912 resultados para Development Projects
Resumo:
Includes bibliography
Resumo:
Introduction There is a renewed call for a new approach to development with emphasis on community empowerment or participation, with the belief that more sustainable activities will be undertaken in those communities. Much of that call, however, is coming not from within the communities, but primarily from advocates of change who may have little to do with those communities. What then will the new approach bring apart from a change in who are the decision-makers? And how do we ensure that the change that is called for will, in fact, bring added benefits to the communities themselves? To be sure, there are some successful stories of a community approach to problem solving. However, there are also many more stories of project failures. Serious analytical work, therefore, needs to be done to determine the factors that promote a successful community-based approach; when this approach should be used; and the methodology that should be employed. In an attempt to determine these factors, a brief analysis will be made of some of the governing structures in the subregion and their possible impact on the proposed new approach. Some of the earlier efforts at stakeholder and community approach to projects will also be examined as well as the new development strategy that is prompting the call for this new paradigm. The new paradigm focuses to a large extent on decision-making and community empowerment. With few exceptions, it is short on the promotion of tangible activities that are based on the resource inventory of the communities. This is not surprising, since, as noted before, the advocates of community empowerment may have very little connection with the communities and, in most cases, are unfamiliar with the resource base. Hence, a theoretical case is made, suggesting more style than substance. Another obvious shortcoming of this new paradigm is its continued over- dependence on assistance from the outside to build communities. Externally funded projects, seminars and meetings outside of the communities and foreign technical assistance continue to dominate these projects. While, of course, all communities have basic common needs such as water, health, education and electricity, there is sufficient diversity within communities to allow for tailoring of activities and programmes such that their differences become assets. It is in that context, that agro-tourism activities, standards, agricultural diversification, food and nutrition and priority setting have been chosen as aspects and activities for promoting community development, drawing on the various strengths of communities, rural or urban.
Resumo:
Includes bibliography
Resumo:
Includes bibliography.
Resumo:
This report proposes a framework for locating, collecting, creating, sharing and applying information and knowledge (from within and outside the subregion) for development purposes in the Caribbean subregion. The framework emphasizes the importance of protecting and tapping into the rich cultural heritage and traditional knowledge of the Caribbean to support its development. This knowledge management for development framework, advanced by ECLAC, is proposed for consideration in the design and implementation of both national policies and strategies, and communitylevel projects to support the achievement of the Millennium Development Goals and the overall sustainable development of the Caribbean subregion. It considers six main elements, namely inputs, processes and tools, outputs, pillars (on which all the above are built on), the environment or context in which this, like any other scheme, operates and the monitoring and evaluation of knowledge management initiatives. The approach draws from examples of models, frameworks and initiatives developed worldwide, with particular emphasis on those from Latin America and the Caribbean.
Resumo:
Within the framework of the potential of geopark development and the interest of the geological community in creating new areas for geoconservation in Brazil, the aim of this contribution is to show the importance of geoscience education as a strategy for both geoconservation and development, and for the success and maintenance of new geoparks. A historical and evolutionary approach to the theme reveals the current status of geoscience education in Brazil and offers a panorama of the challenges inherent in preparing for the creation of new geoconservation areas. Proposals that aim to promote geoconservation and sustainability in Brazil include projects that capitalize on geological heritage and its relationship with local communities, proposals that form partnerships between the government, universities, businesses, and non-governmental organizations for the development of education, and changes in the law specifically aimed at geoconservation. Improvement in the educational system, including Earth science education, is undoubtedly one of the best strategies to promote the preservation of our natural heritage, and a cultural change in education will certainly promote changes in other areas.
Resumo:
Ozone, first discovered in the mid 1800’s, is a triatomic allotrope of oxygen that is a powerful oxidant. For over a century, research has been conducted into the synthetic application and mechanism of reactions of ozone with organic compounds. One of the major areas of interest has been the ozonolysis of alkenes. The production of carbonyl compounds is the most common synthetic application of ozonolysis. The generally accepted mechanism developed by Rudolf Criegee for this reaction involves the 1,3-electrocyclic addition of ozone to the π bond of the alkene to form a 1,2,3-trioxolane or primary ozonide. The primary ozonide is unstable at temperatures above -100 °C and undergoes cycloreversion to produce the carbonyl oxide and carbonyl intermediates. These intermediates then recombine in another 1,3-electrocyclic addition step to form the 1,2,4-trioxolane or final ozonide. While the final ozonide is often isolable, most synthetic applications of ozonolysis require a subsequent reductive or oxidative step to form the desired carbonyl compound. During investigations into the nucleophilic trapping of the reactive carbonyl oxide, it was discovered that when amines were used as additives, an increased amount of reaction time was required in order to consume all of the starting material. Surprisingly, significant amounts of aldehydes and a suppression of ozonide formation also occurred which led to the discovery that amine N-oxides formed by the ozonation of the amine additives in the reaction were intercepting the carbonyl oxide. From the observed production of aldehydes, our proposed mechanism for the in situ reductive ozonolysis reaction with amine N-oxides involves the nucleophilic trapping of the carbonyl oxide intermediate to produce a zwitterionic adduct that fragments into 1O2, amine and the carbonyl thereby avoiding the formation of peroxidic intermediates. With the successful total syntheses of peroxyacarnoates A and D by Dr. Chunping Xu, the asymmetric total synthesis of peroxyplakorate A3 was investigated. The peroxyplakoric acids are cyclic peroxide natural products isolated from the Plakortis species of marine sponge that have been found to exhibit activity against malaria, cancer and fungi. Even though the peroxyplakorates differ from the peroxyacarnoates in the polyunsaturated tail and the head group, the lessons learned from the syntheses of the peroxyacarnoates have proven to be valuable in the asymmetric synthesis of peroxyplakorate A3. The challenges for the asymmetric synthesis of peroxyplakorate A3 include the stereospecific formation of the 3-methoxy-1,2-dioxane core with a propionate head group and the introduction of oxidation sensitive dienyl tail in the presence of a reduction sensitive 1,2-dioxane core. It was found that the stereochemistry of two of the chiral centers could be controlled by an anti-aldol reaction of a chiral propionate followed by the stereospecific intramolecular cyclization of a hydroperoxyacetal. The regioselective ozonolysis of a 1,2-disubstituted alkene in the presence of a terminal alkyne forms the required hydroperoxyacetal as a mixture of diastereomers. Finally, the dienyl tail is introduced by a hydrometallation/iodination of the alkyne to produce a vinyl iodide followed by a palladium catalyzed coupling reaction. While the coupling reaction was unsuccessful in these attempts, it is still believed that the intramolecular cyclization to introduce the 1,2-dioxane core could prove to be a general solution to many other cyclic peroxides natural products.
Resumo:
Rural community development is a major issue for developing countries. Much attention has been given Information and Communication Technology (ICT) projects to connect rural communities with the global network. However, ICT resistance is a deterring factor in addressing the digital divide in developing countries. It is postulated that reversing the resistance to to ICT can be strategizedthrough "information acceptance." ICT can be accepted by rural communities by creating demand for information. The paper calls for the refocusing on the role of information in rural community development and ICT as a tool for change agent. Initiatives for rural community development must emphasize the importance of information in rural communities.
Resumo:
The Distributed Software Development (DSD) is a development strategy that meets the globalization needs concerned with the increase productivity and cost reduction. However, the temporal distance, geographical dispersion and the socio-cultural differences, increased some challenges and, especially, added new requirements related with the communication, coordination and control of projects. Among these new demands there is the necessity of a software process that provides adequate support to the distributed software development. This paper presents an integrated approach of software development and test that considers distributed teams peculiarities. The approach purpose is to offer support to DSD, providing a better project visibility, improving the communication between the development and test teams, minimizing the ambiguity and difficulty to understand the artifacts and activities. This integrated approach was conceived based on four pillars: (i) to identify the DSD peculiarities concerned with development and test processes, (ii) to define the necessary elements to compose the integrated approach of development and test to support the distributed teams, (iii) to describe and specify the workflows, artifacts, and roles of the approach, and (iv) to represent appropriately the approach to enable the effective communication and understanding of it.
Resumo:
Based on a study conducted in Ribeirao Preto, SP, Brazil in extra-hospital mental health services that addressed the organization of these services, therapeutic projects and the inclusion of psychosocial rehabilitation in health actions available, a theoretical-critical reflection concerning the development process of the therapeutic projects by the services' teams is presented. The qualitative study was conducted in an outpatient clinic and a Psychosocial Care Center. Data were collected through semi-structured interviews and focal groups. Data analysis was based on the hermeneutic dialectic philosophy of Jurgen Habermas according to the techniques of reconstruction and interpretation. Data analysis revealed that professionals have difficulty developing and managing therapeutic projects. Health actions are made available without being concretely supported by a proposal guiding the service's practical activities. The therapeutic projects are referred by professionals as the result of guidelines provided by management levels or technical orientations inherent to each profession but not as an activity that represents a philosophy of work of the health team. When the therapeutic project is focused on as a type of consensus that results from a communicative action directed to a mutual and intersubjective understanding among the members of the mental health extra-hospital team, the difficulties of the services' team dialogically organizing themselves to collectively construct the therapeutic project is evidenced.
Resumo:
Loaded with 16% of the world’s population, India is a challenged country. More than a third of its citizens live below the poverty line - on less than a dollar a day. These people have no proper electricity, no proper drinking water supply, no proper sanitary facilities and well over 40% are illiterates. More than 65% live in rural areas and 60% earn their livelihood from agriculture. Only a meagre 3.63% have access to telephone and less than 1% have access to a computer. Therefore, providing access to timely information on agriculture, weather, social, health care, employment, fishing, is of utmost importance to improve the conditions of rural poor. After some introductive chapters, whose function is to provide a comprehensive framework – both theoretical and practical – of the current rural development policies and of the media situation in India and Uttar Pradesh, my dissertation presents the findings of the pilot project entitled “Enhancing development support to rural masses through community media activity”, launched in 2005 by the Department of Mass Communication and Journalism of the Faculty of Arts of the University of Lucknow (U.P.) and by the local NGO Bharosa. The project scope was to involve rural people and farmers from two villages of the district of Lucknow (namely Kumhrava and Barhi Gaghi) in a three-year participatory community media project, based on the creation, implementation and use of a rural community newspaper and a rural community internet centre. Community media projects like this one have been rarely carried out in India because the country has no proper community media tradition: therefore the development of the project has been a challenge for the all stakeholders involved.
Resumo:
This artwork reports on two different projects that were carried out during the three years of Doctor of the Philosophy course. In the first years a project regarding Capacitive Pressure Sensors Array for Aerodynamic Applications was developed in the Applied Aerodynamic research team of the Second Faculty of Engineering, University of Bologna, Forlì, Italy, and in collaboration with the ARCES laboratories of the same university. Capacitive pressure sensors were designed and fabricated, investigating theoretically and experimentally the sensor’s mechanical and electrical behaviours by means of finite elements method simulations and by means of wind tunnel tests. During the design phase, the sensor figures of merit are considered and evaluated for specific aerodynamic applications. The aim of this work is the production of low cost MEMS-alternative devices suitable for a sensor network to be implemented in air data system. The last two year was dedicated to a project regarding Wireless Pressure Sensor Network for Nautical Applications. Aim of the developed sensor network is to sense the weak pressure field acting on the sail plan of a full batten sail by means of instrumented battens, providing a real time differential pressure map over the entire sail surface. The wireless sensor network and the sensing unit were designed, fabricated and tested in the faculty laboratories. A static non-linear coupled mechanical-electrostatic simulation, has been developed to predict the pressure versus capacitance static characteristic suitable for the transduction process and to tune the geometry of the transducer to reach the required resolution, sensitivity and time response in the appropriate full scale pressure input A time dependent viscoelastic error model has been inferred and developed by means of experimental data in order to model, predict and reduce the inaccuracy bound due to the viscolelastic phenomena affecting the Mylar® polyester film used for the sensor diaphragm. The development of the two above mentioned subjects are strictly related but presently separately in this artwork.
Resumo:
The following Ph.D work was mainly focused on catalysis, as a key technology, to achieve the objectives of sustainable (green) chemistry. After introducing the concepts of sustainable (green) chemistry and an assessment of new sustainable chemical technologies, the relationship between catalysis and sustainable (green) chemistry was briefly discussed and illustrated via an analysis of some selected and relevant examples. Afterwards, as a continuation of the ongoing interest in Dr. Marco Bandini’s group on organometallic and organocatalytic processes, I addressed my efforts to the design and development of novel catalytic green methodologies for the synthesis of enantiomerically enriched molecules. In the first two projects the attention was focused on the employment of solid supports to carry out reactions that still remain a prerogative of omogeneous catalysis. Firstly, particular emphasis was addressed to the discovery of catalytic enantioselective variants of nitroaldol condensation (commonly termed Henry reaction), using a complex consisting in a polyethylene supported diamino thiopene (DATx) ligands and copper as active species. In the second project, a new class of electrochemically modified surfaces with DATx palladium complexes was presented. The DATx-graphite system proved to be efficient in promoting the Suzuki reaction. Moreover, in collaboration with Prof. Wolf at the University of British Columbia (Vancouver), cyclic voltammetry studies were reported. This study disclosed new opportunities for carbon–carbon forming processes by using heterogeneous, electrodeposited catalyst films. A straightforward metal-free catalysis allowed the exploration around the world of organocatalysis. In fact, three different and novel methodologies, using Cinchona, Guanidine and Phosphine derivatives, were envisioned in the three following projects. An interesting variant of nitroaldol condensation with simple trifluoromethyl ketones and also their application in a non-conventional activation of indolyl cores by Friedel-Crafts-functionalization, led to two novel synthetic protocols. These approaches allowed the preparation of synthetically useful trifluoromethyl derivatives bearing quaternary stereocenters. Lastly, in the sixth project the first γ-alkylation of allenoates with conjugated carbonyl compounds was envisioned. In the last part of this Ph.D thesis bases on an extra-ordinary collaboration with Prof. Balzani and Prof. Gigli, I was involved in the synthesis and characterization of a new type of heteroleptic cyclometaled-Ir(III) complexes, bearing bis-oxazolines (BOXs) as ancillary ligands. The new heteroleptic complexes were fully characterized and in order to examine the electroluminescent properties of FIrBOX(CH2), an Organic Light Emitting Device was realized.
Resumo:
The main objective of this research is to demonstrate that the Clean Development Mechanism (CDM), an instrument created under a global international treaty, can achieve multiple objectives beyond those for which it has been established. As such, while being already a powerful tool to contribute to the global fight against climate change, the CDM can also be successful if applied to different sectors not contemplated before. In particular, this research aimed at demonstrating that a wider utilization of the CDM in the tourism sector can represent an innovative way to foster sustainable tourism and generate additional benefits. The CDM was created by Article 12 of the Kyoto Protocol of the United Nations Framework Convention on Climate Change (UNFCCC) and represents an innovative tool to reduce greenhouse gases emissions through the implementation of mitigation activities in developing countries which generate certified emission reductions (CERs), each of them equivalent to one ton of CO2 not emitted in the atmosphere. These credits can be used for compliance reasons by industrialized countries in achieving their reduction targets. The logic path of this research begins with an analysis of the scientific evidences of climate change and its impacts on different economic sectors including tourism and it continues with a focus on the linkages between climate and the tourism sector. Then, it analyses the international responses to the issue of climate change and the peculiar activities in the international arena addressing climate change and the tourism sector. The concluding part of the work presents the objectives and achievements of the CDM and its links to the tourism sector by considering case studies of existing projects which demonstrate that the underlying question can be positively answered. New opportunities for the tourism sector are available.
Resumo:
Synthetic biology is a young field of applicative research aiming to design and build up artificial biological devices, useful for human applications. How synthetic biology emerged in past years and how the development of the Registry of Standard Biological Parts aimed to introduce one practical starting solution to apply the basics of engineering to molecular biology is presented in chapter 1 in the thesis The same chapter recalls how biological parts can make up a genetic program, the molecular cloning tecnique useful for this purpose, and an overview of the mathematical modeling adopted to describe gene circuit behavior. Although the design of gene circuits has become feasible the increasing complexity of gene networks asks for a rational approach to design gene circuits. A bottom-up approach was proposed, suggesting that the behavior of a complicated system can be predicted from the features of its parts. The option to use modular parts in large-scale networks will be facilitated by a detailed and shared characterization of their functional properties. Such a prediction, requires well-characterized mathematical models of the parts and of how they behave when assembled together. In chapter 2, the feasibility of the bottom-up approach in the design of a synthetic program in Escherichia coli bacterial cells is described. The rational design of gene networks is however far from being established. The synthetic biology approach can used the mathematical formalism to identify biological information not assessable with experimental measurements. In this context, chapter 3 describes the design of a synthetic sensor for identifying molecules of interest inside eukaryotic cells. The Registry of Standard parts collects standard and modular biological parts. To spread the use of BioBricks the iGEM competition was started. The ICM Laboratory, where Francesca Ceroni completed her Ph.D, partecipated with teams of students and Chapter 4 summarizes the projects developed.