Uso de modelos lineares mistos na avaliação genética de escores visuais: estudo de simulação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Incorporation of hydrogen production process in a sugar cane industry: Steam reforming of ethanol

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Larval development of indigenous South American freshwater fish species, with particular reference to pacu (Piaractus mesopotamicus): A review

In recent years, a number of South American freshwater fish have gained increasing attention for their potential in aquaculture, not only because of their excellent performance in farming systems but also to meet the high consumer demand for these species due to declining fishery resources. Many South American freshwater species are migratory and produce altricial larvae, with a small amount of yolk reserves. Unlike precocial freshwater species and altricial coldwater marine fish, these freshwater fish investigated have rapid yolk depletion and metamorphosis. Specific studies on the initial development of South American fish are scarce and fragmented. One of the most widely studied species is the pacu (Piaractus mesopotamicus), farmed in warm continental waters. In the present review we compile new and published data on the initial development of pacu, including morphogenesis of the skeletal, muscle, digestive and sensory systems; compare it to other Neotropical species; and discuss the importance of this information to develop larviculture protocols. When pacu larvae exhaust yolk reserves, they initiate a new form of interaction with the environment, becoming exclusively exotrophic. This type of interaction is made possible by the rapid development of sensory, skeletal, locomotor and digestive structures. In addition to understanding fish ontogeny, studies on larval development are necessary to improve farming systems and larviculture techniques aimed at producing high-quality juveniles in aquaculture. (C) 2014 Elsevier B.V. All rights reserved.

Soil and biomass mercury emissions during a prescribed fire in the Amazonian rain forest

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A method for calculating the compliance of bonded-interfaces under shrinkage: Validation for Class I cavities

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Measurement of the ratio B(t -> Wb)/B(t -> Wq) in pp collisions at root s=8 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Measurement of the t(t)over-bar production cross section in pp collisions at root s=8 TeV in dilepton final states containing one tau lepton

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Taxa de desenvolvimento de força em diferentes contrações musculares

O objetivo deste estudo foi comparar a taxa de desenvolvimento de força (TDF) nas contrações isométrica e isocinéticas concêntrica a 60°.s-1 e 180°.s-1. Quatorze indivíduos do gênero masculino (idade = 23,1±2,8 anos; estatura = 174±31,3 cm e; massa corporal = 81±12 kg) participaram deste estudo. Na primeira visita foi realizada uma familiarização ao equipamento isocinético. Posteriormente, os indivíduos realizaram em ordem randômica 5 contrações isocinéticas máximas para os extensores do joelho em 60°.s-1 e 180°.s-1 para determinar o torque máximo concêntrico (TMC) e 2 contrações isométricas máximas de 3 s para determinar o torque máximo isométrico (TMI). O TMI (301,4±56,0 N.m) foi maior do que o TMC a 60°.s-1 (239,8±42,2 N.m) e 180°.s-1 (175,0±32,5 N.m). O TMC a 60°.s-1 foi maior do que o TMC a 180°.s-1. Para os intervalos de 0-30ms e 0-50ms, a TDF na condição isométrica (1196,6±464,6 e 1326,5±514,2 N.m.s-1, respectivamente) foi similar à TDF a 60°.s- 1 (1035,4±446,2 e 1134,3±448,4 N.m.s-1) e maior do que a 180°.s-1 (656,7±246,6 e 475,2±197,9 N.m.s-1), sendo ainda que a TDF na contração concêntrica rápida foi menor do que na lenta. No intervalo 0-100ms, a TDF da contração isométrica (1248,8±417,4 N.m.s-1) foi significantemente maior que a obtida na contração isocinética rápida (909,2±283,4 N.m.s- 1). A TDF obtida na contração isocinética lenta (1005,4±247,7 N.m.s-1) foi similar à obtida na contração isométrica e na concêntrica isocinética rápida. No intervalo 0-150ms, a TDF isométrica (1084,2±332,1 N.m.s-1) foi maior do que as concêntricas (60°.s-1 e 180°.s-1) (834,8±184,2 e 767,6±201,8 N.m.s-1, respectivamente), não existindo diferenças entre estas duas últimas. Conclui-se que a TDF é...(Resumo completo, clicar acesso eletrônico abaixo)

Estresse oxidativo em cães com doença renal crônica

Pós-graduação em Medicina Veterinária - FCAV

Identification of Candida Spp. In Patients with Denture Stomatitis: Relationship with Gender, Age, Time of Denture use and Newton’s Classification

Epidemiological researches are important to understand the distribution and etiology of oral diseases. The actual researches that show the relationship between patient ages, denture status and denture stomatitis are scarce. So, the aim of this study was to identify of Candida spp. in patients with Denture Stomatitis (DS) and to correlate with gender, age, time of denture use and Newton’s classification. 204 complete denture patients (46 males and 158 females) were selected. DS was classified according to Newton’s classification and it was related to gender, age and time of denture use. Samples from the palatal mucosa and the surface of the upper denture of patients with DS were evaluated using PCR test for identification of Candida species. T-test, chisquare and Fisher’s exact tests were used for statistical analysis. DS was evidenced in 54.4% of the sample. According to gender 41.3% of the males and 58.3% females had the disease and the differences were statistically significant (p = 0.032). The type of DS was directly influenced by the time of denture use (p<0.001), but it was not significantly related to the age of the participants (p>0.05). C. albicans, C. tropicalis, C. glabrata, C. krusei and C. dubliniensis were identified by PCR test. DS is more prevalent in women and the prevalence of DS was influenced by the time of denture use (years). C. albicans was identified as the most frequent specie in patients with DS.

Cardiovascular and autonomic alterations in rats with parkinsonism induced by 6-OHDA and treated with L-DOPA

Evaluate the effects caused by L-DOPA on cardiovascular and autonomic parameters in an animal model of Parkinsonism induced by 6-hydroxydopamine (6-OHDA).Adult male Wistar rats were subjected to bilateral microinfusion of 6-OHDA or saline (sham group) in the substantia nigra, and treated by gavage with L-DOPA or water for 7days after surgery. On the 6th day the rats were subjected to femoral artery catheterization for cardiovascular recording. Mean arterial pressure (MAP) and heart rate (HR) were evaluated at baseline and during head up tilt (HUT) protocol. Spectral analysis of cardiovascular variability was performed using the V2.4 CardioSeries software v2.4. The lesion was quantified by dopamine levels in the striatum.Dopamine levels in the striatum were decreased in 6-OHDA rats (sham: 4.79±0.49ng/mg; 6-OHDA: 1.99±0.68ng/mg) and were not recovered by Prolopa treatment. Baseline values of MAP and HR were not different between groups. HUT induced an increase in MAP and HR (ΔMAP: 17±1mmHg, ΔHR: 39±4bpm) that were attenuated in 6-OHDA and in Prolopa treated animals. At baseline, the systolic arterial pressure (SAP) variance was lower in the 6-OHDA and sham Prolopa groups. Spontaneous baroreflex sensitivity was higher at baseline in the 6-OHDA group as compared to all studied groups.Our data suggest that treatment with Prolopa did not interfere with cardiovascular variables at baseline. However, during HUT, the 6-OHDA and Prolopa control animals presented a lower cardiovascular compensation, suggesting a possible autonomic impairment in Parkinsonism induced by 6-OHDA.

Bond strenght of dental adhesive systems irradiated with ionizing irradiation

The aim of the present paper was to determine the effect of different types of ionizing radiation on the bond strength of three different dentin adhesive systems. Materials and Methods: One hundred twenty specimens of 60 human teeth (protocol number: 032/2007) sectioned mesiodistally were divided into 3 groups according to the adhesives systems used: SB (Adper Single Bond Plus), CB (Clearfil SE Bond) and AP (Adper Prompt Self-Etch). The adhesives were applied on dentin and photo-activated using LED (Lec 1000, MMoptics, 1000 mW/cm2). Customized elastomer molds (0.5 mm thickness) with three orifices of 1.2 mm diameter were placed onto the bonding areas and filled with composite resin (Filtek Z-250), which was photoactivated for 20 s. Each group was subdivided into 4 subgroups for application of the different types of ionizing radiation: ultraviolet radiation (UV), diagnostic x-ray radiation (DX), therapeutic x-ray radiation (TX) and without irradiation (control group, CG). Microshear tests were carried out (Instron, model 4411), and afterwards the modes of failure were evaluated by optical and scanning electron microscope and classified using 5 scores: adhesive failure, mixed failures with 3 significance levels, and cohesive failure. The results of the shear bond strength test were submitted to ANOVA with Tukey's test and Dunnett's test, and the data from the failure pattern evaluation were analyzed with the Mann Whitney test (p = 0.05). Results: No change in bond strength of CB and AP was observed after application of the different radiation types, only SB showed increase in bond strength after UV (p = 0.0267) irradiation. The UV also changed the failure patterns of SB (p = 0.0001). Conclusion: The radio-induced changes did not cause degradation of the restorations, which means that they can be exposed to these types of ionizing radiation without weakening the bond strength.

Perivascular adipose tissue and vascular responses in healthy trained rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Novel expert system for defining power quality compensators

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

First insight on the impact of an osteoblastic layer on the bio-tribocorrosion performance of Ti6Al4V hip implants

In uncemented Ti6Al4V hip implants, the bone-stem interface is subjected to cyclic loading motion driven by the daily activities of the patients, which may lead to the complete failure of the implant in the long term. It may also compromise the proliferation and differentiation processes of osteoblastic cells (bone-forming cells). The main objective of this work is to approach for the first time the role of these organic materials on the bio-tribocorrosion mechanisms of cultured Ti6Al4V alloys. The colonized materials with MG63 osteoblastic-like cells were characterized through cell viability/proliferation and enzymatic activity. Tribocorrosion tests were performed under a reciprocating sliding configuration and low contact pressure. Electrochemical techniques were used to measure the corrosion kinetics of the system, under free potential conditions. All tests were performed at a controlled atmosphere. The morphology and topography of the wear scar were evaluated. The results showed that the presence of an osteoblastic cell layer on the implant surface significantly influences the tribocorrosion behavior of Ti6Al4V alloy. It was concluded that the cellular material was able to form an extra protective layer that inhibits further wear degradation of the alloy and decreases its corrosion tendency.