若尔盖湿地公路对两栖类的生态影响

本文考察了若尔盖高寒泥炭湿地公路对高原林蛙（Rana kukunoris）、倭蛙（Narorana pleskei）和岷山蟾蜍（Bufo minshanicus）的生态影响。分析了公路对两栖动物空间分布和栖息地利用的影响，并用IBM模型探讨其可能作用机制，考察了两栖动物公路死亡的季节差异及影响公路死亡空间分布的景观因素。最后通过对若尔盖高寒湿地两栖动物陆地核心栖息地的分析，为若尔盖路域栖息地的管理提供依据。 1. 对公路周边6个沼泽水凼群进行了调查，每个样地设置5条样线（距离公路10m、20m、50m、100m和150m）。调查表明，在繁殖季节(5月)，距离公路距离对高原林蛙和倭蛙的相对数量都有显著作用，其效应明显大于其他各项栖息地环境参数。公路导致高原林蛙和倭蛙在公路周边种群密度降低，其相对数量从距离公路100m处到公路边缘一直呈现逐渐降低的趋势。在繁殖季节，若尔盖高寒湿地的公路生态影响域大约在100-150m之间，这一距离远远大于森林栖息地中公路对两栖类的生态影响域（35-40 m）。 在繁殖后期（9月），对公路周边16个草地样点的样线调查表明，公路对周边高原林蛙和倭蛙密度分布并未造成显著影响。 2. 二次模型的拟合表明繁殖季节高原林蛙和倭蛙在公路周边的密度分布符合钟型曲线。前人对森林公路两侧两栖类分布的研究也显示了类似的规律。我们通过基于个体的模型，模拟在了公路边缘100单位距离内的栖息地空间，栖息地环境质量呈梯度变化，动物个体在其中通过随机运动寻找适宜的栖息地。拟合结果表明，动物个体仅仅依照简单的运动规则寻找适宜栖息地，这种活动就可以导致公路周边栖息地中的动物分布曲线出现3个局部峰。公路周边两栖动物的钟型分布曲线可能仅仅是个体寻找适宜栖息地过程中出现的临时性群体分布模式。 3. 在若尔盖高寒湿地，公路交通造成了大量两栖类死亡。但是公路两栖类动物死亡的季节分布很不均匀：5月、8月和9月死亡数量很高，而7月和10月死亡数量却很低。这种季节性差异和两栖类各个生活史阶段的迁移运动有密切的关系。利用景观参数的逻辑斯蒂回归模型显示，距离公路1000-2000m范围内的湿草地比例对三种两栖类公路死亡概率均有很强的贡献。湿草地这一栖息地类型分类中有大量的沼泽水体，是两栖类重要的繁殖点和取食点。两栖类公路死亡概率湿草地的关系从一个侧面表明，要维持一个区域较高的两栖类种群数量，需要1000-2000m半径范围内存在大面积的湿草地。 4. 高原林蛙和岷山蟾蜍不同性别和年龄个体分布点的水体距离存在显著差异。不同种类、年龄的两栖类分布点距离水体距离的差异可能是由于对水体的依赖性造成的。而相同种类、年龄段的个体中，高原林蛙雌性、岷山蟾蜍亚成体和雌性的体重与分布点距水体距离有显著负相关，这可能是因为体重更大的个体对水体的依赖性更弱。考虑到过大的陆地核心栖息地面积在实际保护工作中存在操作上的困难，因此我们认为可以以水体周边90%个体的分布区为低限确定3种两栖类的最小陆地核心栖息地。但是，在同样的水体距离-两栖类密度分布格局下，水体的面积和分形参数对最小陆地核心栖息地半径的确定有一定影响。 Ecological effects of alpine wetland road on Rana kukunoris, Narorana pleskei, Bufo minshanicus was studied in Zoige wetland. The effects of road on distribution of amphibians and its possible underline mechanism was discussed based on empirical data and computer simulation. Road killed amphibians was surveyed in different season and those landscape factor which could have impact on road killing distribution was analyses. Core terrestrial habitat of amphibians in Zoige wetland was discussed in the consideration of conservation management. 1. Six pool groups was investigated in breeding season (May) of R. kukunoris, N. pleskei. Five transects at distance of 10m, 20m, 50m, 100m and 150m from road edge was surveyed in each pool groups. There was a significant effects of distance from road edge on relative counts of R. kukunoris, N. pleskei, which is much important than effects of other environmental factors. Road caused the density of R. kukunoris, N. pleskei decreased from distance of 100m from road to 10m from road. Road ecological effect zone of alpine wetland for amphibians is about 100-150m. It is much wider than those of forest roads, which is about 35-40m. However, studies on 16 grassland near road showed no significant effect of road on amphibians after breeding season (Sep.). 2. Quadratic model fit indicated that the distribution of R. kukunoris and N. Pleskei followed a hump like curve. Previous studies on forest road showed similar results. A 100×100 habitat with gradual environment besides road was simulated with a individual-based model, and animal seek for suitable habitat with stochastic locomotion in it. Simulation results indicated that 3 density peak of animal distribution can emergent followed a simply rules. The hump like density cure could be a temporal swarm pattern during the process of individual seeking for habitat. 3. Road traffic caused mass death of amphibians in Zoige wetland. There was much road killed amphibians in May, Aug and Sep than those in July and Oct. The fluctuation of road kill could be related with migration of amphibians between seasons. Logistic regression of landscape variables indicated that wet grassland in 1000-2000m is essential to predict the probability of road kill. Wet grassland is an important breeding and forage habitat for amphibians. It also indicated that mass wet grassland in 1000-2000m is essential for maintain a big amphibian population. 4. There was significant differences among distance from aquatic site of subadults, female and males of R. kukunoris and B. Minshanicus. Possibly, it was because of their dependence on water. There was a significant negative relationship between distance from aquatic site and individuals body mass. Estimates of core habitat that are too large may make it difficult to establish protective regulations. The smallest suitable terrestrial core habitats were defined as the terrestrial habitats used during migration to and from the wetlands, and for foraging by 90% of any life stage (adults, and subadults) in a season. However, even with the same amphibian distribution pattern along the distance from aquatic sites, the radii of smallest suitable terrestrial core habitats will be varied with the fractal parameters of aquatic site.

HIRFL-CSR实验环高频同轴谐振腔设计原理

介绍了同步加速器高频铁氧体加载腔体的设计原理和设计计算过程。详细说明了腔体加载铁氧体材料的作用和意义,并对传统的传输线理论计算结果、CST(Computer Simulation Technol-ogy)软件模拟计算结果和实际腔体测量结果进行了比较。

CSR中束流变压器的分析设计及射频堆积计算机模拟程序

兰州重离子加速器冷却储存环（HIRFL－CSR），作为一个新型加速器，对监控它运行的探测器性能提出了新的要求，研制新型、高精度、高性能的探测器是CSR建立的必然要求。我们为它设计了两种基于二次电子的飞行时间探测器。该探测器具有极好的时间分辨、非常少的能损和多重散射。特别在超重粒子的合成试验中，探测超重粒子非常合适。本论文包括四个章节。第一章综述了飞行时间探测器技术，简单介绍了RIBLL的飞行时间系统和CSR的飞行时间系统以及测量飞行时间的基本原理；并简单介绍了CSR束流诊断系统束流诊断元件的分布、种类及参数和本论文的研究工作及意义。第二章是和本论文飞行时间探测器有关的一些知识。简要阐述了二次电子发射原理；并对探测器用到的主要放大元件微通道板作了详细介绍。第三章和第四章详细论述了研制的两种基于二次电子的飞行时间探测器。它们分别采用电场和磁场将二次电子偏转到微通道板上放大来得到时间信号。详细介绍了探测器的结构、参数；并测量了它们的时间分辨。此外，还研制了一种非拦截式的束流诊断元件一一容性相位探针，包括探针的结构及测试结果。

基于贝塞尔曲线的WSN等值线绘制算法

从无线传感器网络(WSN)环境数值监测应用的实际需求出发,提出了一种应用于该类场景中的等值线绘制(CMBC)算法.CMBC算法基于图形学中常用的贝塞尔(Bezier)曲线理论,通过选择部分节点提供信息给网关节点绘制等值线.此方法有效解决了监测应用场景中对最终监测精度的需求与大量报告节点所引发的高流量负载和网络能耗之间的矛盾.仿真结果表明,CMBC算法和已有研究工作相比能够使用更少的汇报节点完成高精度等值线的绘制,因此CMBC算法能够节省节点的能量,延长网络的生存期.

散景效果的真实感绘制

针对现有方法绘制的散景效果真实感较差的问题,提出一种基于几何光学理论的散景效果真实感绘制方法.该方法以光线传播的折射定律为基础,利用序列光线追踪方法对相机镜头的光学成像特性进行精确建模;对相机镜头的内部结构进行精确模拟,包括孔径光阑和渐晕光阑,以绘制出由孔径形状和渐晕共同作用的散景效果;利用几何光学理论和序列光线追踪方法精确计算出出射光瞳的位置和大小,以辅助光线采样,提高光线追踪效率.绘制结果表明,利用该方法能够绘制出较为逼真的散景效果,正确模拟了孔径形状和渐晕对散景效果的影响,并具有较高的光线追踪效率.

无线多跳网中具有网络编码意识的机会路由协议

针对现有COPE协议消极编码的问题,提出一种具有网络编码意识的机会路由协议NCAOR。该协议兼取机会路由和网络编码的优势实现高效地报文投递。在每一跳转发时,节点均选取多个冗余邻居节点构成机会节点集协助数据发送。收到报文后,机会节点利用局部拓扑知识和侦听的邻居报文接收信息判断转发报文的网络编码机会,并通过综合路径距离和编码收益的效用函数评估报文转发效能,智能设置转发响应时间。仿真结果表明,该协议相对采用最短路径路由的COPE方案具有网络吞吐量大、能耗低和节点编码机会更多的优点。

Heterogeneity in structurally arrested hard spheres

When cooled or compressed sufficiently rapidly, a liquid vitrifies into a glassy amorphous state. Vitrification in a dense liquid is associated with jamming of the particles. For hard spheres, the density and degree of order in the final structure depend on the compression rate: simple intuition suggests, and previous computer simulation demonstrates, that slower compression results in states that are both denser and more ordered. In this work, we use the Lubachevsky-Stillinger algorithm to generate a sequence of structurally arrested hard-sphere states by varying the compression rate.

The investigation of exfoliation process of organic modified montmorillonite in thermoplastic polyurethane with different molecular weights

Cloisite 30B (30B) was melt-mixed with two kinds of thermoplastic polyurethane (TPU) with different molecular weights to discern the roles of molecular diffusion and shear in the exfoliation process. The higher level of exfoliation was achieved in TPU matrix with higher molecular weight due to the appropriate viscosity. In order to have an insight into the mechanism of exfoliation, the degree of dispersion and exfoliation of 30B was characterized by wide angle X-ray diffraction and transmission electron microscopy. The layers of 30B were exfoliated via a slippage process, which was also observed in polyamide 12 nanocomposites recently.

Effects of polar group saturation on physical gelation of Amphiphilic polymer solutions

Monte Carlo simulation on the basis of the comblike coarse grained nonpolar/polar (NP) model has been carried out to study the polar group saturation effect on physical gelation of amphiphilic polymer solutions. The effects of polar group saturation due to hydrogen bonding or ion bridging on the sol-gel phase diagram, microstructure of aggregates, and chain conformation of amphiphilic polymer solutions under four different solvent conditions to either the nonpolar backbone or the polar side chain in amphiphilic polymer chains have been investigated. It is found that an increase of polar group saturation results in a monotonically decreased critical concentration of gelation point, which can be qualitatively supported by the dynamic theological measurements on pectin aqueous solutions. Furthermore, various solvent conditions to either the backbone or the side chain have significant impact on both chain conformation and microstructure of aggregates. When the solvent is repulsive to the nonpolar backbone but attractive to the polar side chain, the polymer chains are collapsed, and the gelation follows the mechanism of colloidal packing; at the other solvent conditions, the gelation follows the mechanism of random aggregation.

Influence of molecular topology on the static and dynamic properties of single polymer chain in solution

The influence of molecular topology on the structural and dynamic properties of polymer chain in solution with ring structure, three-arm branched structure, and linear structure are studied by molecular dynamics simulation. At the same degree of polymerization (N), the ring-shaped chain possesses the smallest size and largest diffusion coefficient. With increasing N, the difference of the radii of gyration between the three types of polymer chains increases, whereas the difference of the diffusion coefficients among them decreases. However, the influence of the molecular topology on the static and the dynamic scaling exponents is small. The static scaling exponents decrease slightly, and the dynamic scaling exponents increase slightly, when the topology of the polymer chain is changed from linear to ring-shaped or three-arm branched architecture. The dynamics of these three types of polymer chain in solution is Zimm-like according to the dynamic scaling exponents and the dynamic structure factors.

Possibility of design of nanodevices by confined macromolecular self-assembly

Computer simulation has revealed that dual nanostructures for the development of nanodevices as nanowires, optical nanofibres and nanobatteries be obtained by the self-assembly of block copolymers confined geometry. The formation of individual nanostructures depends on the structures of block copolymers the confinement geometry and the interactions block copolymers and the boundary of the confinement geometry. In order to obtain individual nanostructures experimentally, attention needs to be paid to the manufacture of the confinement geometry and the design of the interactions between block copolymers and the boundary of the confinement geometry, The recently developed lithography technique should make experiments successful.

Species of rare earth (III), calcium (II) and zinc (II) in the presence of L-histidine and L-typtophane

Rare earth(III)-histidine (His)- tryptophane (Trp). Ca(II)-His-Trp and Zn(II)-His-Trp systems were studied by potentiometric titration and computer simulation under physiological conditions. The species of the systems and their stability constants were determined. The distributions of species of rare earth(III), Ca(II) and Zn(II) were discussed.

基于解耦控制的SCARA机器人轨迹跟踪控制器设计

SCARA型机器人的控制问题由于其动力学模型中没有重力矩项的作用而得以简化,由于在实际应用中经常要求其高速运动,则对具有强耦合的哥氏力与向心力的控制就成为制约其系统性能的重要问题。提出通过线性变换对机器人系统解耦,将高阶系统转化为解耦的低阶系统进行控制的方法,并且应用极点配置对解耦的系统求解机器人控制器。该方法无需测量关节速度和加速度,只需要测量关节位置信号。所提出的控制器既能保证闭环系统全局渐进稳定,又能通过对线性化系统闭环极点的配置来获得期望的闭环系统响应性能。仿真实验证明了所提出的控制器设计方法的可行性。