Contrast discrimination and pattern masking: contrast gain control with fixed additive noise

We studied the visual mechanisms that serve to encode spatial contrast at threshold and supra-threshold levels. In a 2AFC contrast-discrimination task, observers had to detect the presence of a vertical 1 cycle deg-1 test grating (of contrast dc) that was superimposed on a similar vertical 1 cycle deg-1 pedestal grating, whereas in pattern masking the test grating was accompanied by a very different masking grating (horizontal 1 cycle deg-1, or oblique 3 cycles deg-1). When expressed as threshold contrast (dc at 75% correct) versus mask contrast (c) our results confirm previous ones in showing a characteristic 'dipper function' for contrast discrimination but a smoothly increasing threshold for pattern masking. However, fresh insight is gained by analysing and modelling performance (p; percent correct) as a joint function of (c, dc) - the performance surface. In contrast discrimination, psychometric functions (p versus logdc) are markedly less steep when c is above threshold, but in pattern masking this reduction of slope did not occur. We explored a standard gain-control model with six free parameters. Three parameters control the contrast response of the detection mechanism and one parameter weights the mask contrast in the cross-channel suppression effect. We assume that signal-detection performance (d') is limited by additive noise of constant variance. Noise level and lapse rate are also fitted parameters of the model. We show that this model accounts very accurately for the whole performance surface in both types of masking, and thus explains the threshold functions and the pattern of variation in psychometric slopes. The cross-channel weight is about 0.20. The model shows that the mechanism response to contrast increment (dc) is linearised by the presence of pedestal contrasts but remains nonlinear in pattern masking.

Motion sharpening and contrast:Gain control precedes compressive non-linearity?

Blurred edges appear sharper in motion than when they are stationary. We (Vision Research 38 (1998) 2108) have previously shown how such distortions in perceived edge blur may be accounted for by a model which assumes that luminance contrast is encoded by a local contrast transducer whose response becomes progressively more compressive as speed increases. If the form of the transducer is fixed (independent of contrast) for a given speed, then a strong prediction of the model is that motion sharpening should increase with increasing contrast. We measured the sharpening of periodic patterns over a large range of contrasts, blur widths and speeds. The results indicate that whilst sharpening increases with speed it is practically invariant with contrast. The contrast invariance of motion sharpening is not explained by an early, static compressive non-linearity alone. However, several alternative explanations are also inconsistent with these results. We show that if a dynamic contrast gain control precedes the static non-linear transducer then motion sharpening, its speed dependence, and its invariance with contrast, can be predicted with reasonable accuracy. © 2003 Elsevier Science Ltd. All rights reserved.

A model for motion sharpening: contrast gain control precedes compressive nonlinearity

Blurred edges appear sharper in motion than when they are stationary. We have previously shown how such distortions in perceived edge blur may be explained by a model which assumes that luminance contrast is encoded by a local contrast transducer whose response becomes progressively more compressive as speed increases. To test this model further, we measured the sharpening of drifting, periodic patterns over a large range of contrasts, blur widths, and speeds Human Vision. The results indicate that, while sharpening increased with speed, it was practically invariant with contrast. This contrast invariance cannot be explained by a fixed compressive nonlinearity since that predicts almost no sharpening at low contrasts.We show by computational modelling of spatiotemporal responses that, if a dynamic contrast gain control precedes the static nonlinear transducer, then motion sharpening, its speed dependence, and its invariance with contrast can be predicted with reasonable accuracy.

High-power picosecond pulse generation from a gain-switched violet diode laser

Generation of picosecond pulses with a peak power in excess of 7W and a duration of 24ps from a gain-switched InGaN diode laser is demonstrated for the first time.

On the adoption decision and the intensity of use of complementary innovations: The intra firm diffusion of management practices across UK establishments

This paper contributes to the literature on the intra-firm diffusion of innovations by investigating the factors that affect the firm’s decision to adopt and use sets of complementary innovations. We define complementary innovations those innovations whose joint use generates super additive gains, i.e. the gain from the joint adoption is higher than the sum of the gains derived from the adoption of each innovation in isolation. From a theoretical perspective, we present a simple decision model, whereby the firm decides ‘whether’ and ‘how much’ to invest in each of the innovations under investigation based upon the expected profit gain from each possible combination of adoption and use. The model shows how the extent of complementarity among the innovations can affect the firm’s profit gains and therefore the likelihood that the firm will adopt these innovations jointly, rather than individually. From an empirical perspective, we focus on four sets of management practices, namely operating (OMP), monitoring (MMP), targets (TMP) and incentives (IMP) management practices. We show that these sets of practices, although to a different extent, are complementary to each other. Then, we construct a synthetic indicator of the depth of their use. The resulting intra-firm index is built to reflect not only the number of practices adopted but also the depth of their individual use and the extent of their complementarity. The empirical testing of the decision model is carried out using the evidence from the adoption behaviour of a sample of 1,238 UK establishments present in the 2004 Workplace Employment Relations Survey (WERS). Our empirical results show that the intra-firm profitability based model is a good model in that it can explain more of the variability of joint adoption than models based upon the variability of adoption and use of individual practices. We also investigate whether a number of firm specific and market characteristics by affecting the size of the gains (which the joint adoption of innovations can generate) may drive the intensity of use of the four innovations. We find that establishment size, whether foreign owned, whether exposed to an international market and the degree of homogeneity of the final product are important determinants of the intensity of the joint adoption of the four innovations. Most importantly, our results point out that the factors that the economics of innovation literature has been showing to affect the intensity of use of a technological innovation do also affect the intensity of use of sets of innovative management practices. However, they can explain only a small part of the diversity of their joint adoption use by the firms in the sample.

Grating and plaid masks indicate linear summation in a contrast gain pool

In human vision, the response to luminance contrast at each small region in the image is controlled by a more global process where suppressive signals are pooled over spatial frequency and orientation bands. But what rules govern summation among stimulus components within the suppressive pool? We addressed this question by extending a pedestal plus pattern mask paradigm to use a stimulus with up to three mask components: a vertical 1 c/deg pedestal, plus pattern masks made from either a grating (orientation = -45°) or a plaid (orientation = ±45°), with component spatial frequency of 3 c/deg. The overall contrast of both types of pattern mask was fixed at 20% (i.e., plaid component contrasts were 10%). We found that both of these masks transformed conventional dipper functions (threshold vs. pedestal contrast with no pattern mask) in exactly the same way: The dipper region was raised and shifted to the right, but the dipper handles superimposed. This equivalence of the two pattern masks indicates that contrast summation between the plaid components was perfectly linear prior to the masking stage. Furthermore, the pattern masks did not drive the detecting mechanism above its detection threshold because they did not abolish facilitation by the pedestal (Foley, 1994). Therefore, the pattern masking could not be attributed to within-channel masking, suggesting that linear summation of contrast signals takes place within a suppressive contrast gain pool. We present a quantitative model of the effects and discuss the implications for neurophysiological models of the process. © 2004 ARVO.

Adaptation and gain pool summation:Alternative models and masking data

Foley [J. Opt. Soc. Am. A 11 (1994) 1710] has proposed an influential psychophysical model of masking in which mask components in a contrast gain pool are raised to an exponent before summation and divisive inhibition. We tested this summation rule in experiments in which contrast detection thresholds were measured for a vertical 1 c/deg (or 2 c/deg) sine-wave component in the presence of a 3 c/deg (or 6 c/deg) mask that had either a single component oriented at -45° or a pair of components oriented at ±45°. Contrary to the predictions of Foley's model 3, we found that for masks of moderate contrast and above, threshold elevation was predicted by linear summation of the mask components in the inhibitory stage of the contrast gain pool. We built this feature into two new models, referred to as the early adaptation model and the hybrid model. In the early adaptation model, contrast adaptation controls a threshold-like nonlinearity on the output of otherwise linear pathways that provide the excitatory and inhibitory inputs to a gain control stage. The hybrid model involves nonlinear and nonadaptable routes to excitatory and inhibitory stages as well as an adaptable linear route. With only six free parameters, both models provide excellent fits to the masking and adaptation data of Foley and Chen [Vision Res. 37 (1997) 2779] but unlike Foley and Chen's model, are able to do so with only one adaptation parameter. However, only the hybrid model is able to capture the features of Foley's (1994) pedestal plus orthogonal fixed mask data. We conclude that (1) linear summation of inhibitory components is a feature of contrast masking, and (2) that the main aftereffect of spatial adaptation on contrast increment thresholds can be assigned to a single site. © 2002 Elsevier Science Ltd. All rights reserved.

Tail-free operation of an overdriven gain-switched DFB laser by spectral filtering

The tail-free operation of an overdriven gain-switched distributed feedback (DFB) laser by spectral filtering was demonstrated. The filtering was realized using a mechanically tunable fiber Bragg grating (FBG). The unfiltered and filtered signals were traced by corresponding oscilloscope. The spectral filtering removed the nonlinearly chirped components resulting in the pulse shortening. The results showed unwanted relaxation in the overdriven DFB laser were supressed by using a steep-edge notch filter.

Spectrally-controlled, gain-switched operation of InGaN diode laser

Self-seeded, gain-switched operation of an InGaN multi-quantum-well diode laser is reported for the first time. Narrow-line, wavelength-tunable, picosecond pulses have been generated from a standard, uncoated diode laser with an external feedback.

Gain switching of an external cavity grating-coupled surface emitting laser with wide tunability

The gain-switched, single frequency operation of an external cavity grating-coupled surface emitting laser with a wavelength tuning range of 100 nm was presented. The light in the grating section was coupled out of the laser at a specific angle to the surface of the device. Analysis showed that within the driving current range, lasing in the device only occurred when the external cavity was properly aligned.

Is breast best? Perceptions of infant feeding

This study explored the reasons why young women from low income areas are among those least likely to breastfeed. Focus groups were conducted with 15 health professionals and 11 young, first time mothers were interviewed. Health professionals participating believed that white communities endorsed bottle feeding while Pakistani and Bangladeshi communities, although they accepted breastfeeding more readily, were likely to give prelacteal feeds of non-breast milk and to delay weaning. The interviews with mothers revealed a belief that 'breast is best' but factors intervened in a detrimental way resulting in the decision not to breastfeed or in early cessation. Participating mothers expected breastfeeding to be painful and were preoccupied with feeding and weight gain. The desire to have 'fat bonnie babies' demonstrated the mothers' moral attempts to be perceived as 'good mothers' although their actions went against the knowledge that 'breast is best'. Recommendations include educating health professionals about subcultures in their communities and reversing the misconception that breast milk is insufficient for a baby's healthy development. Promoting breastfeeding must include the crucial message that breast milk contains all the nourishment a baby needs.

Characteristics of Brillouin gain based distributed temperature sensors

A Brillouin-gain based distributed temperature sensor has been investigated experimentally and theoretically. The relation between Brillouin gain, input probe power and sensing length have been studied. The study shows that there is an optimum probe power providing a maximum Brillouin gain signal for a given sensing length.

22-km distributed temperature sensor using Brillouin gain in an optical fiber

We describe an experimental distributed temperature sensor that uses the temperature dependence of the Brillouin frequency shift. When a 22.2-km sensing length is used, we have observed a temperature resolution of 1°C and have obtained a spatial resolution of 10 m.

Multi-wavelength erbium/Raman gain based random distributed feedback fiber laser

A multiwavelength generation in a random distributed feedback fiber laser based on hybrid Raman and erbium gain and a Lyot all-fiber spectral filter is demonstrated for the first time. The use of erbium-doped fiber allows a multi-wavelength generation to be achieved at lower pump powers in comparison with random fiber lasers based on Raman gain only. The operating bandwidth and flatness of power distribution between different lines in generation are also improved in the hybrid gain configuration.

E-government strategy in Turkey:a case for m-government

Market orientation strategies are now expected to be integrated and enacted by firms and governments alike. While private services will surely continue to take the lead in mobile strategy orientation, others such as government and Non-Governmental Organizations (NGOs) are also becoming prominent Mobile Players (m-Players). Enhanced data services through smart phones are raising expectations that governments will finally deliver services that are in line with a consumer ICT lifestyle. To date, it is not certain which form of technological standards will take the lead, e.g. enhanced m-services or traditional Internet-based applications. Yet, with the introduction of interactive applications and fully transactional services via 3G smart phones, the currently untapped segment of the population (without computers) have the potential to gain access to government services at a low cost.