Abordagem Percutânea de Atresia Pulmonar com Septo Interventricular Intacto. Perfuração da Válvula Pulmonar com Catéter de Radiofrequência e Implantação de Stent no Canal Arterial

A atrésia pulmonar com septo interventricular intacto (AtrP-SI) é uma cardiopatia congénita rara e de prognóstico reservado. Apresenta grande variabilidade anatómica, com diversos graus de hipoplasia do ventrículo direito (VD) o que condiciona a abordagem terapêutica. Idealmente, o objectivo é a reconstituição de uma circulação de tipo biventricular. Para o efeito, dispomos de técnicas cirúrgicas e percutâneas. A perfuração da válvula pulmonar com energia de radiofrequência (RF) é um método válido para doentes com atresia de tipo membranoso, VD sem hipoplasia marcada (bipartido ou tripartido) e circulação coronária não dependente do VD. Por vezes, há necessidade de suplementar a circulação pulmonar implantando um stent no canal arterial. Desta forma é possível tratar alguns doentes com técnicas exclusivamente percutâneas. Relatamos o primeiro caso conhecido em Portugal de um recém-nascido com AtrP-SI submetido a perfuração com radiofrequência e, num segundo tempo, implantação de stent no canal arterial.

Characterization of the molluscicidal activity of Bauhinia variegata and Mimusops elengi plant extracts against the fasciola vector lymnaea acuminata

The molluscicidal activity of Bauhinia variegata leaf and Mimusops elengi bark was studied against vector snail Lymnaea acuminata. The toxicity of both plants was time and concentration-dependent. Among organic extracts, ethanol extracts of both plants were more toxic. Toxicity of B. variegata leaf ethanolic extract (96h LC50- 14.4 mg/L) was more pronounced than M. elengi bark ethanolic extract (96h LC50-15.0 mg/L). The 24h LC50 of column purified fraction of B. variegata and M. elengi bark were 20.3 mg/L and 18.3 mg/L, respectively. Saponin and quercetin were characterized and identified as active molluscicidal component. Co-migration of saponin (Rf 0.48) and quercetin (Rf 0.52) with column purified bark of M. elengi and leaf of B. variegata on thin layer chromatography demonstrate same Rf value i.e. 0.48 and 0.52, respectively. The present study clearly indicates the possibility of using M. elengi and/or B. variegata as potent molluscicide.

Influência do treino do passo rápido voluntário nas estratégias de feedforward e feedback em Adultos mais Velhos

Introdução:O envelhecimento influencia negativamente o controlo postural, diminuindo a capacidade de recuperar o equilíbrio após uma perturbação externa e consequentemente aumento do risco de queda nos adultos mais velhos Objetivo(s):Verificar a influência do treino do passo rápido voluntário nas estratégias de feedforward e feedback em adultos mais velhos aquando o stepping anterior e posterior, bem como o timing e sequência de ativação muscular, ajustes posturais antecipatórios (APA) e compensatórios (APC1,APC2), comprimento, latência, velocidade média (VM) do passo e estratégias de passo lateral Métodos:19 participantes foram distribuídos aleatoriamente por dois grupos, o grupo experimental (n=9) e o grupo controlo (n=10), estudo randomizado controlado. Ambos foram submetidos a um protocolo de exercício físico durante 3 meses, 2 vezes/semana. Adicionalmente o grupo experimental (GE) realizou o treino do passo rápido voluntário bilateral nas várias direções. A resposta a um desequilíbrio postural em vários sentidos e consequente resposta de stepping anterior, posterior ou lateral foram avaliadas por meio de eletromiografia de superfície e por um sistema de imagem 3D Resultados: Na variação entre o momento inicial e final (M0-M1), durante o stepping anterior o GE, comparativamente ao GC, aumentou e diminuiu significativamente o timing do RF ipsilateral e GemM, respetivamente. Na variação do timing dos músculos BF ipsilateral e contralateral e TA contralateral, o GE diminuiu significativamente menos do que o GC. O GE aumentou significativamente o comprimento do stepping posterior do que o GC. Quanto à variação da latência observou-se que o GE aumentou significativamente do que o GC nos dois steppings. Na variação da VM, do stepping anterior, o GE diminuiu significativamente mais do que GC. O GE aumentou e diminuiu significativamente os APAS e os APC1 do que o GC no stepping posterior e anterior, respetivamente. Verificou-se que a estratégia mais frequente nos dois momentos e grupos foi a estratégia de stepping lateral direto Conclusão: A contínua prática do stepping rápido voluntário parece promover um melhor controlo postural sendo um importante exercício específico para prevenção de quedas

Design of switched-capacitor filters using low gain amplifiers

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Espectroscopia óptica de emissão em plasmas frios aplicados à produção de materiais nanoestruturados

Dissertação para obtenção do Grau de Mestre em Engenharia Física

Reação de fase aguda e parasitismo na veia central da supra-renal de chagásicos crônicos

A reação sistêmica aos traumatismos e infecções graves, reação de fase aguda, (RFA), pode determinar imunossupressão e reativação de infecções latentes. O objetivo do trabalho foi verificar, em 71 chagásicos crônicos com ousem RFÁ, a freqüência de parasitismo pelo T. cruzi na veia central da supra-renal (VCSR). Os critérios para RFA (+) foram observados em 30 chagásicos: l)morteporsepsis e/outrauma após evolução maior que umasemana e 2)presença de úlceras de stress sangrantes, ou 3) hiperplasia reacional do baço ou 4) esteatose hepática. Registrou-se peso e altura e calculou-se o índice de massa corporal (IMC). Chagásicos com RFA (+) apresentaram maior comprometimento nutricional que os RFA (-): peso = 49,0 vs 54,5 kg; IMC = 17,5 vs 20,6kg/m2 (mediana p< Q,05). O parasitismo na VCSR não diferiu entre os grupos: 43,3% e 43,9%, respectivamente. Concluímos que os chagásicos com RFA (+) são mais subnutridos que os RFA (-) e que o desenvolvimento pré-óbito de RFA não afeta a frequência de parasitismo na VCSR.

Consideraciones sobre elaislamiento en exudados vaginales de Streptococcus morbillorum

De el estúdio de 195 exudados vaginales enviados por el Servicio de Ginecologia de este hospital, durante el período 1988-1990, hemos seleccionado aquellos en los que el cultivo fue positivo para estreptococos, 58 (30%) de los cuales 26 (44.8%) correspondia a Streptococcus morbillorum, 9 (15.5%) a Gardnerella vaginalis, 5 (8.6%) a Enterococcus faecalis-durans, y a Streptococcus agalactiae, 3 (5.1%) a Streptococcus mitis y Streptococcus mitis, 2 (3-4%) a Streptococcus bovis y Streptococcus cremoris y 1 (1.7%) a Streptococcus salivarius, Streptococcus equinus y Strptococcus sanguis II respectivamente. En todos los casos se observo antecedentes de actuacción medico- quirurjica en el tracto genital, y en el 52.8% de los casos fuô concomitante con el diagnostico clinico-micologico de candidiasis vaginal. La ideittificaccion bacteriologica se realizo mediante el sistema API 20 STREP (sistema api bioMêríeux GmbH, Nütingen, Alemania) dando un patron tipico ("excelente identificacción") para el Streptococcus morbillorum.

Materiais termocrómicos de filme fino

Dissertação para obtenção do Grau de Mestre em Engenharia de Materiais

Mechanical characterization of aortas using 2D ultrasound elastography

Rupture of aortic aneurysms (AA) is a major cause of death in the Western world. Currently, clinical decision upon surgical intervention is based on the diameter of the aneurysm. However, this method is not fully adequate. Noninvasive assessment of the elastic properties of the arterial wall can be a better predictor for AA growth and rupture risk. The purpose of this study is to estimate mechanical properties of the aortic wall using in vitro inflation testing and 2D ultrasound (US) elastography, and investigate the performance of the proposed methodology for physiological conditions. Two different inflation experiments were performed on twelve porcine aortas: 1) a static experiment for a large pressure range (0 – 140 mmHg); 2) a dynamic experiment closely mimicking the in vivo hemodynamics at physiological pressures (70 – 130 mmHg). 2D raw radiofrequency (RF) US datasets were acquired for one longitudinal and two cross-sectional imaging planes, for both experiments. The RF-data were manually segmented and a 2D vessel wall displacement tracking algorithm was applied to obtain the aortic diameter–time behavior. The shear modulus G was estimated assuming a Neo-Hookean material model. In addition, an incremental study based on the static data was performed to: 1) investigate the changes in G for increasing mean arterial pressure (MAP), for a certain pressure difference (30, 40, 50 and 60 mmHg); 2) compare the results with those from the dynamic experiment, for the same pressure range. The resulting shear modulus G was 94 ± 16 kPa for the static experiment, which is in agreement with literature. A linear dependency on MAP was found for G, yet the effect of the pressure difference was negligible. The dynamic data revealed a G of 250 ± 20 kPa. For the same pressure range, the incremental shear modulus (Ginc) was 240 ± 39 kPa, which is in agreement with the former. In general, for all experiments, no significant differences in the values of G were found between different image planes. This study shows that 2D US elastography of aortas during inflation testing is feasible under controlled and physiological circumstances. In future studies, the in vivo, dynamic experiment should be repeated for a range of MAPs and pathological vessels should be examined. Furthermore, the use of more complex material models needs to be considered to describe the non-linear behavior of the vascular tissue.

A piezoelectric based energy harvester interface for a CMOS wireless sensor IC

In this thesis a piezoelectric energy harvesting system, responsible for regulating the power output of a piezoelectric transducer subjected to ambient vibration, is designed to power an RF receiver with a 6 mW power consump-tion. The electrical characterisation of the chosen piezoelectric transducer is the starting point of the design, which subsequently presents a full-bridge cross-coupled rectifier that rectifies the AC output of the transducer and a low-dropout regulator responsible for delivering a constant voltage system output of 0.6 V, with low voltage ripple, which represents the receiver’s required sup-ply voltage. The circuit is designed using CMOS 130 nm UMC technology, and the system presents an inductorless architecture, with reduced area and cost. The electrical simulations run for the complete circuit lead to the conclusion that the proposed piezoelectric energy harvesting system is a plausible solution to power the RF receiver, provided that the chosen transducer is subjected to moderate levels of vibration.

Non-gyrator type active inductors

Modern CMOS radio frequency (RF) Receivers have enabled efficient and increasing applications. The main requirement is to have system in a single chip, in order to minimize area and cost. For the purpose it is required the development of inductorless circuits for the key blocks of an RF receiver. Examples of this key blocks are RC oscillators, RF band pass filters, and Low Noise Amplifiers. The present dissertation presents an inductorless wideband MOSFET-only RF Non-Gyrator Type of Active Inductors with low area, low cost, and very low power, capable of covering the whole WMTS, and ISM, band and intended for biomedical applications. The proposed circuit is based on a floating capacitor connected between two controlled current sources. The first current source, which is controlled by the circuit input voltage, has two objectives: supply current to the capacitor (

8-Phase Ring oscillator for modern receivers

The evolution of receiver architectures, built in modern CMOS technologies, allows the design of high efficient receivers. A key block in modern receivers is the oscillator. The main objective of this thesis is to design a very low power and low area 8-Phase Ring Oscillator for biomedical applications (ISM and WMTS bands). Oscillators with multiphase outputs and variable duty cycles are required. In this thesis we are focused in 12.5% and 50% duty-cycles approaches. The proposed circuit uses eight inverters in a ring structure, in order to generate the output duty cycle of 50%. The duty cycle of 1/8 is achieved through the combination of the longer duty cycle signals in pairs, using, for this purpose, NAND gates. Since the general application are not only the wireless communications context, as well as industrial, scientific and medical plans, the 8-Phase Oscillator is simulated to be wideband between 100 MHz and 1 GHz, and be able to operate in the ISM bands (447 MHz-930 MHz) and WMTS (600 MHz). The circuit prototype is designed in UMC 130 nm CMOS technology. The maximum value of current drawn from a DC power source of 1.2 V, at a maximum frequency of 930 MHz achieved, is 17.54 mA. After completion of the oscillator layout studied (occupied area is 165 μm x 83 μm). Measurement results confirm the expected operating range from the simulations, and therefore, that the oscillator fulfil effectively the goals initially proposed in order to be used as Local Oscillator in RF Modern Receivers.

Quadrature generators based on ring oscillators and shift registers

Quadrature oscillators are key elements in modern radio frequency (RF) transceivers and very useful nowadays in wireless communications, since they can provide: low quadrature error, low phase-noise, and wide tuning range (useful to cover several bands). RC oscillators can be fully integrated without the need of external components (external high Q-inductors), optimizing area, cost, and power consumption. The conventional structure of ring oscillator offers poor frequency stability and phasenoise, low quality factor (Q), and besides being vulnerable to process, voltage and temperature (PVT) variations, its performance degrades as the frequency of operation increases. This thesis is devoted to quadrature oscillators and presents a detailed comparative study of ring oscillator and shift register (SR) approaches. It is shown that in SRs both phase-noise and phase error are reduced, while ring oscillators have the advantage of occupying less area and less consumption due to the reduced number of components in the circuit. Thus, although ring oscillators are more suitable for biomedical applications, SRs are more appropriate for wireless applications, especially when specification requirements are more stringent and demanding. The first architecture studied consists in a simple CMOS ring oscillator employing an odd number of static single-ended inverters as delay cells. Subsequently, the quadrature 4-stage ring oscillator concept is shown and post-layout simulations are presented. The 3 and 4-phase single-frequency local oscillator (LO) generators employing SRs are presented, the latter with 50% and 25% duty-cycles. The circuits operate at 600 MHz and 900 MHz, and were designed in a 130 nm standard CMOS technology with a voltage supply of 1.2 V.

Switching mode power amplifier for bluetooth applications

Modern fully integrated transceivers architectures, require circuits with low area, low cost, low power, and high efficiency. A key block in modern transceivers is the power amplifier, which is deeply studied in this thesis. First, we study the implementation of a classical Class-A amplifier, describing the basic operation of an RF power amplifier, and analysing the influence of the real models of the reactive components in its operation. Secondly, the Class-E amplifier is deeply studied. The different types of implementations are reviewed and theoretical equations are derived and compared with simulations. There were selected four modes of operation for the Class-E amplifier, in order to perform the implementation of the output stage, and the subsequent comparison of results. This led to the selection of the mode with the best trade-off between efficiency and harmonics distortion, lower power consumption and higher output power. The optimal choice was a parallel circuit containing an inductor with a finite value. To complete the implementation of the PA in switching mode, a driver was implemented. The final block (output stage together with the driver) got 20 % total efficiency (PAE) transmitting 8 dBm output power to a 50 W load with a total harmonic distortion (THD) of 3 % and a total consumption of 28 mW. All implementations are designed using standard 130 nm CMOS technology. The operating frequency is 2.4 GHz and it was considered an 1.2 V DC power supply. The proposed circuit is intended to be used in a Bluetooth transmitter, however, it has a wider range of applications.