N-3 fatty acids and cardiovascular prevention

In this study we elucidate the role of polyunsaturated fatty acids (PUFAs) in the prevention of cardiovascular diseases, focusing the attention on their role in the modulation of acyl composition of cell lipids and of gene expression. Regarding this latter mechanism, the effectiveness of PUFAs as activators of two transcriptional factors, SREBPs and PPARs, have been considered. Two different model system have been used: primary cultures of neonatal rat cardiomyocytes and an human hepatoma cell line (HepG2). Cells have been supplemented with different PUFAs at physiological concentration, and special attention has been devoted to the main n-3 PUFAs, EPA and DHA. PUFAs influence on global gene expression in cardiomyocytes has been evaluated using microarray technique. Furthermore, since it is not fully elucidated which transcription factors are involved in this modulation in the heart, expression and activation of the three different PPAR isoforms have been investigated. Hepatocytes have been used as experimental model system in the evaluation of PUFAs effect on SREBP activity. SREBPs are considered the main regulator of cholesterol and triglyceride synthesis, which occur mainly in the liver. In both experimental models the modification of cell lipid fatty acid composition subsequent to PUFAs supplementation has been evaluated, and related to the effects observed at molecular level. The global vision given by the obtained results may be important for addressing new researches and be useful to educators and policy makers in setting recommendations for reaching optimal health through good nutrition.

Modellazione multibody di veicoli ferroviari: sviluppo ed implementazione di modelli innovativi per l'analisi del contatto ruota - rotaia

The wheel - rail contact analysis plays a fundamental role in the multibody modeling of railway vehicles. A good contact model must provide an accurate description of the global contact phenomena (contact forces and torques, number and position of the contact points) and of the local contact phenomena (position and shape of the contact patch, stresses and displacements). The model has also to assure high numerical efficiency (in order to be implemented directly online within multibody models) and a good compatibility with commercial multibody software (Simpack Rail, Adams Rail). The wheel - rail contact problem has been discussed by several authors and many models can be found in the literature. The contact models can be subdivided into two different categories: the global models and the local (or differential) models. Currently, as regards the global models, the main approaches to the problem are the so - called rigid contact formulation and the semi – elastic contact description. The rigid approach considers the wheel and the rail as rigid bodies. The contact is imposed by means of constraint equations and the contact points are detected during the dynamic simulation by solving the nonlinear algebraic differential equations associated to the constrained multibody system. Indentation between the bodies is not permitted and the normal contact forces are calculated through the Lagrange multipliers. Finally the Hertz’s and the Kalker’s theories allow to evaluate the shape of the contact patch and the tangential forces respectively. Also the semi - elastic approach considers the wheel and the rail as rigid bodies. However in this case no kinematic constraints are imposed and the indentation between the bodies is permitted. The contact points are detected by means of approximated procedures (based on look - up tables and simplifying hypotheses on the problem geometry). The normal contact forces are calculated as a function of the indentation while, as in the rigid approach, the Hertz’s and the Kalker’s theories allow to evaluate the shape of the contact patch and the tangential forces. Both the described multibody approaches are computationally very efficient but their generality and accuracy turn out to be often insufficient because the physical hypotheses behind these theories are too restrictive and, in many circumstances, unverified. In order to obtain a complete description of the contact phenomena, local (or differential) contact models are needed. In other words wheel and rail have to be considered elastic bodies governed by the Navier’s equations and the contact has to be described by suitable analytical contact conditions. The contact between elastic bodies has been widely studied in literature both in the general case and in the rolling case. Many procedures based on variational inequalities, FEM techniques and convex optimization have been developed. This kind of approach assures high generality and accuracy but still needs very large computational costs and memory consumption. Due to the high computational load and memory consumption, referring to the current state of the art, the integration between multibody and differential modeling is almost absent in literature especially in the railway field. However this integration is very important because only the differential modeling allows an accurate analysis of the contact problem (in terms of contact forces and torques, position and shape of the contact patch, stresses and displacements) while the multibody modeling is the standard in the study of the railway dynamics. In this thesis some innovative wheel – rail contact models developed during the Ph. D. activity will be described. Concerning the global models, two new models belonging to the semi – elastic approach will be presented; the models satisfy the following specifics: 1) the models have to be 3D and to consider all the six relative degrees of freedom between wheel and rail 2) the models have to consider generic railway tracks and generic wheel and rail profiles 3) the models have to assure a general and accurate handling of the multiple contact without simplifying hypotheses on the problem geometry; in particular the models have to evaluate the number and the position of the contact points and, for each point, the contact forces and torques 4) the models have to be implementable directly online within the multibody models without look - up tables 5) the models have to assure computation times comparable with those of commercial multibody software (Simpack Rail, Adams Rail) and compatible with RT and HIL applications 6) the models have to be compatible with commercial multibody software (Simpack Rail, Adams Rail). The most innovative aspect of the new global contact models regards the detection of the contact points. In particular both the models aim to reduce the algebraic problem dimension by means of suitable analytical techniques. This kind of reduction allows to obtain an high numerical efficiency that makes possible the online implementation of the new procedure and the achievement of performance comparable with those of commercial multibody software. At the same time the analytical approach assures high accuracy and generality. Concerning the local (or differential) contact models, one new model satisfying the following specifics will be presented: 1) the model has to be 3D and to consider all the six relative degrees of freedom between wheel and rail 2) the model has to consider generic railway tracks and generic wheel and rail profiles 3) the model has to assure a general and accurate handling of the multiple contact without simplifying hypotheses on the problem geometry; in particular the model has to able to calculate both the global contact variables (contact forces and torques) and the local contact variables (position and shape of the contact patch, stresses and displacements) 4) the model has to be implementable directly online within the multibody models 5) the model has to assure high numerical efficiency and a reduced memory consumption in order to achieve a good integration between multibody and differential modeling (the base for the local contact models) 6) the model has to be compatible with commercial multibody software (Simpack Rail, Adams Rail). In this case the most innovative aspects of the new local contact model regard the contact modeling (by means of suitable analytical conditions) and the implementation of the numerical algorithms needed to solve the discrete problem arising from the discretization of the original continuum problem. Moreover, during the development of the local model, the achievement of a good compromise between accuracy and efficiency turned out to be very important to obtain a good integration between multibody and differential modeling. At this point the contact models has been inserted within a 3D multibody model of a railway vehicle to obtain a complete model of the wagon. The railway vehicle chosen as benchmark is the Manchester Wagon the physical and geometrical characteristics of which are easily available in the literature. The model of the whole railway vehicle (multibody model and contact model) has been implemented in the Matlab/Simulink environment. The multibody model has been implemented in SimMechanics, a Matlab toolbox specifically designed for multibody dynamics, while, as regards the contact models, the CS – functions have been used; this particular Matlab architecture allows to efficiently connect the Matlab/Simulink and the C/C++ environment. The 3D multibody model of the same vehicle (this time equipped with a standard contact model based on the semi - elastic approach) has been then implemented also in Simpack Rail, a commercial multibody software for railway vehicles widely tested and validated. Finally numerical simulations of the vehicle dynamics have been carried out on many different railway tracks with the aim of evaluating the performances of the whole model. The comparison between the results obtained by the Matlab/ Simulink model and those obtained by the Simpack Rail model has allowed an accurate and reliable validation of the new contact models. In conclusion to this brief introduction to my Ph. D. thesis, we would like to thank Trenitalia and the Regione Toscana for the support provided during all the Ph. D. activity. Moreover we would also like to thank the INTEC GmbH, the society the develops the software Simpack Rail, with which we are currently working together to develop innovative toolboxes specifically designed for the wheel rail contact analysis.

Mechanismen der Aktivierung und Detoxifizierung von Aflatoxin B 1 in verschiedenen Leberzelltypen von Ratten, Mäusen und Waldmurmeltieren

Zusammenfassung: Die Applikation des Mykotoxins Aflatoxin B1 (AFB1) führt in der Ratte zu Lebertumoren hepatozellulären Ursprungs, während bisher keine transformierende Wirkung dieses Mykotoxins auf Kupffer- und Endothelzellen (Nichtparenchymzellen, NPC) nachgewiesen werden konnte. Diese Resistenzmechanismen der NPC gegenüber AFB1 wurden im ersten Teil dieser Arbeit untersucht. AFB1 ist per se inaktiv, wird jedoch durch Verstoffwechselung in den chemisch reaktiven, an DNA bindenden Metaboliten AFB1-8,9-Epoxid überführt. Daneben stellt die enzymatische Hydroxylierung von AFB1 am Kohlenstoff-9a zum Aflatoxin M1 eine Detoxifizierung dar. Durch HPLC-Analyse der AFB1-Metabolite konnte gezeigt werden, daß in Nichtparenchymzellen (NPC) das Verhältnis von 9a-Hydroxylierung zu 8,9-Epoxidierung höher als in Parenchymzellen (PC) ist. Die AFB1-9a-hydroxylase fördert insbesondere in den NPC der Leber die Bildung des weniger gentoxischen Metaboliten AFM1 und konkurriert daher um die Aktivierung von AFB1 zum mutagenen und kanzerogenen 8,9-Epoxid. Dieser metabolische Unterschied scheint also einen Beitrag zur Resistenz der NPC der Leber gegenüber der hepatokanzerogenen Wirkung von AFB1 zu leisten. Da ein Synergismus zwischen der AFB1-Exposition und einer Infektion mit dem Hepatitis B-Virus (HBV) beim Menschen bezüglich des Auftretens von hepatozellulären Karzinomen zu bestehen scheint, wurde im zweiten Teil dieser Arbeit untersucht, ob die metabolische Aktivierung von AFB1 durch eine HBV-Infektion verstärkt wird. In einem Vergleich der Biotransformation von AFB1 mit mikrosomalen Leberfraktionen von transgenen HBV-Mäusen und Kontrollmäusen wurde keine signifikanten Unterschiede festgestellt. Dagegen wurde bei Virus-infizierten Waldmurmeltieren eine deutlich reduzierte Bildung des AFB1-8,9-Epoxids beobachtet. Es konnte z.T. ein Zusammenhang zwischen den verschiedenen Stadien der Leberschädigung und den Metabolismusraten festgestellt werden, wobei die metabolische Aktivierung mit zunehmender Leberschädigung abzunehmen scheint. Auch hinsichtlich der Aktivitäten verschiedener Cytochrom P450 abhängiger Monooxygenasen wurde eine weitgehende Übereinstimmung mit den durch HPLC ermittelten Metabolitenprofilen des AFB1 beobachtet. Diese Studien mit subzellulären Leberfraktion der transgenen HBV-Mäusen und der Waldmurmeltieren zeigen, daß die Interaktion zwischen Hepatitis und AFB1 nicht mit der verstärkten metabolischer Aktivierung von AFB1 zu erklären ist. TGF-ß1, aus der Gruppe der Cytokine, wird als Mediator bei Entzündungsprozessen in der Leber so z.B. im Verlauf einer Virushepatitis freigesetzt. Aufgrund der besonderen Bedeutung des murinen CYP2A5 (ortholog zum humanen CYP2A6) bei der Aktivierung von AFB1 wurde der Einfluß von TGF-ß1 auf CYP2A5 in Primärkulturen von Maushepatozyten untersucht. Durch Messung der Aktivität der Cumarin-7-hydroxylase sowie durch Bestimmung der Proteinmenge von CYP2A5 mittels Western Blotting konnte zunächst die Induzierbarkeit des CYP2A5-Isoenzyms durch Phenobarbital in kultivierten Hepatozyten der Maus gezeigt werden. Nur bei einer niedrigen TGF-ß1-Konzentration wurde eine leicht erhöhte Expression von CYP2A5 festgestellt, ansonsten führte die Behandlung der kultivierten Maushepatozyten mit TGF-ß1 zu einer dosisabhängigen Verminderung der Expression von CYP2A5.

Jasmonates and abscisic acid influence fruit ripening and plant water use: practical, physiological and morphological aspects

The aim of the present thesis was to better understand the physiological role of the phytohormones jasmonates (JAs) and abscisic acid (ABA) during fruit ripening in prospect of a possible field application of JAs and ABA to improve fruit yield and quality. In particular, the effects of exogenous application of these substances at different fruit developmental stages and under different experimental conditions were evaluated. Some aspects of the water relations upon ABA treatment were also analysed. Three fruit species, peach (Prunus persica L. Batsch), golden (Actinidia chinensis) and green kiwifruit (Actinidia deliciosa), and several of their cvs, were used for the trials. Different experimental models were adopted: fruits in planta, detached fruit, detached branches with fruit, girdled branches and micropropagated plants. The work was structured into four sets of experiments as follows: (i) Pre-harvest methyl jasmonate (MJ) application was performed at S3/S4 transition under field conditions in Redhaven peach; ethylene production, ripening index, fruit quality and shelf-life were assessed showing that MJ-treated fruit were firmer and thus less ripe than controls as confirmed by the Index of Absorbance Difference (IAD), but exhibited a shorter shelf-life due to an increase in ethylene production. Moreover, the time course of the expression of ethylene-, auxin- and other ripening-related genes was determined. Ripening-related ACO1 and ACS1 transcript accumulation was inhibited though transiently by MJ, and gene expression of the ethylene receptor ETR2 and of the ethylene-related transcription factor ERF2 was also altered. The time course of the expression of several auxin-related genes was strongly affected by MJ suggesting an increase in auxin biosynthesis, altered auxin conjugation and release as well as perception and transport; the need for a correct ethylene/auxin balance during ripening was confirmed. (ii) Pre- and post-harvest ABA applications were carried out under field conditions in Flaminia and O’Henry peach and Stark Red Gold nectarine fruit; ethylene production, ripening index, fruit quality and shelf-life were assessed. Results show that pre-harvest ABA applications increase fruit size and skin color intensity. Also post-harvest ABA treatments alter ripening-related parameters; in particular, while ethylene production is impaired in ABA-treated fruit soluble solids concentration (SSC) is enhanced. Following field ABA applications stem water potential was modified since ABA-treated peach trees retain more water. (iii) Pre- and post-harvest ABA and PDJ treatments were carried out in both kiwifruit species under field conditions at different fruit developmental stages and in post-harvest. Ripening index, fruit quality, plant transpiration, photosynthesis and stomatal conductance were assessed. Pre-harvest treatments enhance SSC in the two cvs and flesh color development in golden kiwifruit. Post-harvest applications of either ABA or ABA plus PDJ lead to increased SSC. In addition, ABA reduces gas exchanges in A. deliciosa. (iv) Spray, drench and dipping ABA treatments were performed in micropropagated peach plants and in peach and nectarine detached branches; plant water use and transpiration, biomass production and fruit dehydration were determined. In both plants and branches ABA significantly reduces water use and fruit dehydration. No negative effects on biomass production were detected. The present information, mainly arising from plant growth regulator application in a field environment, where plants have to cope with multiple biotic and abiotic stresses, may implement the perspectives for the use of these substances in the control of fruit ripening.

Synthese und Charakterisierung von Oxidchalkogeniden und Bronzen für die Nanostrukturierung

Ausgehend von der Entdeckung der reversiblen Strukturierung mittels Rastersondenmethoden im Phasensystem Na2O/V2O5/P2O5 wurden im Rahmen dieser Arbeit zwei Ansatzpunkte verfolgt. Einerseits sollten mittels der Schmelzflußelektrolyse einige bereits existierende niederdimensionale Molybdänbronzen mit bekannten elektronischen Übergängen in ausreichend großen Kristallen gezüchtet werden, um sie auf ihre Strukturierungseigenschaften hin zu untersuchen. Gleichzeitig sollte durch Variation versucht werden, neue, bisher unbekannte Bronzen oder reduzierte Oxide zu synthetisieren und charakterisieren. Der zweite Schwerpunkt dieser Arbeit lag in der Synthese und Charakterisierung von Oxidchalkogeniden, bestehend aus einem Seltenerdmetall und einem 3d-Metall von Titan bis hin zu den mittleren Übergangsmetallen. Diese Verbindungen können durch die Kombination der jeweiligen Eigenschaften der oxidischen und chalkogeniden Teilstrukturen völlig neue elektronische und/oder magnetische Eigenschaften aufweisen. Mögliche auftretende Phasenübergänge sind wiederum für Strukturierungsversuche interessant. Die zu den Oxidchalkogeniden durchgeführten Untersuchungen ergaben im Phasensystem Ln/Ti/S/O (Ln = Lanthanoide) insgesamt sechs Verbindungen. Zwei von ihnen, La8Ti9S24O4 und Nd20Ti11S44O6, besitzen als gemeinsames Strukturelement tetranukleare [Ti4(u4-S)2(u2-O)4]-Cluster, bestehend aus vier miteinander über gemeinsame Flächen kondensierte TiS4O2-Oktaeder. Die Titanpositionen innerhalb der Cluster sind mit Ti+3-Ionen besetzt. Beide Verbindungen weisen in einem Temperaturbereich zwischen 150 K und 250 K eine deutlich ausgeprägte Hysterese der magnetischen Suszeptibilität auf, die sich im Falle von La8Ti9S24O4 auf einen Jahn-Teller-Übergang zurückführen läßt. Daneben konnte erstmals eine Serie oxidisch/sulfidisch gemischter Ruddlesden-Popper-Verbindungen mit Ln2Ti2S2O5 (Ln = Pr, Nd, Sm) synthetisiert und charakterisiert werden. Titan liegt als vierwertiges Ion in aus TiSO5-Oktaedern gebildeten Perowskit-Doppelschichten vor. Die neunfach koordinierten Positionen sind mit den Seltenerdmetallionen gefüllt, die zwölffach koordinierten Lagen sind unbesetzt. Bei dem sechsten erhaltene Titanoxidsulfid, La4TiS6.5O1.5, handelt es sich um einen Halbleiter mit einer Bandlücke von etwa 2 eV. Weiterhin gelang es, die Serie Ln2M3S2O8 (Ln = La, Ce, Pr, Nd, Sm; M = Nb, Ta) zu synthetisieren und in ihren physikalischen Eigenschaften zu charakterisieren. Es handelt sich ausnahmslos um Halbleiter mit Bandlücken zwischen E=0.125 eV für La2Nb3S2O8 und E=0.222 eV für Pr2Ta3S2O8. Die Struktur der Oxidsulfide Ce2Ta3S2O8, Pr2Ta3S2O8, Nd2Nb3S2O8 sowie Sm2Ta3S2O8 weist im Gegensatz zu den anderen Verbindungen eine Fehlordnung eines der beiden kristallographisch unabhängigen Nb- bzw. Ta-Atome auf. Daraus resultiert eine Symmetrieerniedrigung von Pnma zu Pbam. Der Einsatz von Europium führte zu einer neuen Modifikation des bronzoiden Oxids EuTa2O6, in der das Europium als Eu+2 vorliegt, wie 151Eu-Mößbauer-Untersuchungen bestätigten. Vor der Durchführung der Kristallzüchtungen mittels der Schmelzflußelektrolysen mußten die benutzen Öfen und Elektrolysezellen geplant und angefertigt werden. Es konnten dann verschiedene blaue, rote und violette Moybdänbronzen (sowie La2Mo2O7) in Kristallen bis zu 25 mm Länge dargestellt werden. Ferner gelang die erste exakte Einkristalluntersuchung der roten Bronze Rb0.33MoO3. Sie verfügt über die höchste d-Elektronen-Lokalisierungsrate aller bekannten roten Bronzen. Die erhaltenen Bronzen wurden teilweise von der Arbeitsgruppe Fuchs, Physikalisches Institut der Westfälischen Wilhelms-Universität Münster, auf ihre Nanostrukturierbarkeit hin untersucht. Dabei ergaben sich zwei verschiedene Strukturierungsmechanismen. Sind es im Fall der blauen Alkalimetall-Molybdänbronzen ausschließlich Lochstrukturen, die entstehen, handelt es sich bei La2Mo2O7 um Hügelstrukturen. Mittels der Schmelzflußelektrolyse konnte auch das gemischtvalente Alkalimetall-Eisenmolybdat NaFe2(MoO4)3 synthetisiert werden. Daneben gelang die Synthese dreier weiterer Alkalimetall-Eisenmolybdate: Cs2Fe2(MoO4)3, NaFe4(MoO4)5 und CsFe5(MoO4)7. Bis auf Cs2Fe2(MoO4)3, welches in der bekannten Langbeinit-Struktur kristallisiert, handelt es sich bei den übrigen Alkalimetall-Eisenmolybdaten um völlig neuartige Käfigverbindungen, bzw. bei CsFe5(MoO4)7 um eine Tunnelverbindung. Die Kristallstrukturen beinhalten kondensierte FeO6-Oktaeder. Im Fall von NaFe2(MoO4)3 lassen sich [Fe2O10]-Einheiten, für NaFe4(MoO4)5 [Fe2O10]- sowie [Fe3O14]-Einheiten, und für CsFe5(MoO4)7 [Fe4O18]-Baueinheiten beobachten. Die Positionen der Fe+2- und Fe+3-Atome in NaFe4(MoO4)5 wurden mit Hilfe einer 57Fe-Mößbauer-Untersuchung bestimmt.

Untersuchung neuer hochwirksamer neuroprotektiver Antioxidantien in experimentellen Modellen der Parkinsonschen Krankheit

Bei der Parkinsonschen Krankheit kommt es zu einer selektiven Degeneration der dopaminergen Neurone in der Substantia nigra pars compacta. Die Rolle des oxidativen Stresses in der Pathogenese dieser Erkrankung konnte an post mortem Untersuchungen der Parkinson-Patienten, wie auch an zahlreichen in vitro und in vivo Modellen bestätigt werden. Die Anwendung von Antioxidantien wurde als therapeutische Strategie der Parkinsonschen Krankheit vorgeschlagen. In dieser Hinsicht wurden bereits antioxidative Substanzen in klinischen Studien evaluiert. Klinische Studien mit Antioxidantien haben jedoch bislang nur wenig überzeugende Ergebnisse erbracht, mit Ausnahme des Einsatzes des Ubichinons (Coenzym Q). Eine kritische Analyse der klinischen Studien lässt zusammenfassen, dass auf Seiten der verwendeten Antioxidantien noch massiver Optimierungsbedarf besteht. Für einen erfolgreichen therapeutischen Einsatz von Antioxidantien bei dieser Krankheit sind folgende Eigenschaften der Substanzen von höchster Bedeutung: i) maximale neuroprotektive Aktivität bei geringen Dosen; ii) geringe Nebenwirkungen; iii) eine hohe Blut-Hirn-Schrankengängigkeit.In dieser Arbeit wurde das neuroprotektive Potential von drei Bisarylimin-basierten antioxidativen Strukturen (Phenothiazin, Iminostilben und Phenoxazin) in in vitro und in vivo Parkinson-Modellsystemen evaluiert. Beide experimentellen Modelle basieren auf der Wirkung der mitochondrialen Komplex I Inhibitoren 1-Methyl-4-Phenylpyridin (MPP+) und Rotenon, welche pathophysiologische Charakteristika der Parkinsonschen Krankheit reproduzieren. Unsere in vitro Untersuchungen an primären Neuronen des Mittelhirns und der klonalen SH-SY5Y-Neuroblastomazelllinie konnten zeigen, dass die Komplex I Inhibition krankheitsspezifische zelluläre Merkmale induziert, wie die Abnahme der antioxidativen Verteidigungskapazität und Verlust des mitochondrialen Membranpotentials. Zusätzlich kommt es in primären Neuronen des Mittelhirns zur selektiven Degeneration dopaminerger Neurone, welche in der Parkinsonschen Erkrankung besonders betroffen sind. Ko-Inkubation der in vitro Modelle mit Phenothiazin, Iminostilben und Phenoxazin in niedrigen Konzentrationen (50 nM) halten die pathologischen Prozesse fast vollständig auf. In vivo Untersuchungen am MPP+- und Rotenon-basierten Caenorhabditis elegans (C. elegans) Modell bestätigen das neuroprotektive Potential der Bisarylimine. Hierfür wurde eine transgene C. elegans Linie mithilfe einer dopaminerg spezifischen DsRed2- (Variante des rot fluoreszierenden Proteins von Discosoma sp.)-Expression und pan-neuronaler CFP- (cyan fluoreszierendes Protein)-Expression zur Visualisierung der dopaminergen Neuronenpopulation in Kontrast zum Gesamtnervensystem erstellt. Behandlung des C. elegans mit MPP+ und Rotenon im larvalen und adulten Stadium führt zu einer selektiven Degeneration dopaminerger Neurone, sowie zum Entwicklungsarrest der larvalen Population. Die dopaminerge Neurodegeneration, wie auch weitere phänotypische Merkmale des C. elegans Modells, können durch Phenothiazin, Iminostilben und Phenoxazin in niedrigen Konzentrationen (500 nM) komplett verhindert werden. Ein systemischer Vergleich aromatischer Bisarylimine mit bekannten, gut charakterisierten Antioxidantien, wie α-Tocopherol (Vitamin E), Epigallocatechingallat und β-Catechin, zeigt, dass effektive Konzentrationen für Phenothiazin, Iminostilben und Phenoxazin um Zehnerpotenzen niedriger liegen im Vergleich zu natürlichen Antioxidantien. Der Wirkungsmechanismus der Bisarylimine konnte in biochemischen und in vitro Analysen, sowie in Verhaltensuntersuchungen an C. elegans von der Wirkungsweise strukturell ähnlicher, neuroleptisch wirkender Phenothiazin-Derivate differenziert werden. Die Analyse des dopaminerg-gesteuerten Verhaltens (Beweglichkeit) in C. elegans konnte verdeutlichen, dass antioxidative und Dopaminrezeptor-bindende Eigenschaften der Bisaryliminstrukturen sich gegenseitig ausschließen. Diese qualitativen Merkmale unterscheiden Bisarylimine fundamental von klinisch angewandten Neuroleptika (Phenothiazin-Derivate), welche als Dopaminrezeptor-Antagonisten zur Behandlung psychischer Erkrankungen klinisch eingesetzt werden.Aromatische Bisarylimine (Phenothiazin, Iminostilben und Phenoxazin) besitzen günstige strukturelle Eigenschaften zur antioxidativ-basierter Neuroprotektion. Durch die Anwesenheit der antioxidativ wirkenden, nicht-substituierten Iminogruppe unterscheiden sich Bisarylimine grundlegend von neuroleptisch-wirkenden Phenothiazin-Derivaten. Wichtige strukturelle Voraussetzungen eines erfolgreichen antioxidativen Neuropharmakons, wie eine hohe Radikalisierbarkeit, die stabile Radikalform und der lipophile Charakter des aromatischen Ringsystems, werden in der Bisaryliminstruktur erfüllt. Antioxidative Bisarylimine könnten in der Therapie der Parkinsonschen Krankheit als eine effektive neuroprotektiv-therapeutische Strategie weiter entwickelt werden.

Physical coronary arteriogenesis: a human "model" of collateral growth promotion

In patients with coronary artery disease, the size of myocardial infarction mainly determines the subsequent clinical outcome. Accordingly, it is the primary strategy to decrease cardiovascular mortality by minimizing infarct size. Promotion of collateral artery growth (arteriogenesis) is an appealing option of reducing infarct size. It has been demonstrated in experimental models that tangential fluid shear stress is the major trigger of arterial remodeling and, thus, of collateral growth. Lower-leg, high-pressure external counterpulsation triggered to occur during diastole induces a flow velocity signal and thus tangential endothelial shear stress in addition to the flow signal caused by cardiac stroke volume. We here present two cases of cardiac transplant recipients as human "models" of physical coronary arteriogenesis, providing an example of progressing and regressing clinical arteriogenesis, and review available evidence from clinical studies on other feasible forms of physical arteriogenesis.

Rapid assessment of internodal myelin integrity in central nervous system tissue

Monitoring pathology/regeneration in experimental models of de-/remyelination requires an accurate measure not only of functional changes but also of the amount of myelin. We tested whether X-ray diffraction (XRD), which measures periodicity in unfixed myelin, can assess the structural integrity of myelin in fixed tissue. From laboratories involved in spinal cord injury research and in studying the aging primate brain, we solicited "blind" samples and used an electronic detector to record rapidly the diffraction patterns (30 min each pattern) from them. We assessed myelin integrity by measuring its periodicity and relative amount. Fixation of tissue itself introduced +/-10% variation in periodicity and +/-40% variation in relative amount of myelin. For samples having the most native-like periods, the relative amounts of myelin detected allowed distinctions to be made between normal and demyelinating segments, between motor and sensory tracts within the spinal cord, and between aged and young primate CNS. Different periodicities also allowed distinctions to be made between samples from spinal cord and nerve roots and between well-fixed and poorly fixed samples. Our findings suggest that, in addition to evaluating the effectiveness of different fixatives, XRD could also be used as a robust and rapid technique for quantitating the relative amount of myelin among spinal cords and other CNS tissue samples from experimental models of de- and remyelination.

Meningitis in neonates: bench to bedside

The clinical outcome of central nervous system infection is determined by the characteristics of the pathogen and the brain's response to the invading bacteria. How infection leads to brain injury remains unresolved. An impediment to progress is the complexity of pathophysiologic processes. Some of the mechanisms involved have been identified in experimental models, providing insights into the molecular basis of brain injury and regeneration, and hinting at targets for therapy. Adjuvant therapies have been proposed. Interventions that protect the brain are evaluated for their potential to preserve neuro-integrative functions in long-term survivors of bacterial meningitis. This article summarizes current studies evaluating pharmacologic interventions in experimental models of bacterial meningitis and discusses how the knowledge gathered could translate into more effective therapies.

HVEM signalling promotes colitis

Background Tumor necrosis factor super family (TNFSF) members regulate important processes involved in cell proliferation, survival and differentiation and are therefore crucial for the balance between homeostasis and inflammatory responses. Several members of the TNFSF are closely associated with inflammatory bowel disease (IBD). Thus, they represent interesting new targets for therapeutic treatment of IBD. Methodology/Principal Findings We have used mice deficient in TNFSF member HVEM in experimental models of IBD to investigate its role in the disease process. Two models of IBD were employed: i) chemical-induced colitis primarily mediated by innate immune cells; and ii) colitis initiated by CD4+CD45RBhigh T cells following their transfer into immuno-deficient RAG1-/- hosts. In both models of disease the absence of HVEM resulted in a significant reduction in colitis and inflammatory cytokine production. Conclusions These data show that HVEM stimulatory signals promote experimental colitis driven by innate or adaptive immune cells.

Microsurgery in liver research: end-to-side portocaval microanastomoses in dogfish

The use of an operating microscope in animal liver surgery has made it possible to obtain new experimental models. The goal of this prospective animal study is to present our experience with dogfish portocaval microanastomoses.

Bacterial meningitis: current therapy and possible future treatment options

Despite targeted therapy, case-fatality rates and neurologic sequelae of bacterial meningitis remain unacceptably high. The poor outcome is mainly due to secondary systemic and intracranial complications. These complications seem to be both a consequence of the inflammatory response to the invading pathogen and release of bacterial components by the pathogen itself. Therefore, within the last decades, research has focused on the mechanism underlying immune regulation and the inhibition of bacterial lysis in order to identify new targets for adjuvant therapy. The scope of this article is to give an overview on current treatment strategies of bacterial meningitis, to summarize new insights on the pathophysiology of bacterial meningitis, and to give an outlook on new treatment strategies derived from experimental models.

Bacterial meningitis impairs hippocampal neurogenesis

Bacterial meningitis causes persisting neurofunctional sequelae. Theoccurrence of apoptotic cell death in the hippocampal subgranular zone of the dentate gyrus characterizes the disease in patients and relates to deficits in learning and memory in corresponding experimental models. Here, we investigated why neurogenesis fails to regenerate the damage in the hippocampus associated with the persistence of neurofunctional deficits. In an infant rat model of bacterial meningitis, the capacity of hippocampal-derived cells to multiply and form neurospheres was significantly impaired comparedto that in uninfected littermates. In an in vitro model of differentiating hippocampal cells, challenges characteristic of bacterial meningitis (i.e. bacterial components, tumor necrosis factor [20 ng/mL], or growth factor deprivation) caused significantly more apoptosis in stem/progenitor cells and immature neurons than in mature neurons. These results demonstrate that bacterial meningitis injures hippocampal stem and progenitor cells, a finding that may explain the persistence of neurofunctional deficits after bacterial meningitis.

Adjunctive dexamethasone affects the expression of genes related to inflammation, neurogenesis and apoptosis in infant rat pneumococcal meningitis

Streptococcus pneumoniae is the most common pathogen causing non-epidemic bacterial meningitis worldwide. The immune response and inflammatory processes contribute to the pathophysiology. Hence, the anti-inflammatory dexamethasone is advocated as adjuvant treatment although its clinical efficacy remains a question at issue. In experimental models of pneumococcal meningitis, dexamethasone increased neuronal damage in the dentate gyrus. Here, we investigated expressional changes in the hippocampus and cortex at 72 h after infection when dexamethasone was given to infant rats with pneumococcal meningitis. Nursing Wistar rats were intracisternally infected with Streptococcus pneumoniae to induce experimental meningitis or were sham-infected with pyrogen-free saline. Besides antibiotics, animals were either treated with dexamethasone or saline. Expressional changes were assessed by the use of GeneChip® Rat Exon 1.0 ST Arrays and quantitative real-time PCR. Protein levels of brain-derived neurotrophic factor, cytokines and chemokines were evaluated in immunoassays using Luminex xMAP® technology. In infected animals, 213 and 264 genes were significantly regulated by dexamethasone in the hippocampus and cortex respectively. Separately for the cortex and the hippocampus, Gene Ontology analysis identified clusters of biological processes which were assigned to the predefined categories "inflammation", "growth", "apoptosis" and others. Dexamethasone affected the expression of genes and protein levels of chemokines reflecting diminished activation of microglia. Dexamethasone-induced changes of genes related to apoptosis suggest the downregulation of the Akt-survival pathway and the induction of caspase-independent apoptosis. Signalling of pro-neurogenic pathways such as transforming growth factor pathway was reduced by dexamethasone resulting in a lack of pro-survival triggers. The anti-inflammatory properties of dexamethasone were observed on gene and protein level in experimental pneumococcal meningitis. Further dexamethasone-induced expressional changes reflect an increase of pro-apoptotic signals and a decrease of pro-neurogenic processes. The findings may help to identify potential mechanisms leading to apoptosis by dexamethasone in experimental pneumococcal meningitis.

Lipid profiles and outcome in patients treated by intravenous thrombolysis for cerebral ischemia

OBJECTIVE:To determine whether low low-density lipoprotein cholesterol (LDL-C) but not high-density lipoprotein cholesterol (HDL-C) and triglyceride concentrations are associated with worse outcome in a large cohort of ischemic stroke patients treated with IV thrombolysis. METHODS:Observational multicenter post hoc analysis of prospectively collected data in stroke thrombolysis registries. Because of collinearity between total cholesterol (TC) and LDL-C, we used 2 different models with TC (model 1) and with LDL-C (model 2). RESULTS:Of the 2,485 consecutive patients, 1,847 (74%) had detailed lipid profiles available. Independent predictors of 3-month mortality were lower serum HDL-C (adjusted odds ratio [(adj)OR] 0.531, 95% confidence interval [CI] 0.321-0.877 in model 1; (adj)OR 0.570, 95% CI 0.348-0.933 in model 2), lower serum triglyceride levels ((adj)OR 0.549, 95% CI 0.341-0.883 in model 1; (adj)OR 0.560, 95% CI 0.353-0.888 in model 2), symptomatic ICH, and increasing NIH Stroke Scale score, age, C-reactive protein, and serum creatinine. TC, LDL-C, HDL-C, and triglycerides were not independently associated with symptomatic ICH. Increased HDL-C was associated with an excellent outcome (modified Rankin Scale score 0-1) in model 1 ((adj)OR 1.390, 95% CI 1.040-1.860). CONCLUSION:Lower HDL-C and triglycerides were independently associated with mortality. These findings were not due to an association of lipid concentrations with symptomatic ICH and may reflect differences in baseline comorbidities, nutritional state, or a protective effect of triglycerides and HDL-C on mortality following acute ischemic stroke.