Production of magnesium carbonates from serpentinites for CO2 mineral sequestration : optimisation towards industrial application

Global warming is one of the most alarming problems of this century. Initial scepticism concerning its validity is currently dwarfed by the intensification of extreme weather events whilst the gradual arising level of anthropogenic CO2 is pointed out as its main driver. Most of the greenhouse gas (GHG) emissions come from large point sources (heat and power production and industrial processes) and the continued use of fossil fuels requires quick and effective measures to meet the world’s energy demand whilst (at least) stabilizing CO2 atmospheric levels. The framework known as Carbon Capture and Storage (CCS) – or Carbon Capture Utilization and Storage (CCUS) – comprises a portfolio of technologies applicable to large‐scale GHG sources for preventing CO2 from entering the atmosphere. Amongst them, CO2 capture and mineralisation (CCM) presents the highest potential for CO2 sequestration as the predicted carbon storage capacity (as mineral carbonates) far exceeds the estimated levels of the worldwide identified fossil fuel reserves. The work presented in this thesis aims at taking a step forward to the deployment of an energy/cost effective process for simultaneous capture and storage of CO2 in the form of thermodynamically stable and environmentally friendly solid carbonates. R&D work on the process considered here began in 2007 at Åbo Akademi University in Finland. It involves the processing of magnesium silicate minerals with recyclable ammonium salts for extraction of magnesium at ambient pressure and 400‐440⁰C, followed by aqueous precipitation of magnesium in the form of hydroxide, Mg(OH)2, and finally Mg(OH)2 carbonation in a pressurised fluidized bed reactor at ~510⁰C and ~20 bar PCO2 to produce high purity MgCO3. Rock material taken from the Hitura nickel mine, Finland, and serpentinite collected from Bragança, Portugal, were tested for magnesium extraction with both ammonium sulphate and bisulphate (AS and ABS) for determination of optimal operation parameters, primarily: reaction time, reactor type and presence of moisture. Typical efficiencies range from 50 to 80% of magnesium extraction at 350‐450⁰C. In general ABS performs better than AS showing comparable efficiencies at lower temperature and reaction times. The best experimental results so far obtained include 80% magnesium extraction with ABS at 450⁰C in a laboratory scale rotary kiln and 70% Mg(OH)2 carbonation in the PFB at 500⁰C, 20 bar CO2 pressure for 15 minutes. The extraction reaction with ammonium salts is not at all selective towards magnesium. Other elements like iron, nickel, chromium, copper, etc., are also co‐extracted. Their separation, recovery and valorisation are addressed as well and found to be of great importance. The assessment of the exergetic performance of the process was carried out using Aspen Plus® software and pinch analysis technology. The choice of fluxing agent and its recovery method have a decisive sway in the performance of the process: AS is recovered by crystallisation and in general the whole process requires more exergy (2.48–5.09 GJ/tCO2sequestered) than ABS (2.48–4.47 GJ/tCO2sequestered) when ABS is recovered by thermal decomposition. However, the corrosive nature of molten ABS and operational problems inherent to thermal regeneration of ABS prohibit this route. Regeneration of ABS through addition of H2SO4 to AS (followed by crystallisation) results in an overall negative exergy balance (mainly at the expense of low grade heat) but will flood the system with sulphates. Although the ÅA route is still energy intensive, its performance is comparable to conventional CO2 capture methods using alkanolamine solvents. An energy‐neutral process is dependent on the availability and quality of nearby waste heat and economic viability might be achieved with: magnesium extraction and carbonation levels ≥ 90%, the processing of CO2‐containing flue gases (eliminating the expensive capture step) and production of marketable products.

Improve the production capacity: A case study of Eurofins Viljavuuspalvelu Oy

In any manufacturing system, there are many factors that are affecting and limiting the capacity of the entire system. This thesis addressed a study on how to improve the production capacity in a Finnish company (Viljavuuspalvelu Oy) through different methods like bottleneck analysis, Overall Equipment Effectiveness (OEE), and Just in Time production. Four analyzing methods have been studied in order to detect the bottleneck machine in Viljavuuspalvelu Oy. The results shows that the bottleneck machine in the industrial area that constraint the production is the grinding machine while the bottleneck machine in the laboratory section is the photometry machine. In addition, the Overall Equipment Effectiveness (OEE) of the entire system of the studied case was calculated and it has been found that the OEE of the Viljavuuspalvelu Oy is 35.75%. Moreover, two methods on how to increase the OEE were studied and it was shown that either the total output of the company should be 1254 samples/shift in order to have an OEE around 85% which is considered as a world class or the Ideal run rate should be 1.45 pieces/minute. In addition, some realistic methods are applied based on the finding in this thesis to increase the OEE factor in the company and in one realistic method the % OEE has increase to 62.59%. Finally, an explanation on how to implement the Just in Time production in Viljavuuspalvelu Oy has been studied.

Public management, policy capacity, innovation and development

In this paper we discuss the question of what factors in development policy create specific forms of policy capacity and under what circumstances developmentoriented complementarities or mismatches between the public and private sectors emerge. We argue that specific forms of policy capacity emerge from three interlinked policy choices, each fundamentally evolutionary in nature: policy choices on understanding the nature and sources of technical change and innovation; on the ways of financing economic growth, in particular technical change; and on the nature of public management to deliver and implement both previous sets of policy choices. Thus, policy capacity is not so much a continuum of abilities (from less to more), but rather a variety of modes of making policy that originate from co-evolutionary processes in capitalist development. To illustrate, we briefly reflect upon how the East Asian developmental states of the 1960s-1980s and Eastern European transition policies since the 1990s led to almost opposite institutional systems for financing, designing and managing development strategies, and how this led, through co-evolutionary processes, to different forms of policy capacity.

Capacity and transformational development within the 2005 Canada Summer Games host society

Although capacity has been used in recent federal government accords and policies related to the voluntary and amateur sport sectors, there is little consensus over the meaning of the term. Consequently, the purpose of this qualitative case study was to explore the concept of organizational capacity within a temporary voluntary sport organization. Specifically, the nature of organizational capacity was examined within the case of the Volunteers Division of the 2005 Canada Summer Games (CSG) Host Society. Data were collected from executive planning and middle management CSG volunteers through the use of a variety of methods: verbal journals, interviews, observations, documents and a focus group. Findings indicated several challenges associated with the volunteer management model utilized by the host society, varying levels of importance among six elements of capacity, and key aspects of the relationship between organizational capacity and transformational development. Implications focused upon the importance of highlighting individuals rather than the organizational as a whole in order to build capacity, and utilizing a brain or hybrid brain-machine organizational form to enhance capacity. Recommendations are provided for both the Canada Games Council and Canada Games host societies.

Drift dispersal in central Southern Ontario /

Two tills are readily identi-f i able in central Southern Ontario, a very stony, loose deposit o-f variable matrix (Dummer till) and a moderately stony, fissile and compact deposit that is more homogeneous (drumlinized till). The quantity o-f Precambr i an, Paleozoic and Shadow Lake Formation (Paleozoic) rock types were determined and corresponding isopleth maps drawn. The changes in lithology content occurred in the direction o-f transport, there-fore, compositional isopleths o-f till may be considered equipotential lines for the reconstruction of glacier flow paths. Areal gradations of drift lithology indicated that the prime agents of dispersal were ice and glacial meltwaters. The down-ice abundance trend of till components indicated a dispersal pattern showing the concentration of a given lithology type peaking within a few kilometres of the source followed by a rapid decline and thereafter, a more gradual decrease with increasing distance. Within the esker deposits, igneous rocks may form the major component and can extend further onto the limestone plain than in the adjacent till. Evidence is presented that indicates the "style" of dispersal was one in which glacial ice may have been strongly influenced by local bedrock topography and the regional structural trends. The ice tended to follow pre-existing valleys and lows, depositing till composed mainly of local bedrock. Gradations in Paleozoic clast content showed that the local bedrock lithology became the primary till component within 3 km of down-ice transport. Evidence is presented that indicated the last glaciation may have occurred as a relatively thin ice mass, followed by stagnation and recession. No evidence of a lateglacial re-advance was found within the study area. Because of the lack of a contact between the Dummer and drumlinized till, and because of results showing gradation of the Dummer till into the drumlinized till (as indicated by lithology content and grain size), it is suggested that no re-advance occurred.

Study of heat capacity measurement methods for small samples

Methods of measuring specific heats of small samples were studied. Three automated methods were explored, two of which have shown promising results. The adiabatic continuous heating method, has provided smooth well behaved data but further work is presently underway to improve on the results obtained so far . The decay method has been success fully implemented demonstrating reasonable agreement with accepted data for a copper test sample.

Human skeletal muscle pyruvate dehydrogenase phosphatase activity and expression : the effect of aerobic capacity

Activation of pyruvate dehydrogenase (PDH), which converts pyruvate into acetyl-CoA, is accomplished by a pair of specific phosphatases (PDP 1 & 2). A cross-sectional study investigating the effect of aerobic capacity on PDP activity and expression found that: 1) PDP activity and PDP! protein expression were positively correlated with most aerobic capacity measures in males (n=lS), but not females (n=12); 2) only males showed a positive correlation between PDP activity and PDPl protein expression (r=0.47; p=O.05), indicating that the increase in PDP activity in males is largely explained by increased PDPl protein expression, but that females rely on another level for PDP activity regulation; and 3) PDP} and Ela protein expression increase in unison when expressed relative to the E2 core. These data suggest that with increased aerobic capacity there is an increased capacity for carbohydrate oxidation through PDH, via El a, and an increased ability to activate PDH, via PDP, when exercising maximally.

The Development of a Survey to Assess the Type of Capacity within Nonprofit Sport Organizations

The topic of organizational capacity and organizational capacity-building has gained importance among Canadian nonprofit sport organizations. This is illustrated by practitioners calling for increased attention to the capacity-building matters of nonprofit organizations, and two critical Canadian federal government documents outlining strategic direction for the nonprofit sport sector. Consequently, the purpose of this quantitative research study was to develop a valid and reliable survey to categorize nonprofit sport organizations into capacity types identified by Stevens (Stevens, 2006). This quantitative research study offers a preliminary development towards achieving a reliable and valid tool for assessing types of nonprofit sport organizational capacity. This research provides interesting insight into what capacity means by organizing the all-encompassing literature into an easy to understand framework. In addition, it sets the stage for future researchers to build upon this survey development process to achieve a reliable and valid capacity measuring tool.

The role of leaders in building organizational learning capacity

In a world in which social, economic, and environmental circumstances are continuously evolving and increasingly complex, leaders face the challenging prospect of navigating their organizations through unpredictable operating conditions. Finding a way to tap into the learning capacity of the people who comprise their organizations may be the answer to adapt and to survive. This qualitative research study explored the role of leaders in building this organizational learning capacity. The literature identified three domains of personal, interpersonal, and organizational capacity for learning in an organizational setting. Interviews with three senior leaders who had successfully built learning capacity in their respective organizations revealed four elements of leader commitment: (a) to the process of building learning capacity, (b) to organizational objectives and results, (c) to personal actions and behaviours, and (d) to the people of the organization. Each of the four elements of leader commitment spans the three domains of learning capacity that can guide leaders as they build organizational learning capacity.

Organizational capacity and knowledge transfer : a qualitative case study of the 2007 Canada Winter Games host society

Understanding and managing the knowledge transfer process in sport organizations is an essential component to enhance organizational capacity. Very little research on either capacity or knowledge transfer within a sport organization exists. Consequently, the purpos e of this qualitative case study was to, examine the transfer of knowledge process within a major games host society. Specifically, two research goals guided the study: 1) To develop a model to explain a knowledge t r ans f e r process in a non-profit ma jor games hos t organization and 2) To examine the relevance of the model to a Canada Games Hos t Society. Data we r e collected from interviews with middle and senior level volunteers as well as senior s t a f f members (n= 27), document s and observations. The findings indicated three barriers to knowledge transfer: structural, systemic, and cultural. As a result of the findings a revised model for knowledge transfer wa s proposed that included modifications related to the direction of knowledge flow, timing of the knowledge transfer process, and group inter-relations. Implications identified the importance of intuition managers, time and organizational levels for successful knowledge transfer. Recommendations for future host societies and the Canada Games Council are presented.

Report of Loss in Capacity Due to Ice at Rankine Station - April 1934 through April 1937

A report compiled by Canadian Niagara Power Company describes the loss in capacity due to ice. The chart reveals the kilowatts lost and the duration of the outage and the "min. forebay elevation during ice loss period".

Assessing the adaptive capacity of the Ontario wine industry to climate change: A case study

The global wine industry is experiencing the impacts of climate change. Canada’s major wine sector, the Ontario Wine Industry (OWI) is no exception to this trend. Warmer winter and summer temperatures are affecting wine production. The industry needs to adapt to these challenges, but their capacity for this is unclear. To date, only a limited number of studies exist regarding the adaptive capacity of the wine industry to climate change. Accordingly, this study developed an adaptive capacity assessment framework for the wine industry. The OWI became the case study for the implementation of the assessment framework. Data was obtained by means of a questionnaire sent to grape growers, winemakers and supporting institutions in Ontario. The results indicated the OWI has adaptive capacity capabilities in financial, institutional, political, technological, perceptions, knowledge, diversity and social capital resources areas. Based on the OWI case study, this framework provides an effective means of assessing regional wine industries’ capacity to adapt to climate change.

A research capacity strengthening project for infectious diseases in Honduras: experience and lessons learned

Background: In Honduras, research capacity strengthening (RCS) has not received sufficient attention, but an increase in research competencies would enable local scientists to advance knowledge and contribute to national priorities, including the Millennium Development Goals (MDGs). Objective: This project aimed at strengthening research capacity in infectious diseases in Honduras, focusing on the School of Microbiology of the National Autonomous University of Honduras (UNAH). The primary objective was the creation of a research-based graduate program for the continued training of researchers. Parallel objectives included institutional strengthening and the facilitation of partnerships and networks. Methods: Based on a multi-stakeholder consultation, an RCS workplan was designed and undertaken from 2007 to 2012. Due to unexpected adverse circumstances, the first 2 years were heavily dedicated to implementing the project's flagship, an MSc program in infectious and zoonotic diseases (MEIZ). In addition, infrastructure improvements and demand-driven continuing education opportunities were facilitated; biosafety and research ethics knowledge and practices were enhanced, and networks fostering collaborative work were created or expanded. Results: The project coincided with the peak of UNAH's radical administrative reform and an unprecedented constitutional crisis. Challenges notwithstanding, in September 2009, MEIZ admitted the first cohort of students, all of whom undertook MDG-related projects graduating successfully by 2012. Importantly, MEIZ has been helpful in expanding the School of Microbiology's traditional etiology-based, disciplinary model to infectious disease teaching and research. By fulfilling its objectives, the project contributed to a stronger research culture upholding safety and ethical values at the university. Conclusions: The resources and strategic vision afforded by the project enhanced UNAH's overall research capacity and its potential contribution to the MDGs. Furthermore, increased research activity and the ensuing improvement in performance indicators at the prime Honduran research institution invoke the need for a national research system in Honduras.

Conceptualizing Institutional Capacity Building Through a Learning Process Set in Motion by a Foundation

Employing critical pedagogy and transformative theory as a theoretical framework, I examined a learning process associated with building capacity in community-based organizations (CBOs) through an investigation of the Institutional Capacity Building Program (ICBP) initiated by a Foundation. The study sought to: (a) examine the importance of institutional capacity building for individual and community development; (b) investigate elements of a process associated with a program and characteristics of a learning process for building capacity in CBOs; and (c) analyze the Foundation’s approach to synthesizing, systematizing, and sharing learning. The study used a narrative research design that included 3 one-on-one, hour-long interviews with 2 women having unique vantage points in ICBP: one is a program facilitator working at the Foundation and the other runs a CBO supported by the Foundation. The interviews’ semistructured questions allowed interviewees to share stories regarding their experience with the learning process of ICB and enabled themes to emerge from their day-to-day experience. Through the analysis of this learning process for institutional capacity building, a few lessons can be drawn from the experience of the Foundation.

Capacity to Attend to the Needs of Persons with Dual Diagnoses in the Criminal Justice System: Views of Mental Health and Criminal Justice Professionals

Currently, individuals with intellectual disabilities are overrepresented within the Criminal Justice System (Griffiths, Taillon-Wasmond & Smith, 2002). A primary problem within the Criminal Justice System is the lack of distinction between mental illness and intellectual disabilities within the Criminal Code. Due to this lack of distinction and the overall lack of identification procedures in the Criminal Justice System, individuals with disabilities will often not receive proper accommodations to enable them to play an equitable role in the justice system. There is increasing evidence that persons with intellectual disabilities are more likely than others to have their rights violated, not use court supports and accommodations as much as they should, and be subject to miscarriages of justice (Marinos, 2010). In this study, interviews were conducted with mental health (n=8) and criminal justice professionals (n=8) about how individuals with dual diagnosis are received in the Criminal Justice System. It was found that criminal justice professionals lack significant knowledge about dual diagnosis, including effective identification and therefore appropriate supports and accommodations. Justice professionals in particular were relatively ill-prepared in dealing effectively with this population. One finding to highlight is that there is misunderstanding between mental health professionals and justice professionals about who ought to take responsibility and accountability for this population.