Residential energy resources management by a SCADA system in case of excess wind generation

The end consumers in a smart grid context are seen as active players. The distributed generation resources applied in smart home system as a micro and small-scale systems can be wind generation, photovoltaic and combine heat and power facility. The paper addresses the management of domestic consumer resources, i.e. wind generation, solar photovoltaic, combined heat and power, electric vehicle with gridable capability and loads, in a SCADA system with intelligent methodology to support the user decision in real time. The main goal is to obtain the better management of excess wind generation that may arise in consumer’s distributed generation resources. The optimization methodology is performed in a SCADA House Intelligent Management context and the results are analyzed to validate the SCADA system.

Renewable-based generation integration in electricity markets with virtual power producers

The development of renewable energy sources and Distributed Generation (DG) of electricity is of main importance in the way towards a sustainable development. However, the management, in large scale, of these technologies is complicated because of the intermittency of primary resources (wind, sunshine, etc.) and small scale of some plants. The aggregation of DG plants gives place to a new concept: the Virtual Power Producer (VPP). VPPs can reinforce the importance of these generation technologies making them valuable in electricity markets. VPPs can ensure a secure, environmentally friendly generation and optimal management of heat, electricity and cold as well as optimal operation and maintenance of electrical equipment, including the sale of electricity in the energy market. For attaining these goals, there are important issues to deal with, such as reserve management strategies, strategies for bids formulation, the producers’ remuneration, and the producers’ characterization for coalition formation. This chapter presents the most important concepts related with renewable-based generation integration in electricity markets, using VPP paradigm. The presented case studies make use of two main computer applications:ViProd and MASCEM. ViProd simulates VPP operation, including the management of plants in operation. MASCEM is a multi-agent based electricity market simulator that supports the inclusion of VPPs in the players set.

Spatial analysis of the distribution of leprosy in the State of Ceará, Northeast Brazil

The aim of this study was to describe spatial patterns of the distribution of leprosy and to investigate spatial clustering of incidence rates in the state of Ceará, Northeast Brazil. The average incidence rate of leprosy for the period of 1991 to 1999 was calculated for each municipality of Ceará. Maps were used to describe the spatial distribution of the disease, and spatial statistics were applied to explore large- and small-scale variations of incidence rates. Three regions were identified in which the incidence of leprosy was particularly high. A spatial gradient in the incidence rates was identified, with a tendency of high rates to be concentrated on the North-South axis in the middle region of the state. Moran's I statistic indicated that a significant spatial autocorrelation also existed. The spatial distribution of leprosy in Ceará is heterogeneous. The reasons for spatial clustering of disease rates are not known, but might be related to an heterogeneous distribution of other factors such as crowding, social inequality, and environmental characteristics which by themselves determine the transmission of Mycobacterium leprae.

Comparación de los impactos ambientales y aspectos socioeconómicos de las cadenas de producción de anchoveta

Se presentan los primeros resultados del programa de investigación comparativo sobre las tres flotas pesqueras dedicadas a la extracción de anchoveta en el mar peruano (industrial de acero, industrial de madera y artesanal), así como sus cadenas de suministro hasta el abastecimiento del consumidor. El presente trabajo tiene por objetivo estudiar la sostenibilidad de las actividades involucradas en el suministro de proteínas, considerándose los impactos ambientales y los aspectos socio-económicos. Se realizó un esquema simple de un ecosistema pelágico de afloramiento y de los principales flujos de materia y energía, producto de la explotación humana. El esquema representa la situación peruana y muestra el alto nivel de antropización del sistema, debido al uso de energías fósiles, así como a la explotación y transformación tecnológica de recursos naturales terrestres (minerales, madera, etc.). Por otro lado, se muestra que la explotación del ecosistema marino peruano tiene repercusiones sobre el resto del planeta, debido a la exportación de harina y aceite de pescado destinados principalmente a actividades acuícolas. La flota anchovetera peruana se caracteriza por un amplio rango de tamaño de embarcaciones (de 2 a 600 t de capacidad de bodega); las de tamaño intermedio (30-100 t) son las más numerosas, pero las más grandes (>300 t) son las que acumulan el mayor poder de pesca. Los análisis sobre precios y distribución de la renta entre tripulantes y armadores muestran que, a pesar de que la mayor pesca de anchoveta es realizada por la flota industrial de acero, dedicada a la producción de harina y aceite de pescado y que tiene mayor eficiencia de captura por tripulante, la contribución de la pesca industrial de madera es significativa, pues genera mayor empleo por tonelada capturada y, posiblemente, no ocasiona mayor uso de energía. La pesca artesanal de anchoveta es la menos eficiente energéticamente y por tripulante, pero genera mucho más empleo por tonelada capturada; esta pesca representa menos del 3% de la producción total, del cual sólo una fracción va al consumo humano directo (CHD). Desde el año 2000, los precios de harina y aceite de pescado en los mercados internacionales se han incrementado, debido al aumento de la demanda asiática y al precio del combustible. Se debe estudiar en qué medida este aumento desfavorece el consumo interno de estos productos, así como el uso de anchoveta para CHD. Este análisis deberá ser validado y complementado con información de impacto ambiental; y podrían contribuir a la toma de decisión participativa, para un balance óptimo entre los tres segmentos de la flota y las cadenas de producción asociadas.

Business Sphere, Vol. 21, no.2

In the fall of 2007, a group of individuals representing a wide range of aspects of the wind industry gathered together and voted to establish the Iowa Wind Energy Association (IWEA). Now in its second year and operated out of Iowa Lakes Community College in Estherville, our association’s increasing membership rolls parallel the phenomenal growth of the wind energyindustry in our state. IWEA has just concluded our second annual meeting which brought together a host of wind energy experts to share their knowledge and expertise. Attending were wind energy companies, wind developers, agricultural landowners, large- and small-scale wind farm producers, construction companies, energy companies, educators and students. This broad range of interests pursuing common goals has made the Iowa WindEnergy Association one of the largest state wind organizations in the nation.

Kevyen istutuskoneen suunnittelu puuntaimille

Työssä pyritään suunnittelemaan kevyempi versio jo olemassa olevasta puuntaimien istutuslaitteesta. Työ koostuu kahdesta osasta. Ensimmäisessä teoria osuudessa käydään läpi mekatronisen koneen suunnittelussa huomioitavia seikkoja ja järjestelmällistä tuotekehitysprosessia yleisesti. Toisessa osassa esitellään nykyisten istutuslaitteiden kehityshistoriaa ja nykyisin koneellisessa metsänistutuksessa käytössä olevia laitteita. Loppuratkaisujen aikaan saamisessa pyritään QFD-menetelmää käyttämällä saamaan aikaan kevyen istutuskoneen vaatimusprofiili ja profiilissa ilmi tulleiden vaatimusten ja toiveiden pohjalta kehitettiin ratkaisuja joilla perinteistä koneellista istutus toimintaa voidaan uudistaa. Materiaalinvalinnan avulla optimoitiin kevyttä istutuskonetta pyrkimällä löytämään ympäristöystävälliset materiaalit jotka ovat tuotteen elinkaarta kokonaisuutena ajatellen parhaat mahdolliset. Työssä saatiin aikaan malli jolla on mahdollista jatkokehittelyn jälkeen ja kunnolla tuotteistettuna edistää koneellisen metsänistutuksen yleistymistä. Työn aikana huomattiin, että suurimmat esteet metsän istutuksen koneellistumiselle ovat nykyisten koneiden korkeat hankinta- ja käyttökustannukset sekä koneiden käyttämisen vaatima ammattitaito. Kustannuksia alentamalla ja käyttökynnystä madaltamalla voi edistää koneellisen metsänistutuksen yleistymistä tehostamisen rinnalla.

Effects of peeling methods on the quality of cubiu fruits

Cubiu (Solanum sessiliflorum Dunal) is an Amazonian Basin native fruit. Its importance comes from its high contents of pectin. Currently, processing technologies are necessary for the substitution of the traditional system (small crops and small-scale processing) for a larger scale system and thus increase the use of biodiversity and promote the implementation of Local Productive Arrangements of agribusiness in the Amazon. This research aims to evaluate the methods of peeling cubiu. Ripe fruits were divided into lots (150 each) and subjected to the following treatments: immersion in 2.5% NaOH boiling solution for 5 minutes, exposure to water vapor, and immersion in water at 96 ºC for 5, 10, 15 and 20 minutes. The peel released during heat treatment and immediately removed under running tap water. In the control treatment, the fruits were manually peeled (unheated) with a stainless steel knife. The treatments were evaluated for completeness and ease of peeling, tissue integrity, texture, and peroxidase activity. The immersion in 2.5% NaOH boiling solution (5 minutes) stood out as the best treatment since it inhibited the enzymatic browning and intensified the natural yellow color of the cubiu fruit and easily and fully peeled the whole fruit more rapidly without damaging its tissues. This treatment was chosen as the most advantageous because it can promote simultaneous peeling and bleaching. Therefore, it is recommended for cubiu industrial processing.

A high efficiency microturbine concept

There is a growing trend towards decentralized electricity and heat production throughout the world. Reciprocating engines and gas turbines have an essential role in the global decentralized energy markets and any improvement in their electrical efficiency has a significant impact from the environmental and economic viewpoints. This paper introduces an inter-cooled and recuperated two-shaft microturbine at 500 kW electric output range. The microturbine is optimized for a realistic combination of the turbine inlet temperature, the recuperation rate and the pressure ratio. The new microturbine design aims to achieve significantly increased performance within the range of microturbines and even competing with the efficiencies achieved in large industrial gas turbines. The simulated electrical efficiency is 45%. Improving the efficiency of combined heat and power (CHP) systems will significantly decrease the emissions and operating costs of decentralized heat and electricity production. Cost-effective, compact and environmentally friendly micro-and small-scale CHP turbine systems with high electrical efficiency will have an opportunity to successfully compete against reciprocating engines, which today are used in heat and power generation all over the world and manufactured in large production series. This paper presents a small-scale gas turbine process, capable of competing with reciprocating engine in terms of electrical efficiency.

¿Existe una trampa de pobreza en el sector rural en Colombia?

A diferencia de la generalidad de trabajos sobre la pobreza rural en Colombia, este estudio emplea un enfoque de activos para indagar acerca de los determinantes de la pobreza rural. En particular se examinan la existencia de no convexidades locales en el proceso de generación de ingresos, el grado de concentración de los hogares en ciertos rangos de acumulación de activos y la presencia de retornos marginales diferenciados a los activos. Con base en esto se proporciona evidencia prima facie acerca de la existencia de una trampa de pobreza en el sector rural, abriendo una línea promisoria de investigación sobre el tema, que puede contribuir de forma importante a su comprensión y a un mejor diseño de política social y sectorial.

Modelling of surface identifying characteristics using Fourier series

Texture and small-scale surface details are widely recognised as playing an important role in the haptic identification of objects. In order to simulate realistic textures in haptic virtual environments, it has become increasingly necessary to identify a robust technique for modelling of surface profiles. This paper describes a method whereby Fourier series spectral analysis is employed in order to describe the measured surface profiles of several characteristic surfaces. The results presented suggest that a bandlimited Fourier series can be used to provide a realistic approximation to surface amplitude profiles.

Storm surge frequency reduction in Venice under climate change

Increased tidal levels and storm surges related to climate change are projected to result in extremely adverse effects on coastal regions. Predictions of such extreme and small-scale events, however, are exceedingly challenging, even for relatively short time horizons. Here we use data from observations, ERA-40 reanalysis, climate scenario simulations, and a simple feature model to find that the frequency of extreme storm surge events affecting Venice is projected to decrease by about 30% by the end of the twenty-first century. In addition, through a trend assessment based on tidal observations we found a reduction in extreme tidal levels. Extrapolating the current +17 cm/century sea level trend, our results suggest that the frequency of extreme tides in Venice might largely remain unaltered under the projected twenty-first century climate simulations.

Mixed layer lateral eddy fluxes mediated by air-sea interaction

The modulation of air–sea heat fluxes by geostrophic eddies due to the stirring of temperature at the sea surface is discussed and quantified. It is argued that the damping of eddy temperature variance by such air–sea fluxes enhances the dissipation of surface temperature fields. Depending on the time scale of damping relative to that of the eddying motions, surface eddy diffusivities can be significantly enhanced over interior values. The issues are explored and quantified in a controlled setting by driving a tracer field, a proxy for sea surface temperature, with surface altimetric observations in the Antarctic Circumpolar Current (ACC) of the Southern Ocean. A new, tracer-based diagnostic of eddy diffusivity is introduced, which is related to the Nakamura effective diffusivity. Using this, the mixed layer lateral eddy diffusivities associated with (i) eddy stirring and small-scale mixing and (ii) surface damping by air–sea interaction is quantified. In the ACC, a diffusivity associated with surface damping of a comparable magnitude to that associated with eddy stirring (;500 m2 s21) is found. In frontal regions prevalent in the ACC, an augmentation of surface lateral eddy diffusivities of this magnitude is equivalent to an air–sea flux of 100 W m22 acting over a mixed layer depth of 100 m, a very significant effect. Finally, the implications for other tracer fields such as salinity, dissolved gases, and chlorophyll are discussed. Different tracers are found to have surface eddy diffusivities that differ significantly in magnitude.

Ensemble downscaling in coupled solar wind-magnetosphere modeling for space weather forecasting

Advanced forecasting of space weather requires simulation of the whole Sun-to-Earth system, which necessitates driving magnetospheric models with the outputs from solar wind models. This presents a fundamental difficulty, as the magnetosphere is sensitive to both large-scale solar wind structures, which can be captured by solar wind models, and small-scale solar wind “noise,” which is far below typical solar wind model resolution and results primarily from stochastic processes. Following similar approaches in terrestrial climate modeling, we propose statistical “downscaling” of solar wind model results prior to their use as input to a magnetospheric model. As magnetospheric response can be highly nonlinear, this is preferable to downscaling the results of magnetospheric modeling. To demonstrate the benefit of this approach, we first approximate solar wind model output by smoothing solar wind observations with an 8 h filter, then add small-scale structure back in through the addition of random noise with the observed spectral characteristics. Here we use a very simple parameterization of noise based upon the observed probability distribution functions of solar wind parameters, but more sophisticated methods will be developed in the future. An ensemble of results from the simple downscaling scheme are tested using a model-independent method and shown to add value to the magnetospheric forecast, both improving the best estimate and quantifying the uncertainty. We suggest a number of features desirable in an operational solar wind downscaling scheme.

Flow-through cell based on an array of gold microelectrodes obtained from modified integrated circuit chips

The construction of a flow-through cell incorporating an array of gold microelectrodes is described and its application to flow injection analysis with amperometric detection is presented, Simple modification of almost any conventional integrated circuit chip, used as an inexpensive source of pre-assembled gold micro-wires, leads to the rapid and successful preparation of arrays of 8-48 elements, the polymeric encapsulation material from the top face of the chip is removed by abrasion until the gold micro-mires (used to interconnect the silicon circuit to the external contact pins of the chip) are disrupted and their transversal (elliptical) sections become exposed. Once polished, the flat and smooth top surface of the gold microelectrode-array chip (MEAC) is provided with a spacer and fitted under pressure against an acrylic block with the reference and auxiliary electrodes, to form the electrochemical (thin-layer) flow cell, while the contact pins are plugged into a standard IC socket, This design ensures autonomous electric contact with each electrode and allows fast dismantling for polishing or substitution, the performance of flow cells with MEACs was investigated utilizing the technique of reverse pulse amperometry without oxygen removal, A method was established for the determination of the copper concentration in sugar cane spirit, regulated by law for beverages, Samples from industrial producers and small-scale (alembic) brewers were compared, With a 24 MEAC, a detection limit of 30 mu g I-l of copper (4.7 x 10(-7) mol l(-1) of Cu-II for 100 mu l injections) was calculated, Routine operation was established at a frequency of 60-90 determinations per hour, Intercomparison with atomic absorption spectrometric determinations resulted in excellent agreement.

Evaluation of Sodium Lauryl Sulfate as a Blackbird Wetting Agent

New and improved strategies are needed for managing overabundant blackbird (Icteridae spp.) populations in some areas of the United States. From 2004 to 2007, we evaluated sodium lauryl sulfate (SLS) as a wetting agent during controlled outdoor cage and flight pen tests in Colorado and small-scale field tests at urban blackbird roosts in Missouri. In the outdoor cage tests (ambient temperature -5 to 2° C), mortality of male red-winged blackbirds (Agelaius phoeniceus) sprayed with 1, 2, and 5 ml of SLS on the back feathers only, on the breast feathers only, or on both breast and back feathers ranged from 25% to 100%. A SLS spray on male red-winged blackbirds at 2° C ambient temperature with 1 ml of SLS sprayed on breast feathers and back feathers resulted in 90% mortality in less than 60 minutes. In a flight pen test (-12 to -5° C ambient temperature ), SLS sprayed at 20 l per 3,400 l of water with a single ground-based sprinkler-head system over 35 male red-winged blackbirds roosting in cedar trees (Juniperus virginiana) resulted in 53% mortality. There was no mortality in the control group exposed to the same treatment without the SLS. Small-scale field tests conducted in Missouri at 6 sites with a single ground-based sprinkler-head spray system and at 2 sites with 4 sprinkler-head spray systems resulted in mortality that ranged from 0 to 4,750 and 4,500 to 15,000 blackbirds and starlings, respectively. Spray operations lasted from 28 to 208 minutes. Each spray covered about 200 m2 . At all sites, mortality of blackbirds sprayed with the SLS occurred as soon as 30 minutes post-SLS application. Mortality at two sites where pump problems precluded completing the spray ranged from 0 to 800 birds. Air leaving the system as the system was activated caused birds to flush from the roost trees. Poor water quality and pump durability were problems at some sites.