Inspector's Handbook: Well Construction, 1969

This manual is intended to serve as an aid to inspectors on well construction. Since this type of work is a noteworthy departure from that found on normal highway construction, the average inspector will be unfamiliar with the procedures and terminology employed by the contractor and his men.

Käyttöpääoman hallinnan vaikutus suomalaisten pk-yritysten maksuvalmiuteen

Tämän kandidaatintutkielman tavoite on tarkastella suomalaisten pk-yritysten maksuvalmiuden ja käyttöpääoman hallinnan välistä yhteyttä. Tarkoitus on selvittää, voidaanko suomalaisten pk-yritysten maksuvalmiutta parantaa käyttöpääoman hallintaa tehostamalla ja onko siitä saatava hyöty toimialariippuvaista. Toimialavertailuun valittiin rakentaminen, koneiden ja laitteiden valmistus sekä jälleenmyynti. Aineisto tutkimukseen hankittiin Amadeus-tietokannasta. Tutkimuksessa hyödynnetään tilastollisia menetelmiä. Tilastolliset analyysit suoritetaan SAS Enterprise Guide -ohjelmistolla. Muuttujien välisiä suhteita tarkastellaan regressioanalyysin avulla, jotka suoritetaan jokaiselle toimialaluokalle ja kaikista toimialoista koostuvalle otokselle erikseen. Tutkimustulosten mukaan toimialasta riippumatta pk-yrityksen maksuvalmiutta voidaan parantaa käyttöpääoman hallintaa tehostamalla. Vaikutuksen suuruus riippuu kuitenkin toimialasta. Tutkimustulokset huomioiden pk-yritysten johdon tulisi resurssien niukkuudesta huolimatta kiinnittää huomiota käyttöpääoman hallintaan, erityisesti silloin kuin yrityksen maksuvalmius on uhattuna.

Privity of Contract and Third Party Rights in European Construction Projects

Privity of contract has lately been criticized in several European jurisdictions, particu-larly due to the onerous consequences it gives rise to in arrangements typical for the modern exchange such as chains of contracts. Privity of contract is a classical premise of contract law, which prohibits a third party to acquire or enforce rights under a contract to which he is not a party. Such a premise is usually seen to be manifested in the doctrine of privity of contract developed under common law, however, the jurisdictions of continental Europe do recognize a corresponding starting point in contract law. One of the traditional industry sectors affected by this premise is the construction industry. A typical large construction project includes a contractual chain comprised of an employer, a main contractor and a subcontractor. The employer is usually dependent on the subcontractor's performance, however, no contractual nexus exists between the two. Accordingly, the employer might want to circumvent the privity of contract in order to reach the subcontractor and to mitigate any risks imposed by such a chain of contracts. From this starting point, the study endeavors to examine the concept of privity of con-tract in European jurisdictions and particularly the methods used to circumvent the rule in the construction industry practice. For this purpose, the study employs both a com-parative and a legal dogmatic method. The principal aim is to discover general principles not just from a theoretical perspective, but from a practical angle as well. Consequently, a considerable amount of legal praxis as well as international industry forms have been used as references. The most important include inter alia the model forms produced by FIDIC as well as Olli Norros' doctoral thesis "Vastuu sopimusketjussa". According to the conclusions of this study, the four principal ways to circumvent privity of contract in European construction projects include liability in a chain of contracts, collateral contracts, assignment of rights as well as security instruments. The contempo-rary European jurisdictions recognize these concepts and the references suggest that they are an integral part of the current market practice. Despite the fact that such means of circumventing privity of contract raise a number of legal questions and affect the risk position of particularly a subcontractor considerably, it seems that the impairment of the premise of privity of contract is an increasing trend in the construction industry.

Desenvolvimento e aplicação de modelo de calibração multivariada para determinação de açúcares e ácidos orgânicos em bebidas comerciais utilizando espectroscopia no infravermelho

The routine analysis for quantization of organic acids and sugars are generally slow methods that involve the use and preparation of several reagents, require trained professional, the availability of special equipment and is expensive. In this context, it has been increasing investment in research whose purpose is the development of substitutive methods to reference, which are faster, cheap and simple, and infrared spectroscopy have been highlighted in this regard. The present study developed multivariate calibration models for the simultaneous and quantitative determination of ascorbic acid, citric, malic and tartaric and sugars sucrose, glucose and fructose, and soluble solids in juices and fruit nectars and classification models for ACP. We used methods of spectroscopy in the near infrared (Near Infrared, NIR) in association with the method regression of partial least squares (PLS). Were used 42 samples between juices and fruit nectars commercially available in local shops. For the construction of the models were performed with reference analysis using high-performance liquid chromatography (HPLC) and refractometry for the analysis of soluble solids. Subsequently, the acquisition of the spectra was done in triplicate, in the spectral range 12500 to 4000 cm-1. The best models were applied to the quantification of analytes in study on natural juices and juice samples produced in the Paraná Southwest Region. The juices used in the application of the models also underwent physical and chemical analysis. Validation of chromatographic methodology has shown satisfactory results, since the external calibration curve obtained R-square value (R2) above 0.98 and coefficient of variation (%CV) for intermediate precision and repeatability below 8.83%. Through the Principal Component Analysis (PCA) was possible to separate samples of juices into two major groups, grape and apple and tangerine and orange, while for nectars groups separated guava and grape, and pineapple and apple. Different validation methods, and pre-processes that were used separately and in combination, were obtained with multivariate calibration models with average forecast square error (RMSEP) and cross validation (RMSECV) errors below 1.33 and 1.53 g.100 mL-1, respectively and R2 above 0.771, except for malic acid. The physicochemical analysis enabled the characterization of drinks, including the pH working range (variation of 2.83 to 5.79) and acidity within the parameters Regulation for each flavor. Regression models have demonstrated the possibility of determining both ascorbic acids, citric, malic and tartaric with successfully, besides sucrose, glucose and fructose by means of only a spectrum, suggesting that the models are economically viable for quality control and product standardization in the fruit juice and nectars processing industry.

Medidas de concentração de radônio proveniente de argamassas de cimento portland, gesso e fosfogesso

Portland cement being very common construction material has in its composition the natural gypsum. To decrease the costs of manufacturing, the cement industry is substituting the gypsum in its composition by small quantities of phosphogypsum, which is the residue generated by the production of fertilizers and consists essentially of calcium dihydrate and some impurities, such as fluoride, metals in general, and radionuclides. Currently, tons of phosphogypsum are stored in the open air near the fertilizer industries, causing contamination of the environment. The 226 Ra present in these materials, when undergoes radioactive decay, produces the 222Rn gas. This radioactive gas, when inhaled together with its decay products deposited in the lungs, produces the exposure to radiation and can be a potential cause of lung cancer. Thus, the objective of this study was to measure the concentration levels of 222Rn from cylindrical samples of Portland cement, gypsum and phosphogypsum mortar from the state of Paraná, as well as characterizer the material and estimate the radon concentration in an environment of hypothetical dwelling with walls covered by such materials. Experimental setup of 222Rn activity measurements was based on AlphaGUARD detector (Saphymo GmbH). The qualitative and quantitative analysis was performed by gamma spectrometry and EDXRF with Au and Ag targets tubes (AMPTEK), and Mo target (ARTAX) and mechanical testing with x- ray equipment (Gilardoni) and the mechanical press (EMIC). Obtained average values of radon activity from studied materials in the air of containers were of 854 ± 23 Bq/m3, 60,0 ± 7,2 Bq/m3 e 52,9 ± 5,4 Bq/m3 for Portland cement, gypsum and phosphogypsum mortar, respectively. These results extrapolated into the volume of hypothetical dwelling of 36 m3 with the walls covered by such materials were of 3366 ± 91 Bq/m3, 237 ± 28 Bq/m3 e 208 ± 21 Bq/m3for Portland cement, gypsum and phosphogypsum mortar, respectively. Considering the limit of 300 Bq/m3 established by the ICRP, it could be concluded that the use of Portland cement plaster in dwellings is not secure and requires some specific mitigation procedure. Using the results of gamma spectrometry there were calculated the values of radium equivalent activity concentrations (Raeq) for Portland cement, gypsum and phosphogypsum mortar, which were obtained equal to 78,2 ± 0,9 Bq/kg; 58,2 ± 0,9 Bq/kg e 68,2 ± 0,9 Bq/kg, respectively. All values of radium equivalent activity concentrations for studied samples are below the maximum level of 370 Bq/kg. The qualitative and quantitative analysis of EDXRF spectra obtained with studied mortar samples allowed to evaluate quantitate and the elements that constitute the material such as Ca, S, Fe, and others.

Investigating the use of LiDAR scanning as a method for the measurement of timber distortion features

Measuring the extent to which a piece of structural timber has distorted at a macroscopic scale is fundamental to assessing its viability as a structural component. From the sawmill to the construction site, as structural timber dries, distortion can render it unsuitable for its intended purposes. This rejection of unusable timber is a considerable source of waste to the timber industry and the wider construction sector. As such, ensuring accurate measurement of distortion is a key step in addressing ineffciencies within timber processing. Currently, the FRITS frame method is the established approach used to gain an understanding of timber surface profile. The method, while reliable, is dependent upon relatively few measurements taken across a limited area of the overall surface, with a great deal of interpolation required. Further, the process is unavoidably slow and cumbersome, the immobile scanning equipment limiting where and when measurements can be taken and constricting the process as a whole. This thesis seeks to introduce LiDAR scanning as a new, alternative approach to distortion feature measurement. In its infancy as a measurement technique within timber research, the practicalities of using LiDAR scanning as a measurement method are herein demonstrated, exploiting many of the advantages the technology has over current approaches. LiDAR scanning creates a much more comprehensive image of a timber surface, generating input data multiple magnitudes larger than that of the FRITS frame. Set-up and scanning time for LiDAR is also much quicker and more flexible than existing methods. With LiDAR scanning the measurement process is freed from many of the constraints of the FRITS frame and can be done in almost any environment. For this thesis, surface scans were carried out on seven Sitka spruce samples of dimensions 48.5x102x3000mm using both the FRITS frame and LiDAR scanner. The samples used presented marked levels of distortion and were relatively free from knots. A computational measurement model was created to extract feature measurements from the raw LiDAR data, enabling an assessment of each piece of timber to be carried out in accordance with existing standards. Assessment of distortion features focused primarily on the measurement of twist due to its strong prevalence in spruce and the considerable concern it generates within the construction industry. Additional measurements of surface inclination and bow were also made with each method to further establish LiDAR's credentials as a viable alternative. Overall, feature measurements as generated by the new LiDAR method compared well with those of the established FRITS method. From these investigations recommendations were made to address inadequacies within existing measurement standards, namely their reliance on generalised and interpretative descriptions of distortion. The potential for further uses of LiDAR scanning within timber researches was also discussed.

Design and construction of a two dimensional duct equipped with a wave generator and a variable coastal slope and an ocean wave energy conversion system (OWC)

The aims of this thesis were evaluation the type of wave channel, wave current, and effect of some parameters on them and identification and comparison between types of wave maker in laboratory situations. In this study, designing and making of two dimension channels (flume) and wave maker for experiment son the marine buoy, marine building and energy conversion systems were also investigated. In current research, the physical relation between pump and pumpage and the designing of current making in flume were evaluated. The related calculation for steel building, channels beside glasses and also equations of wave maker plate movement, power of motor and absorb wave(co astal slope) were calculated. In continue of this study, the servo motor was designed and applied for moving of wave maker’s plate. One Ball Screw Leaner was used for having better movement mechanisms of equipment and convert of the around movement to linear movement. The Programmable Logic Controller (PLC) was also used for control of wave maker system. The studies were explained type of ocean energies and energy conversion systems. In another part of this research, the systems of energy resistance in special way of Oscillating Water Column (OWC) were explained and one sample model was designed and applied in hydrolic channel at the Sheikh Bahaii building in Azad University, Science and Research Branch. The dimensions of designed flume was considered at 16 1.98 0. 57 m which had ability to provide regular waves as well as irregular waves with little changing on the control system. The ability of making waves was evaluated in our designed channel and the results were showed that all of the calculation in designed flume was correct. The mean of error between our results and theory calculation was conducted 7%, which was showed the well result in this situation. With evaluating of designed OWC model and considering of changes in the some part of system, one bigger sample of this model can be used for designing the energy conversion system model. The obtained results showed that the best form for chamber in exit position of system, were zero degree (0) in angle for moving below part, forty and five (45) degree in front wall of system and the moving forward of front wall keep in two times of height of wave.

An epidemiological surveillance network of lumbar disc surgery to help prevention of and compensation for low back pain

International audience

Inter-industry analysis and monetary policy evaluations in the Korean flow of funds accounts

This study mainly aims to provide an inter-industry analysis through the subdivision of various industries in flow of funds (FOF) accounts. Combined with the Financial Statement Analysis data from 2004 and 2005, the Korean FOF accounts are reconstructed to form "from-whom-to-whom" basis FOF tables, which are composed of 115 institutional sectors and correspond to tables and techniques of input–output (I–O) analysis. First, power of dispersion indices are obtained by applying the I–O analysis method. Most service and IT industries, construction, and light industries in manufacturing are included in the first quadrant group, whereas heavy and chemical industries are placed in the fourth quadrant since their power indices in the asset-oriented system are comparatively smaller than those of other institutional sectors. Second, investments and savings, which are induced by the central bank, are calculated for monetary policy evaluations. Industries are bifurcated into two groups to compare their features. The first group refers to industries whose power of dispersion in the asset-oriented system is greater than 1, whereas the second group indicates that their index is less than 1. We found that the net induced investments (NII)–total liabilities ratios of the first group show levels half those of the second group since the former's induced savings are obviously greater than the latter.

Evaluación de la exposición laboral a sílice en empresas de diferentes sectores económicos en Colombia

Introducción: La sílice es un elemento de fácil aprovechamiento y por sus características fisicoquímicas ha sido ampliamente empleado en la industria como objetivo, materia prima o subproducto que genera silicosis en los trabajadores que han estado expuestos a polvo de sílice a través de los años y es una enfermedad que progresa incluso cuando la exposición cesa. La silicosis es conocida como una enfermedad de alta e histórica incidencia y prevalencia a nivel mundial, por lo que es necesario evaluar la exposición laboral a sílice (fracción respirable) en empresas pertenecientes a diferentes sectores económicos que están afiliadas una ARL en Colombia, para contribuir con información diagnóstica actualizada en diferentes regiones y en variadas actividades económicas. Objetivos: Evaluar la exposición laboral a sílice y el nivel de riesgo en empresas afiliadas a una ARL de acuerdo con su ubicación geográfica, actividad económica, área de trabajo, cargo y relacionar las medidas de control empleadas en cada empresa. Materiales y métodos: Se llevó a cabo un estudio de corte transversal sobre 239 mediciones de higiene industrial de 159 empresas de diferentes actividades través de la asociación de variables ocupacionales con las características de la exposición a sílice. Las variables cuantitativas fueron calculadas empleando medidas de tendencia central como media y mediana y medidas de dispersión como rango y desviación estándar con sus correspondientes coeficientes de variación. El nivel máximo permisible o TLV establecido de acuerdo con los parámetros señalados por la Conferencia Americana de Higienistas Industriales Gubernamentales (ACGIH en inglés) y empleado en este estudio para sílice cristalina, fue de 0,025 mg/m3. Resultados: Las actividades económicas que reportaron las mayores concentraciones corregidas a condiciones estándar de polvo de sílice fueron: la minería y actividades Extractivas con 6,340 mg/m3, el mantenimiento industrial, montajes electromecánicos y civiles con 1,312 mg/m3, la maquinaria, metalmecánica, electrodomésticos y equipos con 0,096 mg/m3 y la construcción con 0,702 mg/m3; Discusión: Se realizó un análisis segmentado en dos grupos A y B de acuerdo con el tiempo de medición, se encontró que para el índice de riesgo en ambos grupos indican una sobre-exposición de los trabajadores a niveles críticos, razón por la cual es necesario generar una estrategia de intervención que permita disminuir a tiempo las concentraciones de sílice en las áreas de trabajo y así reducir la exposición de los trabajadores.

A industrialização como criadora de conjuntos habitacionais para o operariado: o caso do Bairro da Empresa de Cimentos de Leiria: Maceira-Liz

A Revolução Industrial consistiu num amplo conjunto de mudanças que ocorreu nos séculos XVIII e XIX na Europa, em que a grande metamorfose na sociedade sucedeu devido à substituição do trabalho manual pelo uso da máquina. Constituiu-se como fenómeno abrangente que congregou fatores demográficos, sociais, ideológicos, políticos e económicos. A busca de melhores condições de vida e de trabalho, foi fator decisivo para o aumento de população nos grandes núcleos urbanos, circunstância que determinou a procura de uma solução que resolvesse a questão do alojamento da classe trabalhadora. Surgiram assim teorias utópicas e sociais e também modelos urbanísticos dos quais se salientam: o Falanstério de Charles Fourier, Familistério de Jean-Baptiste Godin entre outros. Em Portugal, a industrialização ocorreu mais tarde que na restante Europa, assim como as evoluções e transformações associadas a esta. É neste contexto, que a partir do século XIX, o sector agrícola no país foi sendo gradualmente substituído pela indústria. O aumento da industrialização conduziu a um incremento da concentração de mão-de-obra próxima de grandes cidades industriais, ocorrência que fomentou o aparecimento dos primeiros núcleos habitacionais destinados à classe operária. A cidade sofreu, assim, alterações assinaladas por uma série de acontecimentos resultantes da Revolução Industrial, a par da falta de estratégias ligadas à questão da habitação para as classes desfavorecidas. É neste enquadramento que surge o Bairro do Pessoal da Empresa de Cimento de Leiria, Maceira-Liz. Este procurou responder às necessidades dos trabalhadores oferecendo-lhes boa qualidade de vida. Foi dotado de infraestruturas e equipamentos como a “Casa do Pessoal” ou a Cooperativa Abastecedora, entre outros, necessários ao bom funcionamento e permitindo uma maior sociabilidade entres os seus habitantes Desta forma, para demostrar a sua importância, introduz-se o Bairro do Pessoal da E.C.L no estudo do contexto internacional e nacional. Observam-se e criam-se relações com os modelos das cidades utópicas do século XIX e os conjuntos industriais em Portugal, detentores de alojamento destinado à classe trabalhadora, fazendo uma análise urbanística detalhada do Bairro do Pessoal de Maceira- Liz, uma “Utopia” construída segundo o espirito progressista do seu fundador Henrique Sommer.A partir do estudo dos fundamentos teórico-práticos, da forma de implantação e construção, bem como dos vários planos elaborados para este complexo - que demonstravam uma tentativa de inovar, através da construção de respostas às mudanças da sociedade e arquitetura em Portugal- poderá observar- -se que Maceira-Liz tinha alternativas para resolver a situação sócio- laboral dos operários e tentava resolver questões como a insalubridade da habitação operária da I República. O Bairro do Pessoal de E.C.L. ou Bairro de Maceira-Liz é um dos mais significativos exemplos de urbanismo do tipo fabril em Portugal, que permite fazer uma reflexão crítica e arquitetónica do papel que a arquitetura assume face à questão das diferenças sociais de classes, ao mesmo tempo que se propõe uma solução de revitalização do Bairro a fim de contribuir para a sua preservação e conservação da sua identidade; ABSTRACT: The Industrial Revolution consisted in a wide range of changes that occurred in the eighteenth and nineteenth centuries in Europe, where the great metamorphosis in society succeeded due to the replacement of manual work by the use of machinery. It was established as a wide-ranging phenomenon which gathered demographic, social, ideological, political and economic factors. The search of better conditions of life and work was a decisive factor for the increase of population in major urban centers, a circumstance that led to the search for a solution to solve the question of working-class housing. Thus, utopian and social theories emerged, as also as urban models, of which we stand out: the Charles Fourier Phalanstery, Jean- Baptiste Godin Familistère and others. In Portugal, the industrialization occurred later than in the rest of Europe, as well as developments and changes associated with this. It is in this context that, starting in the nineteenth century, the agricultural sector in the country had been gradually replaced by the industry. The increased industrialization has led to an enlarged concentration of labor work close to major industrial cities, occurrence that fomented the appearance of the first housing units for the working class. So, the city suffered changes shown by a series of events resulting from the Industrial Revolution, together with the lack of strategies linked to the issue of housing for disadvantaged classes. It is in this context that comes the Neighborhood “Bairro do Pessoal da Empresa de Cimento de Leirio, Maceira – Liz”. This tried to respond to workers’ needs by offering them good quality of life. It was gifted with infrastructure and equipment as the “Staff Home” or the Cooperative Supplying, among others, needed for a proper functioning and allowing a greater sociability among its inhabitants. So, to demonstrate its importance, the Quarter of the Cement Company is introduced in the study of national and international context. Relationships with models of utopian cities in the nineteenth and the industrial plants in Portugal, owners of housing for the working class, are observed and created, making a detailed and urban analysis of the Quarter of the Cement Company, a “utopia “ built according to the progressive spirit of its founder Henry Sommer . From the study of the theoretical and practical fundamentals, the way of implementation and construction, as well as the various plans drawn up for this complex - which showed a determination to innovate by building responses to changes in society and architecture in Portugal - it can be founded that Maceira -Liz had alternatives to solve the socio- labor situation of the workers and tried to solve issues such as the unhealthiness of the working room of the First Republic. The Quarter of the Cement Company is one of the most significant examples of the industrial type urbanism in Portugal, which allows a critical and architectural reflection of the role that architecture assumes in what concerns the social class differences issues, while it is proposed a revitalization solution for the Neighborhood in order to contribute to the preservation and conservation of its identity

Mechanical properties of adobe blocks used in building construction in Huambo Province - Angola

Despite significant advances in building technologies with the use of conventional construction materials (as concrete and steel), which significantly have driven the construction industry, earth construction have demonstrated its importance and relevance, as well as it has matched in an efficient and eco-friendly manner the social housing concerns. The diversity of earth construction techniques allowed this material to adapt to different climatic, cultural and social contexts until the present time. However, in Angola, the construction with earth is still associated with population fringes of weak economic resources, for which, given the impossibility of being able to acquire modern construction materials (steel, cement, brick, among others), they resort to the use of available natural materials. Furthermore, the lack of scientific and technical knowledge justifies the negative appreciation of traditional building techniques, and the derogatory way how are considered the earth constructions in Angolan territory. Given the country's current development status, and taking into account the environmental requirements and the real socio-economic sustainability of Angola, it is considered that one of the viable and adequate options, could be the recovering and upgrading of the ancestral techniques of earth construction. The purpose of this research is to develop the technical and scientific knowledge in order to improve and optimize these construction solutions, responding to the real problems of housing quality as well as to the current social, economic and environmental sustainability requirements. In this paper, a description of the physical and mechanical characteristics of the adobes typically used in the construction of traditional houses in some localities of Huambo, province in Angola, is carried out. The methodology was based on mechanical in-situ testing in adobe blocks manufactured with traditional procedures: i) tensile strength evaluated with the bending test and compressive strength test on earth blocks specimens; and, ii) durability and erodibility test by Geelong method adopting the New Zealand standard (NZS) procedures (4297: 1998; 4297: 1998 and 4297: 1999). The results allow the characterization of the materials used in the construction of raw earth in the Huambo region, contributing to the development of knowledge of these sustainable and traditional housing constructive solutions with a strong presence in Angola [1, 2]. This study is part of a larger project in the area of Earth Construction [3], which aims to produce knowledge which can stimulate the use of environmental friendly construction materials and contribute to develop constructive solutions with improved performance, durability, comfort, safety and sustainability.

Development and characterization of cutting-edge equipment for EMC measurements and advanced power line filter design

This Doctoral Thesis aims at studying, developing, and characterizing cutting edge equipment for EMC measurements and proposing innovative and advanced power line filter design techniques. This document summarizes a three-year work, is strictly industry oriented and relies on EMC standards and regulations. It contains the main results, findings, and effort with the purpose of bringing innovative contributions at the scientific community. Conducted emissions interferences are usually suppressed with power line filters. These filters are composed by common mode chokes, X capacitors and Y capacitors in order to mitigate both the differential mode and common mode noise, which compose the overall conducted emissions. However, even at present days, available power line filter design techniques show several disadvantages. First of all, filters are designed to be implemented in ideal 50 Ω systems, condition which is far away from reality. Then, the attenuation introduced by the filter for common or differential mode noise is analyzed independently, without considering the possible mode conversion that can be produced by impedance mismatches, or asymmetries in either the power line filter itself or the equipment under test. Ultimately, the instrumentation used to perform conducted emissions measurement is, in most cases, not adequate. All these factors lead to an inaccurate design, contributing at increasing the size of the filter, making it more expensive and less performant than it should be.

Characterization Of Single Use Reactor Used For The Manufacturing Of Formulated Products Within The Pharmaceutical Industry

Mixing is a fundamental unit operation in the pharmaceutical industry to ensure consistent product quality across different batches. It is usually carried out in mechanically stirred tanks, with a large variety of designs according to the process requirements. A key aspect of pharmaceutical manufacturing is the extensive and meticulous cleaning of the vessels between runs to prevent the risk of contamination. Single-use reactors represent an increasing trend in the industry since they do not require cleaning and sterilization, reducing the need for utilities such as steam to sterilize equipment and the time between production batches. In contrast to traditional stainless steel vessels, single-use reactors consist of a plastic bag used as a vessel and disposed of after use. This thesis aims to characterize the fluid dynamics features and the mixing performance of a commercially available single-use reactor. The characterization employs a combination of various experimental techniques. The analysis starts with the visual observation of the liquid behavior inside the vessel, focusing on the vortex shape evolution at different impeller speeds. The power consumption is then measured using a torque meter to quantify the power number. Particle Image Velocimetry (PIV) is employed to investigate local fluid dynamics properties such as mean flow field and mean and rms velocity profiles. The same experimental setup of PIV is exploited for another optical measurement technique, the Planar Laser-Induced Fluorescence (PLIF). The PLIF measurements complete the characterization of the reactor with the qualitative visualization of the turbulent flow and the quantitative assessment of the system performance through the mixing time. The results confirm good mixing performances for the single-use reactor over the investigated impeller speeds and reveal that the filling volume plays a significant role in the fluid dynamics of the system.

[theoretical Construction In The Sociology Of Health: A Reflection On Its Trajectory].

The scope of this paper is to reflect on the theoretical construction in the constitution of the sociology of health, still called medical sociology in some countries. Two main ideas constitute the basis for this: interdisciplinarity and the degree of articulation in the fields of medicine and sociology. We sought to establish a dialogue with some dimensions - macro/micro, structure/action - that constitute the basis for understanding medicine/health in relation to the social/sociological dimension. The main aspects of these dimensions are initially presented. Straus' two medical sociologies and the theory/application impasses are then addressed, as well as the dilemmas of the sociology of medicine in the 1960s and 1970s. From these analyses the theoretical production before 1970 is placed as a counterpoint. Lastly, the sociology of health is seen in the general context of sociology, which underwent a fragmentation process from 1970 with effects in all subfields of the social sciences. This process involves a rethinking of the theoretical issues in a broadened spectrum of possibilities. The 1980s are highlighted when theoretical issues in the sociology of health are reinvigorated and the issue of interdisciplinarity is once again addressed.