Constituintes químicos do caule de Spathelia excelsa (rutaceae) e atividade frente a Aedes aegypti

Phytochemical investigation from the stems of Spathelia excelsa (Rutaceae) collected in Amazonas yielded deacetylspathelin (1), 7,8-dimethoxyflindersine (2), new glabretal-type triterpenoid 3β-angeloyl-21,24-epoxy-7α, 21α, 23α, 25-tetrahydroxy-4α, 4β, 8β, 10β-tetramethyl-25-dimethyl-14, 18-cyclo-5α, 13α, 14α, 17α-cholestane (3), in addition to the known steroids β-sitosterol and stigmasterol. Their structures were established on the basis of spectral data. The compounds 1 and 3 were assayed on Aedes aegypti (larvicidal and adulticidal activities and compound 3 exhibited larvicidal properties with LC50 of 4,8 µg/mL.

Nanocompósitos semicondutores ZnO/TiO2: testes fotocatalíticos

Titanium dioxide is an efficient photocatalist, being possible to improve its efficiency with better charge separation which occurs when it is coupled with other semiconductors. Nanometric particles of ZnO were used to impregnate TiO2 P25 in order to optimize its photocatalytic properties. ZnO/TiO2 composites were obtained at different proportions and were characterized by X-ray diffraction (XRD), micro-Raman and diffuse reflectance spectroscopies, measurement of surface area (BET) and scanning electron microscopy (SEM). Raman spectroscopy data revealed a change on the TiO2 surface due the presence of ZnO which was observed by an enlargement of TiO2 peaks and a change on the relation rate between anatase and rutile phases of the composites. The photodegradation of azo-dye Drimaren red revealed better efficiency for ZnO/TiO2 3% nanocomposite and for ZnO pure.

Nanocompósitos de poliuretana termoplástica e nanotubos de carbono de paredes múltiplas para dissipação eletrostática

Polyurethane/multi-walled carbon nanotube (MWCNT) nanocomposites have been prepared with nanotube concentrations between 0.01 wt% and 1 wt%. MWCNT as-synthesized samples with ~74 nm diameter and ~7 μm length were introduced by solution processing in the polyurethane matrix. Scanning electron microscopy (SEM) images demonstrated good dispersion and adhesion of the CNTs to the polymeric matrix. The C=O stretching band showed evidence of perturbation of the hydrogen interaction between urethanic moieties in the nanocomposites as compared to pure TPU. Differential scanning calorimetry and positron anihilation lifetime spectroscopy measurements allowed the detection of glass transition displacement with carbon nanotube addition. Furthermore, the electrical conductivity of the nanocomposites was significantly increased with the addition of CNT.

Modification of a Brazilian smectite clay with different quaternary ammonium salts

In this work, a smectite clay from the State of Paraiba, Brazil, was treated with six different types of ammonium salts, which is an usual method to enhance the affinity between the clay and polymer for the preparation of nanocomposites. The clays, before and after modification, were characterized by X ray diffraction. The conformation of the salts within the platelets of the clay depended on the number of long alkyl chains of the salt. The thermal stability of the clays was also studied. The ammonium salts thermal decomposition was explained in light of their position within the organoclays.

pH effect on the synthesis of magnetite nanoparticles by the chemical reduction-precipitation method

This work aimed at putting in evidence the influence of the pH on the chemical nature and properties of the synthesized magnetic nanocomposites. Saturation magnetization measurements evidenced a marked difference of the magnetic behavior of samples, depending on the final pH of the solution after reaction. Magnetite and maghemite in different proportions were the main magnetic iron oxides actually identified. Synthesis with final pH between 9.7-10.6 produced nearly pure magnetite with little or no other associated iron oxide. Under other synthetic conditions, goethite also appears in proportions that depended upon the pH of the synthesis medium.

Desenvolvimento, caracterização e aplicação eletroanalítica de um compósito fluido de adesivo epóxi, grafite e ciclo-hexanona

A fluid conducting composite material prepared from graphite powder, commercial epoxy resin Araldite®, and cyclohexanone has been developed. The composition was optimized considering the mechanical properties as conductivity and adhesiveness using response surface methodology. This work employed cyclic voltammetry and amperometry to investigate the characteristics of such composite electrodes without and with the insertion of Prussian blue in the electrode body (bulk modified electrode). The composite electrodes were also successfully used for the amperometric detection of hydrogen peroxide at 0.0V vs Ag/AgCl.

Avaliação das propriedades de compósitos de polipropileno reforçados com casca de aveia

The preparation of oat-reinforced polypropylene nanocomposites with different fiber contents by means of melt-processing was investigated. Composite properties were evaluated by Scanning Electron Microscopy (SEM), Flexural Modulus, Dynamic Mechanical Analysis (DMA), Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). Findings confirmed that the oat composite properties were affected by fiber type and content. Improvements in mechanical properties were obtained using fiber contents < 20% w.t.

Novas N-benzoiltiraminas de Swinglea glutinosa (Rutaceae)

Phytochemical studies of the leaves and fruits have led to the identification of the known amides (E)-N-methyl-cinnamamide, N-benzoyltyramine, N-benzoyl-O-geranyltyramine, N-benzoyl-O-(4-acetoxyl)-geranyltyramine, in addition to the new N-{2-[4-(butoxyl-3-one)phenyl]ethyl}benzamide, N-{2-[4-(2,3-dihydroxy-2-methyl-butoxylanal)phenyl]ethyl}benzamide, N-{2-[4-(2,3-dihydroxy-2-methyl-butoxyloic)phenyl]ethyl}benzamide, N-benzoyl-O-(4-acetoxyl-6,7-epoxy)-geranyltyramine, N-benzoyl-O-(4-acetoxyl-6,7-dihydroxy)-geranyltyramine and N-benzoyl-O-(6-acetoxyl-4,7-dihydroxy)-geranyltyramine. The isolated compounds clearly point to Swinglea phytochemical affinities with other Aurantioideae species.

Estudo em raiz e ráquis foliar de spathelia excelsa: fitoquímica e atividade frente ao fungo Moniliophthora perniciosa associado ao cupuaçuzeiro (Theobroma grandiflorum)

The chemical composition of Spathelia excelsa (Krause) R. S. Cowan & Brizicky was investigated and the limonoids harrisonin (1) and deacetylspathelin (2), alkaloids folinin and casimiroin mixture (3a, b), plus a further casimiroin (3b) were identified in methanol extract from root. The CH2Cl2 extract from the rachis yielded protolimonoid 3β-angeloyl-21,24-epoxy-7α,21α,23α,25-tetrahydroxy-4α,4β,8β,10β-tetramethyl-25-dimethyl-14,18-cyclo-5α,13α,14α,17α-cholestane (4), and methanol extract, the limonoids limonin diosphenol (5) and perforatin (6), as well as the chromone biflorin (7). Harrisonin and biflorin were isolated for the first time in this genus. On the antifungal assay against witches' broom (Moniliophthoraperniciosa) compound 3b was found to be active.

Sesquiterpenos de Ocotea lancifolia (Lauraceae)

Six new eremophilane sesquiterpenes, (rel)-4β,5β,7β-eremophil-9-en-12-oic acid (1), (rel)-4β,5β,7β-eremophil-1(10)-en-12-oic acid (2), (rel)-4β,5β,7β-eremophil-1(10)-en-2-oxo-12-oic acid (3), (rel)-4β,5β,7β-eremophil-9-en-12,8α-olide (4), (rel)-4β,5β,7β-eremophil-9-en-12,8β-olide (5) and (rel)-4β,5β,7β-eremophil-9α,10α-epoxy-12-oic acid (6), were isolated from the leaves of a specimen of Ocotea lancifolia (Lauraceae). Two other known sesquiterpenes, 4β,5β,7β-eremophil-11-en- 10α-ol (7) reported for the first time in the genus Ocotea, and the aromadendrene sesquiterpene, spathulenol (8), were also isolated. Their structures were determined on the basis of spectral data (MS, IR, UV and NMR-1D and 2D) and subsequent comparisons with the literature.

Síntese e caracterização de nanocompósitos de poliestireno/hidroxissal lamelar

Polystyrene/layered hydroxide salt (LHS) modified with sodium dodecyl sulfate was synthesized by in situ polymerization. The materials synthesized were characterized by gravimetry, X-ray diffraction (XRD), thermogravimetry analyses (TGA), differential scanning calorimetry (DSC) and the flammability test (FT). XRD demonstrated that synthesized nanocomposites in all compositions studied showed poor global dispersion of LHS in polystyrene. TGA showed a slight decrease in thermal stability. DSC curves showed that the glass transition temperature of polystyrene and nanocomposites were similar. The FT showed that the nanocomposite with low load of LHS exhibited good results.

Efeito da adição de TIO2 nas propriedades térmicas e na cristalinidade do copolímero de etileno/acetato de vinila

We investigated the effect of adding titanium dioxide nanoparticles (TiO2) to ethylene vinyl acetate (EVA) copolymer, containing 28% vinyl acetate groups, on the crystallinity and miscibility of the copolymer. Films of EVA/TiO2 containing 0.25%-1% TiO2, relative to the total weight of EVA, were prepared from their solution. The obtained films were characterized by X-ray diffraction, low-field nuclear magnetic resonance, and differential scanning calorimetry. The addition of TiO2 to the EVA copolymer was proved to cause changes in the crystallinity and mobility of the polymer chains of EVA, due to new intermolecular interactions and nanostructure organization.

Eletrodo compósito à base de grafite-Araldite®: aplicações didáticas - parte II

This work proposes the use of a graphite-Araldite® 70% (graphite, m/m) composite electrode in didactic experiments, specifically in the quantitative determination of the neurotransmitter dopamine (DA) in a sample of pharmaceutical formulation. The goal is to demonstrate the possibility of using voltammetric techniques in quality control of medicines, besides covering some concepts such as the influence of pH on the redox process, the differential pulse voltammetry (DPV) technique, the optimization of experiments and comparison with an official method described in the United States Pharmacopoeia.

Sesquiterpenos e outros constituintes das folhas de Pterodon pubescens Benth (Leguminosae)

In addition to β-sitosterol, stigmasterol, phaeophitin A, luteolin, kaempferol, quercetin, (+)-catechin, quercetin-3-O-α-L-rhamnopyranoside, rutin, and p-hydroxy-benzoic acid, six known sesquiterpenes, namely (rel)-2β,6β-epoxy-5β-hydroxy-isodaucane, oplopanone, 1β,6α-dihydroxy-4(15)-eudesmene, caryophyllene oxide, α-cadinol, and spathulenol, were isolated from the leaves of Pterodon pubescens (Leguminosae) growing in the Cerrado of Mato Grosso do Sul, Brazil. The (rel)-2β,6β-epoxy-5β-hydroxy-isodaucane corresponds to the correct structure of homalomenol D. The sesquiterpene oplopanone, which bears a modified cadinane skeleton, is being reported for the first time in this genus. The structures of the compounds were determined on the basis of spectral data (MS, IR, and NMR-1D and 2D) and subsequent comparison with data reported in the literature.

Starch/poly (butylene adipate-co-terephthalate)/montmorillonite films produced by blow extrusion

This study aims to prepare biodegradable films from cassava starch, poly (butylene adipate-co-terephthalate) (PBAT), and montmorillonite (MMT) using blow-extrusion process and analyze the effects of different types and concentrations of MMT on the microstructure, physicochemical, and mechanical properties of the resulting films. The films were produced by blending 30% of PBAT with glycerol (17.5%), starch (49.0-52.5%), and four different types of montmorillonite (Cloisite® Na+, 10A, 15A, and 30B) at two different concentrations (1.75% and 3.5%). All the films prepared in this study showed an increase in the basal spacing of MMT layers. In particular, the films with 10A and 30B showed the highest increase in intercalation basal spacing, suggesting the formation of intercalated composites. The addition of nanoclays decreased the elongation of films. The addition of Cloisite® 10A resulted in films with the lowest WVP values and the highest stability to water adsorption under different RH conditions.