A tabela periódica dos elementos químicos prevista por redes neurais artificiais de Kohonen

Although several chemical elements were not known by end of the 18th century, Mendeleyev came up with an astonishing achievement: the periodic table of elements. He was not only able to predict the existence of (then) new elements but also to provide accurate estimates of their chemical and physical properties. This is certainly a relevant example of the human intelligence. Here, we intend to shed some light on the following question: Can an artificial intelligence system yield a classification of the elements that resembles, in some sense, the periodic table? To achieve our goal, we have fed a self-organized map (SOM) with information available at Mendeleyev's time. Our results show that similar elements tend to form individual clusters. Thus, SOM generates clusters of halogens, alkaline metals and transition metals that show a similarity with the periodic table of elements.

Tietokonepelien tekoälyn rajat

Tutkimuksessa selvitettiin, kuinka hyvä tekoäly tietokonepeliin on mahdollista toteuttaa nykytiedolla ja -tekniikalla. Tekoäly rajattiin tarkoittamaan tekoälyn ohjaamia pelihahmoja. Lisäksi yksinkertaisia tekoälytoteutuksia ei huomioitu. Työ toteutettiin tutustumalla aiheeseen liittyvään kirjallisuuteen sekä kehittäjäyhteisön web-sivustojen tietoon. Hyvän tekoälyn kriteereiksi valikoituivat viihdyttävyys ja uskottavuus. Katsaus suosituimpiin toteuttamistekniikoihin ja tekoälyn mahdollisuuksiin osoitti, että teoriassa hyvinkin edistynyt tekoäly on toteutettavissa. Käytännössä tietokoneen rajalliset resurssit, kehittäjien rajalliset taidot ja pelinkehitysprojektien asettamat vaatimukset näyttävät kuitenkin rajoittavan tekoälyn toteuttamista kaupallisessa tuotteessa.

Decision support system for the diagnosis of schizophrenia disorders

Clinical decision support systems are useful tools for assisting physicians to diagnose complex illnesses. Schizophrenia is a complex, heterogeneous and incapacitating mental disorder that should be detected as early as possible to avoid a most serious outcome. These artificial intelligence systems might be useful in the early detection of schizophrenia disorder. The objective of the present study was to describe the development of such a clinical decision support system for the diagnosis of schizophrenia spectrum disorders (SADDESQ). The development of this system is described in four stages: knowledge acquisition, knowledge organization, the development of a computer-assisted model, and the evaluation of the system's performance. The knowledge was extracted from an expert through open interviews. These interviews aimed to explore the expert's diagnostic decision-making process for the diagnosis of schizophrenia. A graph methodology was employed to identify the elements involved in the reasoning process. Knowledge was first organized and modeled by means of algorithms and then transferred to a computational model created by the covering approach. The performance assessment involved the comparison of the diagnoses of 38 clinical vignettes between an expert and the SADDESQ. The results showed a relatively low rate of misclassification (18-34%) and a good performance by SADDESQ in the diagnosis of schizophrenia, with an accuracy of 66-82%. The accuracy was higher when schizophreniform disorder was considered as the presence of schizophrenia disorder. Although these results are preliminary, the SADDESQ has exhibited a satisfactory performance, which needs to be further evaluated within a clinical setting.

Design and implementation of machine vision system for the mobile assembly robot

The review of intelligent machines shows that the demand for new ways of helping people in perception of the real world is becoming higher and higher every year. This thesis provides information about design and implementation of machine vision for mobile assembly robot. The work has been done as a part of LUT project in Laboratory of Intelligent Machines. The aim of this work is to create a working vision system. The qualitative and quantitative research were done to complete this task. In the first part, the author presents the theoretical background of such things as digital camera work principles, wireless transmission basics, creation of live stream, methods used for pattern recognition. Formulas, dependencies and previous research related to the topic are shown. In the second part, the equipment used for the project is described. There is information about the brands, models, capabilities and also requirements needed for implementation. Although, the author gives a description of LabVIEW software, its add-ons and OpenCV which are used in the project. Furthermore, one can find results in further section of considered thesis. They mainly represented by screenshots from cameras, working station and photos of the system. The key result of this thesis is vision system created for the needs of mobile assembly robot. Therefore, it is possible to see graphically what was done on examples. Future research in this field includes optimization of the pattern recognition algorithm. This will give less response time for recognizing objects. Presented by author system can be used also for further activities which include artificial intelligence usage.

Tekoälyn hyödyntäminen liiketoiminnassa: IBM Watson

Tämän kandidaatintyön tavoitteena on käsitellä tekoälyjärjestelmien käyttöä liiketoiminnassa. Tekoälyä on tutkittu pitkään, mutta sen soveltaminen liiketoimintaan on suhteellisen uutta. Työssä esitellään IBM Watson Analytics- tekoälyjärjestelmän käyttöä. Tämän esittelyn kautta on tarkoitus näyttää, kuinka helposti tekoälyjärjestelmät todellisuudessa ovat hyödynnettävissä. Kirjallisuudesta löytyvien esimerkkien kautta työssä esitellään, minkälaisia järjestelmiä tällä hetkellä käytetään, ja millaisiin tarkoituksiin ne on luotu. Tekoälyjärjestelmien monimuotoisuuden vuoksi niitä käytetäänkin laajalti erilaisiin sovelluksiin. Kirjallisuudesta huomataan, että tekoälyjärjestelmät koostuvat usein monesta eri tavasta toteuttaa tekoälyä. Kirjallisuuden ja tekoälyn toteutuksen teorian pohjalta huomataan myös, että tekoälyjärjestelmät toimivat useimmiten erilaisissa päätöksentekoa tukevissa tai helpottavissa tehtävissä. Työssä esitetään myös IBM Watson Analyticsin ja avoimen datan avulla, kuinka helposti tekoälyjärjestelmiä pystytään hyödyntämään. Työssä näytetään tämän esimerkin kautta, miten ja minkä tyyppistä liiketoimintaa tukevaa informaatiota tekoälyjärjestelmä pystyy helposti tuottamaan.

Generating Relation Algebras for Qualitative Spatial Reasoning

Basic relationships between certain regions of space are formulated in natural language in everyday situations. For example, a customer specifies the outline of his future home to the architect by indicating which rooms should be close to each other. Qualitative spatial reasoning as an area of artificial intelligence tries to develop a theory of space based on similar notions. In formal ontology and in ontological computer science, mereotopology is a first-order theory, embodying mereological and topological concepts, of the relations among wholes, parts, parts of parts, and the boundaries between parts. We shall introduce abstract relation algebras and present their structural properties as well as their connection to algebras of binary relations. This will be followed by details of the expressiveness of algebras of relations for region based models. Mereotopology has been the main basis for most region based theories of space. Since its earliest inception many theories have been proposed for mereotopology in artificial intelligence among which Region Connection Calculus is most prominent. The expressiveness of the region connection calculus in relational logic is far greater than its original eight base relations might suggest. In the thesis we formulate ways to automatically generate representable relation algebras using spatial data based on region connection calculus. The generation of new algebras is a two pronged approach involving splitting of existing relations to form new algebras and refinement of such newly generated algebras. We present an implementation of a system for automating aforementioned steps and provide an effective and convenient interface to define new spatial relations and generate representable relational algebras.

Object-Oriented Genetic Programming for the Automatic Inference of Graph Models for Complex Networks

Complex networks are systems of entities that are interconnected through meaningful relationships. The result of the relations between entities forms a structure that has a statistical complexity that is not formed by random chance. In the study of complex networks, many graph models have been proposed to model the behaviours observed. However, constructing graph models manually is tedious and problematic. Many of the models proposed in the literature have been cited as having inaccuracies with respect to the complex networks they represent. However, recently, an approach that automates the inference of graph models was proposed by Bailey [10] The proposed methodology employs genetic programming (GP) to produce graph models that approximate various properties of an exemplary graph of a targeted complex network. However, there is a great deal already known about complex networks, in general, and often specific knowledge is held about the network being modelled. The knowledge, albeit incomplete, is important in constructing a graph model. However it is difficult to incorporate such knowledge using existing GP techniques. Thus, this thesis proposes a novel GP system which can incorporate incomplete expert knowledge that assists in the evolution of a graph model. Inspired by existing graph models, an abstract graph model was developed to serve as an embryo for inferring graph models of some complex networks. The GP system and abstract model were used to reproduce well-known graph models. The results indicated that the system was able to evolve models that produced networks that had structural similarities to the networks generated by the respective target models.

Changements et évolution des universités conventionnelles sous l’influence des technologies de l’information et de la communication (TIC): le cas du contexte universitaire nord-américain

Cette recherche part du constat de l’utilisation des nouvelles technologies qui se généralise dans l’enseignement universitaire (tant sur campus qu’en enseignement à distance), et traite cette question sous trois aspects institutionnel, pédagogique et technologique. La recherche a été menée à travers quinze universités canadiennes où nous avons interrogé vingt-quatre universitaires, nommément des responsables de centres de pédagogie universitaire et des experts sur la question de l’intégration des technologies à l’enseignement universitaire. Pour le volet institutionnel, nous avons eu recours à un cadre théorique qui met en relief le changement de structure et de fonctionnement des universités à l’ère d’Internet, suivant le modèle théorique de l’Open System Communications Net de Kershaw et Safford (1998, 2001). Les résultats, à l’aune de ce modèle, confirment que les universités conventionnelles sont dans une phase de transformation due à l’utilisation des technologies de l'information et de la communication (TIC). De plus, les cours hybrides, la bimodalité, des universités entièrement à distance visant une clientèle estudiantine au-delà des frontières régionales et nationales, des universités associant plusieurs modèles, des universités fonctionnant à base d’intelligence artificielle, sont les modèles principaux qui ont la forte possibilité de s’imposer dans le paysage universitaire nord-américain au cours des prochaines décennies. Enfin, à la lumière du modèle théorique, nous avons exploré le rôle de l’université, ainsi en transformation, au sein de la société tout comme les rapports éventuels entre les institutions universitaires. S’agissant de l’aspect pédagogique, nous avons utilisé une perspective théorique fondée sur le modèle du Community of Inquiry (CoI) de Garrison, Anderson et Archer (2000), revu par Vaughan et Garrison (2005) et Garrison et Arbaugh (2007) qui prône notamment une nouvelle culture de travail à l’université fondée sur trois niveaux de présence. Les résultats indiquent l’importance d’éléments relatifs à la présence d’enseignement, à la présence cognitive et à la présence sociale, comme le suggère le modèle. Cependant, la récurrence -dans les trois niveaux de présence- de certains indicateurs, suggérés par les répondants, tels que l’échange d’information, la discussion et la collaboration, nous ont amenés à conclure à la non-étanchéité du modèle du CoI. De plus, certaines catégories, de par leur fréquence d’apparition dans les propos des interviewés, mériteraient d’avoir une considération plus grande dans les exigences pédagogiques que requiert le nouveau contexte prévalant dans les universités conventionnelles. C’est le cas par exemple de la catégorie « cohésion de groupe ». Enfin, dans le troisième volet de la recherche relatif à la dimension technologique, nous nous sommes inspirés du modèle théorique d’Olapiriyakul et Scher (2006) qui postule que l’infrastructure dans l’enseignement doit être à la fois une technologie pédagogique et une technologie d’apprentissage pour les étudiants (instructional technology and student learning technology). Partant de cette approche, le volet technologique de notre recherche a consisté à identifier les fonctionnalités exigées de la technologie pour induire une évolution institutionnelle et pédagogique. Les résultats à cet égard ont indiqué que les raisons pour lesquelles les universités choisissent d’intégrer les TIC à l’enseignement ne sont pas toujours d’ordre pédagogique, ce qui explique que la technologie elle-même ne revête pas forcément les qualités a priori requises pour une évolution pédagogique et institutionnelle. De ce constat, les technologies appropriées pour une réelle évolution pédagogique et institutionnelle des universités ont été identifiées.

Non invasive classification system of scoliosis curve types using least-squares support vector machines

Objective To determine scoliosis curve types using non invasive surface acquisition, without prior knowledge from X-ray data. Methods Classification of scoliosis deformities according to curve type is used in the clinical management of scoliotic patients. In this work, we propose a robust system that can determine the scoliosis curve type from non invasive acquisition of the 3D back surface of the patients. The 3D image of the surface of the trunk is divided into patches and local geometric descriptors characterizing the back surface are computed from each patch and constitute the features. We reduce the dimensionality by using principal component analysis and retain 53 components using an overlap criterion combined with the total variance in the observed variables. In this work, a multi-class classifier is built with least-squares support vector machines (LS-SVM). The original LS-SVM formulation was modified by weighting the positive and negative samples differently and a new kernel was designed in order to achieve a robust classifier. The proposed system is validated using data from 165 patients with different scoliosis curve types. The results of our non invasive classification were compared with those obtained by an expert using X-ray images. Results The average rate of successful classification was computed using a leave-one-out cross-validation procedure. The overall accuracy of the system was 95%. As for the correct classification rates per class, we obtained 96%, 84% and 97% for the thoracic, double major and lumbar/thoracolumbar curve types, respectively. Conclusion This study shows that it is possible to find a relationship between the internal deformity and the back surface deformity in scoliosis with machine learning methods. The proposed system uses non invasive surface acquisition, which is safe for the patient as it involves no radiation. Also, the design of a specific kernel improved classification performance.

Design and Development of a Frame Based MT System for English-to-ISL

This paper presents the design and development of a frame based approach for speech to sign language machine translation system in the domain of railways and banking. This work aims to utilize the capability of Artificial intelligence for the improvement of physically challenged, deaf-mute people. Our work concentrates on the sign language used by the deaf community of Indian subcontinent which is called Indian Sign Language (ISL). Input to the system is the clerk’s speech and the output of this system is a 3D virtual human character playing the signs for the uttered phrases. The system builds up 3D animation from pre-recorded motion capture data. Our work proposes to build a Malayalam to ISL

Agent Based Evacuation Simulation Using Leader-Follower Model

Agent based simulation is a widely developing area in artificial intelligence.The simulation studies are extensively used in different areas of disaster management. This work deals with the study of an agent based evacuation simulation which is being done to handle the various evacuation behaviors.Various emergent behaviors of agents are addressed here. Dynamic grouping behaviors of agents are studied. Collision detection and obstacle avoidances are also incorporated in this approach.Evacuation is studied with single exits and multiple exits and efficiency is measured in terms of evacuation rate, collision rate etc.Net logo is the tool used which helps in the efficient modeling of scenarios in evacuation

Single Frame Image Super Resolution Using Learned Directionlets

In this paper, a new directionally adaptive, learning based, single image super resolution method using multiple direction wavelet transform, called Directionlets is presented. This method uses directionlets to effectively capture directional features and to extract edge information along different directions of a set of available high resolution images .This information is used as the training set for super resolving a low resolution input image and the Directionlet coefficients at finer scales of its high-resolution image are learned locally from this training set and the inverse Directionlet transform recovers the super-resolved high resolution image. The simulation results showed that the proposed approach outperforms standard interpolation techniques like Cubic spline interpolation as well as standard Wavelet-based learning, both visually and in terms of the mean squared error (mse) values. This method gives good result with aliased images also.

A Language for Interactive Cooperative Agents

Cooperative behaviour of agents within highly dynamic and nondeterministic domains is an active field of research. In particular establishing highly responsive teamwork, where agents are able to react on dynamic changes in the environment while facing unreliable communication and sensory noise, is an open problem. Moreover, modelling such responsive, cooperative behaviour is difficult. In this work, we specify a novel model for cooperative behaviour geared towards highly dynamic domains. In our approach, agents estimate each other’s decision and correct these estimations once they receive contradictory information. We aim at a comprehensive approach for agent teamwork featuring intuitive modelling capabilities for multi-agent activities, abstractions over activities and agents, and a clear operational semantic for the new model. This work encompasses a complete specification of the new language, ALICA.