ACIAR Producing virus-free sweetpotato planting material in Papua New Guinea

The aim of this small research activity (SRA) is to provide a foundation for establishing a national 'clean seed system' for sweetpotato in Papua New Guinea.

Agronomic Packages for Improved Yield and Quality in the Australian Peanut Industry

Monitoring aflatoxin and developing improved peanut drying practices, cadmium management and web based irrigation decision support systems.

Smart technologies for peanut industry

Commercialisation and adoption of remote sensing and GIS technologies for improved production forecasting, productivity, quality and paddock- to- plate tracking within the Australian Peanut Industry.

ACIAR Productivity and profitability enhancing tropical pulses in Indonesia and Australia

The project aims at improving the productivity and profitability of mung beans, soy beans and peanuts.

Mannans as film formers and emulsion stabilizers

Mannans are abundant plant polysaccharides found in the endosperm of certain leguminous seeds (guar gum galactomannan, GG; locust bean gum galactomannan, LBG), in the tuber of the konjac plant (konjac glucomannan, KGM), and in softwoods (galactoglucomannan, GGM). This study focused on the effects of the chemical structure of mannans on their film-forming and emulsion-stabilizing properties. Special focus was on spruce GGM, which is an interesting new product from forest biorefineries. A plasticizer was needed for the formation of films from mannans other than KGM and the optimal proportion was 40% (w/w of polymers) glycerol or sorbitol. Galactomannans with lower galactose content (LBG, modified GG) produced films with higher elongation at break and tensile strength. The mechanical properties of GG-based films were improved by decreasing the degree of polymerization of the polysaccharide with moderate mannanase treatments. The improvement of mechanical properties of GGM-based films was sought by blending GGM with each of poly(vinyl alcohol) (PVOH), corn arabinoxylan (cAX), and KGM. Adding other polymers increased the elongation at break of GGM blend films. The tensile strength of films increased with increasing amounts of PVOH and KGM, but the effect of cAX was the opposite. Dynamic mechanical analysis showed two separate loss modulus peaks for blends of GGM and PVOH, but a single peak for all other films. Optical and scanning electron microscopy confirmed good miscibility of GGM with cAX and KGM. In contrast, films blended from GGM and PVOH showed phase separation. GGM and KGM were mixed with cellulose nanowhiskers (CNW) to form composite films. Addition of CNW to KGM-based films induced the formation of fiberlike structures with lengths of several millimeters. In GGM-based films, rodlike structures with lengths of tens of micrometers were formed. Interestingly, the notable differences in the film structure did not appear to be related to the mechanical and thermal properties of the films. Permeability properties of GGM-based films were compared to those of films from commercial mannans KGM, GG, and LBG. GGM-based films had the lowest water vapor permeability when compared to films from other mannans. The oxygen permeability of GGM films was of the same magnitude as that of commercial polyethylene / ethylene vinyl alcohol / polyethylene laminate film. The aroma permeability of GGM films was low. All films were transparent in the visible region, but GGM films blocked the light transmission in the ultraviolet region of the spectra. The stabilizing effect of GGM on a model beverage emulsion system was studied and compared to that of GG, LBG, KGM, and cAX. In addition, GG was enzymatically modified in order to examine the effect of the degree of polymerization and the degree of substitution of galactomannans on emulsion stability. Use of GGM increased the turbidity of emulsions both immediately after preparation and after storage of up to 14 days at room temperature. GGM emulsions had higher turbidity than the emulsions containing other mannans. Increasing the storage temperature to +45 ºC led to rapid emulsion breakdown, but a decrease in storage temperature increased emulsion stability after 14 days. A low degree of polymerization and a high degree of substitution of the modified galactomannans were associated with a decrease in emulsion turbidity.

Glycoalkaloid Content and Starch Structure in Solanum Species and Interspecific Somatic Potato Hybrids

When genome sections of wild Solanum species are bred into the cultivated potato (S. tuberosum L.) to obtain improved potato cultivars, the new cultivars must be evaluated for their beneficial and undesirable traits. Glycoalkaloids present in Solanum species are known for their toxic as well as for beneficial effects on mammals. On the other hand, glycoalkaloids in potato leaves provide natural protection against pests. Due to breeding, glycoalkaloid profile of the plant is affected. In addition, the starch properties in potato tubers can be affected as a result of breeding, because the crystalline properties are determined by the botanical source of the starch. Starch content and composition affect the texture of cooked and processed potatoes. In order to determine glycoalkaloid contents in Solanum species, simultaneous separation of glycoalkaloids and aglycones using reversed-phase high-performance liquid chromatography (HPLC) was developed. Clean-up of foliage samples was improved using a silica-based strong cation exchanger instead of octadecyl phases in solid-phase extraction. Glycoalkaloids alpha-solanine and alpha-chaconine were detected in potato tubers of cvs. Satu and Sini. The total glycoalkaloid concentration of non-peeled and immature tubers was at an acceptable level (under 20 mg/100 g of FW) in the cv. Satu, whereas concentration in cv. Sini was 23 mg/100 g FW. Solanum species (S. tuberosum, S. brevidens, S. acaule, and S. commersonii) and interspecific somatic hybrids (brd + tbr, acl + tbr, cmm + tbr) were analyzed for their glycoalkaloid contents using liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS). The concentrations in the tubers of the brd + tbr and acl + tbr hybrids remained under 20 mg/100 g FW. Glycoalkaloid concentration in the foliage of the Solanum species was between 110 mg and 890 mg/100 g FW. However, the concentration in the foliage of S. acaule was as low as 26 mg/100 g FW. The total concentrations of brd + tbr, acl + tbr, and cmm + tbr hybrid foliages were 88 mg, 180 mg, and 685 mg/100 g FW, respectively. Glycoalkaloids of both parental plants as well as new combinations of aglycones and saccharides were detected in somatic hybrids. The hybrids contained mainly spirosolanes, and glycoalkaloid structures having no 5,6-double bond in the aglycone. Based on these results, the glycoalkaloid profiles of the hybrids may represent a safer and more beneficial spectrum of glycoalkaloids than that found in currently cultivated varieties. Starch nanostructure of three different cultivars (Satu, Saturna, and Lady Rosetta), a wild species S. acaule, and interspecific somatic hybrids were examined by wide-angle and small-angle X-ray scattering (WAXS, SAXS). For the first time, the measurements were conducted on fresh potato tuber samples. Crystallinity of starch, average crystallite size, and lamellar distance were determined from the X-ray patterns. No differences in the starch nanostructure between the three different cultivars were detected. However, tuber immaturity was detected by X-ray scattering methods when large numbers of immature and mature samples were measured and the results were compared. The present study shows that no significant changes occurred in the nanostructures of starches resulting from hybridizations of potato cultivars.

Growing healthy sweetpotato: best practices for producing planting material

Sweetpotato is a major food crop in Papua New Guinea, with about 2.9 million tonnes grown each year. But sweetpotato is prone to pests and diseases, particularly viruses, which can significantly reduce yields. Because there are no varieties known to be resistant to viruses, the next best solution is to produce planting material that is free from infection, and to make this readily available to growers. This manual is aimed at researchers and technicians, and describes how to test for sweetpotato viruses and to keep vines free from infection. The methods described should help locals in PNG and other Pacific nations produce disease-free planting material for sweetpotato and other root and tuber crops.

Streptomyces scabies and S. turgidiscabies as pathogens causing potato common scab, and potential methods for their control

Tieteellinen tiivistelmä Common scab is one of the most important soil-borne diseases of potato (Solanum tuberosum L.) in many potato production areas. It is caused by a number of Streptomyces species, in Finland the causal agents are Streptomyces scabies (Thaxter) Lambert & Loria and S. turgidiscabies Takeuchi. The scab-causing Streptomyces spp. are well-adapted, successful plant pathogens that survive in soil also as saprophytes. Control of these pathogens has proved to be difficult. Most of the methods used to manage potato common scab are aimed at controlling S. scabies, the most common of the scab-causing pathogens. The studies in this thesis investigated S. scabies and S. turgidiscabies as causal organisms of common scab and explored new approaches for control of common scab that would be effective against both species. S. scabies and S. turgidiscabies are known to co-occur in the same fields and in the same tuber lesions in Finland. The present study showed that both these pathogens cause similar symptoms on potato tubers, and the types of symptoms varied depending on cultivar rather than the pathogen species. Pathogenic strains of S. turgidiscabies were antagonistic to S. scabies in vitro indicating that these two species may be competing for the same ecological niche. In addition, strains of S. turgidiscabies were highly virulent in potato and they tolerated lower pH than those of S. scabies. Taken together these results suggest that S. turgidiscabies has become a major problem in potato production in Finland. The bacterial phytotoxins, thaxtomins, are produced by the scab-causing Streptomyces spp. and are essential for the induction of scab symptoms. In this study, thaxtomins were produced in vitro and four thaxtomin compounds isolated and characterized. All four thaxtomins induced similar symptoms of reduced root and shoot growth, root swelling or necrosis on micro-propagated potato seedlings. The main phytotoxin, thaxtomin A, was used as a selective agent in a bioassay in vitro to screen F1 potato progeny from a single cross. Tolerance to thaxtomin A in vitro and scab resistance in the field were correlated indicating that the in vitro bioassay could be used in the early stages of a resistance breeding program to discard scab-susceptible genotypes and elevate the overall levels of common scab resistance in potato breeding populations. The potential for biological control of S. scabies and S. turgidiscabies using a non-pathogenic Streptomyces strain (346) isolated from a scab lesion and S. griseoviridis strain (K61) from a commercially available biocontrol product was studied. Both strains showed antagonistic activity against S. scabies and S. turgidiscabies in vitro and suppressed the development of common scab disease caused by S. turgidiscabies in the glasshouse. Furthermore, strain 346 reduced the incidence of S. turgidiscabies in scab lesions on potato tubers in the field. These results demonstrated for the first time the potential for biological control of S. turgidiscabies in the glasshouse and under field conditions and may be applied to enhance control of common scab in the future.

Perunan Y-viruksen testaaminen korkeassa happi-hiilidioksidipitoisuudessa idätetyistä perunoista

Perunalla (Solanum tuberosum L.) tällä hetkellä maailmanlaajuisesti eniten sato- ja laatutappioita aiheuttaa perunan Y-virus (PVY). Vaikka pelkän Y-viruksen aiheuttamaa satotappiota on vaikea mitata, on sen arvioitu olevan 20-80 %. Viruksen tärkein leviämistapa on viroottinen siemenperuna. Korkealaatuinen siemenperuna on edellytys ruoka-, ruokateollisuus- ja tärkkelysperunan tuotannolle. Kasvuston silmämääräinen tarkastelu aliarvioi yleensä Y-viruksen esiintyvyyttä. Laboratoriotestauksen avulla saadaan tarkempi tieto pellolta korjatun sadon saastunta-asteesta. Ongelmana Y-viruksen testaamisessa on, että sitä ei havaita dormanssissa olevista perunoista otetuista näytteistä yhtä luotettavasti kuin jo dormanssin ohittaneista perunoista testattaessa. Erilaisia menetelmiä kemikaaleista (Rindite, bromietaani) kasvihormoneihin (mm. gibberelliinihappo) ja varastointiolosuhteiden muutoksiin (kylmä- ja lämpökäsittely) on kokeiltu perunan dormanssin purkamiseen, mutta tulokset ovat olleet vaihtelevia. Tässä tutkielmassa perunan dormanssin purkamiseen käytettiin happi-hiilidioksidikäsittelyä (O2 40 % ja CO2 20 %) eripituisina käsittelyaikoina. Tarkoituksena oli selvittää, vaikuttaako käsittely perunan itämiseen ja dormanssin luontaista aikaisempaan purkautumiseen tai Y-viruksen havaitsemiseen. Lisäksi haluttiin selvittää, voiko Y-viruksen määrittämisen ELISA-testillä (Enzyme Linked Immunosorbent Assay) tehdä yhtä luotettavasti myös muista kasvinosista (mukula, itu), kuin tällä hetkellä yleisesti käytetystä perunan lehdestä. Idätyskäsittelyn vaikutuksista dormanssin purkautumiseen saatiin vaihtelevia, eikä kovinkaan yleistettäviä tuloksia. Käsittelyn ei myöskään havaittu vaikuttavan PYY-viroottisuuden havaitsemiseen eri näytemateriaaleilla testattaessa. Kun eri kasvinosien toimivuutta testissä vertailtiin, mukulamateriaalin todettiin aliarvioivan PVY-viroottisuutta kaikissa kokeissa. Myös itumateriaali aliarvioi pääsääntöisesti PVY-viroottisuutta ELISA:lla tehdyissä määrityksissä. Luotettavin testimateriaali oli perunan lehti.

Ethnobotany of the Monpa ethnic group at Arunachal Pradesh, India

Background: The present paper documents the uses of plants in traditional herbal medicine for human and veterinary ailments, and those used for dietary supplements, religious purpose, local beverage, and plants used to poison fish and wild animals. Traditional botanical medicine is the primary mode of healthcare for most of the rural population in Arunachal Pradesh. Materials and methods: Field research was conducted between April 2006 and March 2009 with randomly selected 124 key informants using semi-structured questionnaire. The data obtained was analyzed through informant consensus factor (F(IC)) to determine the homogeneity of informant's knowledge on medicinal plants. Results: We documented 50 plants species belonging to 29 families used for treating 22 human and 4 veterinary ailments. Of the medicinal plants reported, the most common growth form was herbs (40%) followed by shrubs, trees, and climbers. Leaves were most frequently used plant parts. The consensus analysis revealed that the dermatological ailments have the highest F(IC) (0.56) and the gastro-intestinal diseases have F(IC) (0.43). F(IC) values indicated that there was high agreement in the use of plants in dermatological and gastro-intestinal ailments category among the users. Gymnocladus assamicus is a critically rare and endangered species used as disinfectant for cleaning wounds and parasites like leeches and lice on livestocks. Two plant species (Illicium griffithii and Rubia cordifolia) are commonly used for traditional dyeing of clothes and food items. Some of the edible plants recorded in this study were known for their treatment against high blood pressure (Clerodendron colebrookianum), diabetes mellitus (Momordica charantia), and intestinal parasitic worms like round and tape worms (Lindera neesiana, Solanum etiopicum, and Solanum indicum). The Monpas of Arunachal Pradesh have traditionally been using Daphne papyracea for preparing hand-made paper for painting and writing religious scripts in Buddhist monasteries. Three plant species (Derris scandens, Aesculus assamica, and Polygonum hydropiper) were frequently used to poison fish during the month of June-July every year and the underground tuber of Aconitum ferrox is widely used in arrow poisoning to kill ferocious animals like bear, wild pigs, gaur and deer. The most frequently cited plant species; Buddleja asiatica and Hedyotis scandens were used as common growth supplements during the preparation of fermentation starter cultures. Conclusion: The traditional pharmacopoeia of the Monpa ethnic group incorporates a myriad of diverse botanical flora. Traditional knowledge of the remedies is passed down through oral traditions without any written document. This traditional knowledge is however, currently threatened mainly due to acculturation and deforestation due to continuing traditional shifting cultivation. This study reveals that the rural populations in Arunachal Pradesh have a rich knowledge of forest-based natural resources and consumption of wild edible plants is still an integral part of their socio-cultural life. Findings of this documentation study can be used as an ethnopharmacological basis for selecting plants for future phytochemical and pharmaceutical studies.

Development of micro-shock wave assisted dry particle and fluid jet delivery system

Small quantity of energetic material coated on the inner wall of a polymer tube is proposed as a new method to generate micro-shock waves in the laboratory. These micro-shock waves have been harnessed to develop a novel method of delivering dry particle and liquid jet into the target. We have generated micro-shock waves with the help of reactive explosive compound high melting explosive (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) and traces of aluminium] coated polymer tube, utilising 9 J of energy. The detonation process is initiated electrically from one end of the tube, while the micro-shock wave followed by the products of detonation escape from the open end of the polymer tube. The energy available at the open end of the polymer tube is used to accelerate tungsten micro-particles coated on the other side of the diaphragm or force a liquid jet out of a small cavity filled with the liquid. The micro-particles deposited on a thin metal diaphragm (typically 100-mu m thick) were accelerated to high velocity using micro-shock waves to penetrate the target. Tungsten particles of 0.7 mu m diameter have been successfully delivered into agarose gel targets of various strengths (0.6-1.0 %). The device has been tested by delivering micro-particles into potato tuber and Arachis hypogaea Linnaeus (ground nut) stem tissue. Along similar lines, liquid jets of diameter 200-250 mu m (methylene blue, water and oils) have been successfully delivered into agarose gel targets of various strengths. Successful vaccination against murine salmonellosis was demonstrated as a biological application of this device. The penetration depths achieved in the experimental targets are very encouraging to develop a future device for biological and biomedical applications.

Investigations on micro-blast wave assisted metal foil forming for biomedical applications

The deformation dynamics of metal foils (<0.25 mm thick) subjected to micro-blast wave are presented in this paper. The energy of micro-blast wave emanating from the open end of a polymer tube is used to deliver micro-particles for bio-medical applications. In these experiments metal foils are used to transfer the energy of the micro-blast wave to the micro-particles. Using cubic root scaling law the over pressure of the blast wave at the open end of the polymer tube is estimated and using this peak plate over pressure is estimated. The finite element analysis is used to estimate the velocity profile of the deforming metal foils. The finite element analysis results are compared with experimental results for the maximum deformation and deformed shape. Based on the deformation velocity, metal foil to be used for experiments is selected. Among the materials investigated 0.1 mm thick brass foil has the maximum velocity of 205 m/s and is used in the experiments. It is found from finite element analysis that the particles deposited within a radius of 0.5 mm will leave the foil with nearly equal velocity (error < 5%). The spray cone angle which is the angle of deviation of the path of particles from the axis of the polymer tube is also estimated and found to be less than 7 degrees up to a radius of 0.75 mm. Illustrative experiments are carried out to deliver micro particles (0.7 mu m diameter tungsten) into plant tissues. Particle penetration depth up to 460 mu m was achieved in ground tissue of potato tuber. (C) 2012 Elsevier Ltd. All rights reserved.

Generic identity of Camptorrhiza indica (Colchicaceae) based on cytogenetics and molecular phylogenetics

The tribe Iphigenieae (Colchicaceace, Liliales) includes two genera, viz. Camptorrhiza and Iphigenia, which are distributed in Africa, India, and Australasia. Iphigenia is represented by 12 species, of which six occur in India while Camptorrhiza comprises one species each in Africa (C. strumosa) and India (C. indica). The genus Camptorrhiza possesses a knee-shaped tuber attached to the corms, filaments with a thick bulge in the middle and styles with single stigma. Iphigenia on the other hand lacks knee-shaped tuber, bears linear filaments and has styles with three stigmas. Camptorrhiza indica possesses ovoid corms, linear filaments and styles with a single stigma. These characters are intermediate between Iphigenia and Camptorrhiza and hence we studied the cytogenetics and phylogenetic placement of this species to ascertain its generic identity. Somatic chromosome count (2n = 22) and karyotypic features of C. indica are very similar to that of Iphigenia species. Molecular phylogenetic studies based on atpB-rbcL, rps16, trnL, and trnL-F regions showed that C. indica is nested within a lineage of Indian Iphigenia species. Thus, C. indica was reduced to a species of Iphigenia, i.e., I. ratnagirica. Camptorrhiza is now a monotypic genus restricted only to southern Africa. A key to the Indian Iphigenia species is provided. In addition, a new combination Wurmbea novae-zelandiae is proposed for Iphigenia novae-zelandiae.

High-Temperature Effects on Growth and Propagule Formation in Hydrilla Biotypes

In consecutive greenhouse studies, growth and propagule formation were examined first in monoecious hydrilla [Hydrilla verticillata (L.f.) Royle], then in dioecious hydrilla, at three temperature levels (25, 30, and 35 C) and contrasted over three periods of growth (8, 12 and 16 wks). Each biotype was grown under natural photoperiods, decreasing from 14 hrs (in Oct, Nov, and Dec). For both biotypes, total biomass and root-to-shoot ratios were significantly reduced at 35 C; greater biomass was produced both at 25 and 30C. Increases in growth period generally enhanced total biomass and shoot production; however, shoot length was unresponsive to growth periods beyond 8 wks. The 35C treatment strongly impeded tuber formation and eliminat4ed the production of axillary turions; the number and biomass of these propagules peaked at lower temperatures under short photoperiods after 12 to 16 wks. Shoot elongation was stimulated with increases in temperature and was especially pronounced in the dioecious biotype. Notably, in the monoecious biotype, the number of shoots as a potential source of fragments, and tuber production (although reduced) occurred at relatively high levels under unfavorably hihg-temperature (35C) conditions. These results suggest that monoecious hydrilla may be better adapted to high temperatures than previously shown, and that the distribution of both biotypes in the U.S. could overlap further in southern states.

Distribution and Density of Vegetative Hydrilla Propagules in the Sediments of Two New Zealand Lakes

The distribution and density of hydrilla (Hydrilla verticillata (L.f.)Royle) turions and tubers in two New Zealand lakes were assessed by sampling cores of sediment from Lakes Tutira and Waikapiro each year from 1994 to 1997. Turion and tuber density differed with water depth, with maximum numbers of tubers and turions found in the 1-2 m and 1.5-4m water depth ranges respectively. A high turion to tuber ratio was observed, with turions accounting for over 80% of propagules. The relatively low numbers of turions and tubers compared with other reports, and the distribution of most tubers within the shallow water is likely to be associated with black swan grazing (Cygnus atratus Latham), with maintains a canopy of hydrilla consistently 1 m below the water surface.