Priority research questions for the UK food system

The rise of food security up international political, societal and academic agendas has led to increasing interest in novel means of improving primary food production and reducing waste. There are however, also many ‘post-farm gate’ activities that are critical to food security, including processing, packaging, distributing, retailing, cooking and consuming. These activities all affect a range of important food security elements, notably availability, affordability and other aspects of access, nutrition and safety. Addressing the challenge of universal food security, in the context of a number of other policy goals (e.g. social, economic and environmental sustainability), is of keen interest to a range of UK stakeholders but requires an up-to-date evidence base and continuous innovation. An exercise was therefore conducted, under the auspices of the UK Global Food Security Programme, to identify priority research questions with a focus on the UK food system (though the outcomes may be broadly applicable to other developed nations). Emphasis was placed on incorporating a wide range of perspectives (‘world views’) from different stakeholder groups: policy, private sector, non-governmental organisations, advocacy groups and academia. A total of 456 individuals submitted 820 questions from which 100 were selected by a process of online voting and a three-stage workshop voting exercise. These 100 final questions were sorted into 10 themes and the ‘top’ question for each theme identified by a further voting exercise. This step also allowed four different stakeholder groups to select the top 7–8 questions from their perspectives. Results of these voting exercises are presented. It is clear from the wide range of questions prioritised in this exercise that the different stakeholder groups identified specific research needs on a range of post-farm gate activities and food security outcomes. Evidence needs related to food affordability, nutrition and food safety (all key elements of food security) featured highly in the exercise. While there were some questions relating to climate impacts on production, other important topics for food security (e.g. trade, transport, preference and cultural needs) were not viewed as strongly by the participants.

Adsorption of organic molecules at the TiO2(110) surface: the effect of van der Waals interactions

Understanding the interaction of organic molecules with TiO2 surfaces is important for a wide range of technological applications. While density functional theory (DFT) calculations can provide valuable insight about these interactions, traditional DFT approaches with local exchange-correlation functionals suffer from a poor description of non-bonding van der Waals (vdW) interactions. We examine here the contribution of vdW forces to the interaction of small organic molecules (methane, methanol, formic acid and glycine) with the TiO2 (110) surface, based on DFT calculations with the optB88-vdW functional. The adsorption geometries and energies at different configurations were also obtained in the standard generalized gradient approximation (GGA-PBE) for comparison. We find that the optB88-vdW consistently gives shorter surface adsorbate-to-surface distances and slightly stronger interactions than PBE for the weak (physisorbed) modes of adsorption. In the case of strongly adsorbed (chemisorbed) molecules both functionals give similar results for the adsorption geometries, and also similar values of the relative energies between different chemisorption modes for each molecule. In particular both functionals predict that dissociative adsorption is more favourable than molecular adsorption for methanol, formic acid and glycine, in general agreement with experiment. The dissociation energies obtained from both functionals are also very similar, indicating that vdW interactions do not affect the thermodynamics of surface deprotonation. However, the optB88-vdW always predicts stronger adsorption than PBE. The comparison of the methanol adsorption energies with values obtained from a Redhead analysis of temperature programmed desorption data suggests that optB88-vdW significantly overestimates the adsorption strength, although we warn about the uncertainties involved in such comparisons.

A proof of van Aubel's theorem using orthogonal vectors

We show how two linearly independent vectors can be used to construct two orthogonal vectors of equal magnitude in a simple way. The proof that the constructed vectors are orthogonal and of equal magnitude is a good exercise for students studying properties of scalar and vector triple products. We then show how this result can be used to prove van Aubel's theorem that relates the two line segments joining the centres of squares on opposite sides of a plane quadrilateral.

Influence of dentin cavity surface finishing on micro-tensile bond strength of adhesives

The current trend toward minimal-invasive dentistry has introduced innovative techniques for cavity preparation. Chemical vapor deposition (CVD) and laser-irradiation technology have been employed as an alternative to the common use of regular burs in high-speed turbines. Objectives. The purpose of this study was to assess the influence of alternative techniques for cavity preparation on the bonding effectiveness of different adhesives to dentin, and to evaluate the morphological characteristics of dentin prepared with those techniques. Methods. One etch&rinse adhesive (OptiBond FL, Kerr) and three self-etch systems (Adper Prompt L-Pop, 3M ESPE; Clearfil SE Bond, Kuraray; Clearfil S3 Bond, Kuraray) were applied on dentin prepared with a regular bur in a turbine, with a CVD bur in a turbine, with a CVD tip in ultrasound and with an ErCr:YSGG laser. The micro-tensile bond strength (mu TBS) was determined after storage in water for 24 h at 37 degrees C, and morphological evaluation was performed by means of field -emission -gun scanning electron microscopy (Feg-SEM). Results. Feg-SEM evaluation revealed different morphological features on the dentin surface after the usage of both the conventional and alternative techniques for cavity preparation, more specifically regarding smear-layer thickness and surface roughness. CVD bur-cut, CVD ultra-sonoabraded and laser-irradiated dentin resulted in lower mu TBSs than conventionally bur-cut dentin, irrespective of the adhesive employed. Significance. The techniques, such as CVD diamond-bur cutting, CVD diamond ultra-sonoabrasion and laser-irradiation, used for cavity preparation may affect the bonding effectiveness of adhesives to dentin, irrespective of their acidity or approach. (C) 2007 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Influence of Er,Cr : YSGG laser treatment on the microtensile bond strength of adhesives to dentin

Purpose: In light of the concept of minimally invasive dentistry, erbium lasers have been considered as an alternative technique to the use of diamond burs for cavity preparation. The purpose of this study was to assess the bonding effectiveness of adhesives to Er,Cr:YSGG laser-irradiated dentin using irradiation settings specific for cavity preparation. Materials and Methods: Fifty-four midcoronal dentin surfaces, obtained from sound human molars, were irradiated with an Er,Cr:YSGG laser or prepared with a diamond bur using a high-speed turbine. One etch-and-rinse (Optibond FL/Kerr) and three self-etching adhesives (Adper Prompt L-Pop/3M ESPE, Clearfil SE Bond/Kuraray, and Clearfil S-3 Bond/Kuraray) were used to bond the composite to dentin. The microtensile bond strength (mu TBS) was determined after 24 h of storage in water at 37 degrees C. The Kruskal-Wallis test was used to determine pairwise statistical differences (p < 0.05). Prepared dentin surfaces, adhesive interfaces, and failure patterns were analyzed using a stereo microscope and Field-emission gun Scanning Electron Microscopy (Feg-SEM). Results: Significantly lower mu TBS was observed to laser-irradiated than to bur-cut dentin (p < 0.05), irrespective of the adhesive employed. Feg-SEM photomicrographs of lased dentin revealed an imbricate patterned substrate and the presence of microcracks at the dentin surface. Conclusion: Morphological alterations produced by Er,Cr:YSGG laser-irradiation adversely influence the bonding effectiveness of adhesives to dentin. Keywords: dentin, adhesion, adhesives, laser, ErCr:YSGG.

Prevalence and nonrandom distribution of exonic mutations in interferon regulatory factor 6 in 307 families with Van der Woude syndrome and 37 families with popliteal pterygium syndrome

Purpose: Interferon regulatory factor 6 encodes a member of the IRF family of transcription factors. Mutations in interferon regulatory factor 6 cause Van der Woude and popliteal pterygium syndrome, two related orofacial clefting disorders. Here, we compared and contrasted the frequency and distribution of exonic Mutations in interferon regulatory factor 6 between two large geographically distinct collections of families with Van der Woude and between one collection of families with popliteal pterygium syndrome. Methods: We performed direct sequence analysis of interferon regulatory factor 6 exons oil samples from three collections, two with Van der Woude and one with popliteal pterygium syndrome. Results: We identified mutations in interferon regulatory factor 6 exons in 68% of families in both Van der Woude collections and in 97% of families with popliteal pterygium syndrome. In sum, 106 novel disease-causing variants were found. The distribution of mutations in the interferon regulatory factor 6 exons in each collection was not random; exons 3, 4, 7, and 9 accounted for 80%. In the Van der Woude collections, the mutations were evenly divided between protein truncation and missense, whereas most mutations identified in the popliteal pterygium syndrome collection were missense. Further, the missense mutations associated with popliteal pterygium syndrome were localized significantly to exon 4, at residues that are predicted to bind directly to DNA. Conclusion: The nonrandom distribution of mutations in the interferon regulatory factor 6 exons suggests a two-tier approach for efficient mutation screens for interferon regulatory factor 6. The type and distribution of mutations are consistent with the hypothesis that Van der Woude is caused by haploinsufficiency of interferon regulatory factor 6. Oil the other hand, the distribution of popliteal pterygium syndrome-associated mutations suggests a different, though not mutually exclusive, effect oil interferon regulatory factor 6 function. Genet Med 2009:11(4):241-247.

Diagnostisering av elever i geometri : En studie med utgångspunkt i van Hieles teori

Detta är en studie som har sin utgångspunkt i Pierre M. van Hieles teori om lärande i geometri, som presenterades 1986 i boken Structure and Insight. Van Hiele har i boken vidareutvecklat sin och Dina van Hiele-Geldofs ursprungliga lärandeteori från 1955. Vår studie har som syfte att se om van Hieles teori går att tillämpa i en individuell, skriftlig diagnos för att nivåbestämma elever i årskurs 1 på gymnasiet.

Holanda e Van Persie são destaques da primeira rodada da Copa

Na estreia, quinta (12), a disputa entre Brasil e Croácia primeiramente dividiu atenções com os protestos que precederam a partida, realizada em São Paulo, mas após o início do jogo foi a Seleção Brasileira e o seu camisa 10 que passaram a concentrar as menções no Twitter. O resumo da primeira rodada da Copa do Mundo é o resultado do monitoramento realizado pelo Mundial na Rede, uma ferramenta de análise de rede lançada pela Diretoria de Análise de Políticas Públicas da Fundação Getulio Vargas em parceria com a empresa Brandwatch. O Mundial na Rede disponibilizará por um mês, 24 horas por dia, dados e insights atualizados em tempo real sobre o que se fala no Twitter sobre a Copa.

Holanda e Van Persie são destaques da primeira rodada da Copa

Artigo do dia 17 jun. 2014 retirado do Brasil Post, The Huffington Post associado à Abril.

Van Persie supera Messi e Neymar no Twitter

Estudo feito pela FGV com empresa britânica aponta os jogadores mais mencionados na rede social

Etnobiologia do boto cinza (Sotalia guianensis, van Bénéden, 1864) por comunidades pesqueiras do Rio Grande do Norte, Basil

Ethnobiology studies Local Ecological Knowledge (LEK) as well as the use and management of natural resources by local communities in order to understand how the environment is perceived, known and classified by human groups. In fishing communities, LEK adds empirical information about the biology of aquatic species and complements scientific findings, especially when it is difficult to obtain factual information during studies on cetaceans, whose behavior is essentially underwater. Cetaceans (whales and dolphins) are constantly threatened by human activities, especially by accidental capture of small coastal species, as in the case of the estuarine dolphin (Sotalia guianensis), object of this study. Ethnobiological researches in fishing communities are of great importance and can clarify aspects of the biology and conservation of this species. Although extensively studied throughout its distribution range, there are still gaps in the knowledge about S. guianensis. Therefore, fishers local ecological knowledge becomes an additional tool to get and confirm information about S. guianensis. This study evaluated the LEK of artisanal fishers who are daily exposed to local population of S. guianensis, through the use of semistructured interviews (N=116). The interviewed fishers were asked about the biology and popular classification of S. guianensis and about possible interactions between this dolphin and them. The studied communities were located in Tibau do Sul (n=39), Pipa (n=36) and Baía Formosa (n=41), all on the south coast of Rio Grande do Norte, Brazil. The study was based on the assumption that differences in fishers LEK among those communities would be caused by both the variety of fishing environments (lagoon/estuary and ocean) and the intensity of tourism activities. Fishers knowledge is expressive and differed among the studied communities depending on the topic investigated. Fishers correctly reported the habitat, distribution, seasonality and behavioral particularities of S. guianensis. Tourism mainly affected the naming of the species. The study results also suggest that marine fishers have greater knowledge about the species than the estuarine/lagoon ones. Local populations accumulate empirical knowledge according to their environment. Hence, it is important to take into account both empirical knowledge and popular participation in management systems, in order to maintain information sharing among communities