Multiple causes of the evolution of dispersal in metapopulations

Abstract This work investigates the outcome of the interaction of the multiple causes of selection acting on dispersal in metapopulations. Dispersal, defined here as the ability of individuals to move out of their natal population to reproduce in an other one, has three main causes. First, population variability, as caused by random population extinctions, induces high incentives to disperse through the probability to recolonize an empty population and thus to escape competition for space. This adds to the second cause, kin competition avoidance where individuals in a crowded patch will benefit from the release of competition with relatives caused by dispersal. Dispersal may thus be viewed as an altruistic act. Third, dispersal might evolve as a strategy of avoiding inbred matings which are expected to bear fitness costs due to the presence of a mutation load. The interaction of inbreeding avoidance and kin competition is explored in chapter 2. Conditions conducive to the establishment of a high relatedness within population are expected to induce high dispersal through both kin competition avoidance and inbreeding avoidance. However, the dynamics of inbreeding depression is bound to depend on the level of gene flow as well as on the deleterious mutation parameters. Mutations more prone to settle a high level of inbreeding depression will select for increased dispersal. Chapter 3 investigates the effect of the mating system on the joint dynamics of dispersal and inbreeding depression. Higher inbreeding rates as those found in various mating systems lead to a more efficient purge of the deleterious mutations. However, this decrease in the costs of inbreeding are usually accompanied by a higher within deme relatedness which balances the decreased effect of inbreeding avoidance on the evolution of dispersal. Finally, population turnover, as found in most natural populations has a dual effect on dispersal. Indeed, it increases dispersal by the increased probability of winning a breeding slot in extinct demes it creates but, on the other hand, it counter-selects for dispersal through the slow establishment of unsaturated demic conditions which contribute to lower the local competition for space. Résumé Ce travail se propose d'étudier les effets conjoints des multiples causes de l'évolution de la dispersion en métapopulation. La dispersion, définie ici comme étant la capacité de quitter sa population d'origine pour se reproduire dans une antre population, possède trois principales causes. Premièrement, l'extinction aléatoire de populations sélectionne pour plus de dispersion car elle augmente la Probabilité de recoloniser un patch éteint et donc d'échapper à la compétition locale. La seconde cause, l'évitement de la compétition de parentèle, sélectionne pour plus de dispersion par les bénéfices qu'elle apporte par diminution de la compétition entre individus apparentés. Troisièmement, la dispersion évolue "comme stratégie d'évitement de la dépression de consanguinité présente dans des petites populations isolées. L'interaction entre l'évitement de la consanguinité et de la compétition de parentèle est étudiée dans le chapitre 2. Les conditions conduisant à l'établissement d'un fort apparentement à l'intérieur des populations sont celles qui génèrent le plus de sélection pour la dispersion. Cependant, la dynamique de la dépression de consanguinité est dépendante de la dispersion entre populations ainsi que des paramètres des mutations délétères. Les mutations créant le plus de dépression de consanguinité sont celles qui sélectionneront le plus pour de la dispersion. Le chapitre 3 s'intéresse aux effets du système de reproduction sur la dynamique conjointe du fardeau de mutation et de la dispersion. La purge des mutations délétère étant plus sévère dans des conditions de forte consanguinité, elle diminue les coûts de la consanguinité mais est habituellement accompagné par une augmentation de l'apparentement et donc l'effet peut être neutre sur la dispersion. Finalement, le turnover de populations a un effet dual sur la dispersion. La dispersion est sélectionnée par l'augmentation de la probabilité de gagner une place de reproduction dans des patchs éteints mais elle est également contre sélectionnée par la désaturation des patchs causée par l'extinction et la diminution de la compétition pour l'espace qui intervient dans ce cas.

Trabecular bone score (TBS) the new parameter of 2D texture analysis for the evaluation of 3D bone micro architecture status

X-ray is a technology that is used for numerous applications in the medical field. The process of X-ray projection gives a 2-dimension (2D) grey-level texture from a 3- dimension (3D) object. Until now no clear demonstration or correlation has positioned the 2D texture analysis as a valid indirect evaluation of the 3D microarchitecture. TBS is a new texture parameter based on the measure of the experimental variogram. TBS evaluates the variation between 2D image grey-levels. The aim of this study was to evaluate existing correlations between 3D bone microarchitecture parameters - evaluated from μCT reconstructions - and the TBS value, calculated on 2D projected images. 30 dried human cadaveric vertebrae were acquired on a micro-scanner (eXplorer Locus, GE) at isotropic resolution of 93 μm. 3D vertebral body models were used. The following 3D microarchitecture parameters were used: Bone volume fraction (BV/TV), Trabecular thickness (TbTh), trabecular space (TbSp), trabecular number (TbN) and connectivity density (ConnD). 3D/2D projections has been done by taking into account the Beer-Lambert Law at X-ray energy of 50, 100, 150 KeV. TBS was assessed on 2D projected images. Correlations between TBS and the 3D microarchitecture parameters were evaluated using a linear regression analysis. Paired T-test is used to assess the X-ray energy effects on TBS. Multiple linear regressions (backward) were used to evaluate relationships between TBS and 3D microarchitecture parameters using a bootstrap process. BV/TV of the sample ranged from 18.5 to 37.6% with an average value at 28.8%. Correlations' analysis showedthat TBSwere strongly correlatedwith ConnD(0.856≤r≤0.862; p<0.001),with TbN (0.805≤r≤0.810; p<0.001) and negatively with TbSp (−0.714≤r≤−0.726; p<0.001), regardless X-ray energy. Results show that lower TBS values are related to "degraded" microarchitecture, with low ConnD, low TbN and a high TbSp. The opposite is also true. X-ray energy has no effect onTBS neither on the correlations betweenTBS and the 3Dmicroarchitecture parameters. In this study, we demonstrated that TBS was significantly correlated with 3D microarchitecture parameters ConnD and TbN, and negatively with TbSp, no matter what X-ray energy has been used. This article is part of a Special Issue entitled ECTS 2011. Disclosure of interest: None declared.

The relationships of stress, health and wellbeing among workers

The precise relationship between the positive psychological state of work (i.e. engagement ) and the negative psychological state (i.e. burnout) has recently received research attention. Some view these as opposite states on the same similar continuum, while others take the position that they represent different biobehavioral spheres. This study expands our knowledge of the phenomenta engagement and burnout by analyzing their separate and joint manifestations. Using a sample of 2094 nurses, respondents were analyzed to determine the configuration of antecedents leading to separate and joint states of engagement and burnout, the configuration of engagement and burnout leading to mental, physical and organizational outcomes, and the relationship between engagement, bornout, and risk of metabolic syndrome. The study found that while both work engagement and burnout are highly correlated to health and organizational outcomes, the relative statistical power of burnout has a greater direct effect on health. It is important for workers and managers to adress the sources of burnout before addressing the positive psychological aspects of worker engagement.

Predictors of return to work after a knee injury in patients hospitalized in vocational rehabilitation

Introduction.- Knee injuries are frequent in a young and active population. Most of the patients resume their professional activity but few studies were interested in factors that predict a return to work. The aim of this study is to identify these predictors from a large panel of bio-psychosocial variables. We postulated that the return to work 3 months and 2 years after discharge is mostly predicted by psychosocial variables.Patients and methods.- Prospective study, patients hospitalized for a knee injury. Variables measured: the abbreviated injury score (AIS) for the gravity of the injuries, analog visual scale for the intensity of pain, INTERMED for the bio-psychosocial complexity, SF-36 for the quality of life, HADs for the anxiety/depression symptoms and IKDC score for the knee function. Univariate logistic regressions, adjusted for age and gender, were performed in order to predict return to work.Results.- One hundred and twenty-six patients hospitalized during 8 months after the accident were included into this prospective study. A total of 73 (58%) and 75 (59%) questionnaires were available after 3 months and 2 years, respectively. The SF-36 pain was the sole predictor of return to work at 3 months (odds Ratio 1.06 [1.02-1.10], P = 0.01; for a one point increase) and 2 years (odds Ratio 1.06 [1.02-1.10], P = 0.01). At three months, other factors are SF-36 (physic sub-scale), IKDC score, the presence of a work contract and the presence of litigation. The bio-psychosocial complexity, the presence of depressive symptoms predicts the return to work at two years.Discussion.- Our working hypothesis was partially confirmed: some psychosocial factors (i.e. depressive symptoms, work contract, litigation, INTERMED) predict the return to work but the physical health and the knee function, perceived by the patient, are also correlated. Pain is the sole factor isolated at both times (i.e. 3 months and 2 years) and, consequently, appears a key element in the prediction of the return to work. Some factors are accessible to the rehabilitation program but only if an interdisciplinary approach is performed.

A functional and structural study of the major metalloprotease secreted by the pathogenic fungus Aspergillus fumigatus.

Fungalysins are secreted fungal peptidases with the ability to degrade the extracellular matrix proteins elastin and collagen and are thought to act as virulence factors in diseases caused by fungi. Fungalysins constitute a unique family among zinc-dependent peptidases that bears low sequence similarity to known bacterial peptidases of the thermolysin family. The crystal structure of the archetype of the fungalysin family, Aspergillus fumigatus metalloprotease (AfuMep), has been obtained for the first time. The 1.8 Å resolution structure of AfuMep corresponds to that of an autoproteolyzed proenzyme with separate polypeptide chains corresponding to the N-terminal prodomain in a binary complex with the C-terminal zinc-bound catalytic domain. The prodomain consists of a tandem of cystatin-like folds whose C-terminal end is buried into the active-site cleft of the catalytic domain. The catalytic domain harbouring the key catalytic zinc ion and its ligands, two histidines and one glutamic acid, undergoes a conspicuous rearrangement of its N-terminal end during maturation. One key positively charged amino-acid residue and the C-terminal disulfide bridge appear to contribute to its structural-functional properties. Thus, structural, biophysical and biochemical analysis were combined to provide a deeper comprehension of the underlying properties of A. fumigatus fungalysin, serving as a framework for the as yet poorly known metallopeptidases from pathogenic fungi.

Uncorrelatedness in growing networks with preferential survival of nodes

The emergence of uncorrelated growing networks is proved when nodes are removed either uniformly or under the preferential survival rule recently observed in the World Wide Web evolution. To this aim, the rate equation for the joint probability of degrees is derived, and stationary symmetrical solutions are obtained, by passing to the continuum limit. When a uniformly random removal of extant nodes and linear preferential attachment of new nodes are at work, we prove that the only stationary solution corresponds to uncorrelated networks for any removal rate r ∈ (0,1). In the more general case of preferential survival of nodes, uncorrelated solutions are also obtained. These results generalize the uncorrelatedness displayed by the (undirected) Barab´asi-Albert network model to models with uniformly random and selective (against low degrees) removal of nodes

Compendium of projects in the European nanosafety cluster

The demand for research in the area of safety health and environmental management of nanotechnologies is present since a decade and identified by several landmark reports and studies. It is not the intention of this compendium to report on these as they are widely available. It is also not the intention to publish scientific papers and research results as this task is covered by scientific conferences and the peer reviewed press. The intention of the compendium is to bring together researchers, create synergy in their work, and establish links and communication between them mainly during the actual research phase before publication of results. Towards this purpose we find useful to give emphasis to communication of projects strategic aims, extensive coverage of specific work objectives and of methods used in research, strengthening human capacities and laboratories infrastructure, supporting collaboration for common goals and joint elaboration of future plans, without compromising scientific publication potential or IP Rights. These targets are far from being achieved with the publication in its present shape. We shall continue working, though, and hope with the assistance of the research community to make significant progress. We would like to stress that this sector is under development and progressing very fast, which might make some of the statements outdated or even obsolete. Nevertheless it is intended to provide a basis for the necessary future developments. [Ed.]

A comparison between joint coordinate system and attitude vector for multi-segment foot kinematics.

The joint angles of multi-segment foot models have been primarily described using two mathematical methods: the joint coordinate system and the attitude vector. This study aimed to determine whether the angles obtained through these two descriptors are comparable, and whether these descriptors have similar sensitivity to experimental errors. Six subjects walked eight times on an instrumented walkway while the joint angles among shank, hindfoot, medial forefoot, and lateral forefoot were measured. The angles obtained using both descriptors and their sensitivity to experimental errors were compared. There was no overall significant difference between the ranges of motion obtained using both descriptors. However, median differences of more than 6° were noticed for the medial-lateral forefoot joint. For all joints and rotation planes, both descriptors provided highly similar angle patterns (median correlation coefficient: R>0.90), except for the medial-lateral forefoot angle in the transverse plane (median R=0.77). The joint coordinate system was significantly more sensitive to anatomical landmarks misplacement errors. However, the absolute differences of sensitivity were small relative to the joints ranges of motion. In conclusion, the angles obtained using these two descriptors were not identical, but were similar for at least the shank-hindfoot and hindfoot-medial forefoot joints. Therefore, the angle comparison across descriptors is possible for these two joints. Comparison should be done more carefully for the medial-lateral forefoot joint. Moreover, despite different sensitivities to experimental errors, the effects of the experimental errors on the angles were small for both descriptors suggesting that both descriptors can be considered for multi-segment foot models.

Anharmonicity contributions to the vibrational second hyperpolarizability of conjugated oligomers

Restricted Hartree-Fock 6-31G calculations of electrical and mechanical anharmonicity contributions to the longitudinal vibrational second hyperpolarizability have been carried out for eight homologous series of conjugated oligomers - polyacetylene, polyyne, polydiacetylene, polybutatriene, polycumulene, polysilane, polymethineimine, and polypyrrole. To draw conclusions about the limiting infinite polymer behavior, chains containing up to 12 heavy atoms along the conjugated backbone were considered. In general, the vibrational hyperpolarizabilities are substantial in comparison with their static electronic counterparts for the dc-Kerr and degenerate four-wave mixing processes (as well as for static fields) but not for electric field-induced second harmonic generation or third harmonic generation. Anharmonicity terms due to nuclear relaxation are important for the dc-Kerr effect (and for the static hyperpolarizability) in the σ-conjugated polymer, polysilane, as well as the nonplanar π systems polymethineimine and polypyrrole. Restricting polypyrrole to be planar, as it is in the crystal phase, causes these anharmonic terms to become negligible. When the same restriction is applied to polymethineimine the effect is reduced but remains quantitatively significant due to the first-order contribution. We conclude that anharmonicity associated with nuclear relaxation can be ignored, for semiquantitative purposes, in planar π-conjugated polymers. The role of zero-point vibrational averaging remains to be evaluated

Induction of innate immune responses through Nalp3 inflammasome sensing of asbestos and silica

The inhalation of airborne pollutants such as asbestos or silica is linked to inflammation of the lung, fibrosis and lung cancer. How the presence of pathogenic dust is recognised, and how chronic inflammatory diseases are triggered are poorly understood. We will se show that asbestos and silica are sensed by the Nalp3 inflammasome, whose subsequent activation leads to IL-1b secretion. Inflammasome activation is triggered by reactive oxygen species, which are generated by a NADPH oxidase upon particle phagocytosis. In a model of asbestos inhalation, Nalp3_/_ mice showed diminished recruitment of inflammatory cells to the lungs, paralleled by lower cytokine production. Our findings implicate the Nalp3 inflammasome in particulate matter-related pulmonary diseases and support its role as a major proinflammatory ''danger" receptor.

Assessment of angiotensin II receptor blockade in humans using a standardized angiotensin II receptor-binding assay.

An in vitro angiotensin II (AngII) receptor-binding assay was developed to monitor the degree of receptor blockade in standardized conditions. This in vitro method was validated by comparing its results with those obtained in vivo with the injection of exogenous AngII and the measurement of the AngII-induced changes in systolic blood pressure. For this purpose, 12 normotensive subjects were enrolled in a double-blind, four-way cross-over study comparing the AngII receptor blockade induced by a single oral dose of losartan (50 mg), valsartan (80 mg), irbesartan (150 mg), and placebo. A significant linear relationship between the two methods was found (r = 0.723, n = 191, P<.001). However, there exists a wide scatter of the in vivo data in the absence of active AngII receptor blockade. Thus, the relationship between the two methods is markedly improved (r = 0.87, n = 47, P<.001) when only measurements done 4 h after administration of the drugs are considered (maximal antagonist activity observed in vivo) suggesting that the two methods are equally effective in assessing the degree of AT-1 receptor blockade, but with a greatly reduced variability in the in vitro assay. In addition, the pharmacokinetic/pharmacodynamic analysis performed with the three antagonists suggest that the AT-1 receptor-binding assay works as a bioassay that integrates the antagonistic property of all active drug components of the plasma. This standardized in vitro-binding assay represents a simple, reproducible, and precise tool to characterize the pharmacodynamic profile of AngII receptor antagonists in humans.

Dynamic estimation of three-dimensional cerebrovascular deformation from rotational angiography

Purpose: The objective of this study is to investigate the feasibility of detecting and quantifying 3D cerebrovascular wall motion from a single 3D rotational x-ray angiography (3DRA) acquisition within a clinically acceptable time and computing from the estimated motion field for the further biomechanical modeling of the cerebrovascular wall. Methods: The whole motion cycle of the cerebral vasculature is modeled using a 4D B-spline transformation, which is estimated from a 4D to 2D + t image registration framework. The registration is performed by optimizing a single similarity metric between the entire 2D + t measured projection sequence and the corresponding forward projections of the deformed volume at their exact time instants. The joint use of two acceleration strategies, together with their implementation on graphics processing units, is also proposed so as to reach computation times close to clinical requirements. For further characterizing vessel wall properties, an approximation of the wall thickness changes is obtained through a strain calculation. Results: Evaluation on in silico and in vitro pulsating phantom aneurysms demonstrated an accurate estimation of wall motion curves. In general, the error was below 10% of the maximum pulsation, even in the situation when substantial inhomogeneous intensity pattern was present. Experiments on in vivo data provided realistic aneurysm and vessel wall motion estimates, whereas in regions where motion was neither visible nor anatomically possible, no motion was detected. The use of the acceleration strategies enabled completing the estimation process for one entire cycle in 5-10 min without degrading the overall performance. The strain map extracted from our motion estimation provided a realistic deformation measure of the vessel wall. Conclusions: The authors' technique has demonstrated that it can provide accurate and robust 4D estimates of cerebrovascular wall motion within a clinically acceptable time, although it has to be applied to a larger patient population prior to possible wide application to routine endovascular procedures. In particular, for the first time, this feasibility study has shown that in vivo cerebrovascular motion can be obtained intraprocedurally from a 3DRA acquisition. Results have also shown the potential of performing strain analysis using this imaging modality, thus making possible for the future modeling of biomechanical properties of the vascular wall.

Defining the Attributes of Good In-Service Portland Cement Concrete Pavements, December 2004

Much of the current research in portland cement concrete (PCC) pavements deals with the analysis of early pavement life failures and seeks to find ways to prevent those from reoccurring. The Long Term Pavement Performance (LTPP) portion of the Strategic Highway Research Program (SHRP) has identified some of the key factors in designing and building new PCC pavements. This statement will build on the Iowa Highway Research Board (IHRB) project TR-463, Field Performance Study of Past Iowa Pavement Research: A Look Back. In Iowa and across the nation, there are multiple pavements that were built more than 20 years ago that have been and are continuing to provide very good service to the public. They are found on both state and local routes and in both low and high traffic volume areas. There is a need to learn what went into those pavements, from the subgrade through the surface, that makes them perform so well. The purpose of this research project was to conduct a scoping study that could be used to evaluate the need for additional research to study the attributes of well-performing concrete pavements. The concept of zero-maintenance jointed plain concrete pavements” was iterated in this study for long-lasting, well-performing portland cement concrete pavement sections. The scope of the study was limited to a brief literature survey, pavement performance data collection from many counties, cities, and primary and interstate roads in Iowa, field visits to many selected pavement sites, and analysis of the collected data. No laboratory orfield testing was conducted for this phase of the project. A problem statement with a research plan was created that could be used to guide the second phase of the project.