Mass transfer properties (permeability and mass diffusivity) of four Australian hardwood species

Characterisation of mass transfer properties was achieved in the longitudinal, radial, and tangential directions for four Australian hardwood species: spotted gum, blackbutt, jarrah and messmate. Measurement of mass transfer properties for these species was necessary to complement current vacuum drying modelling research. Water-vapour diffusivity was determined in steady state using a specific vapometer. Permeability values of some species and material directions were extremely low and undetectable by the mass flow meter device. Hence, a custom system based on volume evolution was conceived to determine very low, previously unpublished, wood permeability values. Mass diffusivity and permeability were lowest for spotted gum and highest for messmate. Except for messmate, in the radial direction, the four species measured were less permeable in all directions than the lowest published figures, demonstrating the high impermeability of Australian hardwoods and partly accounting for their relatively slow drying rates. Premeability, water-vapour diffusivity, and associated anisotropic ratio data obtained for messmate were extreme or did not follow typical trends and is consequently the most difficult of the four woods to dry in terms of collapse and checkinng degradation.

Association study of the dystrobrevin-binding gene with schizophrenia in Australian and Indian samples

Numerous studies have reported association between variants in the dystrobrevin binding protein 1 (dysbindin) gene (DTNBP1) and schizophrenia. However, the pattern of results is complex and to date, no specific risk marker or haplotype has been consistently identified. The number of single nucleotide polymorphisms (SNPs) tested in these studies has ranged from 5 to 20. We attempted to replicate previous findings by testing 16 SNPs in samples of 41 Australian pedigrees, 194 Australian cases and 180 controls, and 197 Indian pedigrees. No globally significant evidence for association was observed in any sample, despite power calculations indicating sufficient power to replicate several previous findings. Possible explanations for our results include sample differences in background linkage disequilibrium and/or risk allele effect size, the presence of multiple risk alleles upon different haplotypes, or the presence of a single risk allele upon multiple haplotypes. Some previous associations may also represent false positives. Examination of Caucasian HapMap phase II genotype data spanning the DTNBP1 region indicates upwards of 40 SNPs are required to satisfactorily assess all nonredundant variation within DTNBP1 and its potential regulatory regions for association with schizophrenia. More comprehensive studies in multiple samples will be required to determine whether specific DTNBP1 variants function as risk factors for schizophrenia.

Embedding Indigenous knowledges: An Australian case study of urban and remote teaching practicum

In this chapter we propose that there are certain conditions that enable the agency of pre-service teachers to enact curriculum decision-making within their pedagogical relationships with their supervising teachers as they endeavour to embed Indigenous knowledges (IK) during the teaching practicum. The case study, underpinned by decolonising methodologies, centred upon pre-service teacher preparation at one Australian university, where we investigated how role modelling in urban and remote schools occurred in the learning and teaching relationships between pre-service teachers on practicum and their supervising teachers. This chapter draws from an Office of Learning and Teaching (OLT) sponsored project at one Australian university; a full report on this project has been documented (see McLaughlin, Whatman and Nielsen, 2014). We commence with a discussion of decolonising and critical pedagogical spaces as the conceptual framework for the embedding Indigenous knowledges and perspectives in curricula and pedagogy. Our focus then shifts to a contextual overview of the development of Indigenous Knowledges (IK) in Australian school and university curriculum, providing a standpoint from which to consider the unfolding case study.

Ecology, Behaviour and Control of Apis cerana with a Focus on Relevance to the Australian Incursion

Apis cerana Fabricius is endemic to most of Asia, where it has been used for honey production and pollination services for thousands of years. Since the 1980s, A. cerana has been introduced to areas outside its natural range (namely New Guinea, the Solomon Islands, and Australia), which sparked fears that it may become a pest species that could compete with, and negatively affect, native Australian fauna and flora, as well as commercially kept A. mellifera and commercial crops. This literature review is a response to these concerns and reviews what is known about the ecology and behaviour of A. cerana. Differences between temperate and tropical strains of A. cerana are reviewed, as are A. cerana pollination, competition between A. cerana and A. mellifera, and the impact and control strategies of introduced A. cerana, with a particular focus on gaps of current knowledge.

Methane in Australian agriculture: current emissions, sources and sinks, and potential mitigation strategies

Methane is a potent greenhouse gas with a global warming potential ∼28 times that of carbon dioxide. Consequently, sources and sinks that influence the concentration of methane in the atmosphere are of great interest. In Australia, agriculture is the primary source of anthropogenic methane emissions (60.4% of national emissions, or 3260kt-1methaneyear-1, between 1990 and 2011), and cropping and grazing soils represent Australia's largest potential terrestrial methane sink. As of 2011, the expansion of agricultural soils, which are ∼70% less efficient at consuming methane than undisturbed soils, to 59% of Australia's land mass (456Mha) and increasing livestock densities in northern Australia suggest negative implications for national methane flux. Plant biomass burning does not appear to have long-term negative effects on methane flux unless soils are converted for agricultural purposes. Rice cultivation contributes marginally to national methane emissions and this fluctuates depending on water availability. Significant available research into biological, geochemical and agronomic factors has been pertinent for developing effective methane mitigation strategies. We discuss methane-flux feedback mechanisms in relation to climate change drivers such as temperature, atmospheric carbon dioxide and methane concentrations, precipitation and extreme weather events. Future research should focus on quantifying the role of Australian cropping and grazing soils as methane sinks in the national methane budget, linking biodiversity and activity of methane-cycling microbes to environmental factors, and quantifying how a combination of climate change drivers will affect total methane flux in these systems.

Online identification guides for Australian smut fungi (Ustilaginomycotina) and rust fungi (Pucciniales)

Interactive identification keys for Australian smut fungi (Ustilaginomycotina and Pucciniomycotina, Microbotryales) and rust fungi (Pucciniomycotina, Pucciniales) are available online at http://collections.daff.qld.gov.au. The keys were built using Lucid software, and facilitate the identification of all known Australian smut fungi (317 species in 37 genera) and 100 rust fungi (from approximately 360 species in 37 genera). The smut and rust keys are illustrated with over 1,600 and 570 images respectively. The keys are designed to assist a wide range of end-users including mycologists, plant health diagnosticians, biosecurity scientists, plant pathologists, and university students. The keys are dynamic and will be regularly updated to include taxonomic changes and incorporate new detections, taxa, distributions and images. Researchers working with Australian smut and rust fungi are encouraged to participate in the on-going development and improvement of these keys.

A role to play: Investigating concepts of masculinity in Australia through theatre

Health professionals, academics, social commentators and the media are increasingly sending the same message – Australian men are in crisis. This message has been supported by documented rises in alcoholism, violence, depression, suicide and crime amongst men in Australia. A major cause of this crisis, it can be argued, is an over-reliance on the out-dated and limited model of hegemonic masculinity that all men are encouraged to imitate in their own behaviour. This paper, as part of a larger study, explores representations of masculinity in selected works of contemporary Australian theatre in order to investigate the concept of hegemonic masculinity and any influence it may have on the perceived ‘crisis of masculinity’. Theatre is but one of the artistic modes that can be used to investigate masculinity and issues associated with identity. The Australia Council for the Arts recognises theatre, along with literature, dance, film, television, inter-arts, music and visual arts, as critical to the understanding and expression of Australian culture and identity. Theatre has been chosen in this instance because of the opportunities available to this study for direct access to specific theatre performances and creators and, also, because of the researcher’s experience, as a theatre director, with the dramatic arts. Through interviews with writers, directors and actors, combined with the analysis of scripts, academic writings, reviews, articles, programmes, play rehearsals and workshops, this research utilises theatre as a medium to explore masculinity in Australia.

Valence and spatial explanations for voting in the 2013 Australian election

This paper examines the 2013 Australian federal election to test two competing models of vote choice: spatial politics and valence issues. Using data from the 2013 Australian Election Study, the analysis finds that spatial politics (measured by party identification and self-placement on the left-right spectrum) and valence issues both have significant effects on vote choice. However, spatial measures are more important than valence issues in explaining vote choice, in contrast with recent studies from Britain, Canada and the United States. Explanations for these differences are speculative, but may relate to Australia’s stable party and electoral system, including compulsory voting and the frequency of elections. The consequently high information burden faced by Australian voters may lead to a greater reliance on spatial heuristics than is found elsewhere.

Child abuse and neglect: A socio-legal study of mandatory reporting in Australia - Report for the Australian Government

This report presents the results of a national study exploring the law and practice of mandatory reporting of child abuse and neglect. Government administrative data over a decade (2003-2012) were accessed and analysed to map trends in reporting of different types of child abuse and neglect (physical abuse, sexual abuse, emotional abuse, and neglect) by different reporter groups (both mandated reporters e.g., police, teachers, doctors, nurses depending on the jurisdiction, and non-mandated reporters e.g., family members, neighbours, depending on the jurisdiction), and the outcomes of these reports (whether investigated, and whether substantiated or not). The study was funded by the Australian Government and administered through the Government of Victoria.

Child Abuse and Neglect: A Socio-legal Study of Mandatory Reporting in Australia - Report for the South Australian Government

This report presents the results of a study exploring the law and practice of mandatory reporting of child abuse and neglect in South Australia. Government administrative data over a decade (2003-2012) were accessed and analysed to map trends in reporting of different types of child abuse and neglect (physical abuse, sexual abuse, emotional abuse, and neglect) by different reporter groups (both mandated reporters e.g., police, teachers, doctors, nurses; and non-mandated reporters e.g., family members, neighbours), and the outcomes of these reports (whether investigated, and whether substantiated or not). The study was funded by the Australian Government and administered through the Government of Victoria.

Child Abuse and Neglect: A Socio-legal Study of Mandatory Reporting in Australia - Report for the West Australian Government

This report presents the results of a study exploring the law and practice of mandatory reporting of child abuse and neglect in Western Australia. Government administrative data over a decade (2003-2012) were accessed and analysed to map trends in reporting of different types of child abuse and neglect (physical abuse, sexual abuse, emotional abuse, and neglect) by different reporter groups (e.g., police, teachers, doctors, nurses, family members, neighbours), and the outcomes of these reports (whether investigated, and whether substantiated or not). The study was funded by the Australian Government and administered through the Government of Victoria.

Introduction: Reviewing Australian screen history

This special issue of Studies in Australasian Cinema features a selection of papers presented at the 17th Film and History Association of Australia and New Zealand (FHAANZ) conference, held at Queensland University of Technology between 1 and 3 July 2015. This was the first FHAANZ conference to be hosted in Queensland since 1998. Informed by historical and archival research, the articles examine overlooked or underdeveloped aspects of screen history, offer new historical perspectives, or consider key contemporary issues regarding the preservation of Australian screen history.

Monsoon Regimes and Processes in CCSM4. Part I: The Asian-Australian Monsoon

The simulation characteristics of the Asian-Australian monsoon are documented for the Community Climate System Model, version 4 (CCSM4). This is the first part of a two part series examining monsoon regimes in the global tropics in the CCSM4. Comparisons are made to an Atmospheric Model Intercomparison Project (AMIP) simulation of the atmospheric component in CCSM4 Community Atmosphere Model, version 4, (CAM4)] to deduce differences in the monsoon simulations run with observed sea surface temperatures (SSTs) and with ocean-atmosphere coupling. These simulations are also compared to a previous version of the model (CCSM3) to evaluate progress. In general, monsoon rainfall is too heavy in the uncoupled AMIP run with CAM4, and monsoon rainfall amounts are generally better simulated with ocean coupling in CCSM4. Most aspects of the Asian-Australian monsoon simulations are improved in CCSM4 compared to CCSM3. There is a reduction of the systematic error of rainfall over the tropical Indian Ocean for the South Asian monsoon, and well-simulated connections between SSTs in the Bay of Bengal and regional South Asian monsoon precipitation. The pattern of rainfall in the Australian monsoon is closer to observations in part because of contributions from the improvements of the Indonesian Throughflow and diapycnal diffusion in CCSM4. Intraseasonal variability of the Asian-Australian monsoon is much improved in CCSM4 compared to CCSM3 both in terms of eastward and northward propagation characteristics, though it is still somewhat weaker than observed. An improved simulation of El Nino in CCSM4 contributes to more realistic connections between the Asian-Australian monsoon and El Nino-Southern Oscillation (ENSO), though there is considerable decadal and century time scale variability of the strength of the monsoon-ENSO connection.

Specroelectrochemical, Switching Kinetics, and Chronoamperometric Studies of Dibenzyl Derivative of Poly(3,4-propylenedioxythiophene) Thin-Film-Based Electrochromic Device

The dibenzyl derivative of poly(3,4-propylenedioxythiophene) (PProDOT-Bz(2)) thin film is deposited onto ITO-coated glass substrate by electropolymerization technique. The electropolymerization of ProDOT-Bz(2) is carried out by a three-electrode electrochemical cell. The cyclic voltammogram shows the redox properties of electrochemically prepared films deposited at different scan rates. The thin films prepared were characterized for its morphological properties to study the homogeniety. Classic six-layer structure of PProDOT-Bz(2) electrochromic device using this material was fabricated and reported for the first and its characterizations such as spectroelectrochemical, switching kinetics, and chronoamperometric studies are performed. The color contrast of the thin film and the device achieved are 64 and 40%, respectively, at lambda(max) (628 nm). The switching time is recorded and the observed values are 5 s from the coloring state to the bleaching state and vice versa. The chronoamperometry shows that the device performed up to 400 cycles, and it is capable of working up to 35 cycles without any degradation. (C) 2014 Wiley Periodicals, Inc.

Influences of Hydration Force and Elastic Strain Energy on the Stability of Solid Film in a Very Thin Solid-on-Liquid Structure

Since hydration forces become very strong at short range and are particularly important for determining the magnitude of the adhesion between two surfaces or interaction energy, the influences of the hydration force and elastic strain energy due to hydration-induced layering of liquid molecules close to a solid film surface on the stability of a solid film in a solid-on-liquid (SOL) nanostructure are studied in this paper. The liquid of this thin SOL structure is a kind of water solution. Since the surface forces play an important role in the structure, the total free energy change of SOL structures consists of the changes in the bulk elastic energy within the solid film, the surface energy at the solid-liquid interface and the solid-air interface, and highly nonlinear volumetric component associated with interfacial forces. The critical wavelength of one-dimensional undulation, the critical thickness of the solid film, and the critical thickness of the liquid layer are studied, and the stability regions of the solid film have been determined. Emphasis is placed on calculation of critical values, which are the basis of analyzing the stability of the very thin solid film.