888 resultados para Estruturas organizacionais
Resumo:
The fractal self-similarity property is studied to develop frequency selective surfaces (FSS) with several rejection bands. Particularly, Gosper fractal curves are used to define the shapes of the FSS elements. Due to the difficulty of making the FSS element details, the analysis is developed for elements with up to three fractal levels. The simulation was carried out using Ansoft Designer software. For results validation, several FSS prototypes with fractal elements were fabricated. In the fabrication process, fractals elements were designed using computer aided design (CAD) tools. The prototypes were measured using a network analyzer (N3250A model, Agilent Technologies). Matlab software was used to generate compare measured and simulated results. The use of fractal elements in the FSS structures showed that the use of high fractal levels can reduce the size of the elements, at the same time as decreases the bandwidth. We also investigated the effect produced by cascading FSS structures. The considered cascaded structures are composed of two FSSs separated by a dielectric layer, which distance is varied to determine the effect produced on the bandwidth of the coupled geometry. Particularly, two FSS structures were coupled through dielectric layers of air and fiberglass. For comparison of results, we designed, fabricated and measured several prototypes of FSS on isolated and coupled structures. Agreement was observed between simulated and measured results. It was also observed that the use of cascaded FSS structures increases the FSSs bandwidths and, in particular cases, the number of resonant frequencies, in the considered frequency range. In future works, we will investigate the effects of using different types of fractal elements, in isolated, multilayer and coupled FSS structures for applications on planar filters, high-gain microstrip antennas and microwave absorbers
Resumo:
This paper presents a study of the integration of filters and microstrip antennas, yielding devices named as filtennas for applications in wireless communications systems. The design of these structures is given from the observation of filtennas based integration between horn antennas and frequency selective surfaces (FSS), used in the band X. The choice of microstrip line structures for the development of a new configuration filtennas justifies the wide application of these transmission lines, in recent decades, always resulting in the production of circuit structures with planar light-weight, compact size, low cost, easy to construct and particularly easy to integrate with other microwave circuits. In addition, the antenna structure considered for the composition of filtennas consists of a planar monopole microstrip to microstrip filters integrated in the feed line of the antenna. In particular, are considered elliptical monopole microstrip (operating in UWB UWB) microstrip filters and (in structures with associated sections in series and / or coupled). In addition, the monopole microstrip has a proper bandwidth and omnidirectional radiation pattern, such that its integration with microstrip filters results in decreased bandwidth, but with slight changes in the radiation pattern. The methods used in the analysis of monopoles, and filters were filtennas finite elements and moments by using commercial software Ansoft Designer and HFSS Ansoft, respectively. Specifically, we analyze the main characteristics of filtennas, such as radiation pattern, gain and bandwidth. Were designed, constructed and measures, several structures filtennas, for validation of the simulated results. Were also used computational tools (CAD) in the process of building prototypes of planar monopoles, filters and filtennas. The prototypes were constructed on substrates of glass-fiber (FR4). Measurements were performed at the Laboratory for Telecommunications UFRN. Comparisons were made between simulated and measured, and found good agreement in the cases considered
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES
Resumo:
This work is within the framework of Cognitive Linguistics, which, as opposed to generative modular approach posits that language is not autonomous but part of human cognition manifest mental processing, socio-cultural and bodily experiences. Our goal is to describe and analyze cognitive mechanisms of understanding who work in the formal and meaningful organization of the narrative. In order to study and verification of this phenomenon, this project was based in the theoretical framework of Rapaport et al (1994) with the treatment of deictic center, Zwaan (1999) and Zwaan and Radvansky (1998) with situation models, Minsky (1974) with the concept frame, Johnson (1987) and Duke and Costa (2012) with pictorial schemes. To this end, we focused on the deictic perspective (WHERE, WHEN, WHO), social cognitive structures (frames) and body (pictorial diagrams) and the situation of models built by compreendedor from these cognitive structures. Methodologically, it is a qualitative research (BAUER and GASKELL, 2002), of interpretive base (MOITA LOPES, 1994), based on introspection (Talmy, 2005). The corpus selected is a sample of twelve texts written by 8th grade students, whose production consists of fictional narrative, the production of diary pages. The analyses were conducted by cognitive structures known as constructional blocks (BCs)(SANTOS, 2011), which guid the discussion about how we build understanding and creation of meanings in narratives. The result shows that the narrative events are mentally represented by the understander that conceives a deictic center and that, guided by it, has access to understanding and construction of meaning in narrative by means of cognitive domains established by bodily and socio-cultural experiences.
Resumo:
This work proposes a modified control chart incorporating concepts of time series analysis. Specifically, we considerer Gaussian mixed transition distribution (GMTD) models. The GMTD models are a more general class than the autorregressive (AR) family, in the sense that the autocorrelated processes may present flat stretches, bursts or outliers. In this scenario traditional Shewhart charts are no longer appropriate tools to monitoring such processes. Therefore, Vasilopoulos and Stamboulis (1978) proposed a modified version of those charts, considering proper control limits based on autocorrelated processes. In order to evaluate the efficiency of the proposed technique a comparison with a traditional Shewhart chart (which ignores the autocorrelation structure of the process), a AR(1) Shewhart control chart and a GMTD Shewhart control chart was made. An analytical expression for the process variance, as well as control limits were developed for a particular GMTD model. The ARL was used as a criteria to measure the efficiency of control charts. The comparison was made based on a series generated according to a GMTD model. The results point to the direction that the modified Shewhart GMTD charts have a better performance than the AR(1) Shewhart and the traditional Shewhart.
Resumo:
This work aims to investigate the behavior of fractal and helical elements structures in planar microstrip. In particular, the frequency selective surfaces (FSSs) had changed its conventional elements to fractal and helical formats. The dielectric substrate used was fiberglass (FR-4) and has a thickness of 1.5 mm, a relative permittivity 4.4 and tangent loss equal to 0.02. For FSSs, was adopting the Dürer’s fractal geometry and helical geometry. To make the measurements, we used two antennas horns in direct line of sight, connected by coaxial cable to the vector network analyzer. Some prototypes were select for built and measured. From preliminary results, it was aimed to find practical applications for structures from the cascading between them. For FSSs with Dürer’s fractal elements was observed behavior provided by the multiband fractal geometry, while the bandwidth has become narrow as the level of iteration fractal increased, making it a more selective frequency with a higher quality factor. A parametric analysis allowed the analysis of the variation of the air layer between them. The cascading between fractal elements structure were considered, presented a tri-band behavior for certain values of the layer of air between them, and find applications in the licensed 2.5GHz band (2.3-2.7) and 3.5GHz band (3.3-3.8). For FSSs with helical elements, six structures were considered, namely H0, H1, H2, H3, H4 and H5. The electromagnetic behavior of them was analyzed separately and cascaded. From preliminary results obtained from the separate analysis of structures, including the cascade, the higher the bandwidth, in that the thickness of the air layer increases. In order to find practical applications for helical structures cascaded, the helical elements structure has been cascaded find applications in the X-band (8.0-12.0) and unlicensed band (5.25-5.85). For numerical and experimental characterization of the structures discussed was used, respectively, the commercial software Ansoft Designer and a vector network analyzer, Agilent N5230A model.
Resumo:
Increasingly, the Information Technology (IT) has been used to sustain the business strategies, causing increased its relevance. Therefore IT governance is seen as one of the priorities of organizations at the time. The search for strategic alignment between business and IT is debated as a factor for business success, but even with that importance, usually the main business managers are reluctant to take responsibility for decisions involving IT, mainly due to the complexity of your infrastructure. Since cloud computing is being seen as an element capable of assisting in the implementation of organizational strategies, because their characteristics enable greater efficiency and agility in IT, and is considered as a new computing paradigm. The main objective of the analyze the relationship between IT governance arrangements and strategic alignment with the infrastructure as a service (IaaS) of public cloud computing. Therefore, an exploratory, descriptive and inferential was developed, with approach to the problem of quantitatively research, with descriptive survey method and cross section. An electronic questionnaire that was applied to the ISACA chapters Associates of São Paulo and the Distrito Federal, totaling 164 respondents was used. The instrument used based on the theories of Weill and Ross (2006) for array of IT governance arrangement; Henderson and Venkatraman (1993) and Luftman (2000), for maturity of the strategic alignment model; and NIST (2011 b), ITGI (2007) and CSA (2010) for infrastructure maturity as a service (IaaS) public in its essential characteristics. As regards the main results, this research proved that with public IaaS decision-making structures have changed, with a greater participation of senior executives in all five key IT decisions (IT governance arrangement array) including more technical decisions as architecture and IT infrastructure. With increased participation of senior executives the decrease was also observed in the share of IT specialists, characterizing the decision process with the duopoly archetype (shared decision). With regard to strategic alignment, it was observed that it changes with cloud computing, and organizations with public IaaS, a maturity of strategic alignment with statistically significant and greater difference when compared to organizations without IaaS. The maturity of public IaaS is at the intermediate level (level 3 - "defined process"), with the elasticity and measurement achieved level 4 - "managed and measurable" It was also possible to infer in organizations with public IaaS, there are positive correlations between the key decisions and the maturity of IaaS, especially at the beginning, architecture and infrastructure, and the archetypes involving senior executives and IT specialists. In the correlation between the maturity and mature strategic alignment of public IaaS therefore the higher the strategic alignment, the greater the maturity of the public IaaS and vice versa.
Resumo:
The microstrip antennas in your simplest form consist of a ground plane and a dielectric substrate which supports a conductive tape. As these antennas have some limitations, this work presents a study of anisotropic substrates, as well as some results in microstrip antennas with circular patch, aiming to overcome these limitations, especially in applications at 4G technology. These anisotropic substrates are those in which electrical permittivity and magnetic permeability are represented by tensors of second order. The study consists of a theoretical analysis of substrates and development of a mathematical formalism, the Transverse Transmission Line Method, aimed the application of these substrates in microstrip antennas. Among the substrates used in this study, there are the ferrimagnetic and metamaterials, in which some miniaturizations of the antennas are achieved. For antennas with circular patch, are considered arrays and modified ground planes in order to achieve improvement in parameters, in particular, gain and bandwidth. Several simulations have been made and antennas were constructed so that the measured values could be compared with the simulated values.
Resumo:
O presente estudo aborda a utilização de carvão ativado comercial na remoção de ácidos húmicos em meio aquoso. O objetivo principal é desenvolver e caracterizar materiais carbonáceos visando aplicações de remoção de ácidos húmicos em meio aquoso por processos de adsorção e oxidação. Testes de remoção do poluente foram desenvolvidos com a utilização do carvão comercial, carvão modificado a partir de tratamentos ácidos e compósito confeccionado com a impregnação de ferro no carvão. Espumas de carbono com dispersões de carvão ativado e óxidos de ferro também foram desenvolvidas buscando aplicações de remoção do poluente através de processos eletroquímicos. Os resultados das caracterizações demonstraram ganho de área superficial a partir do tratamento ácido, a presença dispersa de ferro em todo carvão na forma de fase maghemita com a introdução do metal, e ganho de estabilidade eletroquímica na espuma, com a presença de dispersões de carvão ativados impregnados com ferro. O processo oxidativo Fenton, foto assistido por radiação UV, demonstrou maior eficiência para remoção do ácido húmico em água.
Resumo:
Due to properties such as excellent biocompatibility, high resistance to corrosion and low specific weight, titanium has been considered a material of great interest for Dentistry. It has been widely used in implants and orthognathic surgeries. Recently, titanium has been seen as a feasible alternative for the fabrication of removable partial denture frameworks, either in pure titanium (99.75%) or in titanium alloy forms (Ti-6Al-4V; Ti-6A1-7Nb). Based on a review of the literature, this work studied the use of titanium for the fabrication of removable partial denture frameworks, focusing on its advantages and disadvantages as well as its characteristics. It was concluded that the use of titanium is a convenient option for partially edentulous arches rehabilitation with quite satisfactory and promising clinical results. However, the need for highly-equipped laboratories increases the cost, preventing its large scale use.
Resumo:
Due to properties such as excellent biocompatibility, high resistance to corrosion and low specific weight, titanium has been considered a material of great interest for Dentistry. It has been widely used in implants and orthognathic surgeries. Recently, titanium has been seen as a feasible alternative for the fabrication of removable partial denture frameworks, either in pure titanium (99.75%) or in titanium alloy forms (Ti-6Al-4V; Ti-6A1-7Nb). Based on a review of the literature, this work studied the use of titanium for the fabrication of removable partial denture frameworks, focusing on its advantages and disadvantages as well as its characteristics. It was concluded that the use of titanium is a convenient option for partially edentulous arches rehabilitation with quite satisfactory and promising clinical results. However, the need for highly-equipped laboratories increases the cost, preventing its large scale use.
Resumo:
Smart structures and systems have the main purpose to mimic living organisms, which are essentially characterized by an autoregulatory behavior. Therefore, this kind of structure has adaptive characteristics with stimulus-response mechanisms. The term adaptive structure has been used to identify structural systems that are capable of changing their geometry or physical properties with the purpose of performing a specific task. In this work, a sliding mode controller with fuzzy inference is applied for active vibration control in an SMA two-bar truss. In order to obtain a simpler controller, a polynomial model is used in the control law, while a more sophisticated version, which presents close agreement with experimental data, is applied to describe the SMA behavior of the structural elements. This system has a rich dynamic response and can easily reach a chaotic behavior even at moderate loads and frequencies. Therefore, this approach has the advantage of not only obtaining a simpler control law, but also allows its robustness be evidenced. Numerical simulations are carried out in order to demonstrate the control system performance.
Resumo:
Smart structures and systems have the main purpose to mimic living organisms, which are essentially characterized by an autoregulatory behavior. Therefore, this kind of structure has adaptive characteristics with stimulus-response mechanisms. The term adaptive structure has been used to identify structural systems that are capable of changing their geometry or physical properties with the purpose of performing a specific task. In this work, a sliding mode controller with fuzzy inference is applied for active vibration control in an SMA two-bar truss. In order to obtain a simpler controller, a polynomial model is used in the control law, while a more sophisticated version, which presents close agreement with experimental data, is applied to describe the SMA behavior of the structural elements. This system has a rich dynamic response and can easily reach a chaotic behavior even at moderate loads and frequencies. Therefore, this approach has the advantage of not only obtaining a simpler control law, but also allows its robustness be evidenced. Numerical simulations are carried out in order to demonstrate the control system performance.
Resumo:
Em um cenário de mercado com alta competitividade e saturação, marcas e seus valores podem ter um papel decisivo na diferenciação e decisão de compra por parte dos consumidores. As marcas devem entender a necessidade da responsabilidade social e se preocuparem com questões sociais e ambientais, caso contrário, podem ser vistas com negatividade, isto é, como corporações que só desejam lucrar. Para compreender o espaço das marcas organizacionais na sociedade contemporânea, esta pesquisa apresenta um resgate de evoluções históricas, sobretudo nas últimas décadas, para mostrar os consideráveis progressos no modo de pensar em relação aos valores das marcas, ao relacionamento com públicos interessados e à sociedade em geral. É a partir destas análises que se apresenta a importância do investimento em causas sociais não como obrigação ou autopromoção, mas como abordagem que deve se tornar premissa básica e parte da cultura das organizações. O recorte desta pesquisa volta-se ao estudo de causas sociais menos difundidas ou de menor reper- cussão midiática, procurando verificar se o investimento nessas causas podem se refletir em valores para marcas, assim como se espera do apoio a causas mais conhe- cidas, como por exemplo, o câncer, a pobreza ou a fome. O estudo se complementa a partir de entrevistas em profundidade com executivos do Grupo Abril e da Volkswagen do Brasil para avaliar como estas organizações se posicionam frente à possibilidade de investir em causas menos conhecidas, como o daltonismo
Resumo:
O crescimento da fatia da população com idade superior a 65 anos tem levado a uma maior atenção sobre as consequências sociais, económicas, políticas, principalmente nos países desenvolvidos. O estudo que se apresenta é uma abordagem predominantemente qualitativa e tem características descritivas. Pretendemos conhecer de que forma as estruturas residenciais para idosos promovem o desenvolvimento cognitivo em idosos com a doença de Alzheimer através de atividades de estimulação cognitiva. Foram realizadas entrevistas em profundidade aos técnicos responsáveis por quatro estruturas residenciais de idosos (ERPI), da zona centro de Portugal e os dados recolhidos foram triangulados com a análise documental e a observação naturalista realizada pela investigadora, dado que desenvolve a sua atividade profissional neste contexto Os resultados revelam que as estruturas residenciais para idosos estão sensíveis à importância de criar momentos de estimulação cognitivas para idosos com a doença de Alzheimer. Esta tarefa está dificultada não só pela lacuna na formação específica dos técnicos, como também pelo aumento de utentes com estas e outras necessidades, condicionando a ação individualizada destes técnicos. As estruturas residenciais para idosos, consideram que é necessário fazer uma adaptação do processo de institucionalização quando se trata de um utente com esta demência. Existe também uma grande preocupação em manter a capacidade motora, estimulação cognitiva, mantendo assim por mais tempo as capacidades de cada idoso por forma a ter uma melhor qualidade de vida e autonomia.