Evaluation of dental pulp repair using low level laser therapy (688 nm and 785 nm) morphologic study in capuchin monkeys

The aim of this study was to evaluate the hypothesis that low-level laser therapy (LLLT) 688 nm and 785 nm accelerate dentin barrier formation and repair process after traumatic pulp exposure. The sample consisted of 45 premolars of capuchin monkeys (Cebus apella) with pulp exposure Class V cavities. All premolars were treated with calcium hydroxide (Ca(OH)(2)), divided in groups of 15 teeth each, and analyzed on 7(th), 25(th), and 60(th) day. Group GI - only Ca(OH)(2), GIF- laser 688 nm, and GIII - laser 785 nm. Laser beam was used in single and punctual dose with the parameters: continuous, 688 nm and 785 nm wavelength, tip`s area of 0.00785 cm(2), power 50 mW, application time 20 s, dose 255 J/cm(2), energy 2 J. Teeth were capped with Ca(OH)(2), Ca(OH)(2) cement and restored with amalgam. All groups presented pulp repair. On 25(th) day the thickness of the formed dentin barrier was different between the groups GI and GII (p < 0.05) and between groups GI and GIII (p < 0.01). On 60(th) day there was difference between GI and GIII (p < 0.01). It may be concluded that, LLLT 688 nm and 785 nm accelerated dentin barrier formation and consequently pulp repair process, with best results using infrared laser 785 nm. (c) 2009 by Astro Ltd. Published exclusively by WLLEY-VCH Verlag GmbH & Co. KGaA

In vitro evaluation of Cu and Fe bioavailability in cashew nuts by off-line coupled SEC-UV and SIMAAS

In this work Cu and Fe bioavailability in cashew nuts was evaluated using in vitro method. Extractions with simulated gastric and intestinal fluids and dialysis procedures were applied for this purpose. The proteins separation and quantification were performed by size exclusion chromatography (SEC) coupled on-line to ultra-violet (UV) and off-line to simultaneous multielement atomic absorption spectrometry (SIMAAS). The SEC-UV and SIMAAS profiles of the protein fractions obtained by alkaline extraction (NaOH) and precipitation with HCl indicated the presence of high and low molecular weight species in the range between >75 kDa and 9.3 kDa. Almost 83% of Cu and 78% of Fe were extracted during cashew nut digestion and 90% of both elements were dialyzed. With these results it is possible to assume that 75% of Cu and 70% of Fe present in cashew nut could be bioavailable. The SEC-UV and SIMAAS chromatographic profiles obtained after in vitro gastrointestinal digestion reveal that Cu and Fe not dialyzed can be associated to a compound of 9.2 kDa. (C) 2010 Elsevier B.V. All rights reserved.

Bioluminescent sensor for naphthalene in air: Cell immobilization and evaluation with a dynamic standard atmosphere generator

A dynamic atmosphere generator with a naphthalene emission source has been constructed and used for the development and evaluation of a bioluminescence sensor based on the bacteria Pseudomonas fluorescens HK44 immobilized in 2% agar gel (101 cell mL(-1)) placed in sampling tubes. A steady naphthalene emission rate (around 7.3 nmol min(-1) at 27 degrees C and 7.4 mLmin(-1) of purified air) was obtained by covering the diffusion unit containing solid naphthalene with a PTFE filter membrane. The time elapsed from gelation of the agar matrix to analyte exposure (""maturation time"") was found relevant for the bioluminescence assays, being most favorable between 1.5 and 3 h. The maximum light emission, observed after 80 min, is dependent on the analyte concentration and the exposure time (evaluated between 5 and 20 min), but not on the flow rate of naphthalene in the sampling tube, over the range of 1.8-7.4 nmol min(-1). A good linear response was obtained between 50 and 260 nmol L-1 with a limit of detection estimated in 20 nmol L-1 far below the recommended threshold limit value for naphthalene in air. (c) 2008 Elsevier B.V. All rights reserved.

Evaluation of the light polymerization efficiency of copolymers used in dental formulations by differential scanning calorimetry

Different compositions of visible-light-curable triethylene glycol dimethacrylate/bisglycidyl methacrylate copolymers used in dental resin formulations were prepared through copolymerization photoinitiated by a camphorquinone/ethyl 4-dimethylaminobenzoate system irradiated with an Ultrablue IS light-emitting diode. The obtained copolymers were evaluated with differential scanning calorimetry. From the data for the heat of polymerization, before and after light exposure, obtained from exothermic differential scanning calorimetry curves, the light polymerization efficiency or degree of conversion of double bonds was calculated. The glass-transition temperature also was determined before and after photopolymerization. After the photopolymerization, the glass-transi-tion temperature was not well defined because of the breadth of the transition region associated with the properties of the photocured dimethacrylate. The glass-transition temperature after photopolymerization was determined experimentally and compared with the values determined with the Fox equation. In all mixtures, the experimental value was lower than the calculated value. Scanning electron microscopy was used to analyze the morphological differences in the prepared copolymer structures. (C) 2007 Wiley Periodicals, Inc.

Evaluation of Postpolymerization as a Function of the Storage Time of Triethylene Glycol Dimethacrylate/2,2-Bis[4-(2-Hydroxy-3-Methacryloxy-Prop-1-Oxy)-Phenyl]-propane Bisphenyl-alpha-Glycidyl Ether Dimethacrylate Copolymers Used in Dental Resins by Differential Scanning Calorimetry and Dynamic Mechanical Analysis

The aim of this work was to evaluate the effect of the storage time on the thermal properties of triethylene glycol dimethacrylate/2,2-bis[4-(2-hydroxy-3-methacryloxy-prop-1-oxy)-phenyl]propane bisphenyl-alpha-glycidyl ether dimethacrylate (TB) copolymers used in formulations of dental resins after photopolymerization. The TB copolymers were prepared by photopolymerization with an Ultrablue IS light-emitting diode, stored in the dark for 160 days at 37 degrees C, and characterized with differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and Fourier transform infrared spectroscopy with attenuated total reflection. DSC curves indicated the presence of an exothermic peak, confirming that the reaction was not completed during the photopolymerization process. This exothermic peak became smaller as a function of the storage time and was shifted at higher temperatures. In DMA studies, a plot of the loss tangent versus the temperature initially showed the presence of two well-defined peaks. The presence of both peaks confirmed the presence of residual monomers that were not converted during the photopolymerization process. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 112: 679-684, 2009

Application of chemometric methods in the evaluation of chemical and spectroscopic data on organic matter from Oxisols in sewage sludge applications

Chemometric methods can contribute to soil research by permitting the extraction of more information from the data. The aim of this work was to use Principal Component Analysis to evaluate data obtained through chemical and spectroscopic methods on the changes in the humification process of soil organic matter from two tropical soils after sewage sludge application. In this case, humic acids extracted from Typic Eutrorthox and Typic Haplorthox soils with and without sewage sludge application for 7 consecutive years were studied. The results obtained for all of the samples and methods showed two clusters: samples extracted from the two soil types. These expected results indicated the textural difference between the two soils was more significant than the differences between treatments (control and sewage sludge application) or between depths. In this case, an individual chemometric treatment was made for each type of soil. It was noted that the characterization of the humic acids extracted from soils with and without sewage sludge application after 7 consecutive years using several methods supplies important results about changes in the humification degree of soil organic matter, These important result obtained by Principal Component Analysis justify further research using these methods to characterize the changes in the humic acids extracted from sewage sludge-amended soils. (C) 2009 Elsevier B.V. All rights reserved.

An Evaluation of”Middle Ages Dead or Live?”The first interactive exhibition at the National Museum of History

This is a study conducted at, and for, the National Museum of History in Stockholm. The aim of the study was to confirm or disconfirm the hypothesis that visitors in a traditional museum environment might not take part in interactivity in an interactive exhibition. And if they do the visitors might skip the texts and objects on display. To answer this and other questions a multiple method was used. Both non participant observations and exit interviews were conducted. After a description of the interactive exhibits, theory of knowledge and learning is presented before the gathered data is presented. All together 443 visitors were observed. In the observations the visitors were timed on how much time they spent in the room, the time spent on the interactivity, texts and objects. In the 40 interviews information about visitors’ participation in the interactivity was gathered. What interactivity the visitor found easiest, hardest, funniest and most boring.The result did not confirm the hypothesis. All kinds of visitors, children and adults, participated in the interactivities. The visitors took part in the texts and objects and the interactive exhibits.

LASER-TESTING RIG : Measurement System for evaluation of Shape of concentrating reflector for solar collector Absolicon X10

This Thesis project is a part of the all-round automation of production of concentrating solar PV/T systems Absolicon X10. ABSOLICON Solar Concentrator AB has been invented and started production of the prospective solar concentrated system Absolicon X10. The aims of this Thesis project are designing, assembling, calibrating and putting in operation the automatic measurement system intended to evaluate the shape of concentrating parabolic reflectors.On the basis of the requirements of the company administration and needs of real production process the operation conditions for the Laser testing rig were formulated. The basic concept to use laser radiation was defined.At the first step, the complex design of the whole system was made and division on the parts was defined. After the preliminary conducted simulations the function and operation conditions of the all parts were formulated.At the next steps, the detailed design of all the parts was conducted. Most components were ordered from respective companies. Some of the mechanical components were made in the workshop of the company. All parts of the Laser-testing rig were assembled and tested. Software part, which controls the Laser-testing rig work, was created on the LabVIEW basis. To tune and test software part the special simulator was designed and assembled.When all parts were assembled in the complete system, the Laser-testing rig was tested, calibrated and tuned.In the workshop of Absolicon AB, the trial measurements were conducted and Laser-testing rig was installed in the production line at the plant in Soleftea.

Universal Experimental Measurement System «Sun-Walker» : Automotive measurement system for the evaluation of the solar irradiation distribution for the tests of the solar concentrated systems.

This Thesis project is a part of the research conducted in Solar industry. ABSOLICON Solar Concentrator AB has invented and started production of the prospective solar concentrated system Absolicon X10. The aims of this Thesis project are designing, assembling, calibrating and putting in operation the automatic measurement system intended to evaluate distribution of density of solar radiation in the focal line of the concentrated parabolic reflectors and to measure radiation from the artificial source of light being a calibration-testing tool.On the basis of the requirements of the company’s administration and needs of designing the concentrated reflectors the operation conditions for the Sun-Walker were formulated. As the first step, the complex design of the whole system was made and division on the parts was specified. After the preliminary conducted simulation of the functions and operation conditions of the all parts were formulated.As the next steps, the detailed design of all the parts was made. Most components were ordered from respective companies. Some of the mechanical components were made in the workshop of the company. All parts of the Sun-Walker were assembled and tested. The software part, which controls the Sun-Walker work and conducts measurements of solar irradiation, was created on the LabVIEW basis. To tune and test the software part, the special simulator was designed and assembled.When all parts were assembled in the complete system, the Sun-Walker was tested, calibrated and tuned.

Performance Evaluation of Different PV-Array Configurations under Weak Light Conditions and Partial Shadings

The paper analyses empirical performance data of five commercial PV-plants in Germany. The purpose was on one side to investigate the weak light performance of the different PV-modules used. On the other hand it was to quantify and compare the shading losses of different PV-array configurations. The importance of this study relies on the fact that even if the behavior under weak light conditions or the shading losses might seem to be a relatively small percentage of the total yearly output; in projects where a performance guarantee is given, these variation can make the difference between meeting or not the conditions.When analyzing the data, a high dispersion was found. To reduce the optical losses and spectral effects, a series of data filters were applied based on the angle of incidence and absolute Air Mass. To compensate for the temperature effects and translate the values to STC (25°C), five different methods were assessed. At the end, the Procedure 2 of IEC 60891 was selected due to its relative simplicity, usage of mostly standard parameters found in datasheets, good accuracy even with missing values, and its potential to improve the results when the complete set of inputs is available.After analyzing the data, the weak light performance of the modules did not show a clear superiority of a certain technology or technology group over the others. Moreover, the uncertainties in the measurements restrictive the conclusiveness of the results.In the partial shading analysis, the landscape mounting of mc-Si PV-modules in free-field showed a significantly better performance than the portrait one. The cross-table string using CIGS modules did not proved the benefits expected and performed actually poorer than a regular one-string-per-table layout. Parallel substrings with CdTe showed a proper functioning and relatively low losses. Among the two product generations of CdTe analyzed, none showed a significantly better performance under partial shadings.

PANA V : Evaluation of a Literacy Project

PANA V Evaluation of a Literacy ProjectSUMMARY AND CONCLUSIONSThis evaluation set out to explore the impact of the literacy work carried out through PANA V. It focussed on clarifying effects such as empowerment and poverty reduction in relation to the civil society. Two specific objectives were to evaluate the methodological approach and the didactic materials and to evaluate the sustainability of the project.Although the focus of the evaluation has been PANA V, the project has been evaluated in its context, as one in a series of five projects located in Rwanda ten years after the war and genocide. The conclusion will consider future plans in this field.The evaluator has striven to create a holistic picture of the effects of the project, although the given time for the evaluation was short. Only three weeks were spent in the field study and only ten days in the actual field. Although there were some organisational and logistic problems, as is common when carrying out a study like this in a poor country, many literacy sites were visited and quite many participators were interviewed. The overall impression from the study is overwhelmingly positive. So many people commit themselves in this task of teaching Rwandans reading, writing and numeracy. Despite harsh conditions learners strive to learn and group leaders devote themselves to the task. Many leaders on different levels try their very best to manage their difficult and demanding task. The main objective was to explore the impact of the project on poverty reduction, particularly on empowerment and strategies for everyday life. Women were to be regarded particularly. From the results it is clear that the project has a strong, positive impact both on poverty reduction and empowerment of marginalised groups. Among those who have benefited from the alphabetisation are mainly women. Unfortunately, when it comes to leaders in PANA, who may also be said to have benefited from the project, only a small minority is women. This is something that is recommended that it be reconsidered inside the organisation. As a majority of the targeted learners are women, and as the economic and social situation of women in Rwanda is generally weak, this is a question that I recommend the Pentesostal church and ADEPR to look particularly into. With many women being single breadwinners of their households, it is important that also women get access to positions that may bring benefits of different kind.It is also clear that the project has positive effects for the civil society. In the present situation in Rwanda, during the process of reconciliation and rapid progress, basic education for the poor majority is a democratic issue. In a country with a plethora of internet-cafés in the capital and a small minority that use cars and mobile-telephones to communicate nation-wide, it is of outmost importance that the majority acquires basic education, of which literacy is a central part. To strengthen the civil society in Rwanda literacy is important. One central issue is then that Rwanda develops toward becoming a country where literacy is used for the benefit of the citizens and it is a democratic issue that all citizens get an opportunity to participate. Crucial for this is that strong efforts are put into primary schools nation-wide. Literacy projects for adults, like PANA, may only complement these efforts, but they constitute important and necessary complements. Other relevant ways to promote literacy are campaigns in Radio and TV and through cultural events such as festivals, music and theatre. News papers, magazines and books are natural parts of such campaigns as well as adult education. As stated under the results not much can be said about the didactics in this evaluation. On the whole the methodology and the materials fill their function well and receive a high reputation. As people learn to read and write under very simple conditions, obviously the approach is appropriate. A few suggestions may be given from the study:•Focus groups leaders’ attention on clearness, that they show very clearly what is to be read. Good structuring is probably of great importance for many learners.•Make clear what is tested in the tests and consider the possibility to use a holistic test that would be more congruent with the methodology. The possibility to use only one grade, pass, would enable a more practical test, such as reading a short, relevant text, writing something relevant and solving practical mathematic problems. Avoid tests that demand school knowledge.•Avoid using methaphors such as “fight against illiteracy” and connections between illiteracy/literacy and darkness/light. It is not true that illiteracy causes bad things and that literacy only brings good. •Be prepared that it may be more difficult in the future to achieve the goals as it may be the case that the early learners where the ones who achieved easily. The goal of “literacy in six month” in PANA will probably hold only for some learners but also those who do not manage in six months need literacy skills.A third objective was to secure sustainability. As for sustainability of the project in itself, and of the literacy process, the main conclusion is that there is a good potential. The commitment and devotedness among many involved in PANA proves good. One weakness is individual leaders in ADEPR who do not see this as an important task for the Pentecostal church in Rwanda. Other weaknesses are the unwillingness to mention explicitly the wish, for example among group leaders, to get some kind of incentive and the fear of loosing believers by cooperation with other organisations. A higher degree of transparency in this issue would probably solve some irritations and tensions.As for the sustainability of the literacy skills much may be done to improve. The acquired skills seem to be comparably relevant. The level achieved, and the level tested, may be defined as basic literacy skills, consisting of basic reading, writing and numeracy skills. However, these skills are very restricted and there is a high risk that the skills will decline, which means that there is a high risk that people will forget how to read and write because of lack of exercising. From these conclusions a few suggestions for future development will be given.

Debt management in Brazil: evaluation of the Real Plan and challenges ahead

The Brazilian domestic debt has posed two challenges to policy-makers: it has grown very fast and its maturity is extremely short. This has prompted fears that a default or a compulsory lengthening scheme would be imposed. Here, we analyse the domestic public debt management experience in Brazil, searching for policy prescriptions for the next few years. After briefiy reviewing the recent domestic public debt history, we decompose the large rise in federal bonded debt during 1995-2000, searching for its macroeconomic causes. The main culprits are the extremely high interest payments-which, unti11998, were caused by the weak fiscal stance and the quasi-fixed exchange-rate regime; and since 1999, by the impact ofthe currency depreciation On the dollar-indexed and the externai debt-, and the accumulation of assets of doubtful value, much of which may have to be written off in the future. Simulation exercises of the net debt path for the near future underscore the importance of a tighter fiscal stance to prevent the debt-GDP ratio from growing further. Given the need to quickly lengthen the debt maturity, our main policy advice is to foster, and rely more on, infiation-linked bonds.

An evaluation of the Business Model Canvas by technology-oriented startups in Brazil : a qualitative study about the usage of the tool by Brazilian entrepreneurs

The following paper was conducted with the support of several entrepreneurs and startups from Brazil. The aim of the research was to find out which impact the Business Model Canvas, further abbreviated as BMC, has on technology-oriented startups in Brazil. The first step of the study was identify some general concepts of entrepreneurship, as well as the conditions and environment of the country. Afterwards, it was focused on defining and comparing different business model tools and concepts to the BMC. After the literature review and meeting with several professionals in the area of entrepreneurship and startups, a questionnaire was formulated in order to conduct the qualitative study and identify the main impact of the tool. The questionnaire was answered by ten startups. In order to check the validity and credibility of the research outcomes, theory and investigator triangulation was used. As a result, the usage of the BMC could be evaluated by obtaining the outcomes and the theory, which showed that Brazilian tech startups are using Osterwalder’s model for the reason of idea creation and testing, validating and pivoting their business model. Interestingly, the research revealed that the entrepreneurs are using the tool often not in the traditional way of printing it, but rather applying it as a thinking approach. Besides, the entrepreneurs are focusing mostly on developing a strong Value Proposition, Customer Segment and sustainable Revenue Streams, while afterwards the remaining building blocks are built. Moreover, the research showed that the startups are using also other concepts, such as the Customer Development Process or Build-Measure-Learn Feedback Loop. These methodologies are often applied together with the BMC and helps to identify the most sustainable components of the business idea. Keywords: Business

Development and pharmacological evaluation of ropivacaine-2-hydroxypropyl-beta-cyclodextrin inclusion complex

Ropivacaine (RVC) is an enantiomerically pure local anesthetic (LA) largely used in surgical procedures, which presents physico-chemical and therapeutic properties similar to those of bupivacaine (BPV), but associated to less systemic toxicity This study focuses on the development and pharmacological evaluation of a RVC in 2-hydroxypropyl-beta-cyclodextrin (HP-P-CD) inclusion complex. Phase-solubility diagrams allowed the determination of the association constant between RVC and HP-beta-CD (9.46 M-1) and showed an increase on RVC solubility upon complexation. Release kinetics revealed a decrease on RVC release rate and reduced hemolytic effects after complexation. (onset at 3.7 mM and 11.2 mM for RVC and RVCHP-beta-CD, respectively) were observed. Differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and X-ray analysis (X-ray) showed the formation and the morphology of the complex. Nuclear magnetic resonance (NMR) and job-plot experiments afforded data regarding inclusion complex stoichiometry (1:1) and topology. Sciatic nerve blockade studies showed that RVCHP-beta-CD was able to reduce the latency without increasing the duration of motor blockade, but prolonging the duration and intensity of the sensory blockade (p < 0.001) induced by the LA in mice. These results identify the RVCHP-beta-CD complex as an effective novel approach to enhance the pharmacological effects of RVC, presenting it as a promising new anesthetic formulation. (c) 2007 Elsevier B.V All rights reserved.

Stability and Local Toxicity Evaluation of a Liposomal Prilocaine Formulation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)