981 resultados para Bank of Maryland, Baltimore.


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Traffic demand increases are pushing aging ground transportation infrastructures to their theoretical capacity. The result of this demand is traffic bottlenecks that are a major cause of delay on urban freeways. In addition, the queues associated with those bottlenecks increase the probability of a crash while adversely affecting environmental measures such as emissions and fuel consumption. With limited resources available for network expansion, traffic professionals have developed active traffic management systems (ATMS) in an attempt to mitigate the negative consequences of traffic bottlenecks. Among these ATMS strategies, variable speed limits (VSL) and ramp metering (RM) have been gaining international interests for their potential to improve safety, mobility, and environmental measures at freeway bottlenecks. Though previous studies have shown the tremendous potential of variable speed limit (VSL) and VSL paired with ramp metering (VSLRM) control, little guidance has been developed to assist decision makers in the planning phase of a congestion mitigation project that is considering VSL or VSLRM control. To address this need, this study has developed a comprehensive decision/deployment support tool for the application of VSL and VSLRM control in recurrently congested environments. The decision tool will assist practitioners in deciding the most appropriate control strategy at a candidate site, which candidate sites have the most potential to benefit from the suggested control strategy, and how to most effectively design the field deployment of the suggested control strategy at each implementation site. To do so, the tool is comprised of three key modules, (1) Decision Module, (2) Benefits Module, and (3) Deployment Guidelines Module. Each module uses commonly known traffic flow and geometric parameters as inputs to statistical models and empirically based procedures to provide guidance on the application of VSL and VSLRM at each candidate site. These models and procedures were developed from the outputs of simulated experiments, calibrated with field data. To demonstrate the application of the tool, a list of real-world candidate sites were selected from the Maryland State Highway Administration Mobility Report. Here, field data from each candidate site was input into the tool to illustrate the step-by-step process required for efficient planning of VSL or VSLRM control. The output of the tool includes the suggested control system at each site, a ranking of the sites based on the expected benefit-to-cost ratio, and guidelines on how to deploy the VSL signs, ramp meters, and detectors at the deployment site(s). This research has the potential to assist traffic engineers in the planning of VSL and VSLRM control, thus enhancing the procedure for allocating limited resources for mobility and safety improvements on highways plagued by recurrent congestion.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Nanocomposite energetics are a relatively new class of materials that combine nanoscale fuels and oxidizers to allow for the rapid release of large amounts of energy. In thermite systems (metal fuel with metal oxide oxidizer), the use of nanomaterials has been illustrated to increase reactivity by multiple orders of magnitude as a result of the higher specific surface area and smaller diffusion length scales. However, the highly dynamic and nanoscale processes intrinsic to these materials, as well as heating rate dependencies, have limited our understanding of the underlying processes that control reaction and propagation. For my dissertation, I have employed a variety of experimental approaches that have allowed me to probe these processes at heating rates representative of free combustion with the goal of understanding the fundamental mechanisms. Dynamic transmission electron microscopy (DTEM) was used to study the in situ morphological change that occurs in nanocomposite thermite materials subjected to rapid (10^11 K/s) heating. Aluminum nanoparticle (Al-NP) aggregates were found to lose their nanostructure through coalescence in as little as 10 ns, which is much faster than any other timescale of combustion. Further study of nanoscale reaction with CuO determined that a condensed phase interfacial reaction could occur within 0.5-5 µs in a manner consistent with bulk reaction, which supports that this mechanism plays a dominant role in the overall reaction process. Ta nanocomposites were also studied to determine if a high melting point (3280 K) affects the loss of nanostructure and rate of reaction. The condensed phase reaction pathway was further explored using reactive multilayers sputter deposited onto thin Pt wires to allow for temperature jump (T-Jump) heating at rates of ~5x10^5 K/s. High speed video and a time of flight mass spectrometry (TOFMS) were used to observe ignition temperature and speciation as a function of bilayer thickness. The ignition process was modeled and a low activation energy for effective diffusivity was determined. T-Jump TOFMS along with constant volume combustion cell studies were also used to determine the effect of gas release in nanoparticle systems by comparing the reaction properties of CuO and Cu2O.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The primary purpose of this quantitative study was to examine middle school administrators’ perceptions of their preparation programs. The following research questions were addressed as a part of the study: 1. What skills, behaviors, and attitudes do middle school principals perceive to be important to be an effective middle school principal? 2. How do middle school principals perceive their level of preparedness in relation to the specific skills, behaviors, and attitudes? 3. To what degree do middle school principals believe that their level of preparation has influenced them to stay in their current role? 4. Which components of their preparation program do middle principals perceive to be the most valuable? 5. To what extent do middle school principals believe that the school district should design a program specifically to develop middle school principals? Middle school principals were selected to participate in this study. Quantitative data were gathered via online questionnaires. The research questions were addressed through analysis of the questionnaire data, using descriptive and inferential statistics. This study resulted in recommendations to provide a framework for the development of a principal preparation program designed to train effective middle school principals.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

From the Founding of the Bank of France to the Present Time

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Asian elephants (Elephas maximus) are critically endangered and live in fragmented populations spread across 13 countries. Yet in comparison to the African savannah elephant (Loxodonta africana), relatively little is known about the social structure of wild Asian elephants because the species is mostly found in low visibility habitat. A better understanding of Asian elephant social structure is critical to mitigate human-elephant conflicts that arise due to increasing human encroachments into elephant habitats. In this dissertation, I examined the social structure of Asian elephants at three sites: Yala, Udawalawe, and Minneriya National Parks in Sri Lanka, where the presence of large open areas and high elephant densities are conducive to behavioral observations. First, I found that the size of groups observed at georeferenced locations was affected by forage availability and distance to water, and the effects of these environmental factors on group size depended on site. Second, I discovered that while populations at different sites differed in the prevalence of weak associations among individuals, a core social structure of individuals sharing strong bonds and organized into highly independent clusters was present across sites. Finally, I showed that the core social structure preserved across sites was typically composed of adult females associating with each other and with other age-sex classes. In addition, I showed that females are social at all life stages, whereas males gradually transition from living in a group to a more solitary lifestyle. Taking into consideration these elements of Asian elephant social structure will help conservation biologists develop effective management strategies that account for both human needs and the socio-ecology of the elephants.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Phase change problems arise in many practical applications such as air-conditioning and refrigeration, thermal energy storage systems and thermal management of electronic devices. The physical phenomenon in such applications are complex and are often difficult to be studied in detail with the help of only experimental techniques. The efforts to improve computational techniques for analyzing two-phase flow problems with phase change are therefore gaining momentum. The development of numerical methods for multiphase flow has been motivated generally by the need to account more accurately for (a) large topological changes such as phase breakup and merging, (b) sharp representation of the interface and its discontinuous properties and (c) accurate and mass conserving motion of the interface. In addition to these considerations, numerical simulation of multiphase flow with phase change introduces additional challenges related to discontinuities in the velocity and the temperature fields. Moreover, the velocity field is no longer divergence free. For phase change problems, the focus of developmental efforts has thus been on numerically attaining a proper conservation of energy across the interface in addition to the accurate treatment of fluxes of mass and momentum conservation as well as the associated interface advection. Among the initial efforts related to the simulation of bubble growth in film boiling applications the work in \cite{Welch1995} was based on the interface tracking method using a moving unstructured mesh. That study considered moderate interfacial deformations. A similar problem was subsequently studied using moving, boundary fitted grids \cite{Son1997}, again for regimes of relatively small topological changes. A hybrid interface tracking method with a moving interface grid overlapping a static Eulerian grid was developed \cite{Juric1998} for the computation of a range of phase change problems including, three-dimensional film boiling \cite{esmaeeli2004computations}, multimode two-dimensional pool boiling \cite{Esmaeeli2004} and film boiling on horizontal cylinders \cite{Esmaeeli2004a}. The handling of interface merging and pinch off however remains a challenge with methods that explicitly track the interface. As large topological changes are crucial for phase change problems, attention has turned in recent years to front capturing methods utilizing implicit interfaces that are more effective in treating complex interface deformations. The VOF (Volume of Fluid) method was adopted in \cite{Welch2000} to simulate the one-dimensional Stefan problem and the two-dimensional film boiling problem. The approach employed a specific model for mass transfer across the interface involving a mass source term within cells containing the interface. This VOF based approach was further coupled with the level set method in \cite{Son1998}, employing a smeared-out Heaviside function to avoid the numerical instability related to the source term. The coupled level set, volume of fluid method and the diffused interface approach was used for film boiling with water and R134a at the near critical pressure condition \cite{Tomar2005}. The effect of superheat and saturation pressure on the frequency of bubble formation were analyzed with this approach. The work in \cite{Gibou2007} used the ghost fluid and the level set methods for phase change simulations. A similar approach was adopted in \cite{Son2008} to study various boiling problems including three-dimensional film boiling on a horizontal cylinder, nucleate boiling in microcavity \cite{lee2010numerical} and flow boiling in a finned microchannel \cite{lee2012direct}. The work in \cite{tanguy2007level} also used the ghost fluid method and proposed an improved algorithm based on enforcing continuity and divergence-free condition for the extended velocity field. The work in \cite{sato2013sharp} employed a multiphase model based on volume fraction with interface sharpening scheme and derived a phase change model based on local interface area and mass flux. Among the front capturing methods, sharp interface methods have been found to be particularly effective both for implementing sharp jumps and for resolving the interfacial velocity field. However, sharp velocity jumps render the solution susceptible to erroneous oscillations in pressure and also lead to spurious interface velocities. To implement phase change, the work in \cite{Hardt2008} employed point mass source terms derived from a physical basis for the evaporating mass flux. To avoid numerical instability, the authors smeared the mass source by solving a pseudo time-step diffusion equation. This measure however led to mass conservation issues due to non-symmetric integration over the distributed mass source region. The problem of spurious pressure oscillations related to point mass sources was also investigated by \cite{Schlottke2008}. Although their method is based on the VOF, the large pressure peaks associated with sharp mass source was observed to be similar to that for the interface tracking method. Such spurious fluctuation in pressure are essentially undesirable because the effect is globally transmitted in incompressible flow. Hence, the pressure field formation due to phase change need to be implemented with greater accuracy than is reported in current literature. The accuracy of interface advection in the presence of interfacial mass flux (mass flux conservation) has been discussed in \cite{tanguy2007level,tanguy2014benchmarks}. The authors found that the method of extending one phase velocity to entire domain suggested by Nguyen et al. in \cite{nguyen2001boundary} suffers from a lack of mass flux conservation when the density difference is high. To improve the solution, the authors impose a divergence-free condition for the extended velocity field by solving a constant coefficient Poisson equation. The approach has shown good results with enclosed bubble or droplet but is not general for more complex flow and requires additional solution of the linear system of equations. In current thesis, an improved approach that addresses both the numerical oscillation of pressure and the spurious interface velocity field is presented by featuring (i) continuous velocity and density fields within a thin interfacial region and (ii) temporal velocity correction steps to avoid unphysical pressure source term. Also I propose a general (iii) mass flux projection correction for improved mass flux conservation. The pressure and the temperature gradient jump condition are treated sharply. A series of one-dimensional and two-dimensional problems are solved to verify the performance of the new algorithm. Two-dimensional and cylindrical film boiling problems are also demonstrated and show good qualitative agreement with the experimental observations and heat transfer correlations. Finally, a study on Taylor bubble flow with heat transfer and phase change in a small vertical tube in axisymmetric coordinates is carried out using the new multiphase, phase change method.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Authentication plays an important role in how we interact with computers, mobile devices, the web, etc. The idea of authentication is to uniquely identify a user before granting access to system privileges. For example, in recent years more corporate information and applications have been accessible via the Internet and Intranet. Many employees are working from remote locations and need access to secure corporate files. During this time, it is possible for malicious or unauthorized users to gain access to the system. For this reason, it is logical to have some mechanism in place to detect whether the logged-in user is the same user in control of the user's session. Therefore, highly secure authentication methods must be used. We posit that each of us is unique in our use of computer systems. It is this uniqueness that is leveraged to "continuously authenticate users" while they use web software. To monitor user behavior, n-gram models are used to capture user interactions with web-based software. This statistical language model essentially captures sequences and sub-sequences of user actions, their orderings, and temporal relationships that make them unique by providing a model of how each user typically behaves. Users are then continuously monitored during software operations. Large deviations from "normal behavior" can possibly indicate malicious or unintended behavior. This approach is implemented in a system called Intruder Detector (ID) that models user actions as embodied in web logs generated in response to a user's actions. User identification through web logs is cost-effective and non-intrusive. We perform experiments on a large fielded system with web logs of approximately 4000 users. For these experiments, we use two classification techniques; binary and multi-class classification. We evaluate model-specific differences of user behavior based on coarse-grain (i.e., role) and fine-grain (i.e., individual) analysis. A specific set of metrics are used to provide valuable insight into how each model performs. Intruder Detector achieves accurate results when identifying legitimate users and user types. This tool is also able to detect outliers in role-based user behavior with optimal performance. In addition to web applications, this continuous monitoring technique can be used with other user-based systems such as mobile devices and the analysis of network traffic.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

New methods of nuclear fuel and cladding characterization must be developed and implemented to enhance the safety and reliability of nuclear power plants. One class of such advanced methods is aimed at the characterization of fuel performance by performing minimally intrusive in-core, real time measurements on nuclear fuel on the nanometer scale. Nuclear power plants depend on instrumentation and control systems for monitoring, control and protection. Traditionally, methods for fuel characterization under irradiation are performed using a “cook and look” method. These methods are very expensive and labor-intensive since they require removal, inspection and return of irradiated samples for each measurement. Such fuel cladding inspection methods investigate oxide layer thickness, wear, dimensional changes, ovality, nuclear fuel growth and nuclear fuel defect identification. These methods are also not suitable for all commercial nuclear power applications as they are not always available to the operator when needed. Additionally, such techniques often provide limited data and may exacerbate the phenomena being investigated. This thesis investigates a novel, nanostructured sensor based on a photonic crystal design that is implemented in a nuclear reactor environment. The aim of this work is to produce an in-situ radiation-tolerant sensor capable of measuring the deformation of a nuclear material during nuclear reactor operations. The sensor was fabricated on the surface of nuclear reactor materials (specifically, steel and zirconium based alloys). Charged-particle and mixed-field irradiations were both performed on a newly-developed “pelletron” beamline at Idaho State University's Research and Innovation in Science and Engineering (RISE) complex and at the University of Maryland's 250 kW Training Reactor (MUTR). The sensors were irradiated to 6 different fluences (ranging from 1 to 100 dpa), followed by intensive characterization using focused ion beam (FIB), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) to investigate the physical deformation and microstructural changes between different fluence levels, to provide high-resolution information regarding the material performance. Computer modeling (SRIM/TRIM) was employed to simulate damage to the sensor as well as to provide significant information concerning the penetration depth of the ions into the material.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Understanding how biodiversity spatially distribute over both the short term and long term, and what factors are affecting the distribution, are critical for modeling the spatial pattern of biodiversity as well as for promoting effective conservation planning and practices. This dissertation aims to examine factors that influence short-term and long-term avian distribution from the geographical sciences perspective. The research develops landscape level habitat metrics to characterize forest height heterogeneity and examines their efficacies in modelling avian richness at the continental scale. Two types of novel vegetation-height-structured habitat metrics are created based on second order texture algorithms and the concepts of patch-based habitat metrics. I correlate the height-structured metrics with the richness of different forest guilds, and also examine their efficacies in multivariate richness models. The results suggest that height heterogeneity, beyond canopy height alone, supplements habitat characterization and richness models of two forest bird guilds. The metrics and models derived in this study demonstrate practical examples of utilizing three-dimensional vegetation data for improved characterization of spatial patterns in species richness. The second and the third projects focus on analyzing centroids of avian distributions, and testing hypotheses regarding the direction and speed of these shifts. I first showcase the usefulness of centroids analysis for characterizing the distribution changes of a few case study species. Applying the centroid method on 57 permanent resident bird species, I show that multi-directional distribution shifts occurred in large number of studied species. I also demonstrate, plain birds are not shifting their distribution faster than mountain birds, contrary to the prediction based on climate change velocity hypothesis. By modelling the abundance change rate at regional level, I show that extreme climate events and precipitation measures associate closely with some of the long-term distribution shifts. This dissertation improves our understanding on bird habitat characterization for species richness modelling, and expands our knowledge on how avian populations shifted their ranges in North America responding to changing environments in the past four decades. The results provide an important scientific foundation for more accurate predictive species distribution modeling in future.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The attitude of school teachers toward inclusion of children with disabilities is an important factor in the successful implementation of a national inclusion program. With the universal pressure to provide education for all and international recognition of the importance of meeting the needs of diverse populations, inclusive education has become important to governments around the world. El Salvador’s Ministry of Education seeks to establish inclusion as an integral part of their struggle to meet the needs of children across the country, but this is a difficult process, especially for a country with limited resources which still struggles to meet international expectations of educational access and quality. Teacher attitude is an important factor in the success of inclusion programs and can be investigated in relation to various factors which may affect teachers’ classroom practice. While these factors have been investigated in multiple countries, there is a need for more knowledge of the present situation in developing countries and especially in schools across the rural areas of El Salvador to meet the needs of the diverse learners in that country. My research was a mixed methods case study of the rural schools of one municipality, using a published survey and interviews with teachers to investigate their attitudes regarding inclusion. This research was the first investigation of teachers’ attitudes toward inclusion in rural El Salvador and explored the needs and challenges which exist in creating inclusive schools across this country. The findings of this study revealed the following important themes. Some children with disabilities are not in school and those with mild disabilities are not always getting needed services. Teachers agreed with the philosophy of inclusion, but believed that some children with disabilities would receive a better education in special schools. They were not concerned about classroom management. Teachers desired more training on disability and inclusion. They believed that a lack of resources, including materials and personnel, was a major barrier to inclusion. Teachers’ attitudes were consistent regardless of family and professional experience with disability or amount of inclusion training. They were concerned about the role of family support for children with disabilities.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In the last two decades, experimental progress in controlling cold atoms and ions now allows us to manipulate fragile quantum systems with an unprecedented degree of precision. This has been made possible by the ability to isolate small ensembles of atoms and ions from noisy environments, creating truly closed quantum systems which decouple from dissipative channels. However in recent years, several proposals have considered the possibility of harnessing dissipation in open systems, not only to cool degenerate gases to currently unattainable temperatures, but also to engineer a variety of interesting many-body states. This thesis will describe progress made towards building a degenerate gas apparatus that will soon be capable of realizing these proposals. An ultracold gas of ytterbium atoms, trapped by a species-selective lattice will be immersed into a Bose-Einstein condensate (BEC) of rubidium atoms which will act as a bath. Here we describe the challenges encountered in making a degenerate mixture of rubidium and ytterbium atoms and present two experiments performed on the path to creating a controllable open quantum system. The first experiment will describe the measurement of a tune-out wavelength where the light shift of $\Rb{87}$ vanishes. This wavelength was used to create a species-selective trap for ytterbium atoms. Furthermore, the measurement of this wavelength allowed us to extract the dipole matrix element of the $5s \rightarrow 6p$ transition in $\Rb{87}$ with an extraordinary degree of precision. Our method to extract matrix elements has found use in atomic clocks where precise knowledge of transition strengths is necessary to account for minute blackbody radiation shifts. The second experiment will present the first realization of a degenerate Bose-Fermi mixture of rubidium and ytterbium atoms. Using a three-color optical dipole trap (ODT), we were able to create a highly-tunable, species-selective potential for rubidium and ytterbium atoms which allowed us to use $\Rb{87}$ to sympathetically cool $\Yb{171}$ to degeneracy with minimal loss. This mixture is the first milestone creating the lattice-bath system and will soon be used to implement novel cooling schemes and explore the rich physics of dissipation.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Human malaria is responsible for over 700,000 deaths a year. To stay abreast of the threat posed by the parasite, a constant stream of new drugs and vector control methods are required. This study focuses on a vaccine that has the potential to protect against parasite infection, but has been hindered by developmental challenges. In malaria prevention, live, attenuated, aseptic, Plasmodium falciparum sporozoites (PfSPZ) can be administered as a highly protective vaccine. PfSPZ are produced using adult female Anopheles stephensi mosquitoes as bioreactors. Production volume and cost of a PfSPZ vaccine for malaria are expected to be directly correlated with Plasmodium falciparum infection intensity in the salivary glands. The sporogonic development of Plasmodium falciparum in A. stephensi to fully infected salivary gland stage sporozoites is dictated by the activities of several known components of the mosquito’s innate immune system. Here I report on the use of genetic technologies that have been rarely, if ever, used in Anopheles stephensi Sda500 to increase the yield of sporozoites per mosquito and enhance vaccine production. By combining the Gal4/UAS bipartite system with in vivo expression of shRNA gene silencing, activity of the IMD signaling pathway downstream effector LRIM1, an antagonist to Plasmodium development, was reduced in the midgut, fat body, and salivary glands of A. stephensi. In infection studies using P. berghei and P. falciparum these transgenic mosquitoes consistently produced significantly more salivary gland stage sporozoites than wildtype controls, with increases in P. falciparum ranging from 2.5 to 10 fold. Using Plasmodium infection assays and qRT-PCR, two novel findings were identified. First, it was shown that 14 days post Plasmodium infection, transcript abundance of the IMD immune effector genes LRIM1, TEP1 and APL1c are elevated, in the salivary glands of A. stephensi, suggesting the salivary glands may play a role in post midgut defense against the parasite. Second, a non-pathogenic IMD signaling pathway response was observed which could suggest an alternative pathway for IMD activation. The information gained from these studies has significantly increased our knowledge of Plasmodium defense in A. stephensi and moreover could significantly improve vaccine production.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Valveless pulsejets are extremely simple aircraft engines; essentially cleverly designed tubes with no moving parts. These engines utilize pressure waves, instead of machinery, for thrust generation, and have demonstrated thrust-to-weight ratios over 8 and thrust specific fuel consumption levels below 1 lbm/lbf-hr – performance levels that can rival many gas turbines. Despite their simplicity and competitive performance, they have not seen widespread application due to extremely high noise and vibration levels, which have persisted as an unresolved challenge primarily due to a lack of fundamental insight into the operation of these engines. This thesis develops two theories for pulsejet operation (both based on electro-acoustic analogies) that predict measurements better than any previous theory reported in the literature, and then uses them to devise and experimentally validate effective noise reduction strategies. The first theory analyzes valveless pulsejets as acoustic ducts with axially varying area and temperature. An electro-acoustic analogy is used to calculate longitudinal mode frequencies and shapes for prescribed area and temperature distributions inside an engine. Predicted operating frequencies match experimental values to within 6% with the use of appropriate end corrections. Mode shapes are predicted and used to develop strategies for suppressing higher modes that are responsible for much of the perceived noise. These strategies are verified experimentally and via comparison to existing models/data for valveless pulsejets in the literature. The second theory analyzes valveless pulsejets as acoustic systems/circuits in which each engine component is represented by an acoustic impedance. These are assembled to form an equivalent circuit for the engine that is solved to find the frequency response. The theory is used to predict the behavior of two interacting pulsejet engines. It is validated via comparison to experiment and data in the literature. The technique is then used to develop and experimentally verify a method for operating two engines in anti-phase without interfering with thrust production. Finally, Helmholtz resonators are used to suppress higher order modes that inhibit noise suppression via anti-phasing. Experiments show that the acoustic output of two resonator-equipped pulsejets operating in anti-phase is 9 dBA less than the acoustic output of a single pulsejet.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

What if the architectural process of making could incorporate time? All designers who impact the physical environment- consciously and unconsciously are gatekeepers of the past, commentators of the present, and speculators of the future. This project proposes the creation of architecture and adaptive public space that looks to historical memories, foster present day cultural formation, and new alternative visions for the city of the future. The thesis asks what it means to design for stasis and change in a variety of scales- urban, architectural, and detail and arrives at a speculated new neighborhood, institutional buildings, and landscape. Central to this project is the idea of the architect as archeologist, anthropologist, and artist. The project focuses on a rapidly changing part of the city of Fort Worth, Texas and assigns a multipurpose institutional buildings and public space as a method of investigation. The thesis hopes to further architectural discourse about into the role of architecture in the preservation of memory, adaptive potential of public spaces, and the role of time in architecture.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This dissertation examines the price sensitivity of demand for higher education among non-traditional students in the United States. Chapter 1 discusses the issues related to the demand for higher education. It presents the recent trends and reviews the literature addressing these issues. A major conclusion that emerges from this chapter is that the price sensitivity of demand for higher education appears to depend on the source of the variation in price and the characteristics of the students who face the price change. The baseline estimate for the price sensitivity of demand is that a $1,000 (in year 2000 dollars) decrease in tuition costs should result in a 4 percentage-point increase in enrollment for the traditional 18- to 24-year-old student. Chapter 2 examines the price sensitivity of demand for higher education for military spouses resulting from variation in tuition due to military-mandated moves across states. The data suggest that a $1,000 (in year 2000 dollars) decrease in the cost of 2-year schools is associated with a 1--1.5 percentage-point increase in the probability of attending college. This estimate is less than half the previous estimates due to in-state tuition price differences faced by the civilian 18- to 24-year-old population on a percentage-point basis. However, this represents a 7--10 percent increase for this population, and the magnitude of this metric is in line with previous estimates. This suggests tuition assistance can be an effective means of increasing enrollment for military spouses, but other barriers to education for this population may also need to be addressed. Chapter 3 examines the impact of a change in the tax treatment of savings set aside for higher education by those who decide to suspend their education and enter the workforce. The taxation of these funds appears to have increased the rate at which these funds are included in an employee's initial contract and the quantity of funds allocated. These results are counterintuitive if the tax preference was the primary reason for the savings plan. However, these results suggest the rationale for the savings plan was to offer targeted additional compensation to recruits with greater negotiating power. Taxation of funds previously set aside did not appear to have a statistically significant impact on their utilization. Point estimates of the price sensitivity of demand from changes in the out-of-pocket costs for higher education induced by the taxation of these funds were small and often not statistically significant. The results from this dissertation show responses to changes in the net cost of college that differ by the source of price variation and the population experiencing them. This is consistent with the previous literature. This dissertation contributes to the literature by providing estimates for the price sensitivity of demand for higher education to previously understudied non-traditional students.