve the understanding of direct participants on site, therefore contributing for the correct implementation of intervention.

Rehabilitation of renders of old buildings in Portugal: survey, supporting methodology proposal and case studies

The main purpose of the research is to present a proposal for a methodology to support the rehabilitation project of renders of old buildings. To achieve the objective it was considered essential to define the main types of participants and aspects to integrate the proposal. The research methodology consists in an inquiry presented to several professional participants in rehabilitation, a market study of materials and products available in Portugal, the design of a methodology proposal and its application to a case study. The inquiry sample totals 24 answers from the targeted professionals. A sequence of relevant supporting procedures consists in the proposal, which aims to provide a supporting methodology to decide and project in this context and also to be tested with its application to the building. This proposal was applied to an old building with load-bearing stone masonry walls and air-lime based renders. It was concluded that the assessment of the building and external renderings’ condition, its diagnosis and of the supporting walls, the definition of intervention, the specification of materials to be used and performance requirements to comply, and also plans for conservation and periodic maintenance, are crucial. From the inquiry, compatibility between materials and complementary roles and points of view of different types of participants in rehabilitation must be highlighted. A proposal for a methodology to support the project could provide useful guidance particularly for architects and construction engineers, and improve the understanding of direct participants on site, therefore contributing for the correct implementation of the intervention.

Perylene Diimide acceptors: Fabrication and characterization of electron-only, hole-only devices and solar cells

The thrust towards energy conservation and reduced environmental footprint has fueled intensive research for alternative low cost sources of renewable energy. Organic photovoltaic cells (OPVs), with their low fabrication costs, easy processing and flexibility, represent a possible viable alternative. Perylene diimides (PDIs) are promising electron-acceptor candidates for bulk heterojunction (BHJ) OPVs, as they combine higher absorption and stability with tunable material properties, such as solubility and position of the lowest unoccupied molecular orbital (LUMO) level. A prerequisite for trap free electron transport is for the LUMO to be located at a level deeper than 3.7 eV since electron trapping in organic semiconductors is universal and dominated by a trap level located at 3.6 eV. Although the mostly used fullerene acceptors in polymer:fullerene solar cells feature trap-free electron transport, low optical absorption of fullerene derivatives limits maximum attainable efficiency. In this thesis, we try to get a better understanding of the electronic properties of PDIs, with a focus on charge carrier transport characteristics and the effect of different processing conditions such as annealing temperature and top contact (cathode) material. We report on a commercially available PDI and three PDI derivatives as acceptor materials, and its blends with MEH-PPV (Poly[2-methoxy 5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) and P3HT (Poly(3-hexylthiophene-2,5-diyl)) donor materials in single carrier devices (electron-only and hole-only) and in solar cells. Space-charge limited current measurements and modelling of temperature dependent J-V characteristics confirmed that the electron transport is essentially trap-free in such materials. Different blend ratios of P3HT:PDI-1 (1:1) and (1:3) show increase in the device performance with increasing PDI-1 ratio. Furthermore, thermal annealing of the devices have a significant effect in the solar cells that decreases open-circuit voltage (Voc) and fill factor FF, but increases short-circuit current (Jsc) and overall device performance. Morphological studies show that over-aggregation in traditional donor:PDI blend systems is still a big problem, which hinders charge carrier transport and performance in solar cells.

Assessment and management of the geomorphological heritage of Monte Pindo (NW Spain): a landscape as a symbol of identity

This study focuses on the granite mountain known as Monte Pindo (627 m above sea level) in the Autonomous Community of Galicia (NW Spain). This territory is included in the area classified as “Costa da Morte” in the “Politica de Ordenación Litoral” (POL) (Coastal Planning Policy) for the region of Galicia. This coastal unit, located between “Rías Baixas” and “Cape Fisterra” has great potential for demonstrating geological processes and its geomorphological heritage is characterized by a high degree of geodiversity of granite landforms. The main objective of our work is to assess the geomorphological heritage of the site, thus revealing its wide geodiversity. We shall analyze and highlight: its scientific value, developing an inventory of granite landforms; its educational valuel and its geotouristic potential. It must be ensured that the Administration understands that natural diversity is composed of both geodiversity and biodiversity. Only then will the sustainable management of Monte Pindo become possible by integrating natural and cultural heritage values. The goal is to ensure that Monte Pindo and its immediate surroundings become a geopark with the aim of promoting local development projects based on the conservation and valorization of its geological heritage.

Predicting the distribution of forest tree species using topographic variables and vegetation index in eastern Acre, Brazil

Species distribution modeling has relevant implications for the studies of biodiversity, decision making about conservation and knowledge about ecological requirements of the species. The aim of this study was to evaluate if the use of forest inventories can improve the estimation of occurrence probability, identify the limits of the potential distribution and habitat preference of a group of timber tree species. The environmental predictor variables were: elevation, slope, aspect, normalized difference vegetation index (NDVI) and height above the nearest drainage (HAND). To estimate the distribution of species we used the maximum entropy method (Maxent). In comparison with a random distribution, using topographic variables and vegetation index as features, the Maxent method predicted with an average accuracy of 86% the geographical distribution of studied species. The altitude and NDVI were the most important variables. There were limitations to the interpolation of the models for non-sampled locations and that are outside of the elevation gradient associated with the occurrence data in approximately 7% of the basin area. Ceiba pentandra (samaúma), Castilla ulei (caucho) and Hura crepitans (assacu) is more likely to occur in nearby water course areas. Clarisia racemosa (guariúba), Amburana acreana (cerejeira), Aspidosperma macrocarpon (pereiro), Apuleia leiocarpa (cumaru cetim), Aspidosperma parvifolium (amarelão) and Astronium lecointei (aroeira) can also occur in upland forest and well drained soils. This modeling approach has potential for application on other tropical species still less studied, especially those that are under pressure from logging.

Pharmacological evaluation of plant extracts from Chapada Diamantina (Bahia, Brazil): Focus on antioxidant and cytotoxic properties

Tese de Doutoramento em Biologia de Plantas MAP - Bioplant

Galictis cuja (Mammalia): an update of current knowledge and geographic distribution

The lesser grison (Galictis cuja) is one of the least-known mustelids in the Neotropics, despite its broad range across South America. This study aimed to explore current knowledge of the distribution of the species to identify gaps in knowledge and anticipate its full geographic distribution. Eighty-nine articles have mentioned G. cuja since 1969, but only 13 focused on the species. We generated a detailed model of the species' potential distribution that validated previous maps, but with improved detail, supporting previous southernmost records, and providing a means of identifying priority sites for conservation and management of the species.

Ecological conflicts and valuation - mangroves vs. shrimp in the late 1990s

Shrimps are produced in two different ways. They are fished in the sea (sometimes at the cost of turtle destruction) or they are "farmed" in ponds in coastal areas. Such aquaculture is increasing around the world as shrimps become a valuable item of world trade. Mangrove forests are sacrificed for commercial shrimp farming. This paper considers the conflict between mangrove conservation and shrimp exports in different countries.Who has title to the mangroves, who wins and who loses in this tragedy of enclosures? Which languages of valuation are used by different actors in order to compare the increase in shrimp exports and the losses in livelihoods and in environmental services? The economic valuation of damages is only one of the possible languages of valuation which are relevant in practice. Who has the power to impose a particular language of valuation?

Innovation, R&D spillovers and productivity: the role of knowledge-intensive services

This paper analyses the performance of companies’ R&D and innovation and the effects of intra- and inter-industry R&D spillover on firms’ productivity in Catalonia. The paper deals simultaneously with the performance of manufacturing and service firms, with the aim of highlighting the growing role of knowledge-intensive services in promoting innovation and productivity gains. We find that intra-industry R&D spillovers have an important effect on the productivity level of manufacturing firms, and the inter-industrial R&D spillovers related to computer and software services also play an important role, especially in high-tech manufacturing industries. The main conclusion is that the traditional classification of manufactured goods and services no longer makes sense in the ‘knowledge economy’ and in Catalonia the regional policy makers will have to design policies that favour inter-industrial R&D flows, especially from high-tech services.

Anàlisi socio-ambiental de les bordes de la Vall d'Estaon (Pallars Sobirà) i de la biodiversitat associada

Aquest projecte ha estat desenvolupat entre l’octubre de 2008 i el juliol de 2009 per un equip d’estudiants de Ciències Ambientals de la Universitat Autònoma de Barcelona. L’objecte d’estudi principal han estat les bordes, construccions agroramaderes utilitzades tradicionalment per a emmagatzemar l’herba i estabular-hi el bestiar. D’altra banda, pel que fa la biodiversitat, s’ha realitzat un estudi de la vegetació de pedra seca, i una primera aproximació a l’estudi dels rat-penats, espècies protegides que utilitzen les bordes com a refugi. L’àmbit d’estudi ha estat la Vall d'Estaon dins el municipi de Vall de Cardós, a la comarca del Pallars Sobirà, Catalunya. Tota la superfície d’estudi es troba dins de l’àmbit del Parc Natural de l’Alt Pirineu (PNAP) i, per tant, sota la seva protecció. Per a la realització d’aquest estudi, s’ha utilitzat la metodologia emprada en el projecte del Bosc de Virós (Mestres et al.,2007). S’elabora un inventari de bordes i un altre de biodiversitat a partir de les dades recopilades amb la observació al camp i es realitzen entrevistes als gestors de la zona, antics i nous propietaris. En l’anàlisi dels resultats, s’observa que les bordes han perdut la seva funcionalitat tradicional i moltes d’elles s’han abandonat. Aquests fets provoquen la degradació d’aquestes construccions i la conseqüent pèrdua de patrimoni. D’altra banda la idea de recuperar les activitats tradicionals esdevé poc realista i es combina amb la impossibilitat d’aplicar nous usos per la protecció que exerceix la figura de Parc Natural. Així doncs, les bordes es troben enmig d’una situació estàtica i paradoxal entre la voluntat i desig de conservació i l'imminent i accelerat procés d’abandonament i degradació.