830 resultados para Development policies
Resumo:
Nowadays, one of the urgent issues regarding global climate change is to discuss the future of the second period of the Kyoto Protocol. However, the divergence of views and opinions among parties in the last Conference of the Parties of the United Nations Framework Convention on Climate Change, held in Durban in December 2011, is still large. One of the bones of contention is whether the emerging developing countries, like China, should make commitments and legally bind themselves to a Green House Gas (GHG) reduction target in near future. As the largest GHG emitting country, China and its energy and climate policies will play an important role in global climate change and will also significantly influence the other countries? policies and the global climate negotiation. In this paper, we review the current differences among parties in the Durban Conference, and we analyze the recent situation, barriers, and future policies in China. Finally we highlight the impact and potential effect of Clean Development Mechanisms in avoiding China?s barriers regarding climate change. Results show that China is making a great effort to mitigate climate change by establishing and reforming its energy and climate policies in order to achieve a low-carbon development. At the same time, more innovation and international collaboration is needed in China to achieve this goal.
Resumo:
The future economic growth for India is likely to result in rapid and accelerated surge in energy demand, with expected shortages in terms of supply. Many of its current policies and strategies are aimed at the improvement and possible maximization of energy production from the renewable sector. It is also clear that while energy conservation and energy efficiency can make an important contribution, renewable energies will be essential to the solution and are likely to play an increasingly important role for providing enhanced energy access, reducing consumption of fossil fuels, and helping India pursue its low-carbon progressive pathway. However, most of the states in India, like the northernmost state of Jammu and Kashmir, have experienced an energy crisis over a sustained period of time and the government both at center and state level has to embark upon with these pressing issues in a more sustainable manner and accordingly initiate various renewable energy projects within these states. This paper will provide a broad-spectrum view about the energy situation within Jammu and Kashmir and will highlight the current policies along with future strategies for the optimal utilization of renewable energy resources.
Resumo:
EU biofuels support Biofuels modelling with CAPRI Scenario setting Main results Concluding remarks Biofuels production and use will remain mainly driven by public support Strong links of biofuels to agricultural markets Development of second generation technologies would ease food-fuel links
Resumo:
Modeling is an essential tool for the development of atmospheric emission abatement measures and air quality plans. Most often these plans are related to urban environments with high emission density and population exposure. However, air quality modeling in urban areas is a rather challenging task. As environmental standards become more stringent (e.g. European Directive 2008/50/EC), more reliable and sophisticated modeling tools are needed to simulate measures and plans that may effectively tackle air quality exceedances, common in large urban areas across Europe, particularly for NO2. This also implies that emission inventories must satisfy a number of conditions such as consistency across the spatial scales involved in the analysis, consistency with the emission inventories used for regulatory purposes and versatility to match the requirements of different air quality and emission projection models. This study reports the modeling activities carried out in Madrid (Spain) highlighting the atmospheric emission inventory development and preparation as an illustrative example of the combination of models and data needed to develop a consistent air quality plan at urban level. These included a series of source apportionment studies to define contributions from the international, national, regional and local sources in order to understand to what extent local authorities can enforce meaningful abatement measures. Moreover, source apportionment studies were conducted in order to define contributions from different sectors and to understand the maximum feasible air quality improvement that can be achieved by reducing emissions from those sectors, thus targeting emission reduction policies to the most relevant activities. Finally, an emission scenario reflecting the effect of such policies was developed and the associated air quality was modeled.
Resumo:
Automated and semi-automated accessibility evaluation tools are key to streamline the process of accessibility assessment, and ultimately ensure that software products, contents, and services meet accessibility requirements. Different evaluation tools may better fit different needs and concerns, accounting for a variety of corporate and external policies, content types, invocation methods, deployment contexts, exploitation models, intended audiences and goals; and the specific overall process where they are introduced. This has led to the proliferation of many evaluation tools tailored to specific contexts. However, tool creators, who may be not familiar with the realm of accessibility and may be part of a larger project, lack any systematic guidance when facing the implementation of accessibility evaluation functionalities. Herein we present a systematic approach to the development of accessibility evaluation tools, leveraging the different artifacts and activities of a standardized development process model (the Unified Software Development Process), and providing templates of these artifacts tailored to accessibility evaluation tools. The work presented specially considers the work in progress in this area by the W3C/WAI Evaluation and Report Working Group (ERT WG)
Resumo:
Sustainability and the food-water-environment nexus. Food-water linkages in global agro-economic models. The CAPRI water module. Potential to jointly assess food and water policies. Pilot case study. Further development.
Resumo:
The understanding of public perception to climate change is an essential factor in the development of adaptation policies. In the Mediterranean, agriculture, as the largest consumer of freshwater, has the highest potential to suffer adverse impacts of climate change. Future water availability predictions, conflicting interests among stakeholders and an increasing social concern about the environment further aggravate the situation. Therefore studying public support for adaptation policies can play a key role in successfully adapting the sector. The study site, approximately 36,000 hectares of rice fields in Seville (Spain), exemplifies an area in the Mediterranean where water needs to be carefully re-allocated in view of the limitations anticipated by climate change scenarios; in particular where conflicts will arise between water for agriculture and water for ‘natural’ ecosystems. This paper proposes an ex-ante evaluation of the societal support for adaptation policies. A survey of 117 respondents was conducted and a Logit model utilized to analyze which predictors positively or negatively affect people's support for adaptation policies. Results suggest that the main barriers to support these policies were economic losses and low climate change concern whereas the primary motivation factor was environmental commitment. Additionally, the main socio-demographic determinants were gender, age, education and family structure. In order to improve societal support for climate change adaptation policies, implementing educational and awareness raising initiatives will be the main challenges for policy makers to overcome.
Resumo:
This paper analyses empirical evidence of efforts to enable Spanish micro and small manufacturing companies to boost their labour productivity rates through the development of the main pillars of their corporate social responsibility (CSR) policies. This study aims to develop new approaches and sensibilities towards work from an ethical, values (virtues) and CSR perspective, showing how internal dimensions of CSR, such those related to relationships with employees and responsibility in processes and product quality, can improve labour performance and labour efficiency, thereby contributing to a better society. The results of a sample of 929 small businesses indicate that the social responsibility policies that most contributed to a short-term increase in labour productivity are those related to internal aspects of the company, in particular its involvement in the quality of processes and products, promotion of innovation and employee care. However, the impact on labour productivity of CSR policies related to external factors, such as relationship with stakeholders and environmental concern, could not be empirically proven in this paper.
Resumo:
La sostenibilidad de los sistemas olivareros situados en zonas de pendiente y montaña (SMOPS) en Andalucía se encuentra actualmente amenazada por las elevadas tasas de abandono que afectan a estos sistemas productivos. Así, la consumación de este proceso de abandono, no sólo pondría en peligro a las propias explotaciones, sino a todo el conjunto de bienes y servicios no productivos y al patrimonio cultural generado por este sistema productivo. En este contexto, la búsqueda de alternativas políticas enfocadas a revertir este proceso se erige como una necesidad categórica en aras de garantizar en el largo plazo la sostenibilidad de los olivares de montaña. Esta tesis pretende hacer frente a esta necesidad a través de la construcción de un marco político alternativo para los SMOPS, que permita la integración simultánea de todas las dimensiones que pueden influir en su desarrollo; esto es: el marco político actual, principalmente determinado por la Política Agraria Común (PAC) de la Unión Europea (UE); las preferencias de la sociedad hacia la oferta de bienes y servicios públicos generados por los SMOPS; y las preferencias y voluntad de innovación hacia nuevos manejos y sistemas de gestión de los agricultores y propietarios de las explotaciones. Para ello, se emplea una metodología de investigación mixta, que abarca la realización de cuatro encuestas (personales y online) llevadas a cabo a los agentes o grupos de interés involucrados directa o indirectamente en la gestión de los SMOPS –ciudadanos, agricultores y propietarios y expertos-; una profunda revisión de las herramientas de política agroambiental actuales y posibles alternativas a las mismas; y el desarrollo de nuevas estrategias metodológicas para dotar de mayor precisión y fiabilidad las estimaciones obtenidas a partir del Método del Experimento de Elección (MEE) en el campo de la valoración medioambiental. En general, los resultados muestran que una estrategia de política agroambiental basada en la combinación de los Contratos Territoriales de Zona Rural (CTZR) y el manejo ecológico supondría una mejora en la sostenibilidad de los sistemas olivareros de montaña andaluces, que, al mismo tiempo, propiciaría una mejor consideración de las necesidades y demandas de los agentes implicados en su gestión. Asimismo, los hallazgos obtenidos en esta investigación demandan un cambio de paradigma en los actuales pagos agroambientales, que han de pasar de una estrategia basada en la implementación de acciones, a otra enfocada al logro de objetivos, la cual, en el caso del olivar, se podría centrar en el aumento del secuestro de carbono en el suelo. Desde un punto de vista metodológico, los resultados han contribuido notablemente a mejorar la fiabilidad y precisión de las conclusiones estimadas a partir del MEE, mediante el diseño de un novedoso proceso iterativo para detectar posibles comportamientos inconsistentes por parte de los entrevistados con respecto a su máxima Disposición al Pago (DAP) para lograr la situación considerada como “óptima” en los olivares ecológicos de montaña andaluces. En líneas generales, el actual marco institucional favorece la puesta en práctica de la mayoría de las estrategias propuestas en esta tesis; sin embargo son necesarios mayores esfuerzos para reconducir los actuales Pagos Agroambientales y Climáticos de la PAC, hacia una estrategia de política agroambiental adaptada a las necesidades y requisitos del territorio en el que se aplica, enfocada al logro de objetivos y que sea capaz de integrar y coordinar al conjunto de agentes y grupos de interés involucrados -directa o indirectamente- en la gestión de los olivares de montaña. En este contexto, se espera que la puesta en práctica de nuevas estructuras y acuerdos de gobernanza territorial juegue un importante papel en el desarrollo de una política agroambiental realmente adaptada a las necesidades de los sistemas olivareros de montaña andaluces. ABSTRACT The long-term sustainability of Andalusian sloping and mountainous olive production systems (SMOPS) is currently threatened by the high abandonment rates that affect these production systems. The effective occurrence of this abandonment process is indeed menacing not only farms themselves, but also the wide array of public goods and services provided by SMOPS and the cultural heritage held by this production system. The search of policy alternatives aimed at tackling this process is thus a central necessity. This thesis aims to undertake this necessity by building an alternative policy framework for SMOPS that simultaneously integrates the several dimensions that are susceptible to influence it, namely: the current policy framework, mainly determined by the European Union’s (EU) Common Agricultural Policy (CAP); the social preferences toward the supply of SMOPS’ public goods and services; and farmers’ preferences and willingness to innovate toward new management practices in their farms. For this purpose, we put into practice a mixed-method strategy that combines four face-to-face and online surveys carried out with SMOPS’ stakeholders -including citizens, farmers and experts-; in-depth analysis of current and alternative agrienvironmental policy (AEP) instruments; and the development of novel methodological approaches to advance toward more reliable Discrete Choice Experiment’s (DCE) outcomes in the field of environmental valuation. Overall, results show that a policy strategy based on the combination of Territorial Management Contracts (TMC) and organic management would further enhance Andalusian SMOPS’ sustainability by simultaneously taking into account stakeholders’ demands and needs. Findings also call for paradigm shift of the current action-oriented design of Agri-Environmental-Climate Schemes (AECS), toward a result-based approach, that in the case of olive orchards should particularly be focused on enhancing soil carbon sequestration. From a methodological perspective, results have contributed to improve the accuracy and feasibility of DCE outcomes by designing a novel and iterative procedure focused in ascertaining respondents’ inconsistent behaviour with respect to their stated maximum WTP for the attainment of an ideal situation to be achieved in organic Andalusian SMOPS. Generally, the present institutional framework favours the implementation of the main policy strategies proposed in this thesis, albeit further efforts are required to better conduct current CAP’s agri-environmental instruments toward a territorially targeted result-oriented strategy capable to integrate and coordinate the whole set of stakeholders involved in the management of SMOPS. In this regard, alternative governance structures and arrangements are expected to play a major role on the process of tackling SMOPS’ agri-environmental policy challenge.
Resumo:
La mejora de la calidad del aire es una tarea eminentemente interdisciplinaria. Dada la gran variedad de ciencias y partes involucradas, dicha mejora requiere de herramientas de evaluación simples y completamente integradas. La modelización para la evaluación integrada (integrated assessment modeling) ha demostrado ser una solución adecuada para la descripción de los sistemas de contaminación atmosférica puesto que considera cada una de las etapas involucradas: emisiones, química y dispersión atmosférica, impactos ambientales asociados y potencial de disminución. Varios modelos de evaluación integrada ya están disponibles a escala continental, cubriendo cada una de las etapas antesmencionadas, siendo el modelo GAINS (Greenhouse Gas and Air Pollution Interactions and Synergies) el más reconocido y usado en el contexto europeo de toma de decisiones medioambientales. Sin embargo, el manejo de la calidad del aire a escala nacional/regional dentro del marco de la evaluación integrada es deseable. Esto sin embargo, no se lleva a cabo de manera satisfactoria con modelos a escala europea debido a la falta de resolución espacial o de detalle en los datos auxiliares, principalmente los inventarios de emisión y los patrones meteorológicos, entre otros. El objetivo de esta tesis es presentar los desarrollos en el diseño y aplicación de un modelo de evaluación integrada especialmente concebido para España y Portugal. El modelo AERIS (Atmospheric Evaluation and Research Integrated system for Spain) es capaz de cuantificar perfiles de concentración para varios contaminantes (NO2, SO2, PM10, PM2,5, NH3 y O3), el depósito atmosférico de especies de azufre y nitrógeno así como sus impactos en cultivos, vegetación, ecosistemas y salud como respuesta a cambios porcentuales en las emisiones de sectores relevantes. La versión actual de AERIS considera 20 sectores de emisión, ya sea equivalentes a sectores individuales SNAP o macrosectores, cuya contribución a los niveles de calidad del aire, depósito e impactos han sido modelados a través de matrices fuentereceptor (SRMs). Estas matrices son constantes de proporcionalidad que relacionan cambios en emisiones con diferentes indicadores de calidad del aire y han sido obtenidas a través de parametrizaciones estadísticas de un modelo de calidad del aire (AQM). Para el caso concreto de AERIS, su modelo de calidad del aire “de origen” consistió en el modelo WRF para la meteorología y en el modelo CMAQ para los procesos químico-atmosféricos. La cuantificación del depósito atmosférico, de los impactos en ecosistemas, cultivos, vegetación y salud humana se ha realizado siguiendo las metodologías estándar establecidas bajo los marcos internacionales de negociación, tales como CLRTAP. La estructura de programación está basada en MATLAB®, permitiendo gran compatibilidad con software típico de escritorio comoMicrosoft Excel® o ArcGIS®. En relación con los niveles de calidad del aire, AERIS es capaz de proveer datos de media anual y media mensual, así como el 19o valor horario más alto paraNO2, el 25o valor horario y el 4o valor diario más altos para SO2, el 36o valor diario más alto para PM10, el 26o valor octohorario más alto, SOMO35 y AOT40 para O3. En relación al depósito atmosférico, el depósito acumulado anual por unidad de area de especies de nitrógeno oxidado y reducido al igual que de azufre pueden ser determinados. Cuando los valores anteriormente mencionados se relacionan con características del dominio modelado tales como uso de suelo, cubiertas vegetales y forestales, censos poblacionales o estudios epidemiológicos, un gran número de impactos puede ser calculado. Centrándose en los impactos a ecosistemas y suelos, AERIS es capaz de estimar las superaciones de cargas críticas y las superaciones medias acumuladas para especies de nitrógeno y azufre. Los daños a bosques se calculan como una superación de los niveles críticos de NO2 y SO2 establecidos. Además, AERIS es capaz de cuantificar daños causados por O3 y SO2 en vid, maíz, patata, arroz, girasol, tabaco, tomate, sandía y trigo. Los impactos en salud humana han sido modelados como consecuencia de la exposición a PM2,5 y O3 y cuantificados como pérdidas en la esperanza de vida estadística e indicadores de mortalidad prematura. La exactitud del modelo de evaluación integrada ha sido contrastada estadísticamente con los resultados obtenidos por el modelo de calidad del aire convencional, exhibiendo en la mayoría de los casos un buen nivel de correspondencia. Debido a que la cuantificación de los impactos no es llevada a cabo directamente por el modelo de calidad del aire, un análisis de credibilidad ha sido realizado mediante la comparación de los resultados de AERIS con los de GAINS para un escenario de emisiones determinado. El análisis reveló un buen nivel de correspondencia en las medias y en las distribuciones probabilísticas de los conjuntos de datos. Las pruebas de verificación que fueron aplicadas a AERIS sugieren que los resultados son suficientemente consistentes para ser considerados como razonables y realistas. En conclusión, la principal motivación para la creación del modelo fue el producir una herramienta confiable y a la vez simple para el soporte de las partes involucradas en la toma de decisiones, de cara a analizar diferentes escenarios “y si” con un bajo coste computacional. La interacción con políticos y otros actores dictó encontrar un compromiso entre la complejidad del modeladomedioambiental con el carácter conciso de las políticas, siendo esto algo que AERIS refleja en sus estructuras conceptual y computacional. Finalmente, cabe decir que AERIS ha sido creado para su uso exclusivo dentro de un marco de evaluación y de ninguna manera debe ser considerado como un sustituto de los modelos de calidad del aire ordinarios. ABSTRACT Improving air quality is an eminently inter-disciplinary task. The wide variety of sciences and stakeholders that are involved call for having simple yet fully-integrated and reliable evaluation tools available. Integrated AssessmentModeling has proved to be a suitable solution for the description of air pollution systems due to the fact that it considers each of the involved stages: emissions, atmospheric chemistry, dispersion, environmental impacts and abatement potentials. Some integrated assessment models are available at European scale that cover each of the before mentioned stages, being the Greenhouse Gas and Air Pollution Interactions and Synergies (GAINS) model the most recognized and widely-used within a European policy-making context. However, addressing air quality at the national/regional scale under an integrated assessment framework is desirable. To do so, European-scale models do not provide enough spatial resolution or detail in their ancillary data sources, mainly emission inventories and local meteorology patterns as well as associated results. The objective of this dissertation is to present the developments in the design and application of an Integrated Assessment Model especially conceived for Spain and Portugal. The Atmospheric Evaluation and Research Integrated system for Spain (AERIS) is able to quantify concentration profiles for several pollutants (NO2, SO2, PM10, PM2.5, NH3 and O3), the atmospheric deposition of sulfur and nitrogen species and their related impacts on crops, vegetation, ecosystems and health as a response to percentual changes in the emissions of relevant sectors. The current version of AERIS considers 20 emission sectors, either corresponding to individual SNAP sectors or macrosectors, whose contribution to air quality levels, deposition and impacts have been modeled through the use of source-receptor matrices (SRMs). Thesematrices are proportionality constants that relate emission changes with different air quality indicators and have been derived through statistical parameterizations of an air qualitymodeling system (AQM). For the concrete case of AERIS, its parent AQM relied on the WRF model for meteorology and on the CMAQ model for atmospheric chemical processes. The quantification of atmospheric deposition, impacts on ecosystems, crops, vegetation and human health has been carried out following the standard methodologies established under international negotiation frameworks such as CLRTAP. The programming structure isMATLAB ® -based, allowing great compatibility with typical software such as Microsoft Excel ® or ArcGIS ® Regarding air quality levels, AERIS is able to provide mean annual andmean monthly concentration values, as well as the indicators established in Directive 2008/50/EC, namely the 19th highest hourly value for NO2, the 25th highest daily value and the 4th highest hourly value for SO2, the 36th highest daily value of PM10, the 26th highest maximum 8-hour daily value, SOMO35 and AOT40 for O3. Regarding atmospheric deposition, the annual accumulated deposition per unit of area of species of oxidized and reduced nitrogen as well as sulfur can be estimated. When relating the before mentioned values with specific characteristics of the modeling domain such as land use, forest and crops covers, population counts and epidemiological studies, a wide array of impacts can be calculated. When focusing on impacts on ecosystems and soils, AERIS is able to estimate critical load exceedances and accumulated average exceedances for nitrogen and sulfur species. Damage on forests is estimated as an exceedance of established critical levels of NO2 and SO2. Additionally, AERIS is able to quantify damage caused by O3 and SO2 on grapes, maize, potato, rice, sunflower, tobacco, tomato, watermelon and wheat. Impacts on human health aremodeled as a consequence of exposure to PM2.5 and O3 and quantified as losses in statistical life expectancy and premature mortality indicators. The accuracy of the IAM has been tested by statistically contrasting the obtained results with those yielded by the conventional AQM, exhibiting in most cases a good agreement level. Due to the fact that impacts cannot be directly produced by the AQM, a credibility analysis was carried out for the outputs of AERIS for a given emission scenario by comparing them through probability tests against the performance of GAINS for the same scenario. This analysis revealed a good correspondence in the mean behavior and the probabilistic distributions of the datasets. The verification tests that were applied to AERIS suggest that results are consistent enough to be credited as reasonable and realistic. In conclusion, the main reason thatmotivated the creation of this model was to produce a reliable yet simple screening tool that would provide decision and policy making support for different “what-if” scenarios at a low computing cost. The interaction with politicians and other stakeholders dictated that reconciling the complexity of modeling with the conciseness of policies should be reflected by AERIS in both, its conceptual and computational structures. It should be noted however, that AERIS has been created under a policy-driven framework and by no means should be considered as a substitute of the ordinary AQM.
Resumo:
Improvements over the past 30 years in statistical data, analysis, and related theory have strengthened the basis for science and technology policy by confirming the importance of technical change in national economic performance. But two important features of scientific and technological activities in the Organization for Economic Cooperation and Development countries are still not addressed adequately in mainstream economics: (i) the justification of public funding for basic research and (ii) persistent international differences in investment in research and development and related activities. In addition, one major gap is now emerging in our systems of empirical measurement—the development of software technology, especially in the service sector. There are therefore dangers of diminishing returns to the usefulness of economic research, which continues to rely completely on established theory and established statistical sources. Alternative propositions that deserve serious consideration are: (i) the economic usefulness of basic research is in the provision of (mainly tacit) skills rather than codified and applicable information; (ii) in developing and exploiting technological opportunities, institutional competencies are just as important as the incentive structures that they face; and (iii) software technology developed in traditional service sectors may now be a more important locus of technical change than software technology developed in “high-tech” manufacturing.
Resumo:
Endocrine disruptors are suspected to cause disruption to organisms in aquatic environments. Intersex fish and skewed populations of females outnumbering males have been found where effluents from municipal wastewater treatment plants enter into receiving waters. The science needed to substantiate a link of these suspected pollutants as the cause of problems to human health or the environmental is in its infancy. Empirical research was used to identify suspected endocrine disruptors, their sources, and the difficulties involved in regulating these emerging contaminants. This project examined entities that are addressing endocrine disruption and provides cost-effective recommendations for municipalities to develop policies to mitigate the amount of endocrine disruptors entering into receiving waters and limiting the effects caused by endocrine disruption.
Resumo:
Mexico has a long history of structuralized violence against its most vulnerable socioeconomic strata, the peasantry, also referred to as Campesinos. From the Spanish invasion, to the contemporary neoliberal development project, corn production has been intimately associated with disparate power relations both within Mexican society, and without, particularly in relations with the United States. This study sheds light on the incongruities of modernism implicit within neoliberal policy instruments such as Structural Adjustment Programs (SAP) and free trade agreements. It will demonstrate that while such policies benefit some, they principally exacerbate existing power disparities via disarticulated trade economics, subordinating rather than liberating Mexico's most vulnerable citizenry.
Resumo:
State and international entities can have profound effects on the development of a country’s nursing profession. Through a global health governance lens, this paper explores the development of nursing in Brazil during the early twentieth century, and its intersections with national and international interests. Accordingly, we will show how state policies established an environment that fostered the institutionalization of nursing as a profession in Brazil and supported it as a means to increase the presence of females in nation building processes. The State focused on recruiting elite women for nursing, in part due to the Rockefeller Foundation’s involvement in the country. Nurses who worked for Rockefeller came from well-educated classes within US society with specific ideas about who should be a nurse and the roles of nurses in a healthcare system. These women served as the primary vehicles for interacting with Brazilian health authorities responsible for health system development. Their early efforts did not, however, ensure a system capable of producing nursing human resources at a rate that, in present day Brazil, could meet the health needs of the country. Findings from this paper offer new avenues for historians to explore the early roots of professional nursing through a global health governance lens, improve the understanding of the intersection between international politics and professionalization, and highlight how these factors may impact nursing human resources production in the long term.
Resumo:
Increases in the rate and extent of lakeshore development along inland lakes in Ontario are adversely impacting water quality. Despite growing awareness, there is a lack of knowledge about the land use policies and tools in place to protect inland lakes in rural Ontario. This research evaluated official plans for water quality protection policies for inland lakes in the County of Renfrew, Ontario to address this gap. The findings suggest that municipalities implicitly link water quality to land use planning policy and fail to incorporate innovative methods to protect water quality.