Phylogeographic Structure and Karyotypic Diversity of the Brazilian Shrew Mouse (Blarinomys breviceps, Sigmodontinae) in the Atlantic Forest

Blarinomys breviceps possesses cryptic and burrowing habits with poorly documented genetics and life history traits. Due to its rarity, only a few specimens and DNA sequences have been deposited in collections worldwide. Here, we present the most comprehensive cytogenetic and molecular characterization of this rare genus. Phylogenetic analyses based on partial cytochrome b sequences were performed, attempting to establish the relationships among individuals with distinct karyotypes along the geographic distribution of the genus in the Atlantic Forest. Classical and molecular cytogenetics, using banding patterns and FISH of telomeric and whole chromosome X-specific painting probes (obtained from the Akodontini Akodon cursor) were used to characterize and compare the chromosomal complements. Molecular phylogenetic analyses recovered 2 main geographically structured clades, northeastern and southeastern with pair-wise sequence divergences among specimens varying between 4.9 and 8.4%. Eight distinct karyomorphs are described: (A) 2n = 52 (50A, XX), (B) 2n = 52 (48A, XY+2Bs), (C) 2n = 45 (42A, XY+1B), (D) 2n = 43 (37A, XX+4Bs), (E) 2n = 37 (34A, XY+1B), (F) 2n = 34 (32A, XX), (G) 2n = 31 (27A, XX+2Bs), (H) 2n = 28 (26A, XY), all with the same number of autosomal arms (FNA = 50). Variation of 0-4 supernumerary chromosomes (Bs) presenting heterogeneity in morphology and distribution of interstitial telomeric sequences (ITSs) is reported. ITSs are also found in some metacentric autosomes. The phylogeographic separation between 2 major lineages with high levels of genetic divergence, and the wide karyotypic diversity indicate that B. breviceps is a diverse group that warrants taxonomic re-evaluation. Copyright (C) 2012 S. Karger AG, Basel

Cyclosporin A causes impairment of the ventral prostate tissue structure of Wistar rats

Cyclosporin A (CsA) is an immunosuppressive drug widely used in medicine to reduce the immune system activity and, therefore, the risk of organ rejection after transplantation. However, many side effects can be related to its use, such as, reduction in serum testosterone levels due to damage of the testis structure and, consequently, male infertility. The present study aims to evaluate the effects of chronic CsA administration on the ventral prostate tissue ( 1 5 mg/kg per d, for 56 days). Stereological, morphometrical, morphological and ultrastructural observations were employed. The plasmatic testosterone and glucose levels were measured. An androgen receptor (AR) immunohistochemical method was applied on ventral prostate sections. Apoptosis was detected with the terminal deoxynucleotidyl transferase dUTP nick end labeling technique. CsA treatment caused reduction in plasmatic testosterone levels and an increase in glycemia. The volume of all ventral prostate tissue components (lumen, epithelium and muscular and nonmuscular stroma) and ventral prostate weight were reduced in the CsA-treated group. Light and transmission electron microscopy confirmed epithelium atrophy of treated animals. There was no alteration of AR expression or apoptotic index. CsA chronic treatment in the therapeutic doses caused damage to prostate tissue of adult Wistar rats, probably due to increase in the glucose levels and reduction in the plasmatic testosterone levels.

The Role of Dyslipidemia on Ocular Surface, Lacrimal and Meibomian Gland Structure and Function

Purpose: Dyslipidemia is characterized by high lipid blood levels that are risk factors for cardiovascular diseases, which are leading causes of death. However, it is unclear whether dyslipidemia is a cause of the dry eye syndrome (DES). Therefore we determined in transgenic mice models of dyslipidemia, whether there is an association with DES development. Methods: Dyslipidemic models included male and female adult mice overexpressing apolipoprotein CIII (Apo CIII), LDL receptor knockout (LDLR-KO) and ApoE knockout (ApoE-KO). They were compared with age-and gender-matched C57BL/6 mice. Ocular health was evaluated based on corneal slit lamp assessment, phenol red thread test (PRT) and impression cytology. Blood lipid profiles and histology of meibomian and lacrimal glands were also evaluated. Effects of high-fat diet and aging were observed in LDLR-KO and ApoCIII strains, respectively. Results: Body weight and lacrimal gland weight were significantly higher in male mice compared to females of the same strain (P < 0.05). Body weight was significantly lower in LDLRKO mice receiving high lipid diet compared to their controls (P = 0.0043). ApoE-KO were hypercholesterolemic and ApoCIII hypertriglyceridemic while LDLR-KO showed increases in both parameters. The PRT test was lower in male LDLR-KO mice with high-fat diet than control mice with standard diet (P = 0.0273). Aging did not affect lacrimal structural or functional parameters of ApoCIII strain. Conclusions: DES development is not solely dependent on dyslipidemia in relevant mice models promoting this condition. On the other hand, lacrimal gland structure and function are differentially impacted by lipid profile changes in male and female mice. This dissociation suggests that other factors beside dyslipidemia impact on tear film dysfunction and DES development.

Unraveling the structure of sugarcane bagasse after soaking in concentrated aqueous ammonia (SCAA) and ethanol production by Scheffersomyces (Pichia) stipitis

Abstract Background Fuel ethanol production from sustainable and largely abundant agro-residues such as sugarcane bagasse (SB) provides long term, geopolitical and strategic benefits. Pretreatment of SB is an inevitable process for improved saccharification of cell wall carbohydrates. Recently, ammonium hydroxide-based pretreatment technologies have gained significance as an effective and economical pretreatment strategy. We hypothesized that soaking in concentrated aqueous ammonia-mediated thermochemical pretreatment (SCAA) would overcome the native recalcitrance of SB by enhancing cellulase accessibility of the embedded holocellulosic microfibrils. Results In this study, we designed an experiment considering response surface methodology (Taguchi method, L8 orthogonal array) to optimize sugar recovery from ammonia pretreated sugarcane bagasse (SB) by using the method of soaking in concentrated aqueous ammonia (SCAA-SB). Three independent variables: ammonia concentration, temperature and time, were selected at two levels with center point. The ammonia pretreated bagasse (SCAA-SB) was enzymatically hydrolysed by commercial enzymes (Celluclast 1.5 L and Novozym 188) using 15 FPU/g dry biomass and 17.5 Units of β-glucosidase/g dry biomass at 50°C, 150 rpm for 96 h. A maximum of 28.43 g/l reducing sugars corresponding to 0.57 g sugars/g pretreated bagasse was obtained from the SCAA-SB derived using a 20% v/v ammonia solution, at 70°C for 24 h after enzymatic hydrolysis. Among the tested parameters, pretreatment time showed the maximum influence (p value, 0.053282) while ammonia concentration showed the least influence (p value, 0.612552) on sugar recovery. The changes in the ultra-structure and crystallinity of native SCAA-SB and enzymatically hydrolysed SB were observed by scanning electron microscopy (SEM), x-ray diffraction (XRD) and solid-state 13C nuclear magnetic resonance (NMR) spectroscopy. The enzymatic hydrolysates and solid SCAA-SB were subjected to ethanol fermentation under separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) by Scheffersomyces (Pichia) stipitis NRRL Y-7124 respectively. Higher ethanol production (10.31 g/l and yield, 0.387 g/g) was obtained through SSF than SHF (3.83 g/l and yield, 0.289 g/g). Conclusions SCAA treatment showed marked lignin removal from SB thus improving the accessibility of cellulases towards holocellulose substrate as evidenced by efficient sugar release. The ultrastructure of SB after SCAA and enzymatic hydrolysis of holocellulose provided insights of the degradation process at the molecular level.

Genetic diversity and population structure of Musa accessions in ex situ conservation

Abstract Background Banana cultivars are mostly derived from hybridization between wild diploid subspecies of Musa acuminata (A genome) and M. balbisiana (B genome), and they exhibit various levels of ploidy and genomic constitution. The Embrapa ex situ Musa collection contains over 220 accessions, of which only a few have been genetically characterized. Knowledge regarding the genetic relationships and diversity between modern cultivars and wild relatives would assist in conservation and breeding strategies. Our objectives were to determine the genomic constitution based on Internal Transcribed Spacer (ITS) regions polymorphism and the ploidy of all accessions by flow cytometry and to investigate the population structure of the collection using Simple Sequence Repeat (SSR) loci as co-dominant markers based on Structure software, not previously performed in Musa. Results From the 221 accessions analyzed by flow cytometry, the correct ploidy was confirmed or established for 212 (95.9%), whereas digestion of the ITS region confirmed the genomic constitution of 209 (94.6%). Neighbor-joining clustering analysis derived from SSR binary data allowed the detection of two major groups, essentially distinguished by the presence or absence of the B genome, while subgroups were formed according to the genomic composition and commercial classification. The co-dominant nature of SSR was explored to analyze the structure of the population based on a Bayesian approach, detecting 21 subpopulations. Most of the subpopulations were in agreement with the clustering analysis. Conclusions The data generated by flow cytometry, ITS and SSR supported the hypothesis about the occurrence of homeologue recombination between A and B genomes, leading to discrepancies in the number of sets or portions from each parental genome. These phenomenons have been largely disregarded in the evolution of banana, as the “single-step domestication” hypothesis had long predominated. These findings will have an impact in future breeding approaches. Structure analysis enabled the efficient detection of ancestry of recently developed tetraploid hybrids by breeding programs, and for some triploids. However, for the main commercial subgroups, Structure appeared to be less efficient to detect the ancestry in diploid groups, possibly due to sampling restrictions. The possibility of inferring the membership among accessions to correct the effects of genetic structure opens possibilities for its use in marker-assisted selection by association mapping.

Temporal changes of CB1 cannabinoid receptor in the basal ganglia as a possible structure-specific plasticity process in 6-OHDA lesioned rats

The endocannabinoid system has been implicated in several neurobiological processes, including neurodegeneration, neuroprotection and neuronal plasticity. The CB1 cannabinoid receptors are abundantly expressed in the basal ganglia, the circuitry that is mostly affected in Parkinson’s Disease (PD). Some studies show variation of CB1 expression in basal ganglia in different animal models of PD, however the results are quite controversial, due to the differences in the procedures employed to induce the parkinsonism and the periods analyzed after the lesion. The present study evaluated the CB1 expression in four basal ganglia structures, namely striatum, external globus pallidus (EGP), internal globus pallidus (IGP) and substantia nigra pars reticulata (SNpr) of rats 1, 5, 10, 20, and 60 days after unilateral intrastriatal 6-hydroxydopamine injections, that causes retrograde dopaminergic degeneration. We also investigated tyrosine hydroxylase (TH), parvalbumin, calbindin and glutamic acid decarboxylase (GAD) expression to verify the status of dopaminergic and GABAergic systems. We observed a structure-specific modulation of CB1 expression at different periods after lesions. In general, there were no changes in the striatum, decreased CB1 in IGP and SNpr and increased CB1 in EGP, but this increase was not sustained over time. No changes in GAD and parvalbumin expression were observed in basal ganglia, whereas TH levels were decreased and the calbindin increased in striatum in short periods after lesion. We believe that the structure-specific variation of CB1 in basal ganglia in the 6-hydroxydopamine PD model could be related to a compensatory process involving the GABAergic transmission, which is impaired due to the lack of dopamine. Our data, therefore, suggest that the changes of CB1 and calbindin expression may represent a plasticity process in this PD model

Differences in diversity, structure, and variability between intertidal and subtidal meiofaunal assemblages

[EN] Meiofaunal assemblages from intertidal and shallow subtidal seabeds were studied at two sites (one dominated by volcanic sands and the other by organogenic sands) at Tenerife (Canary Islands, NE Atlantic Ocean) throughout an entire year (May 2000?April 2001). Specifically, we aimed (i) to test for differences in diversity, structure, and stability between intertidal and subtidal meiofaunal assemblages, and (ii) to determine if differences in the meiofaunal assemblage structure may be explained by environmental factors (granulometric composition, availability of organic matter, and carbonate content in sediments). A total of 103,763 meiofaunal individuals were collected, including 203 species from 19 taxonomic groups (Acari, Amphipoda, Cnidaria, Copepoda, Echinodermata, Gastrotricha, Isopoda, Insecta, Kinorrhyncha, Misidacea, Nematoda, Nemertini, Oligochaeta, Ostracoda, Polychaeta, Priapulida, Sipuncula, Tanaidacea, and Turbellaria). Nematodes were the most abundant taxonomic group. Species diversity was higher in the subtidal than in the intertidal zone at both sites, as a result of the larger dominance of a few species in the intertidal zone. The meiofaunal assemblage structure was different between tidal levels at both sites, the intertidal presenting greater temporal variability (multivariate dispersion) in the meiofaunal assemblage structure than the subtidal. Sediment grain size, here quantified by the different granulometric fractions, explained the variability in meiofaunal assemblage structure to a greater extent than the percentage of carbonates, a variable linked to sediment origin. This study revealed differences in diversity, assemblage structure, and variability between intertidal and subtidal meiofauna.

PepT1 mRNA expression levels in sea bream (Sparus aurata) fed different plant protein sources

[EN] The expression and regulation of intestinal oligopeptide transporter (PepT)-1 when vegetable sources are used as a substitute for fish meal in the diet of marine fish has not yet been explored. In the present study, as part of our ongoing work on elucidating PepT1 gene expression in relation to different dietary treatments, we have now isolated and deposited in Genbank database (accession no. GU733710) a cDNA sequence representing the PepT1 in the sea bream (Sparus aurata). The ?de novo? prediction of the three-dimensional structure of PepT1 protein is presented. We also analyzed diet-induced changes in the expression of PepT1 mRNA via real-time RT-PCR using the standard curve method. Sea bream were fed for 140 days with one of the following four diet formulations (43% protein/21% lipid): a control fast growth-promoting diet (C), and three diets with the same formulation but in which 15% of the fish meal was substituted by protein concentrates either from lupine (LPC), chick pea (CPC), or green pea (PPC). Fish fed PPC had significantly (p < 0.05) lower levels of PepT1 transcripts in the proximal intestine than the controls, whereas PepT1 transcript levels in fish fed LPC or CPC were not significantly different from the controls. Although growth was similar between fish fed with different diets during the first 72 days of feeding, growth of the fish fed with PPC was reduced during the second part of the trial and was significantly (p < 0.05) lower than fish fed LPC and CPC diets by the end of the experiment. Correlation between these results and fish growth performances highlights that the intestinal PepT1 mRNA level may serve as a useful marker of the dietary protein quality and absorption efficiency.

Computational analyses on the structure-function relation in ion channels

Ion channels are protein molecules, embedded in the lipid bilayer of the cell membranes. They act as powerful sensing elements switching chemicalphysical stimuli into ion-fluxes. At a glance, ion channels are water-filled pores, which can open and close in response to different stimuli (gating), and one once open select the permeating ion species (selectivity). They play a crucial role in several physiological functions, like nerve transmission, muscular contraction, and secretion. Besides, ion channels can be used in technological applications for different purpose (sensing of organic molecules, DNA sequencing). As a result, there is remarkable interest in understanding the molecular determinants of the channel functioning. Nowadays, both the functional and the structural characteristics of ion channels can be experimentally solved. The purpose of this thesis was to investigate the structure-function relation in ion channels, by computational techniques. Most of the analyses focused on the mechanisms of ion conduction, and the numerical methodologies to compute the channel conductance. The standard techniques for atomistic simulation of complex molecular systems (Molecular Dynamics) cannot be routinely used to calculate ion fluxes in membrane channels, because of the high computational resources needed. The main step forward of the PhD research activity was the development of a computational algorithm for the calculation of ion fluxes in protein channels. The algorithm - based on the electrodiffusion theory - is computational inexpensive, and was used for an extensive analysis on the molecular determinants of the channel conductance. The first record of ion-fluxes through a single protein channel dates back to 1976, and since then measuring the single channel conductance has become a standard experimental procedure. Chapter 1 introduces ion channels, and the experimental techniques used to measure the channel currents. The abundance of functional data (channel currents) does not match with an equal abundance of structural data. The bacterial potassium channel KcsA was the first selective ion channels to be experimentally solved (1998), and after KcsA the structures of four different potassium channels were revealed. These experimental data inspired a new era in ion channel modeling. Once the atomic structures of channels are known, it is possible to define mathematical models based on physical descriptions of the molecular systems. These physically based models can provide an atomic description of ion channel functioning, and predict the effect of structural changes. Chapter 2 introduces the computation methods used throughout the thesis to model ion channels functioning at the atomic level. In Chapter 3 and Chapter 4 the ion conduction through potassium channels is analyzed, by an approach based on the Poisson-Nernst-Planck electrodiffusion theory. In the electrodiffusion theory ion conduction is modeled by the drift-diffusion equations, thus describing the ion distributions by continuum functions. The numerical solver of the Poisson- Nernst-Planck equations was tested in the KcsA potassium channel (Chapter 3), and then used to analyze how the atomic structure of the intracellular vestibule of potassium channels affects the conductance (Chapter 4). As a major result, a correlation between the channel conductance and the potassium concentration in the intracellular vestibule emerged. The atomic structure of the channel modulates the potassium concentration in the vestibule, thus its conductance. This mechanism explains the phenotype of the BK potassium channels, a sub-family of potassium channels with high single channel conductance. The functional role of the intracellular vestibule is also the subject of Chapter 5, where the affinity of the potassium channels hEag1 (involved in tumour-cell proliferation) and hErg (important in the cardiac cycle) for several pharmaceutical drugs was compared. Both experimental measurements and molecular modeling were used in order to identify differences in the blocking mechanism of the two channels, which could be exploited in the synthesis of selective blockers. The experimental data pointed out the different role of residue mutations in the blockage of hEag1 and hErg, and the molecular modeling provided a possible explanation based on different binding sites in the intracellular vestibule. Modeling ion channels at the molecular levels relates the functioning of a channel to its atomic structure (Chapters 3-5), and can also be useful to predict the structure of ion channels (Chapter 6-7). In Chapter 6 the structure of the KcsA potassium channel depleted from potassium ions is analyzed by molecular dynamics simulations. Recently, a surprisingly high osmotic permeability of the KcsA channel was experimentally measured. All the available crystallographic structure of KcsA refers to a channel occupied by potassium ions. To conduct water molecules potassium ions must be expelled from KcsA. The structure of the potassium-depleted KcsA channel and the mechanism of water permeation are still unknown, and have been investigated by numerical simulations. Molecular dynamics of KcsA identified a possible atomic structure of the potassium-depleted KcsA channel, and a mechanism for water permeation. The depletion from potassium ions is an extreme situation for potassium channels, unlikely in physiological conditions. However, the simulation of such an extreme condition could help to identify the structural conformations, so the functional states, accessible to potassium ion channels. The last chapter of the thesis deals with the atomic structure of the !- Hemolysin channel. !-Hemolysin is the major determinant of the Staphylococcus Aureus toxicity, and is also the prototype channel for a possible usage in technological applications. The atomic structure of !- Hemolysin was revealed by X-Ray crystallography, but several experimental evidences suggest the presence of an alternative atomic structure. This alternative structure was predicted, combining experimental measurements of single channel currents and numerical simulations. This thesis is organized in two parts, in the first part an overview on ion channels and on the numerical methods adopted throughout the thesis is provided, while the second part describes the research projects tackled in the course of the PhD programme. The aim of the research activity was to relate the functional characteristics of ion channels to their atomic structure. In presenting the different research projects, the role of numerical simulations to analyze the structure-function relation in ion channels is highlighted.

Uncovering diversity and structure of bacteroidetes populations in marine environments

[EN]One of the main questions in microbial ecology is to understand what are the processes that structure and govern the species composition of communities. Answering to this question implies the need to detect bacterial species in environmental samples or at least to define ecologically meaningful “units of differentiation”. The dynamics and distribution of different broad taxonomic groups that constitute the bacterioplankton (at the phylum or class level) has been widely studied. The different large groups are known to follow different spatial distributions and seasonal cycles, but important variations also occur at lower levels (i.e. species or ecologically distinct populations). In this thesis we aimed to study some of these aspects for an important group of marine bacteria: the phylum Bacteroidetes.

Il passato nell’epoca della sua (ri)producibilità digitale. Torino 1943 - 45. Metodologia della ricerca con tecnologie informatiche. Sistema storico-territoriale di informazione multimediale

Se il lavoro dello storico è capire il passato come è stato compreso dalla gente che lo ha vissuto, allora forse non è azzardato pensare che sia anche necessario comunicare i risultati delle ricerche con strumenti propri che appartengono a un'epoca e che influenzano la mentalità di chi in quell'epoca vive. Emergenti tecnologie, specialmente nell’area della multimedialità come la realtà virtuale, permettono agli storici di comunicare l’esperienza del passato in più sensi. In che modo la storia collabora con le tecnologie informatiche soffermandosi sulla possibilità di fare ricostruzioni storiche virtuali, con relativi esempi e recensioni? Quello che maggiormente preoccupa gli storici è se una ricostruzione di un fatto passato vissuto attraverso la sua ricreazione in pixels sia un metodo di conoscenza della storia che possa essere considerato valido. Ovvero l'emozione che la navigazione in una realtà 3D può suscitare, è un mezzo in grado di trasmettere conoscenza? O forse l'idea che abbiamo del passato e del suo studio viene sottilmente cambiato nel momento in cui lo si divulga attraverso la grafica 3D? Da tempo però la disciplina ha cominciato a fare i conti con questa situazione, costretta soprattutto dall'invasività di questo tipo di media, dalla spettacolarizzazione del passato e da una divulgazione del passato parziale e antiscientifica. In un mondo post letterario bisogna cominciare a pensare che la cultura visuale nella quale siamo immersi sta cambiando il nostro rapporto con il passato: non per questo le conoscenze maturate fino ad oggi sono false, ma è necessario riconoscere che esiste più di una verità storica, a volte scritta a volte visuale. Il computer è diventato una piattaforma onnipresente per la rappresentazione e diffusione dell’informazione. I metodi di interazione e rappresentazione stanno evolvendo di continuo. Ed è su questi due binari che è si muove l’offerta delle tecnologie informatiche al servizio della storia. Lo scopo di questa tesi è proprio quello di esplorare, attraverso l’utilizzo e la sperimentazione di diversi strumenti e tecnologie informatiche, come si può raccontare efficacemente il passato attraverso oggetti tridimensionali e gli ambienti virtuali, e come, nel loro essere elementi caratterizzanti di comunicazione, in che modo possono collaborare, in questo caso particolare, con la disciplina storica. La presente ricerca ricostruisce alcune linee di storia delle principali fabbriche attive a Torino durante la seconda guerra mondiale, ricordando stretta relazione che esiste tra strutture ed individui e in questa città in particolare tra fabbrica e movimento operaio, è inevitabile addentrarsi nelle vicende del movimento operaio torinese che nel periodo della lotta di Liberazione in città fu un soggetto politico e sociale di primo rilievo. Nella città, intesa come entità biologica coinvolta nella guerra, la fabbrica (o le fabbriche) diventa il nucleo concettuale attraverso il quale leggere la città: sono le fabbriche gli obiettivi principali dei bombardamenti ed è nelle fabbriche che si combatte una guerra di liberazione tra classe operaia e autorità, di fabbrica e cittadine. La fabbrica diventa il luogo di "usurpazione del potere" di cui parla Weber, il palcoscenico in cui si tengono i diversi episodi della guerra: scioperi, deportazioni, occupazioni .... Il modello della città qui rappresentata non è una semplice visualizzazione ma un sistema informativo dove la realtà modellata è rappresentata da oggetti, che fanno da teatro allo svolgimento di avvenimenti con una precisa collocazione cronologica, al cui interno è possibile effettuare operazioni di selezione di render statici (immagini), di filmati precalcolati (animazioni) e di scenari navigabili interattivamente oltre ad attività di ricerca di fonti bibliografiche e commenti di studiosi segnatamente legati all'evento in oggetto. Obiettivo di questo lavoro è far interagire, attraverso diversi progetti, le discipline storiche e l’informatica, nelle diverse opportunità tecnologiche che questa presenta. Le possibilità di ricostruzione offerte dal 3D vengono così messe a servizio della ricerca, offrendo una visione integrale in grado di avvicinarci alla realtà dell’epoca presa in considerazione e convogliando in un’unica piattaforma espositiva tutti i risultati. Divulgazione Progetto Mappa Informativa Multimediale Torino 1945 Sul piano pratico il progetto prevede una interfaccia navigabile (tecnologia Flash) che rappresenti la pianta della città dell’epoca, attraverso la quale sia possibile avere una visione dei luoghi e dei tempi in cui la Liberazione prese forma, sia a livello concettuale, sia a livello pratico. Questo intreccio di coordinate nello spazio e nel tempo non solo migliora la comprensione dei fenomeni, ma crea un maggiore interesse sull’argomento attraverso l’utilizzo di strumenti divulgativi di grande efficacia (e appeal) senza perdere di vista la necessità di valicare le tesi storiche proponendosi come piattaforma didattica. Un tale contesto richiede uno studio approfondito degli eventi storici al fine di ricostruire con chiarezza una mappa della città che sia precisa sia topograficamente sia a livello di navigazione multimediale. La preparazione della cartina deve seguire gli standard del momento, perciò le soluzioni informatiche utilizzate sono quelle fornite da Adobe Illustrator per la realizzazione della topografia, e da Macromedia Flash per la creazione di un’interfaccia di navigazione. La base dei dati descrittivi è ovviamente consultabile essendo contenuta nel supporto media e totalmente annotata nella bibliografia. È il continuo evolvere delle tecnologie d'informazione e la massiccia diffusione dell’uso dei computer che ci porta a un cambiamento sostanziale nello studio e nell’apprendimento storico; le strutture accademiche e gli operatori economici hanno fatto propria la richiesta che giunge dall'utenza (insegnanti, studenti, operatori dei Beni Culturali) di una maggiore diffusione della conoscenza storica attraverso la sua rappresentazione informatizzata. Sul fronte didattico la ricostruzione di una realtà storica attraverso strumenti informatici consente anche ai non-storici di toccare con mano quelle che sono le problematiche della ricerca quali fonti mancanti, buchi della cronologia e valutazione della veridicità dei fatti attraverso prove. Le tecnologie informatiche permettono una visione completa, unitaria ed esauriente del passato, convogliando tutte le informazioni su un'unica piattaforma, permettendo anche a chi non è specializzato di comprendere immediatamente di cosa si parla. Il miglior libro di storia, per sua natura, non può farlo in quanto divide e organizza le notizie in modo diverso. In questo modo agli studenti viene data l'opportunità di apprendere tramite una rappresentazione diversa rispetto a quelle a cui sono abituati. La premessa centrale del progetto è che i risultati nell'apprendimento degli studenti possono essere migliorati se un concetto o un contenuto viene comunicato attraverso più canali di espressione, nel nostro caso attraverso un testo, immagini e un oggetto multimediale. Didattica La Conceria Fiorio è uno dei luoghi-simbolo della Resistenza torinese. Il progetto è una ricostruzione in realtà virtuale della Conceria Fiorio di Torino. La ricostruzione serve a arricchire la cultura storica sia a chi la produce, attraverso una ricerca accurata delle fonti, sia a chi può poi usufruirne, soprattutto i giovani, che, attratti dall’aspetto ludico della ricostruzione, apprendono con più facilità. La costruzione di un manufatto in 3D fornisce agli studenti le basi per riconoscere ed esprimere la giusta relazione fra il modello e l’oggetto storico. Le fasi di lavoro attraverso cui si è giunti alla ricostruzione in 3D della Conceria: . una ricerca storica approfondita, basata sulle fonti, che possono essere documenti degli archivi o scavi archeologici, fonti iconografiche, cartografiche, ecc.; . La modellazione degli edifici sulla base delle ricerche storiche, per fornire la struttura geometrica poligonale che permetta la navigazione tridimensionale; . La realizzazione, attraverso gli strumenti della computer graphic della navigazione in 3D. Unreal Technology è il nome dato al motore grafico utilizzato in numerosi videogiochi commerciali. Una delle caratteristiche fondamentali di tale prodotto è quella di avere uno strumento chiamato Unreal editor con cui è possibile costruire mondi virtuali, e che è quello utilizzato per questo progetto. UnrealEd (Ued) è il software per creare livelli per Unreal e i giochi basati sul motore di Unreal. E’ stata utilizzata la versione gratuita dell’editor. Il risultato finale del progetto è un ambiente virtuale navigabile raffigurante una ricostruzione accurata della Conceria Fiorio ai tempi della Resistenza. L’utente può visitare l’edificio e visualizzare informazioni specifiche su alcuni punti di interesse. La navigazione viene effettuata in prima persona, un processo di “spettacolarizzazione” degli ambienti visitati attraverso un arredamento consono permette all'utente una maggiore immersività rendendo l’ambiente più credibile e immediatamente codificabile. L’architettura Unreal Technology ha permesso di ottenere un buon risultato in un tempo brevissimo, senza che fossero necessari interventi di programmazione. Questo motore è, quindi, particolarmente adatto alla realizzazione rapida di prototipi di una discreta qualità, La presenza di un certo numero di bug lo rende, però, in parte inaffidabile. Utilizzare un editor da videogame per questa ricostruzione auspica la possibilità di un suo impiego nella didattica, quello che le simulazioni in 3D permettono nel caso specifico è di permettere agli studenti di sperimentare il lavoro della ricostruzione storica, con tutti i problemi che lo storico deve affrontare nel ricreare il passato. Questo lavoro vuole essere per gli storici una esperienza nella direzione della creazione di un repertorio espressivo più ampio, che includa gli ambienti tridimensionali. Il rischio di impiegare del tempo per imparare come funziona questa tecnologia per generare spazi virtuali rende scettici quanti si impegnano nell'insegnamento, ma le esperienze di progetti sviluppati, soprattutto all’estero, servono a capire che sono un buon investimento. Il fatto che una software house, che crea un videogame di grande successo di pubblico, includa nel suo prodotto, una serie di strumenti che consentano all'utente la creazione di mondi propri in cui giocare, è sintomatico che l'alfabetizzazione informatica degli utenti medi sta crescendo sempre più rapidamente e che l'utilizzo di un editor come Unreal Engine sarà in futuro una attività alla portata di un pubblico sempre più vasto. Questo ci mette nelle condizioni di progettare moduli di insegnamento più immersivi, in cui l'esperienza della ricerca e della ricostruzione del passato si intreccino con lo studio più tradizionale degli avvenimenti di una certa epoca. I mondi virtuali interattivi vengono spesso definiti come la forma culturale chiave del XXI secolo, come il cinema lo è stato per il XX. Lo scopo di questo lavoro è stato quello di suggerire che vi sono grosse opportunità per gli storici impiegando gli oggetti e le ambientazioni in 3D, e che essi devono coglierle. Si consideri il fatto che l’estetica abbia un effetto sull’epistemologia. O almeno sulla forma che i risultati delle ricerche storiche assumono nel momento in cui devono essere diffuse. Un’analisi storica fatta in maniera superficiale o con presupposti errati può comunque essere diffusa e avere credito in numerosi ambienti se diffusa con mezzi accattivanti e moderni. Ecco perchè non conviene seppellire un buon lavoro in qualche biblioteca, in attesa che qualcuno lo scopra. Ecco perchè gli storici non devono ignorare il 3D. La nostra capacità, come studiosi e studenti, di percepire idee ed orientamenti importanti dipende spesso dai metodi che impieghiamo per rappresentare i dati e l’evidenza. Perché gli storici possano ottenere il beneficio che il 3D porta con sè, tuttavia, devono sviluppare un’agenda di ricerca volta ad accertarsi che il 3D sostenga i loro obiettivi di ricercatori e insegnanti. Una ricostruzione storica può essere molto utile dal punto di vista educativo non sono da chi la visita ma, anche da chi la realizza. La fase di ricerca necessaria per la ricostruzione non può fare altro che aumentare il background culturale dello sviluppatore. Conclusioni La cosa più importante è stata la possibilità di fare esperienze nell’uso di mezzi di comunicazione di questo genere per raccontare e far conoscere il passato. Rovesciando il paradigma conoscitivo che avevo appreso negli studi umanistici, ho cercato di desumere quelle che potremo chiamare “leggi universali” dai dati oggettivi emersi da questi esperimenti. Da punto di vista epistemologico l’informatica, con la sua capacità di gestire masse impressionanti di dati, dà agli studiosi la possibilità di formulare delle ipotesi e poi accertarle o smentirle tramite ricostruzioni e simulazioni. Il mio lavoro è andato in questa direzione, cercando conoscere e usare strumenti attuali che nel futuro avranno sempre maggiore presenza nella comunicazione (anche scientifica) e che sono i mezzi di comunicazione d’eccellenza per determinate fasce d’età (adolescenti). Volendo spingere all’estremo i termini possiamo dire che la sfida che oggi la cultura visuale pone ai metodi tradizionali del fare storia è la stessa che Erodoto e Tucidide contrapposero ai narratori di miti e leggende. Prima di Erodoto esisteva il mito, che era un mezzo perfettamente adeguato per raccontare e dare significato al passato di una tribù o di una città. In un mondo post letterario la nostra conoscenza del passato sta sottilmente mutando nel momento in cui lo vediamo rappresentato da pixel o quando le informazioni scaturiscono non da sole, ma grazie all’interattività con il mezzo. La nostra capacità come studiosi e studenti di percepire idee ed orientamenti importanti dipende spesso dai metodi che impieghiamo per rappresentare i dati e l’evidenza. Perché gli storici possano ottenere il beneficio sottinteso al 3D, tuttavia, devono sviluppare un’agenda di ricerca volta ad accertarsi che il 3D sostenga i loro obiettivi di ricercatori e insegnanti. Le esperienze raccolte nelle pagine precedenti ci portano a pensare che in un futuro non troppo lontano uno strumento come il computer sarà l’unico mezzo attraverso cui trasmettere conoscenze, e dal punto di vista didattico la sua interattività consente coinvolgimento negli studenti come nessun altro mezzo di comunicazione moderno.

Mitochondrial Genomics: structure, inheritance and phylogenetic utility of the Mitochondrial genome in Bivalvia and Insecta

This PhD Thesis is the result of my research activity in the last three years. My main research interest was centered on the evolution of mitochondrial genome (mtDNA), and on its usefulness as a phylogeographic and phylogenetic marker at different taxonomic levels in different taxa of Metazoa. From a methodological standpoint, my main effort was dedicated to the sequencing of complete mitochondrial genomes, and the approach to whole-genome sequencing was based on the application of Long-PCR and shotgun sequences. Moreover, this research project is a part of a bigger sequencing project of mtDNAs in many different Metazoans’ taxa, and I mostly dedicated myself to sequence and analyze mtDNAs in selected taxa of bivalves and hexapods (Insecta). Sequences of bivalve mtDNAs are particularly limited, and my study contributed to extend the sampling. Moreover, I used the bivalve Musculista senhousia as model taxon to investigate the molecular mechanisms and the evolutionary significance of their aberrant mode of mitochondrial inheritance (Doubly Uniparental Inheritance, see below). In Insects, I focused my attention on the Genus Bacillus (Insecta Phasmida). A detailed phylogenetic analysis was performed in order to assess phylogenetic relationships within the genus, and to investigate the placement of Phasmida in the phylogenetic tree of Insecta. The main goal of this part of my study was to add to the taxonomic coverage of sequenced mtDNAs in basal insects, which were only partially analyzed.

Derivati polimerici organometallici ancorati su matrice inorganica per applicazioni in chimica fine

Organotin compounds have found in the last few decades a wide variety of applications. Indeed, they are used successfully as antifouling paints, PVC stabilizers and ion carriers, as well as homogeneous catalysts. In this context, it has been proved that the Lewis acidity of the metal centre allows these compounds to promote the reaction between alcohol and ester. However their use is now limited by their well-known toxicity, moreover they are hardly removable from the reaction mixture. This problem can be overcome by grafting the organotin derivative onto a polymeric cross-linked support. In this way the obtained heterogeneous catalyst can be easily filtered off from the reaction mixture, thus creating the so-called "clean organotin reagents", avoiding the presence of toxic organotin residues in solution and the tin release in the environment. In the last few years several insoluble polystyrene resins containing triorganotin carboxylate moieties have been synthesized with the aim of improving their catalytic activity: in particular we have investigated and opportunely modified their chemical structure in order to optimize the accessibility to the metal centre and its Lewis acidity. Recently, we replaced the polymeric matrix with an inorganic one, in order to dispose of a relatively cheaper and easily available support. For this purpose an ordered mesoporous silica, characterized by 2D-hexagonal pores, named MCM-41, and an amorphous silica have been selected. In the present work two kinds of MCM-41 silica containing the triorganotin carboxylate moiety have been synthesized starting from a commercial Cab-O-Sil M5 silica. These catalysts have two different spacers between the core and the tin-carboxylate moiety, namely a polyaliphatic chain (compound FT29) or a poliethereal one (compound FT6), with the aim to improve the interaction between catalyst and reacting ester. Three catalysts supported onto an amorphous silica have been also synthesized: the structure is the same as silica FT29, i.e. a compound having a polialiphatic chain, and they have different percentage of organotin derivative grafted on the silica surface (10, 30, 50% respectively for silica MB9, SU27 and SU28). The performances of the above silica as heterogeneous catalysts in transesterification reactions have been tested in a model reaction between ethyl acetate and 1-octanol, a primary alcohol sensitive to the reaction conditions. The alcohol conversion was assessed by gas-chromatography, determining the relative amount of transesterified product and starting alcohol after established time intervals.

Discotic materials for organic electronics

Die Kontrolle der ausgeprägten Aggregationsfähigkeit von alkylsubstituierten Hexa-peri-hexabenzocoronenen (HBC) wurde durch die Reduktion der intermolekularen Wechselwirkungen erreicht. Sterisch anspruchsvolle, verzweigte Alkylketten, mit einem Verzweigungspunkt naher des aromatischen Kerns, wurden in die Corona der aromatischen Scheiben eingebracht und verleihen den Derivaten Schmelzbarkeit ohne thermische Zersetzung. Dies erlaubte eine kostengünstige Verarbeitungstechniken direkt aus der Schmelze wie z.B. Zonenschmelzen, um uniaxial organisierte makroskopische Filme zu erhalten. Abhängig von dem sterischen Anspruch, der durch die Seitenkette erzeugt wird, wurden unterschiedliche molekulare Orientierungen auf Oberflächen erhalten, was eine wichtige Voraussetzung ist, um diskotische Materialien in elektronische Bauteile zu implementieren. Eine weitere Voraussetzung sind hohe Ladungsträgerbeweglichkeiten und Ladungsträgerlebenszeiten in den Halbleitermaterialien, die mit time-resolved pulse-radiolysis microwave conductivity (TR-PRMC) und time-of-flight (TOF) auch für die synthetisieren Materialien bestimmt wurden. Die neuen Materialien zeigten bereits in organischen Solarzellen gute Leistungen. Den Einfluss des Perimeters auf die elektronischen Eigenschaften der polyzyklischen aromatischen Kohlenwasserstoffe (PAKs) wurde theoretisch vorhergesagt und in dieser Arbeit durch die Synthese einer homologe Serie von PAKs experimentell bestätigt. Geht man von der „arm-chair“ Peripherie des HBC sukzessive zu einer partiellen „zickzack“ Peripherie, so findet man eine Abhängigkeit der elektronischen Banden von Symmetrie und Größe des aromatischen Systems. Die spontan ausgebildete Überstruktur dieser Derivate zeigte eine Abhängigkeit von Substitutionsmuster und der Natur der Alkylketten. Zusammenfassend wurden neben der Synthese von neuartigen Materialien für den Einsatz in der organischen Elektronik Synthesen entwickelt, die eine vereinfachte Funktionalisierung von ausgedehnten PAKs ermöglicht. Diese Konzepte erlauben eine Justierung der molekularen und supramolekularen Eigenschaften, eines der wichtigsten Voraussetzungen für den Einsatz von Materialien in elektronischen Bauelementen.

La nutrizione-idratazione artificiale è terapia? All'interfaccia tra scienza, diritto e bioetica, il fine vita in Italia, secondo una prospettiva di comunicazione della scienza post-accademica e Science&Technologies Studies (STS)

The question “artificial nutrition and hydration (ANH) is therapy or not?” is one of the key point of end-of-life issues in Italy, since it was (and it is also nowadays) a strategic and crucial point of the Italian Bioethics discussion about the last phases of human life: determining if ANH is therapy implies the possibility of being included in the list of treatments that could be mentioned for refusal within the living will document. But who is entitled to decide and judge if ANH is a therapy or not? Scientists? The Legislator? Judges? Patients? This issue at first sight seems just a matter of science, but at stake there is more than a scientific definition. According to several scholars, we are in the era of post-academic Science, in which Science broaden discussion, production, negotation and decision to other social groups that are not just the scientific communities. In this process, called co-production, on one hand scientific knowledge derives from the interaction between scientists and society at large. On the other hand, science is functional to co-production of social order. The continuous negotation on which science has to be used in social decisions is just the evidence of the mirroring negotation for different way to structure and interpret society. Thus, in the interaction between Science and Law, deciding what kind of Science could be suitable for a specific kind of Law, envisages a well defined idea of society behind this choice. I have analysed both the legislative path (still in progress) in the living will act production in Italy and Eluana Englaro’s judicial case (that somehow collapsed in the living will act negotiation), using official documents (hearings, texts of the official conference, committees comments and ruling texts) and interviewing key actors in the two processes from the science communication point of view (who talks in the name of science? Who defines what is a therapy? And how do they do?), finding support on the theoretical framework of the Science&Technologies Studies (S&TS).