Trial of the Jews of Trent manuscript

Handwritten pagination includes 508, 508a, 508b and then later skips from page 574 to page 577.

Reducing the incidence of under-skin browning in 'Honey Gold' mango (Mangifera indica L.) fruit

'Honey Gold' mango is a relatively new cultivar in Australia, with an appealing skin colour and a sweet fibre-free flesh. However, fruit can develop 'under-skin browning' (USB), which appears several days after packing as a distinct 'bruise'-like discolouration under the epidermis and can affect large areas of the fruit surface. We investigated the anatomy of USB and the impact of post-harvest fruit handling conditions on the disorder. Starch accumulated around the resin canals and discoloured cells in the affected area, with no visible change to the cuticle or epidermis. Delays of 1 d at ambient temperature (27 degrees - 35 degrees C) before packing, and 2 d at 18 degrees - 20 degrees C (after packing), before placing fruit at 12 degrees - 14 degrees C and road transportation, reduced the incidence of USB by 83% compared to placing fruit at 12 degrees - 14 degrees C within 13 h of picking. The incidence of USB was 88 100% higher in fruit that were cooled to 12 degrees - 14 degrees C within 13 h of picking, then commercially road-freighted for 4 d at 12 degrees - 14 degrees C, than in fruit held under similar temperature conditions, but not road-freighted. Wrapping each fruit in bubble-wrap to minimise direct contact with other fruit, with the plastic insert, or with the cardboard tray, reduced the incidence of USB by 84% after road-freight compared to not using bubble-wrap. These results suggest that USB is a unique disorder of mango skin associated with a rapid post-harvest reduction in temperature, from high ambient temperatures to 12 degrees - 14 degrees C, and with physical damage during road-freight.

Nutrition and Nutritional Care of Elderly People in Finnish Nursing Homes and Hospitals

Background: Malnutrition is a common problem for residents of nursing homes and long-term care hospitals. It has a negative influence on elderly residents and patients health and quality of life. Nutritional care seems to have a positive effect on elderly individuals nutritional status and well-being. Studies of Finnish elderly people s nutrition and nutritional care in institutions are scarce. Objectives: The primary aim was to investigate the nutritional status and its associated factors of elderly nursing home residents and long-term care patients in Finland. In particular, to find out, if the nursing or nutritional care factors are associated with the nutritional status, and how do carers and nurses recognize malnutrition. A further aim was to assess the energy and nutrient intake of the residents of dementia wards. A final objective was to find out, if the nutrition training of professionals leads to changes in their knowledge and further translate into better nutrition for the aged residents of dementia wards. Subjects and methods: The residents (n=2114) and patients (n=1043) nutritional status was assessed in all studies using the Mini Nutritional Assessment test (MNA). Information was gathered in a questionnaire on residents and patients daily routines providing nutritional care. Residents energy and nutrient intake (n=23; n=21) in dementia wards were determined over three days by the precise weighing method. Constructive learning theory was the basis for educating the professionals (n=28). A half-structured questionnaire was used to assess professionals learning. Studies I-IV were cross-sectional studies whereas study V was an intervention study. Results: Malnutrition was common among elderly residents and patients living in nursing homes and hospitals in Finland. According to the MNA, 11% to 57% of the studied elderly people suffered from malnutrition, and 40-89% were at risk of malnutrition, whereas only 0-16% had a good nutritional status. Resident- and patient-related factors such as dementia, impaired ADL (Activities of Daily Living), swallowing difficulties and constipation mainly explained the malnutrition, but also some nutritional care related factors, such as eating less than half of the offered food portion and not receiving snacks were also related to malnutrition. The intake of energy and some nutrients by the residents of dementia wards were lower than those recommended, although the offered food contained enough energy and nutrients. The proportion of residents receiving vitamin D supplementation was low, although there is a recommendation and known benefits for the adequate intake of vitamin D. Nurses recognized malnutrition poorly, only one in four (26.7%) of the actual cases. Keeping and analysing food diaries and reflecting on nutritional issues in small group discussions were effective training methods for professionals. The nutrition education of professionals had a positive impact on the energy and protein intake, BMIs, and the MNA scores of some residents in dementia wards. Conclusions: Malnutrition was common among elderly residents and patients living in nursing homes and hospitals in Finland. Although residents- and patient related factors mainly explained malnutrition, nurses recognized malnutrition poorly and nutritional care possibilities were in minor use. Professionals nutrition education had a positive impact on the nutrition of elderly residents. Further studies describing successful nutritional care and nutrition education of professionals are needed.

The white-rot fungi Phlebia radiata and Dichomitus squalens in wood-based cultures: expression of laccases, lignin peroxidases, and oxalate decarboxylase

Basidiomycetous white-rot fungi are the only organisms that can efficiently decompose all the components of wood. Moreover, white-rot fungi possess the ability to mineralize recalcitrant lignin polymer with their extracellular, oxidative lignin-modifying enzymes (LMEs), i.e. laccase, lignin peroxidase (LiP), manganese peroxidase (MnP), and versatile peroxidase (VP). Within one white-rot fungal species LMEs are typically present as several isozymes encoded by multiple genes. This study focused on two effi cient lignin-degrading white-rot fungal species, Phlebia radiata and Dichomitus squalens. Molecular level knowledge of the LMEs of the Finnish isolate P. radiata FBCC43 (79, ATCC 64658) was complemented with cloning and characterization of a new laccase (Pr-lac2), two new LiP-encoding genes (Pr-lip1, Pr-lip4), and Pr-lip3 gene that has been previously described only at cDNAlevel. Also, two laccase-encoding genes (Ds-lac3, Ds-lac4) of D. squalens were cloned and characterized for the first time. Phylogenetic analysis revealed close evolutionary relationships between the P. radiata LiP isozymes. Distinct protein phylogeny for both P. radiata and D. squalens laccases suggested different physiological functions for the corresponding enzymes. Supplementation of P. radiata liquid culture medium with excess Cu2+ notably increased laccase activity and good fungal growth was achieved in complex medium rich with organic nitrogen. Wood is the natural substrate of lignin-degrading white-rot fungi, supporting production of enzymes and metabolites needed for fungal growth and the breakdown of lignocellulose. In this work, emphasis was on solid-state wood or wood-containing cultures that mimic the natural growth conditions of white-rot fungi. Transcript analyses showed that wood promoted expression of all the presently known LME-encoding genes of P. radiata and laccase-encoding genes of D. squalens. Expression of the studied individual LME-encoding genes of P. radiata and D. squalens was unequal in transcript quantities and apparently time-dependent, thus suggesting the importance of several distinct LMEs within one fungal species. In addition to LMEs, white-rot fungi secrete other compounds that are important in decomposition of wood and lignin. One of these compounds is oxalic acid, which is a common metabolite of wood-rotting fungi. Fungi produce also oxalic-acid degrading enzymes of which the most widespread is oxalate decarboxylase (ODC). However, the role of ODC in fungi is still ambiguous with propositions from regulation of intra and extracellular oxalic acid levels to a function in primary growth and concomitant production of ATP. In this study, intracellular ODC activity was detected in four white-rot fungal species, and D. squalens showed the highest ODC activity upon exposure to oxalic acid. Oxalic acid was the most common organic acid secreted by the ODC-positive white-rot fungi and the only organic acid detected in wood cultures. The ODC-encoding gene Ds-odc was cloned from two strains of D. squalens showing the first characterization of an odc-gene from a white-rot polypore species. Biochemical properties of the D. squalens ODC resembled those described for other basidiomycete ODCs. However, the translated amino acid sequence of Ds-odc has a novel N-terminal primary structure with a repetitive Ala-Ser-rich region of ca 60 amino acid residues in length. Expression of the Ds-odc transcripts suggested a constitutive metabolic role for the corresponding ODC enzyme. According to the results, it is proposed that ODC may have an essential implication for the growth and basic metabolism of wood-decaying fungi.

Defining Adequate Vitamin D Intake : Cross-sectional and Intervention Studies

D-vitamiini ylläpitää normaalia luun kasvua ja uudistumista koko elämän ajan. Suomessa, kuten monissa muissakin länsimaissa, väestön D-vitamiinitilanne on riittämätön – talvisin osalla jopa puutteellinen. Tässä väitöskirjassa on tutkittu, lisääkö D-vitamiini luumassan kertymistä kasvuiässä, ja ylläpitäkö D-vitamiini luuston tasapainoista aineenvaihduntaa aikuisiällä. Nämä vaikutukset saattavat ehkäisi osteoporoosin kehittymistä eri ikäkausina. Väitöskirjatyössä tutkittiin erisuuruisten D-vitamiinilisäysten vaikutuksia kolmessa eri ikäryhmässä, jotka olivat 11-12 -vuotiaat tytöt (N=228), 21-49 -vuotiaat miehet (N=54) ja 65-85 -vuotiaat naiset (N=52). Tutkittavat satunnaistettiin ryhmiin, jotka nauttivat joko lumevalmistetta tai 5-20 µg D3-vitamiinia vitamiinilisänä. Tutkimukset olivat kaksoissokkoutettuja. Tutkimuksen aikana tutkittavilta otettiin paastoveri- ja virtsanäytteitä. Lisäksi he täyttivät tutkimuslomakkeen taustatietojen kartoittamiseksi sekä frekvenssikyselylomakkeen kalsiumin ja D-vitamiinin saannin selvittämiseksi. Tyttöjen luunmineraalitiheys (BMD) mitattiin DXA–laitteella ja miesten volumetrinen luuntiheys pQCT-menetelmällä. Näytteistä määritettiin mm. seerumin 25-hydroksi-D-vitamiinin (=S-25-OHD), lisäkilpirauhashormonin (=S-PTH) ja luun aineenvaihduntaa kuvaavien merkkiaineiden pitoisuuksia. Murrosikäisten tyttöjen poikkileikkaustutkimuksessa S-25-OHD- ja luun muodostusmerkkiaineen pitoisuudet vaihtelivat kuukausien välillä; suurimmat pitoisuudet mitattiin syyskuussa ja pienimmät maaliskuussa, mikä kuvastaa vuodenaikaisvaihtelua. Vastaava vaihtelu havaittiin lannerangan ja reisiluun BMD:ssä. D-vitamiinilisäyksellä oli myönteinen vaikutus tyttöjen luumassan lisääntymiseen. Suurin D-vitamiinilisä (10 µg/vrk) lisäsi luumassaa 17.2% enemmän reisiluussa ja 12.5% enemmän lannerangassa verrattuna lumevalmistetta nauttivien tyttöjen vastaaviin tuloksiin, mutta tulos riippui hoitomyöntyvyydestä. D-vitamiinin vaikutus luustoon välittyi vähentyneen luun hajotuksen kautta. Tutkimustuloksiin perustuen riittävä D-vitamiinin saanti murrosikäisille tytöille on 15 µg/vrk. D-vitamiinilisän vaikutus 65-85 -vuotiaiden naisten S-25-OHD-pitoisuuteen vakioitui kuudessa viikossa annoksen ollessa 5-20 µg/vrk. Näillä D-vitamiiniannoksilla ei saavutettu tavoiteltavaa S-25-OHD-pitoisuutta, joka on 80 nmol/l. Arvioimme, että 60 nmol/l -pitoisuuden, jota esiintyy kesäisin tämän ikäryhmän suomalaisilla, tämän ikäryhmän naiset saavuttaisivat 24 µg:n päivittäisellä D-vitamiinin saannilla. Terveillä miehillä havaittiin vuodenaikaisvaihtelu S-25-OHD- ja S-PTH-pitoisuudessa sekä luun hajotusta kuvaavassa merkkiainepitoisuudessa. Toisaalta vaihtelua ei havaittu radiuksen volumetrisessä luuntiheydessä eikä luun muodostusmerkkiaineen pitoisuudessa. Vuodenaikaisvaihtelu estettiin 17 µg:n päivittäisellä D-vitamiinin saannilla, mutta tämän ei havaittu vaikuttavan radiuksen luuntiheyteen kuusi kuukautta kestävän tutkimuksen aikana. Yhteenvetona todetaan, että D-vitamiinin saanti on edelleenkin riittämätöntä tutkimusten kohderyhmillä. Tämä näkyy S-25-OHD- ja PTH-pitoisuuden sekä luunaineenvaihduntaa kuvaavien merkkiaineiden vuodenaikaisvaihteluna, mikä on haitallista luuston hyvinvoinnille. D-vitamiinin saantia tulisi lisätä, jotta vähintäänkin riittävä D-vitamiinitilanne (S-25-OHD>50 nmol/l) tai mahdollisesti jopa tavoiteltava D-vitaminitilanne (S-25-OHD≥80 nmol/l) saavutettaisiin. Jotta D-vitamiinin saannin lisääminen olisi kaikissa ikäryhmissä mahdollista, on suunniteltava nykyistä enemmän D-vitamiinilla täydennettyjä elintarvikkeita.

Preparation, structural analysis and prebiotic potential of arabinoxylo-oligosaccharides

Arabinoxylo-oligosaccharides (AXOS) can be prepared enzymatically from arabinoxylans (AX) and AXOS are known to possess prebiotic potential. Here the structural features of 10 cereal AX were examined. AX were hydrolysed by Shearzyme® to prepare AXOS, and their structures were fully analysed. The prebiotic potential of the purified AXOS was studied in the fermentation experiments with bifidobacteria and faecal microbiota. In AX extracted from flours and bran, high amounts of a-L-Araf units are attached to the b-D-Xylp main chain, whereas moderate or low degree of substitution was found from husks, cob and straw. Nuclear magnetic resonance (NMR) spectroscopy showed that flour and bran AX contain high amounts of a-L-Araf units bound to the O-3 of b-D-Xylp residues and doubly substituted b-D-Xylp units with a-L-Araf substituents at O-2 and O-3. Barley husk and corn cob AX contain high amounts of b-D-Xylp(1→2)-a-L-Araf(1→3) side chains, which can also be found in AX from oat spelts and rice husks, and in lesser amounts in wheat straw AX. Rye and wheat flour AX and oat spelt AX were hydrolysed by Shearzyme® (with Aspergillus aculeatus GH10 endo-1,4-b-D-xylanase as the main enzyme) for the production of AXOS on a milligram scale. The AXOS were purified and their structures fully analysed, using mass spectrometry (MS) and 1D and 2D NMR spectroscopy. Monosubstituted xylobiose and xylotriose with a-L-Araf attached to the O-3 or O-2 of the nonreducing end b-D-Xylp unit and disubstituted AXOS with two a-L-Araf units at the nonreducing end b-D-Xylp unit of xylobiose or xylotriose were produced. Xylobiose with b-D-Xylp(1→2)-a-L-Araf(1→3) side chain was also purified. These AXOS were used as standards in further identification and quantification of corresponding AXOS from the hydrolysates in high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD) analysis. The prebiotic potential of AXOS was tested in in vitro fermentation experiments. Bifidobacterium adolescentis ATCC 15703 and B. longum ATCC 15707 utilized AXOS from the AX hydrolysates. Both species released L-arabinose from AXOS, but B. adolescentis consumed the XOS formed, whereas B. longum fermented the L-arabinose released. The third species tested, B. breve ATCC 15700, grew poorly on these substrates. When cultivated on pure AXOS, the bifidobacterial mixture utilized pure singly substituted AXOS almost completely, but no growth was detected with pure doubly substituted AXOS as substrates. However, doubly substituted AXOS were utilized from the mixture of xylose, XOS and AXOS. Faecal microbiota utilized both pure singly and doubly substituted AXOS. Thus, a mixture of singly and doubly substituted AXOS could function as a suitable, slowly fermenting prebiotic substance. This thesis contributes to the structural information on cereal AX and preparation of mono and doubly substituted AXOS from AX. Understanding the utilization strategies is fundamental in evaluating the prebiotic potential of AXOS. Further research is still required before AXOS can be used in applications for human consumption.

Postharvest physiology and volatile production by flowers of Ptilotus nobilis

Ptilotus nobilis (Lindl.) F. Muell. has potential in the floriculture industries as a cut flower crop. Ethylene production and respiration rates, fresh weight changes and volatile scent production from cut inflorescences of P. nobilis cultivars Passion (dark pink flowers) and Purity (white-green flowers) were measured during vase life. Inflorescence weight loss was significant (P<0.001) during vase life with wilting and colour loss being the primary reasons for loss of vase life. Inflorescences ready for the cut market stored and at 22 degrees C had vase lives of >12 d. Ethylene production by inflorescences was low to negligible. Treatment with silverthiosulphate (STS) and ethylene had no effects on vase life. Evidently, ethylene did not play a role in determining the postharvest longevity of cut P. nobilis flowers. Respiration rates of inflorescences were high at harvest (>700 mg CO2 kg(-1) FW h(-1)) and declined gradually there-after during vase life. Total volatile emissions followed a similar pattern. For Passion, respiration rates of immature florets were significantly greater (P=0.02) than florets from other developmental stages while the calyx produced the most CO2. For Purity, respiration rates of florets of different maturities did not differ and the reproductive tissue produced the most CO2. Only fully opened mature florets with their stigma and anthers revealed, emitted significant quantities of volatiles (P<0.001) and primarily from the calyx tissue for both cultivars. The individual volatiles differed somewhat for the two cultivars. However, both produced significant quantities of benzaldehyde, 3,5-dimethoxytoluene and benzyl alcohol. These. compounds have previously been associated with desirable floral scent. (C) 2013 Elsevier B.V. All rights reserved.

Molecular phylogenetic analysis reveals six new species of Diaporthe from Australia

Six new species of Diaporthe, D. beilharziae on Indigofera australis, D. fraxini-angustifoliae on Fraxinus angustifolia subsp. oxycarpa, D. litchicola on Litchi chinensis, D. nothofagi on Nothofagus cunninghamii, D. pascoei on Persea americana and D. salicicola on Salix purpurea from Australia are described and illustrated based on morphological characteristics and molecular analyses. Three of the new species no longer produced sporulating structures in culture and two of these were morphologically described from voucher specimens. Phylogenetic relationships of the new species with other Diaporthe species are revealed by DNA sequence analyses based on the internal transcribed spacer (ITS) region, and partial regions of the β-tubulin (BT) and translation elongation factor 1-alpha (TEF). © 2013 Mushroom Research Foundation.

Growth of ionization currents in nitrogen

Townsend's primary and secondary ionization coefficients α/p and γ were determined in nitrogen over a wide range of E/p (100-1000 V cm−1 Torr−1) and p (0·4 to 12 Torr at 0 °C) using the pressure variation technique. This technique, along with the Gosseries method of evaluation of ionization coefficients, seems to be more suitable at higher values of E/p, since the errors in these coefficients could be minimized by a suitable selection of p and d, thus eliminating the non-equilibrium ionization condition.

Targeting biotypes of Dactylopius tomentosus to improve effective biocontrol of Cylindropuntia spp. in Australia

Seven Dactylopius tomentosus (Lamarck) biotypes were collected from a range of Cylindropuntia spp. in Mexico, South Africa and United States of America (USA) and imported into quarantine facilities at the Ecosciences Precinct. Host range trials were conducted for each biotype and further assessed against the Cylindropuntia species that are naturalised in Australia to determine the most effective biotype for each species. Host range was confined to the Cylindropuntia for all seven biotypes. In the efficacy trials, C. imbricata (Haw.) F.M.Knuth was killed by the ‘imbricata’ biotype within 16 weeks and C. kleiniae (DC.) F.M.Knuth died within 26 weeks. Cylindropuntia fulgida var. mamillata (DC.) Backeb. and C. imbricata were killed by the ‘fulgida’ biotype within 18 weeks. On-going trials suggest that C. rosea (DC.) Backeb. could be controlled by either the ‘acanthocarpa’ or the ‘acanthocarpa × echinocarpa’ biotypes. Cylindropuntia spinosior (Englem.) F.M.Knuth was not susceptible to any of the D. tomentosus biotypes assessed. A clear designation of which D. tomentosus biotype is most suited for each Cylindropuntia species will improve and increase the effectiveness of biological control of these weed species

Growth of ionization currents in nitrogen

Townsend's primary and secondary ionization coefficients α/p and γ were determined in nitrogen over a wide range of E/p (100-1000 V cm−1 Torr−1) and p (0·4 to 12 Torr at 0 °C) using the pressure variation technique. This technique, along with the Gosseries method of evaluation of ionization coefficients, seems to be more suitable at higher values of E/p, since the errors in these coefficients could be minimized by a suitable selection of p and d, thus eliminating the non-equilibrium ionization condition.

Precipitation-induced runoff and leaching from milled peat mining mires by peat types : a comparative method for estimating the loading of water bodies during peat pruduction

Precipitation-induced runoff and leaching from milled peat mining mires by peat types: a comparative method for estimating the loading of water bodies during peat production. This research project in environmental geology has arisen out of an observed need to be able to predict more accurately the loading of watercourses with detrimental organic substances and nutrients from already existing and planned peat production areas, since the authorities capacity for insisting on such predictions covering the whole duration of peat production in connection with evaluations of environmental impact is at present highly limited. National and international decisions regarding monitoring of the condition of watercourses and their improvement and restoration require more sophisticated evaluation methods in order to be able to forecast watercourse loading and its environmental impacts at the stage of land-use planning and preparations for peat production.The present project thus set out from the premise that it would be possible on the basis of existing mire and peat data properties to construct estimates for the typical loading from production mires over the whole duration of their exploitation. Finland has some 10 million hectares of peatland, accounting for almost a third of its total area. Macroclimatic conditions have varied in the course of the Holocene growth and development of this peatland, and with them the habitats of the peat-forming plants. Temperatures and moisture conditions have played a significant role in determining the dominant species of mire plants growing there at any particular time, the resulting mire types and the accumulation and deposition of plant remains to form the peat. The above climatic, environmental and mire development factors, together with ditching, have contributed, and continue to contribute, to the existence of peat horizons that differ in their physical and chemical properties, leading to differences in material transport between peatlands in a natural state and mires that have been ditched or prepared for forestry and peat production. Watercourse loading from the ditching of mires or their use for peat production can have detrimental effects on river and lake environments and their recreational use, especially where oxygen-consuming organic solids and soluble organic substances and nutrients are concerned. It has not previously been possible, however, to estimate in advance the watercourse loading likely to arise from ditching and peat production on the basis of the characteristics of the peat in a mire, although earlier observations have indicated that watercourse loading from peat production can vary greatly and it has been suggested that differences in peat properties may be of significance in this. Sprinkling is used here in combination with simulations of conditions in a milled peat production area to determine the influence of the physical and chemical properties of milled peats in production mires on surface runoff into the drainage ditches and the concentrations of material in the runoff water. Sprinkling and extraction experiments were carried out on 25 samples of milled Carex (C) and Sphagnum (S) peat of humification grades H 2.5 8.5 with moisture content in the range 23.4 89% on commencement of the first sprinkling, which was followed by a second sprinkling 24 hours later. The water retention capacity of the peat was best, and surface runoff lowest, with Sphagnum and Carex peat samples of humification grades H 2.5 6 in the moisture content class 56 75%. On account of the hydrophobicity of dry peat, runoff increased in a fairly regular manner with drying of the sample from 55% to 24 30%. Runoff from the samples with an original moisture content over 55% increased by 63% in the second round of sprinkling relative to the first, as they had practically reached saturation point on the first occasion, while those with an original moisture content below 55% retained their high runoff in the second round, due to continued hydrophobicity. The well-humified samples (H 6.5 8.5) with a moisture content over 80% showed a low water retention capacity and high runoff in both rounds of sprinkling. Loading of the runoff water with suspended solids, total phosphorus and total nitrogen, and also the chemical oxygen demand (CODMn O2), varied greatly in the sprinkling experiment, depending on the peat type and degree of humification, but concentrations of the same substances in the two sprinklings were closely or moderately closely correlated and these correlations were significant. The concentrations of suspended solids in the runoff water observed in the simulations of a peat production area and the direct surface runoff from it into the drainage ditch system in response to rain (sprinkling intensity 1.27 mm/min) varied c. 60-fold between the degrees of humification in the case of the Carex peats and c. 150-fold for the Sphagnum peats, while chemical oxygen demand varied c. 30-fold and c. 50-fold, respectively, total phosphorus c. 60-fold and c. 66-fold, total nitrogen c. 65-fold and c. 195-fold and ammonium nitrogen c. 90-fold and c. 30-fold. The increases in concentrations in the runoff water were very closely correlated with increases in humification of the peat. The correlations of the concentrations measured in extraction experiments (48 h) with peat type and degree of humification corresponded to those observed in the sprinkler experiments. The resulting figures for the surface runoff from a peat production area into the drainage ditches simulated by means of sprinkling and material concentrations in the runoff water were combined with statistics on the mean extent of daily rainfall (0 67 mm) during the frost-free period of the year (May October) over an observation period of 30 years to yield typical annual loading figures (kg/ha) for suspended solids (SS), chemical oxygen demand of organic matter (CODmn O2), total phosphorus (tot. P) and total nitrogen (tot. N) entering the ditches with respect to milled Carex (C) and Sphagnum (S) peats of humification grades H 2.5 8.5. In order to calculate the loading of drainage ditches from a milled peat production mire with the aid of these annual comparative values (in kg/ha), information is required on the properties of the intended production mire and its peat. Once data are available on the area of the mire, its peat depth, peat types and their degrees of humification, dry matter content, calorific value and corresponding energy content, it is possible to produce mutually comparable estimates for individual mires with respect to the annual loading of the drainage ditch system and the surrounding watercourse for the whole service life of the production area, the duration of this service life, determinations of energy content and the amount of loading per unit of energy generated (kg/MWh). In the 8 mires in the Köyhäjoki basin, Central Ostrobothnia, taken as an example, the loading of suspended solids (SS) in the drainage ditch networks calculated on the basis of the typical values obtained here and existing mire and peat data and expressed per unit of energy generated varied between the mires and horizons in the range 0.9 16.5 kg/MWh. One of the aims of this work was to develop means of making better use of existing mire and peat data and the results of corings and other field investigations. In this respect combination of the typical loading values (kg/ha) obtained here for S, SC, CS and C peats and the various degrees of humification (H 2.5 8.5) with the above mire and peat data by means of a computer program for the acquisition and handling of such data would enable all the information currently available and that deposited in the system in the future to be used for defining watercourse loading estimates for mires and comparing them with the corresponding estimates of energy content. The intention behind this work has been to respond to the challenge facing the energy generation industry to find larger peat production areas that exert less loading on the environment and to that facing the environmental authorities to improve the means available for estimating watercourse loading from peat production and its environmental impacts in advance. The results conform well to the initial hypothesis and to the goals laid down for the research and should enable watercourse loading from existing and planned peat production to be evaluated better in the future and the resulting impacts to be taken into account when planning land use and energy generation. The advance loading information available in this way would be of value in the selection of individual peat production areas, the planning of their exploitation, the introduction of water protection measures and the planning of loading inspections, in order to achieve controlled peat production that pays due attention to environmental considerations.

Geological factors affecting on after-use of Finnish cut-over peatlands : with implications on the carbon accumulation

In Finland, peat harvesting sites are utilized down almost to the mineral soil. In this situation the properties of mineral subsoil are likely to have considerable influence on the suitability for the various after-use forms. The aims of this study were to recognize the chemical and physical properties of mineral subsoils possibly limiting the after-use of cut-over peatlands, to define a minimum practice for mineral subsoil studies and to describe the role of different geological areas. The future percentages of the different after-use forms were predicted, which made it possible to predict also carbon accumulation in this future situation. Mineral subsoils of 54 different peat production areas were studied. Their general features and grain size distribution was analysed. Other general items studied were pH, electrical conductivity, organic matter, water soluble nutrients (P, NO3-N, NH4-N, S and Fe) and exchangeable nutrients (Ca, Mg and K). In some cases also other elements were analysed. In an additional case study carbon accumulation effectiveness before the intervention was evaluated on three sites in Oulu area (representing sites typically considered for peat production). Areas with relatively sulphur rich mineral subsoil and pool-forming areas with very fine and compact mineral subsoil together covered approximately 1/5 of all areas. These areas were unsuitable for commercial use. They were recommended for example for mire regeneration. Another approximate 1/5 of the areas included very coarse or very fine sediments. Commercial use of these areas would demand special techniques - like using the remaining peat layer for compensating properties missing from the mineral subsoil. One after-use form was seldom suitable for one whole released peat production area. Three typical distribution patterns (models) of different mineral subsoils within individual peatlands were found. 57 % of studied cut-over peatlands were well suited for forestry. In a conservative calculation 26% of the areas were clearly suitable for agriculture, horticulture or energy crop production. If till without large boulders was included, the percentage of areas suitable to field crop production would be 42 %. 9-14 % of all areas were well suitable for mire regeneration or bird sanctuaries, but all areas were considered possible for mire regeneration with correct techniques. Also another 11 % was recommended for mire regeneration to avoid disturbing the mineral subsoil, so total 20-25 % of the areas would be used for rewetting. High sulphur concentrations and acidity were typical to the areas below the highest shoreline of the ancient Litorina sea and Lake Ladoga Bothnian Bay zone. Also differences related to nutrition were detected. In coarse sediments natural nutrient concentration was clearly higher in Lake Ladoga Bothnian Bay zone and in the areas of Svecokarelian schists and gneisses, than in Granitoid area of central Finland and in Archaean gneiss areas. Based on this study the recommended minimum analysis for after-use planning was for pH, sulphur content and fine material (<0.06 mm) percentage. Nutrition capacity could be analysed using the natural concentrations of calcium, magnesium and potassium. Carbon accumulation scenarios were developed based on the land-use predictions. These scenarios were calculated for areas in peat production and the areas released from peat production (59300 ha + 15 671 ha). Carbon accumulation of the scenarios varied between 0.074 and 0.152 million t C a-1. In the three peatlands considered for peat production the long term carbon accumulation rates varied between 13 and 24 g C m-2 a-1. The natural annual carbon accumulation had been decreasing towards the time of possible intervention.

Isotopic records of terrestrial ice age environments in mammoth bioapatite

Palaeoenvironments of the latter half of the Weichselian ice age and the transition to the Holocene, from ca. 52 to 4 ka, were investigated using isotopic analysis of oxygen, carbon and strontium in mammal skeletal apatite. The study material consisted predominantly of subfossil bones and teeth of the woolly mammoth (Mammuthus primigenius Blumenbach), collected from Europe and Wrangel Island, northeastern Siberia. All samples have been radiocarbon dated, and their ages range from >52 ka to 4 ka. Altogether, 100 specimens were sampled for the isotopic work. In Europe, the studies focused on the glacial palaeoclimate and habitat palaeoecology. To minimise the influence of possible diagenetic effects, the palaeoclimatological and ecological reconstructions were based on the enamel samples only. The results of the oxygen isotope analysis of mammoth enamel phosphate from Finland and adjacent nortwestern Russia, Estonia, Latvia, Lithuania, Poland, Denmark and Sweden provide the first estimate of oxygen isotope values in glacial precipitation in northern Europe. The glacial precipitation oxygen isotope values range from ca. -9.2±1.5 in western Denmark to -15.3 in Kirillov, northwestern Russia. These values are 0.6-4.1 lower than those in present-day precipitation, with the largest changes recorded in the currently marine influenced southern Sweden and the Baltic region. The new enamel-derived oxygen isotope data from this study, combined with oxygen isotope records from earlier investigations on mammoth tooth enamel and palaeogroundwaters, facilitate a reconstruction of the spatial patterns of the oxygen isotope values of precipitation and palaeotemperatures over much of Europe. The reconstructed geographic pattern of oxygen isotope levels in precipitation during 52-24 ka reflects the progressive isotopic depletion of air masses moving northeast, consistent with a westerly source of moisture for the entire region, and a circulation pattern similar to that of the present-day. The application of regionally varied δ/T-slopes, estimated from palaeogroundwater data and modern spatial correlations, yield reasonable estimates of glacial surface temperatures in Europe and imply 2-9°C lower long-term mean annual surface temperatures during the glacial period. The isotopic composition of carbon in the enamel samples indicates a pure C3 diet for the European mammoths, in agreement with previous investigations of mammoth ecology. A faint geographical gradient in the carbon isotope values of enamel is discernible, with more negative values in the northeast. The spatial trend is consistent with the climatic implications of the enamel oxygen isotope data, but may also suggest regional differences in habitat openness. The palaeogeographical changes caused by the eustatic rise of global sea level at the end of the Weichselian ice age was investigated on Wrangel Island, using the strontium isotope (Sr-87/Sr-86) ratios in the skeletal apatite of the local mammoth fauna. The diagenetic evaluations suggest good preservation of the original Sr isotope ratios, even in the bone specimens included in the study material. To estimate present-day environmental Sr isotope values on Wrangel Island, bioapatite samples from modern reindeer and muskoxen, as well as surface waters from rivers and ice wedges were analysed. A significant shift towards more radiogenic bioapatite Sr isotope ratios, from 0.71218 ± 0.00103 to 0.71491 ± 0.00138, marks the beginning of the Holocene. This implies a change in the migration patterns of the mammals, ultimately reflecting the inundation of the mainland connection and isolation of the population. The bioapatite Sr isotope data supports published coastline reconstructions placing the time of separation from the mainland to ca. 10-10.5 ka ago. The shift towards more radiogenic Sr isotope values in mid-Holocene subfossil remains after 8 ka ago reflects the rapid rise of the sea level from 10 to 8 ka, resulting in a considerable reduction of the accessible range area on the early Wrangel Island.

Mapping the carriage of flaA-restriction fragment length polymorphism Campylobacter genotypes on poultry carcasses through the processing chain and comparison to clinical isolates

Poultry are considered a major source for campylobacteriosis in humans. A total of 1866 Campylobacter spp. isolates collected through the poultry processing chain were typed using flaA-restriction fragment length polymorphism to measure the impact of processing on the genotypes present. Temporally related human clinical isolates (n = 497) were also typed. Isolates were obtained from whole chicken carcass rinses of chickens collected before scalding, after scalding, before immersion chilling, after immersion chilling and after packaging as well as from individual caecal samples. A total of 32 genotypes comprising at least four isolates each were recognised. Simpson's Index of Diversity (D) was calculated for each sampling site within each flock, for each flock as a whole and for the clinical isolates. From caecal collection to after packaging samples the D value did not change in two flocks, decreased in one flock and increased in the fourth flock. Dominant genotypes occurred in each flock but their constitutive percentages changed through processing. There were 23 overlapping genotypes between clinical and chicken isolates. The diversity of Campylobacter is flock dependant and may alter through processing. This study confirms that poultry are a source of campylobacteriosis in the Australian population although other sources may contribute.