954 resultados para Chemical Characterization
Resumo:
Six gases (N((CH3)3), NH2OH, CF3COOH, HCl, NO2, O3) were selected to probe the surface of seven combustion aerosol (amorphous carbon, flame soot) and three types of TiO2 nanoparticles using heterogeneous, that is gas-surface reactions. The gas uptake to saturation of the probes was measured under molecular flow conditions in a Knudsen flow reactor and expressed as a density of surface functional groups on a particular aerosol, namely acidic (carboxylic) and basic (conjugated oxides such as pyrones, N-heterocycles) sites, carbonyl (R1-C(O)-R2) and oxidizable (olefinic, -OH) groups. The limit of detection was generally well below 1% of a formal monolayer of adsorbed probe gas. With few exceptions most investigated aerosol samples interacted with all probe gases which points to the coexistence of different functional groups on the same aerosol surface such as acidic and basic groups. Generally, the carbonaceous particles displayed significant differences in surface group density: Printex 60 amorphous carbon had the lowest density of surface functional groups throughout, whereas Diesel soot recovered from a Diesel particulate filter had the largest. The presence of basic oxides on carbonaceous aerosol particles was inferred from the ratio of uptakes of CF3COOH and HCl owing to the larger stability of the acetate compared to the chloride counterion in the resulting pyrylium salt. Both soots generated from a rich and a lean hexane diffusion flame had a large density of oxidizable groups similar to amorphous carbon FS 101. TiO2 15 had the lowest density of functional groups among the three studied TiO2 nanoparticles for all probe gases despite the smallest size of its primary particles. The used technique enabled the measurement of the uptake probability of the probe gases on the various supported aerosol samples. The initial uptake probability, g0, of the probe gas onto the supported nanoparticles differed significantly among the various investigated aerosol samples but was roughly correlated with the density of surface groups, as expected. [Authors]
Biochemical characterization of a myelin fraction isolated from rat brain aggregating cell cultures.
Resumo:
Subcellular fractions isolated from rat brain aggregating cell cultures were studied by electron microscopy and showed the presence of typical myelin membranes. The chemical composition of purified culture myelin was similar to the fraction isolated from rat brain in terms of CNP specific activity, protein and lipid composition. The ratio of small to large components of myelin basic protein was comparable in culture and in vivo. These two proteins incorporated radioactive phosphorus. The major myelin glycoprotein was present and during development in culture its apparent molecular weight decreased although it never reached the position observed in myelin isolated from adult rats. In culture, the yield of myelin did not increase substantially between 33 and 50 days and was comparable to that of 15-day-old rat brain. The ratio basic protein to proteolipid protein resembled immature myelin and the cerebroside content was very low. A 'floating fraction' was isolated from the cultures and contained some myelin but mostly single membranes. Although these results indicate that myelin maturation is delayed in vitro this culture system provides substantial amounts of purified myelin to allow a complete biochemical analysis and metabolic studies during development.
Resumo:
This research project was conducted in an attempt to determine the cause of paste strength variability in Iowa fly ashes and to develop test methods to more adequately reflect fly ash physical and chemical characteristics. An extensive three year sampling and testing program was developed and initiated which incorporated fly ash from several Iowa power plants. Power plant design and operating data were collected. The variability was directly linked to power plant maintenance schedules and to sodium carbonate coal pretreatment. Fly ash physical and chemical properties can change drastically immediately before and after a maintenance outage. The concentrations of sulfate bearing minerals in the fly ash increases sharply during shutdown. Chemical, mineralogical, and physical testing indicated that the sodium, sulfate bearing minerals, lime and tricalcium aluminate contents of the fly ashes play important roles in the development of hydration reaction products in fly ash pastes. The weak pastes always contained ettringite as the major reaction product. The strong pastes contained straetlingite and monosulfoaluminate as the major reaction products along with minor amounts of ettringite. Recommendations for testing procedure changes and suggested interim test methods are presented.
Resumo:
Macrophage migration inhibitory factor (MIF), a proinflammatory cytokine, is considered an attractive therapeutic target in multiple inflammatory and autoimmune disorders. In addition to its known biologic activities, MIF can also function as a tautomerase. Several small molecules have been reported to be effective inhibitors of MIF tautomerase activity in vitro. Herein we employed a robust activity-based assay to identify different classes of novel inhibitors of the catalytic and biological activities of MIF. Several novel chemical classes of inhibitors of the catalytic activity of MIF with IC(50) values in the range of 0.2-15.5 microm were identified and validated. The interaction site and mechanism of action of these inhibitors were defined using structure-activity studies and a battery of biochemical and biophysical methods. MIF inhibitors emerging from these studies could be divided into three categories based on their mechanism of action: 1) molecules that covalently modify the catalytic site at the N-terminal proline residue, Pro(1); 2) a novel class of catalytic site inhibitors; and finally 3) molecules that disrupt the trimeric structure of MIF. Importantly, all inhibitors demonstrated total inhibition of MIF-mediated glucocorticoid overriding and AKT phosphorylation, whereas ebselen, a trimer-disrupting inhibitor, additionally acted as a potent hyperagonist in MIF-mediated chemotactic migration. The identification of biologically active compounds with known toxicity, pharmacokinetic properties, and biological activities in vivo should accelerate the development of clinically relevant MIF inhibitors. Furthermore, the diversity of chemical structures and mechanisms of action of our inhibitors makes them ideal mechanistic probes for elucidating the structure-function relationships of MIF and to further determine the role of the oligomerization state and catalytic activity of MIF in regulating the function(s) of MIF in health and disease.
Resumo:
Rapeseed (Brassica napus) oils differing in cultivar, sites of growth, and harvest year were characterized by fatty acid concentrations and carbon, hydrogen, and oxygen stable isotope analyses of bulk oils (delta(13)C(bulk), delta(2)H(bulk), delta(18)O(bulk) values) and individual fatty acids (delta(13)C(FA)). The delta(13)C(bulk), delta(2)H(bulk), and delta(18)O(bulk) values were determined by continuous flow combustion and high-temperature conversion elemental analyzer isotope ratio mass spectrometry (EA/IRMS, TC-EA/IRMS). The delta(13)C(FA) values were determined using gas chromatography-combustion isotope ratio mass spectrometry (GC/C/IRMS). For comparison, other C(3) vegetable oils rich in linolenic acid (flax and false flax oils) and rich in linoleic acid (poppy, sunflower, and safflower oils) were submitted to the same chemical and isotopic analyses. The bulk and molecular delta(13)C values were typical for C(3) plants. The delta(13)C value of palmitic acid (delta(13)C(16:0)) and n-3 alpha-linolenic acid (delta(13)C(18:3n-3)) differed (p < 0.001) between rape, flax, and poppy oils. Also within species, significant differences of delta(13)C(FA) were observed (p < 0.01). The hydrogen and oxygen isotope compositions of rape oil differed between cultivars (p < 0.05). Major differences in the individual delta(13)C(FA) values were found. A plant-specific carbon isotope fractionation occurs during the biosynthesis of the fatty acids and particularly during desaturation of C(18) acids in rape and flax. Bulk oil and specific fatty acid stable isotope analysis might be useful in tracing dietary lipids differing in their origin.
Resumo:
We investigated the immunogenicity and the conformational properties of the non-repetitive sequences of the Plasmodium falciparum circumsporozoite (CS) protein. Two polypeptides of 104 and 102 amino acids long, covering, respectively, the N- and C-terminal regions of the CS protein, were synthesized using solid phase Fmoc chemistry. The crude polypeptides were purified by a combination of size exclusion chromatography and RP-HPLC. Sera of mice immunized with the free polypeptides emulsified in incomplete Freund's adjuvant strongly reacted with the synthetic polypeptides as well as with native CS protein as judged by ELISA and IFAT assays. Most importantly, these antisera inhibited the sporozoite invasion of hepatoma cells. In addition, sera derived from donors living in a malaria endemic area recognized the CS 104- and 102-mers. Conformational studies of the CS polypeptides were also performed by circular dichroism spectroscopy showing the presence of a weakly ordered structure that can be increased by addition of trifluoroethanol. The obtained results indicate that the synthetic CS polypeptides and the natural CS protein share some common antigenic determinants and probably have similar conformation. The approach used in this study might be useful for the development of a synthetic malaria vaccine.
Resumo:
The glasses of the rosette forming the main window of the transept of the Gothic Cathedral of Tarragona have been characterised by means of SEM/EDS, XRD, FTIR and electronic microprobe. The multivariate statistical treatment of these data allow to establish a classification of the samples forming groups having an historical significance and reflecting ancient restorations. Furthermore, the decay patterns and mechanisms have been determined and the weathering by-products characterised. It has been demonstrated a clear influence of the bioactivity in the decay of these glasses, which activity is partially controlled by the chemical composition of the glasses.
Resumo:
The glasses of the rosette forming the main window of the transept of the Gothic Cathedral of Tarragona have been characterised by means of SEM/EDS, XRD, FTIR and electronic microprobe. The multivariate statistical treatment of these data allow to establish a classification of the samples forming groups having an historical significance and reflecting ancient restorations. Furthermore, the decay patterns and mechanisms have been determined and the weathering by-products characterised. It has been demonstrated a clear influence of the bioactivity in the decay of these glasses, which activity is partially controlled by the chemical composition of the glasses.
Resumo:
Abstract : The maintenance of genome stability is a challenge for all living organisms. DNA is regularly subjected to chemical alterations by both endogenous and exogenous DNA damaging agents. If left unrepaired, these lesions will create mutations or lead to chromosomal instability. DNA crosslinking agents probably bring about the most toxic lesions. By linking covalently the two strands of DNA, crosslinking agents will impede essential cellular processes such as replication and transcription. Cells from Fanconi anaemia patients are extremely sensitive to these agents. Fanconi anaemia (FA) is a rare chromosomal instability disorder that leads to developmental defects, pancytopenia and cancer susceptibility. FA is a genetically heterogeneous disease with thirteen complementation groups identified. Proteins encoded by the FA genes work together in the FA pathway. Eight of these proteins form the FA core complex (FANC-A, B, C,E, F, G, L and -M), whose integrity is required to monoubiquitinate FANCD2 and FANCI in response to DNA damage. The hypersensitivity of FA cells to crosslinking agents, which perturb the progression of replication forks, has led to the hypothesis that FA proteins play a crucial role in the response to replication stress. However, at the molecular level, the functions of the FA pathway remain largely unknown. Our efforts were first focused on the characterization of FANCD2, "the key effector of the FA pathway". Using different substrates, we found that in vitro, purified hFANCD2 preferentially binds single strand DNA and double strand DNA extremities. Concomitantly, FANCM was identified as a new component of the FA core complex. Moreover FANCM was shown to have specific branch migration activities and probably a role as a "landing platform" on DNA for the other components of the core complex. By using FANCM mutants carrying deletions within the internal domain, we investigated the role of FANCM as a DNA anchor protein for the core complex. We observed that indeed, a specific part of the internal domain of FANCM interacts with components of the core complex. Finally, in collaboration with Weidong Wang's lab we characterized two new components of the FA pathway: FAAP10 and FAAP16. As a heterodimer these two proteins show affinity for dsDNA, and anneal complementary oligonucleotides in vitro. Moreover these proteins can associate with FANCM via a part of its internal domain. We find that FANCM, FAAP 10 and FAAP 16 can co-exist on the branch point of replication and recombination intermediates, and that FAAP10 and FAAP16 stimulate replication fork reversal by FANCM. These results suggest that FANCM may function as a landing platform for the core complex. After loading on DNA, the core complex can activate FANCD2 through monoubiquitination leading to its recruitment to the site of damage. Since ssDNA and double strand breaks are intermediates that are generated as a consequence of collapsed replication forks, FANCD2 by binding to ds DNA ends and ssDNA could protect such structures from the recombination repair machinery and prevent unscheduled recombination events. Alternatively, FANCD2 could avoid nucleases from gaining access to collapsed forks, preserving the DNA in state that can be used as a starting point for resumption of DNA synthesis. The overall comprehension of the FA pathway is far from been complete. Our results unravel new aspects of Fanconi Anaemia, which hopefully in the near future will address keys questions leading to a better understanding of the fascinating Fanconi Anaemia. Résumé : Le maintien de l'intégrité du génome est fondamentale chez tous les organismes vivants. L'ADN est constamment altéré par des composés aussi bien endogènes qu'exogènes. Si ces altérations ne sont pas réparées, elles peuvent conduire à l'apparition de mutations, ainsi qu'à une instabilité génomique accrue. Les lésions les plus sévères qui peuvent survenir sur l'ADN, sont les pontages inter caténaires. Des agents pontants en liant de façon covalente les deux brins d'ADN, vont empêcher le déroulement normal de processus cellulaires essentiels tels que la réplication ou la transcription. La compréhension des mécanismes permettant à la cellule de tolérer et réparer ces lésions est primordiale, notamment dans le cas des patients atteints de l'anémie de Fanconi qui présentent une très grande sensibilité à ces composés pontants. L'anémie de Fanconi est une maladie génétique rare appartenant à un groupe de pathologies associées à une grande instabilité chromosomique. Les patients atteints de l'anémie de Fanconi présentent des malformations du squelette, une pancytopénie et une forte propension à la survenue de cancer. L'anémie de Fanconi est génétiquement très hétérogène. À ce jour, 13 gènes codant pour 13 protéines FANC différentes ont été identifiés. Huit de ces protéines fonctionnent ensemble au sein d'un complexe (nommé le complexe FANC) ayant pour but de monoubiquitiner FANCD2 et FANCI en réponse à la formation de lésions sur l'ADN. L'extrême sensibilité des cellules de patients atteints de l'anémie de Fanconi à ces agents pontant l'ADN suggère l'implication des protéines FANC dans la réponse cellulaire suite à une stress réplicatif. Cependant, le rôle moléculaire exact de ces protéines demeure encore inconnu. Après purification, nous avons observé que FANCD2 était capable de lier l'ADN simple brin, ainsi que les extrémités d'ADN in vitro. Dans le même temps, FANCM fut identifié comme appartenant au complexe FANC. FANCM est décrit comme une translocase capable de promouvoir le déplacement de point de jonction dans des structures d'ADN spécifiques in vitro. De plus, en se liant à l'ADN, FANCM peut agir comme une plateforme pour les autres protéines FANC, leur permettant ainsi d'être adressées à l'ADN. En créant des protéines FANCM recombinantes ayant des délétions dans le domaine interne, nous avons pu observer que certaines protéines du complexe FANC se fixent à des sites spécifiques sur le domaine interne de FANCM. Enfin, au travers d'une collaboration, nous avons été amenés à caractériser deux nouvelles protéines appartenant au complexe FANC : FAAP 10 et FAAP16. Elles s'associent à FANCM par l'intermédiaire du domaine interne, et forment ainsi un hétérotrimére. La présence de FAAP10 et FAAP16 n'affecte pas la liaison de FANCM à l'ADN, mais semble potentialiser son activité de régression in vitro. FANCM semble donc fonctionner comme une plateforme pour les autres composants du complexe FANC. Ces derniers, une fois liés à l'ADN permettent la monoubiquitination de FANCD2 et son recrutement au site lésé de l'ADN. FANCD2 en se liant de façon préférentielle à l'ADN simple brin et aux extrémités d'ADN qui sont générés lors de l'arrêt et du démantèlement d'une fourche de réplication, pourrait protéger ces même fourches de réplication arrêtées, d'évènements de recombinaison aléatoires. Nos résultats apportent de nouveaux éléments concernant les mécanismes moléculaires de l'anémie de Fanconi. Enfin, l'étude de l'anémie de Fanconi permet aussi de mieux comprendre les mécanismes mis en place par la cellule pour tolérer des lésions survenant lors de la réplication.
Resumo:
The objective of this work was to assess and characterize two clones, 169 and 685, of Cabernet Sauvignon grapes and to evaluate the wine produced from these grapes. The experiment was carried out in São Joaquim, SC, Brazil, during the 2009 harvest season. During grape ripening, the evolution of physical-chemical properties, phenolic compounds, organic acids, and anthocyanins was evaluated. During grape harvest, yield components were determined for each clone. Individual and total phenolics, individual and total anthocyanins, and antioxidant activity were evaluated for wine. The clones were also assessed regarding the duration of their phenological cycle. During ripening, the evolution of phenolic compounds and of physical-chemical parameters was similar for both clones; however, during harvest, significant differences were observed regarding yield, number of bunches per plant and berries per bunch, leaf area, and organic acid, polyphenol, and anthocyanin content. The wines produced from these clones showed significant differences regarding chemical composition. The clones showed similar phenological cycle and responses to bioclimatic parameters. Principal component analysis shows that clone 685 is strongly correlated with color characteristics, mainly monomeric anthocyanins, while clone 169 is correlated with individual phenolic compounds.
Resumo:
Erilaisia epäpuhtauksia kulkeutuu paperinvalmistusprosessiin ja monenlaisia saostumia muodostuu paperinvalmistuksen prosesseissa. Epäpuhtaudet voivat aiheuttaa prosessiongelmia sekä alentaa tuotteen laatua. Epäpuhtauksien alkuperän ja koostumuksen selvittäminen edellyttää usein erilaisten analyysimenetelmien käyttöä. Epäpuhtauksien luokittelu on useasti välttämätöntä ennen tarkempaa kemiallista analyysia. Paperinvalmistuksen epäpuhtauksien kvalitatiiviseen luokitteluun on yleisimmin käytetty mikroskopian, IR-spektroskopian ja analyyttisen pyrolyysin menetelmiä. Raman spektroskopia on harvinaisempi menetelmä paperiteollisuuden tutkimuksessa. Raman instrumenttien kehittyminen on ollut voimakasta viimeisen vuosikymmenen aikana. Raman spektroskopia onkin osoittanut mandollisuutensa polymeerien, lääketeollisuuden ja polttoaineteollisuuden tutkimuksissa. Tässä työssä tutkittiin erään elintarvikepakkauskartongin epäpuhtauksia Raman spektroskoopilla. Työn tavoitteena oli selvittää Raman analyysin käyttökelpoisuutta kartongin epäpuhtauksien online-luokittelussa. Tutkimukset suoritettiin Spectracoden RP-1 Raman instrumentilla. Tutkimukset osoittivat, että näytteen fluoresenssi ja näytteen hajoaminen asettavat rajoituksia epäpuhtauksien Raman analyysille. Epäpuhtauksien online-tunnistaminen toimii käytettäessä suuria lasertehoja ja säteilytysaikoja. Näytteiden laserherkkyys ja fluoresenssi rajoittavat kuitenkin suurien laiteparametrien käyttöä. Laiteparametrien pienentäminen johti mittauksien signaali-kohina suhteen alenemiseen, mikä puolestaan aiheutti online-tunnistuksen toimimattomuuden.
Resumo:
Amorphous silicon n-i-p solar cells have been fabricated entirely by Hot-Wire Chemical Vapour Deposition (HW-CVD) at low process temperature < 150 °C. A textured-Ag/ZnO back reflector deposited on Corning 1737F by rf magnetron sputtering was used as the substrate. Doped layers with very good conductivity and a very less defective intrinsic a-Si:H layer were used for the cell fabrication. A double n-layer (μc-Si:H/a-Si:H) and μc-Si:H p-layer were used for the cell. In this paper, we report the characterization of these layers and the integration of these layers in a solar cell fabricated at low temperature. An initial efficiency of 4.62% has been achieved for the n-i-p cell deposited at temperatures below 150 °C over glass/Ag/ZnO textured back reflector.
Resumo:
An aliphatic-aromatic copolyester of poly(ethylene terephthalate), PET, and poly(ethylene adipate), PEA, PET-co-PEA, was synthesized by the high temperature melt reaction of post-consumer PET and PEA. As observed by NMR spectroscopy, the reaction yielded random copolyesters in a few minutes through ester-interchange reactions, even without added catalyst. The copolyesters obtained in the presence of a catalyst presented higher intrinsic viscosity than that obtained without the addition of catalyst, due to simultaneous polycondensation and ester-interchange reactions. The structure of the aliphatic-aromatic copolyesters obtained in different PET/PEA ratio is random as observed by NMR analysis.
Resumo:
The decomposition of 〈͈Ŝ²〉 into atomic and diatomic contributions (local spin analysis) is used to detect and quantify the polyradical character of molecular systems. A model triradical system is studied in detail, and the local spin analysis is used to distinguish several patterns of local spin distributions and spin-spin interactions that can be found for different electronic states. How close a real molecular system is to an ideal system of k perfectly localized spin centers is utilized to define a measure of its k-radical character. The spin properties and triradical character of the lowest-lying electronic states of a number of all σ, all π, and σ-π organic triradicals are discussed in detail. The local spin contributions exhibit good correlation with experimental triradical stabilization energies
Resumo:
Doripenem was characterized through physicochemical and spectroscopic techniques, as well as thermal analysis. TLC (Rf = 0.62) and HPLC (rt = 7.4 min) were found to be adequate to identify the drug. UV and infrared spectra showed similar profile between doripenem bulk and standard. The ¹H and 13C NMR analysis revealed chemical shifts that allowed identifying the drug. Thermal analysis demonstrated three steps with mass loss, at 128, 178 and 276 ºC. The work was successfully applied to qualitative analysis of doripenem, showing the reported methods can be used for physicochemical characterization of doripenem