Pancreatic involvement in co-infection visceral leishmaniasis and HIV: histological and ultrastructural aspects

The involvement of the gastrointestinal tract in the co-infection of HIV and Leishmania is rarely reported. We report the case of an HIV-infected adult man co-infected with a disseminated form of leishmaniasis involving the liver, lymph nodes, spleen and, as a feature reported for the first time in the English literature, the pancreas. Light microscopy showed amastigote forms of Leishmania in pancreatic macrophages and immunohistochemical staining revealed antigens for Leishmania and also for HIV p24. Microscopic and ultrastructural analysis revealed severe acinar atrophy, decreased zymogen granules in the acinar cytoplasm and also nuclear abnormalities such as pyknosis, hyperchromatism and thickened chromatin. These findings might correspond to the histologic pattern of protein-energy malnutrition in the pancreas as shown in our previous study in pancreas with AIDS and no Leishmania. In this particular case, the protein-energy malnutrition may be due to cirrhosis, or, Leishmania or HIV infection or all mixed. We believe that this case represents the morphologic substratum of the protein energy malnutrition in pancreas induced by the HIV infection. Further studies are needed to elucidate these issues.

Análise de Integridade Estrutural de uma Flare Industrial

Para garantir que um equipamento opere com segurança e fiabilidade durante o seu ciclo de vida, desde a sua instalação ao desmantelamento, devem ser realizadas inspeções e/ou monitorizações que, dependendo dos dados recolhidos, podem implicar avaliações Fitness- For-Service (FFS) que definirão a necessidade de reparação ou alteração do equipamento ou das condições processuais. A combinação de inspeção ou monitorização com os melhores procedimentos e técnicas de avaliação atuais fazem sobressair insuficiências dos procedimentos mais antigos. Usando métodos mais avançados de avaliação, validados e suportados através de uma vasta experiência de campo, pode-se agora avaliar defeitos nos ativos (equipamentos) e determinar a adequação ao serviço com uma análise FFS. As análises FFS tornaram-se cada vez mais aceites em toda a indústria ao longo dos últimos anos. A norma API 579 - 1/ASME FFS-1: 2007 fornece diretrizes para avaliar os tipos de danos que afetam os equipamentos processuais e a norma API RP 571: 2011 descreve os mecanismos de degradação que afetam os equipamentos nas petroquímicas e refinarias, que incluem os danos por corrosão, desalinhamentos, deformações plásticas, laminações, fissuras, entre outros. Este trabalho consiste na análise de Integridade Estrutural de uma Flare Industrial que surgiu da necessidade real de análise do equipamento no âmbito da atividade profissional do candidato. O estudo realizado a nível profissional é de grande abrangência, incluindo a inspeção do equipamento, identificação da falha ou dano, recolha e registo de dados, definição de estratégia de atuação e seleção de técnicas de avaliação da condição para posterior alteração, reparação ou desmantelamento. Na presente dissertação de mestrado em Engenharia Mecânica, Ramo Construções Mecânicas, pretende-se efetuar o estudo aprofundado de uma das etapas de projeto, nomeadamente estudar a causa, avaliar a falha e implicações estruturais ou processuais devido à degradação interior do riser de uma flare, com base numa análise FFS, assumindo a operabilidade em segurança e garantindo resolutas condições de funcionamento. A presente análise FFS tem como finalidade validar ou não a integridade atual (avaliação técnica quantitativa) de modo a conhecer se o item em questão é seguro e confiável para continuar a operar em condições específicas durante um período de tempo determinado, tendo em consideração as condições verificadas no ato de inspeção e especificações de projeto, segundo os itens de verificação de segurança estabelecidos na norma EN 1990:2002/A1:2005/AC:2010 e com base na norma API 579-1/ASME FFS-1: 2007. No âmbito do presente trabalho foram realizadas as seguintes tarefas: - Identificar e analisar os mecanismos de degradação com base na norma API RP 571: 2011, face às condições processuais e geométricas que o equipamento em análise está sujeito de modo a perceber a evolução da degradação estrutural e quais as implicações na sua longevidade. - Avaliar e propor soluções de reparação e ou alterações processuais e ou geométricas do equipamento em análise de modo a permitir a continuidade em funcionamento sem afetar as condições de segurança e por conseguinte minimizar ou evitar o elevado custo económico associado a um novo equipamento e tempo de paragem processual. - Assumir limites estruturais face às condições processuais e ações externas ou adjacentes. - Garantir a segurança e qualidade da vida humana ou meio que o rodeia, do equipamento, das instalações, das infraestruturas envolventes e evitar o colapso económico, quer por motivos processuais, quer indeminizações ou agravamento do prémio do seguro. Verificou-se que os resultados serão a base para as alterações inerentes, tais como reforço estrutural, alteração da geometria do defletor, ajuste no tensionamento dos cabos e controlo da espessura mínima, de modo a alargar o período de vida útil da flare com segurança.

The spectrum of computerized tomography (CT) findings in central nervous system (CNS) infection due to Cryptococcus neoformans var. gattii in immunocompetent children

Cranial CT scans of eleven immunocompetent children with central nervous system (CNS) infection due to Cryptococcus neoformans var. gattii were retrospectively reviewed. These children had an average age of 8.8 years and positive culture for C. n. var. gattii in cerebrospinal fluid. The most common signs and symptoms were headache, fever, nuchal rigidity, nausea and vomiting. No normal cranial CT was detected in any patient. Hypodense nodules were observed in all patients . The remaining scan abnormalities were as follows: nine had diffuse atrophy, six had hydrocephalus, and five had hydrocephalus coexistent with diffuse atrophy.

Intervenção em situações de violência e indisciplina em alunos do ensino básico: Estudo de Caso

A indisciplina e a violência em contexto escolar têm sido uma preocupação social crescente e um assunto amplamente discutido sob diversas perspetivas. Pela complexidade de que se revestem e amplitude de implicações que acarretam, nomeadamente o insucesso escolar e as consequências psicossociais e individuais inerentes, os problemas ao nível do comportamento exigem cada vez mais uma resposta eficaz da comunidade escolar, que vê o seu funcionamento diário ser prejudicado. A acumulação de processos disciplinares evidencia a ineficácia dos sistemas punitivos, pelo que se impõe uma alternativa eficaz. Neste trabalho procuramos apresentar um programa de intervenção comportamental de caráter preventivo e que tem revelado eficácia em diversos contextos escolares. Pelo seu carácter proativo e cientificamente fundamentado, o sistema PBIS (Positive Behavioral Interventions and Supports) apoia-se em princípios da Psicologia Positiva e em dados empíricos e oferece um quadro operacional adaptável a qualquer instituição escolar. O estudo de caso apresentado apresenta intervenções de nível dois e três que, mesmo sem a implementação do nível um de base, revelaram resultados bastante positivos, pelo que há evidências de que seria benéfico para as escolas a introdução destes sistemas no combate diário, constante e preocupante à indisciplina.

Introducing numerical analysis tools in engineering: a Scilab user case in electronics course

Software tools in education became popular since the widespread of personal computers. Engineering courses lead the way in this development and these tools became almost a standard. Engineering graduates are familiar with numerical analysis tools but also with simulators (e.g. electronic circuits), computer assisted design tools and others, depending on the degree. One of the main problems with these tools is when and how to start use them so that they can be beneficial to students and not mere substitutes for potentially difficult calculations or design. In this paper a software tool to be used by first year students in electronics/electricity courses is presented. The growing acknowledgement and acceptance of open source software lead to the choice of an open source software tool – Scilab, which is a numerical analysis tool – to develop a toolbox. The toolbox was developed to be used as standalone or integrated in an e-learning platform. The e-learning platform used was Moodle. The first approach was to assess the mathematical skills necessary to solve all the problems related to electronics and electricity courses. Analysing the existing circuit simulators software tools, it is clear that even though they are very helpful by showing the end result they are not so effective in the process of the students studying and self learning since they show results but not intermediate steps which are crucial in problems that involve derivatives or integrals. Also, they are not very effective in obtaining graphical results that could be used to elaborate reports and for an overall better comprehension of the results. The developed tool was based on the numerical analysis software Scilab and is a toolbox that gives their users the opportunity to obtain the end results of a circuit analysis but also the expressions obtained when derivative and integrals calculations, plot signals, obtain vector diagrams, etc. The toolbox runs entirely in the Moodle web platform and provides the same results as the standalone application. The students can use the toolbox through the web platform (in computers where they don't have installation privileges) or in their personal computers by installing both the Scilab software and the toolbox. This approach was designed for first year students from all engineering degrees that have electronics/electricity courses in their curricula.

Electrical Skin Phenomena: A Fractional Calculus Analysis

The internal impedance of a wire is the function of the frequency. In a conductor, where the conductivity is sufficiently high, the displacement current density can be neglected. In this case, the conduction current density is given by the product of the electric field and the conductance. One of the aspects the high-frequency effects is the skin effect (SE). The fundamental problem with SE is it attenuates the higher frequency components of a signal. The SE was first verified by Kelvin in 1887. Since then many researchers developed work on the subject and presently a comprehensive physical model, based on the Maxwell equations, is well established. The Maxwell formalism plays a fundamental role in the electromagnetic theory. These equations lead to the derivation of mathematical descriptions useful in many applications in physics and engineering. Maxwell is generally regarded as the 19th century scientist who had the greatest influence on 20th century physics, making contributions to the fundamental models of nature. The Maxwell equations involve only the integer-order calculus and, therefore, it is natural that the resulting classical models adopted in electrical engineering reflect this perspective. Recently, a closer look of some phenomas present in electrical systems and the motivation towards the development of precise models, seem to point out the requirement for a fractional calculus approach. Bearing these ideas in mind, in this study we address the SE and we re-evaluate the results demonstrating its fractional-order nature.

Síndrome de Churg-Strauss, Aneurismas Femorais Venosos e Tromboembolismo Pulmonar

OBJECTIVE: Venous aneurysms of the lower limbs are rare. When they involve the deep venous system, they can be associated with deep venous thrombosis and pulmonary embolism. The authors report the case of a 63-year-old women evaluated by duplex imaging and venography, in the context of a pulmonary embolism, and detected bilateral large aneurysms of the femoral veins (5 cm in the right femoral vein and 4 cm in the left femoral vein). The aneurysms were located at the bifurcation of the common femoral vein with the superficial and profound veins. METHOD: The right aneurysm was partially thrombosed. The patient was asymptomatic in the lower-limb extremities. After a period of anticoagulation, the authors proceeded to surgically excise the right aneurysm and replaced the venous system using a polytetrafluoroethylene (PTFE) graft with the construction of an a-v fistula. RESULT: The patient had no complications in the postoperative period and her 8-month follow-up examination revealed no symptoms, not even leg edema. The duplex scan showed patency of the graft. She continued with oral anticoagulation. The histologic examination revealed an eosinophilic inflammatory reaction of the vein wall, compatible with the diagnosis of Churg-Strauss syndrome. CONCLUSION: The authors conclude that they have probably described the first case in the international literature of a venous aneurysm with a Churg-Strauss syndrome and pulmonary embolism.

Energy Harvesting for Autonomous Underwater Vehicles

In this study, energy production for autonomous underwater vehicles is investigated. This project is part of a bigger project called TURTLE. The autonomous vehicles perform oceanic researches at seabed for which they are intended to be kept operational underwater for several months. In order to ful l a long-term underwater condition, powerful batteries are combined with \micro- scale" energy production on the spot. This work tends to develop a system that generates power up to a maximum of 30 W. Latter energy harvesting structure consists basically of a turbine combined with a generator and low-power electronics to adjust the achieved voltage to a required battery charger voltage. Every component is examined separately hence an optimum can be de ned for all, and subsequently also an overall optimum. Di erent design parameters as e.g. number of blades, solidity ratio and cross-section area are compared for di erent turbines, in order to see what is the most feasible type. Further, a generator is chosen by studying how ux distributions might be adjusted to low velocities, and how cogging torque can be excluded by adapted designs. Low-power electronics are con gured in order to convert and stabilize heavily varying three-phase voltages to a constant, recti ed voltage which is usable for battery storage. Clearly, di erent component parameters as maximum power and torque are matched here to increase the overall power generation. Furthermore an overall maximum power is set up for achieving a maximum power ow at load side. Due to among others typical low velocities of about 0.1 to 0.5 m/s, and constructing limits of the prototype, the vast range of components is restricted to only a few that could be used. Hence, a helical turbine is combined in a direct drive mode to a coreless-stator axial- ux permanent-magnet generator, from which the output voltage is adjusted subsequently by a recti er, impedance matching unit, upconverter circuit and an overall control unit to regulate di erent component parameters. All these electronics are combined in a closed-loop design to involve positive feedback signals. Furthermore a theoretical con guration for the TURTLE vehicle is described in this work and a solution is proposed that might be implemented, for which several design tests are performable in a future study.

Embalagens Flexíveis: estudo do processo de reticulação de adesivos e do coeficiente de atrito

A dissertação foi realizada em ambiente industrial, mais precisamente na empresa Monteiro, Ribas – Embalagens Flexíveis, S.A.. Esta empresa dedica-se à impressão e laminagem de filmes, assim como à confeção de sacos. Os seus produtos são direcionados na sua maioria para a indústria alimentar, exportando mais de 50% da sua produção, e dizem respeito a complexos (dois ou mais filmes unidos pela presença de um adesivo) que podem possuir impressão ou não. Estes complexos podem ser enviados para o cliente em bobina ou já em saco. Os objetivos propostos pela empresa diziam respeito a estudos relacionados com a força de laminagem dos complexos, com o coeficiente de atrito dos mesmos e com a identificação dos espetros dos componentes dos adesivos, assim como o estudo do processo de reticulação dos mesmos por espetrofotometria de Infravermelho. Relativamente aos resultados obtidos verificou-se que tanto a tinta como os metalizados influenciam negativamente a força de laminagem. Por sua vez o coeficiente de atrito é afetado por vários fatores. Através dos ensaios experimentais verificou-se que o adesivo, a tinta e o verniz mate favorecem o aumento do valor do COF. Além disso, nos complexos em que se utilizaram filmes de polietileno de maior espessura obtiveram-se valores de COF mais baixos, e no que diz respeito à temperatura e à tensão de enrolamento, verificou-se que valores mais elevados e muito baixos da primeira traduzem-se num aumento do valor do COF e uma tensão de enrolamento maior também tem o mesmo efeito. Relativamente ao tipo de filme impresso, substratos com maior energia superficial atraem mais o agente de deslizamento (slip). Por último, não se conseguiu perceber qual o tipo de adesivo (com ou sem solvente) que tem maior impacto no COF uma vez que em 55% dos casos o valor do COF é superior nas amostras que foram complexadas com adesivo sem solvente e em 45% o COF era superior nas amostras complexadas com adesivo base solvente. No que diz respeito aos espetros obtidos verificou-se que a reticulação dos adesivos é identificada pela diminuição da extensão do pico correspondente à ligação N=C=O.

Myoelectric Signal Monitoring System

The Electromyography (EMG) is an important tool for gait analyzes and disorders diagnoses. Traditional methods involve equipment that can disturb the analyses, being gradually substituted by different approaches, like wearable and wireless systems. The cable replacement for autonomous systems demands for technologies capable of meeting the power constraints. This work presents the development of an EMG and kinematic data capture wireless module, designed taking into account power consumption issues. This module captures and converts the analog myoeletric signal to digital, synchronously with the capture of kinetic information. Both data are time multiplexed and sent to a PC via Bluetooth link. The work carried out comprised the development of the hardware, the firmware and a graphical interface running in an external PC. The hardware was developed using the PIC18F14K22, a low power family of microcontrollers. The link was established via Bluetooth, a protocol designed for low power communication. An application was also developed to recover and trace the signal to a Graphic User Interface (GUI), coordinating the message exchange with the firmware. Results were obtained which allowed validating the conceived system in static and with the subject performing short movements. Although it was not possible to perform the tests within more dynamic movements, it is shown that it is possible to capture, transmit and display the captured data as expected. Some suggestions to improve the system performance also were made.

Localized Abdominal Idiopathic Lipodystrophy

Localized loss of subcutaneous tissue can occur after panniculitis, injections of corticosteroids and other drugs, or associated with infectious, autoimmune or neurologic diseases. The "idiopathic lipoatrophies" are a group of poorly characterized diseases, with focal disappearance of subcutaneous fat, and usually the thighs, abdomen or the ankles are affected. Three subtypes have been described based on clinical presentation: lipoatrophia semicircularis, annular lipoatrophy of the ankles and centrifugal lipodystrophy. We describe a 52-year-old female patient who developed a localized atrophy of the abdominal areas over a period of 3 months without any inflammatory signs over the evolution of the disease. The patient denied any previous local trauma or medication of any type. The atrophy stabilized, showing no progression over the last 6 years. The histopathological examination was normal except for the absence of subcutaneous fat, although the biopsy was taken down to the fascia. There was no clinical or serologic evidence of autoimmune diseases and laboratory testing for Borrelia burgdorferi infection was negative. Other causes of localized lipoatrophies were excluded and the final diagnosis was localized idiopathic lipodystrophy. Our patient is the second report on an abdominal lipodystrophy, with no previous inflammatory signs, absence of subcutaneous fat and no associated pathogenic factor. There is no established treatment for idiopathic lipodystrophy, and the lesions do not tend to resolve spontaneously.

Atrofia Muscular Espinhal: Análise Descritiva de Uma Série de Casos

Introdução: A Atrofia Muscular Espinhal (AME) é o nome dado a uma doença neuromuscular específica caracterizada pela degeneração dos neurónios motores medulares, condicionando atrofia e fraqueza muscular progressivas. É determinada pela alteração do gene Survival Motor Neuron-1 (SMN1), localizado no braço longo do cromossoma cinco. Uma cópia quase idêntica do gene SMN1, chamada SMN2, modula a gravidade da doença. A AME repercute-se a nível de vários órgãos e sistemas, envolvendo frequentemente os sistemas respiratório, osteoarticular e gastrintestinal. Estão descritos vários subtipos da doença, com base quer na idade do início dos sintomas quer na máxima aquisição motora alcançada. Objectivos: Estudar a população de doentes com o diagnóstico de AME (clínico e/ou genético) seguida na Consulta de Medicina Física e de Reabilitação (CMFR) do Hospital de Dona Estefânia (HDE) em Lisboa, no período de Janeiro de 2007 a Outubro de 2009. Métodos: Estudo retrospectivo com análise de parâmetros sócio-demográficos, clínica, exames complementares de diagnóstico, evolução e complicações da doença. Resultados e Discussão: A casuística é constituída por doze doentes, com idades compreendidas entre os 0 meses e os 21 anos de idade, tendo sete o diagnóstico de AME I, um AME II equatro o diagnóstico de AME tipo III. Verificou-se que a gravidade da doença era inversamente proporcional à idade no início dos sintomas e à função motora máxima atingida pelo indivíduo durante o seu desenvolvimento. Todos os doentes apresentaram infecções respiratórias recorrentes e nos óbitos ocorridos, verificou-se como causa de morte a insuficiência respiratória, complicada de paragem cardio-respiratória. As principais complicações ortopédicas foram o desenvolvimento de contracturas articulares das grandes articulações dos membros inferiores, bem como o desenvolvimento de escoliose. A disfagia foi a principal complicação gastrenterológica. Conclusão: A não aquisição de etapas do desenvolvimento motor está correlacionada com um agravamento do prognóstico funcional e vital.

Excretion-secretion products and proteases from live Sporothrix schenckii yeast phase: immunological detection and cleavage of human IgG

Antigenic preparations from Sporothrix schenckii usually involve materials from mixed cultures of yeast and mycelia presenting cross-reactions with other deep mycoses. We have standardized pure yeast phase with high viability of the cells suitable to obtain specific excretion-secretion products without somatic contaminations. These excretion-secretion products were highly immunogenic and did not produce noticeable cross-reactions in either double immunodiffusion or Western blot. The antigenic preparation consists mainly of proteins with molecular weights between 40 and 70 kDa, some of them with proteolytic activity in mild acidic conditions. We also observed cathepsin-like activity at two days of culture and chymotrypsin-like activity at four days of culture consistent with the change in concentration of different secreted proteins. The proteases were able to cleave different subclasses of human IgG suggesting a sequential production of antigens and molecules that could interact and interfere with the immune response of the host.

De Novo Hypertension and Decline of Renal Function in a Young Woman with Systemic Lupus Erythematosus and Antiphospholipid Syndrome

Antiphospholipid syndrome nephropathy and lupus nephritis have similar clinical and laboratory manifestations and achieving the accuracy of diagnosis required for correct treatment frequently necessitates a kidney biopsy. We report the case of a 29-year-old woman referred to the nephrology service for de novo hypertension, decline of renal function and proteinuria. She had had systemic lupus erythematosus and antiphospholipid syndrome since the age of 21 and was taking oral anticoagulation. Two weeks later, after treatment of hypertension and achievement of adequate coagulation parameters, a percutaneous renal biopsy was performed. The biopsy revealed chronic lesions of focal cortical atrophy, arterial fibrous intimal hyperplasia and arterial thromboses, which are typical features of antiphospholipid syndrome nephropathy. We describe the clinical manifestations and histopathology of antiphospholipid syndrome nephropathy and review the literature on renal biopsy in patients receiving anticoagulation.

Peritubular Capillaries C4d Deposits in Renal Allograft Biopsies and Anti HLA I/II Alloantibodies Screening. Incidence and Clinical Importance

Aim: To characterise clinically the patients with C4d in peritubular capillaries deposits (C4dPTCD) and/or circulating anti-HLA class I/II alloantibodies. To determine the correlation between positive C4dPTCD and circulating anti-HLA class I/II alloantibodies during episodes of graft dysfunction. Subjects and Methods: C4d staining was performed in biopsies with available frozen tissue obtained between January 2004 and December 2006. The study was prospective from March 2005, when a serum sample was obtained at the time of biopsy to detect circulating anti-HLA class I/II alloantibodies. Results: We studied 109 biopsies in 86 cadaver renal transplant patients. Sixteen of these (14.7%) presented diffuse positive C4dPTCD. There was a 13.5% rate of +C4dPTCD incidence within the first six months of transplantation and 16% after six months (p>0.05). Half of the +C4dPTCD in the first six months was associated with acute humoral rejection. After six months, the majority of +C4dPTCD (n=7/8) was present in biopsies with evidence of interstitial fibrosis/tubular atrophy and/or transplant glomerulopathy. The C4dPTCD was more frequent in patients with positive anti-HCV antibodies(p<0.0001), a previous renal transplant (p=0.007), and with a panel reactivity antibody (PRA) ≥ 50%(p=0.0098). The anti-HCV+ patients had longer time on dialysis (p=0.0019) and higher PRA(p=0.005). Circulating anti-HLA I/II alloantibodies were screened in 46 serum samples. They were positive in 10.9% of samples, all obtained after six months post transplant. Circulating alloantibodies were absent in 92.5% of the C4d negative biopsies. Conclusion: We found an association between the presence of C4dPTCD and 2nd transplant recipients,higher PRA and the presence of anti-HCV antibodies. The presence of HCV antibodies is not a risk factor for C4dPTCD per se, but appears to reflect longer time on dialysis and presensitisation. In renal dysfunction a negative alloantibody screening is associated with a reduced risk of C4dPTCD (<10%).