Prediction of reinforcement corrosion in concrete and its effects on concrete cracking and strength reduction

Based on extensive research on reinforcing steel corrosion in concrete in the past decades, it is now possible to estimate the effect of the progression of reinforcement corrosion in concrete infrastructure on its structural performance. There are still areas of considerable uncertainty in the models and in the data available, however This paper uses a recently developed model for reinforcement corrosion in concrete to improve the estimation process and to indicate the practical implications. In particular stochastic models are used to estimate the time likely to elapse for each phase of the whole corrosion process: initiation, corrosion-induced concrete cracking, and structural strength reduction. It was found that, for practical flexural structures subject to chloride attacks, corrosion initiation may start quite early in their service life. It was also found that, once the structure is considered to be unserviceable due to corrosion-induced cracking, there is considerable remaining service life before the structure can be considered to have become unsafe. The procedure proposed in the paper has the potential to serve as a rational tool for practitioners, operators, and asset managers to make decisions about the optimal timing of repairs, strengthening, and/or rehabilitation of corrosion-affected concrete infrastructure. Timely intervention has the potential to prolong the service life of infrastructure.

Assessment of fibronectin as a potential new clinical tool in andrology.

In this prospective clinical study, 892 patients with normal and impaired semen were examined in order to investigate the correlation between the concentration of fibronectin in seminal plasma and the motility of spermatozoa. The fibronectin concentration in seminal plasma, total sperm motility and linear sperm motility were measured. We report here a significant negative correlation between the fibronectin concentration in seminal plasma and total sperm motility (r=-0.3474). There was no link between varicocele and vasectomy, or between varicocele and variation in the concentration of fibronectin. It is concluded that higher concentrations of the acute-phase protein fibronectin may be a cause of severe reduction in sperm motility. The investigation of fibronectin concentrations in seminal fluid could be a new and helpful clinical tool in the assessment of male fertility.

Optical coherence tomography is a valuable tool in the study of the effects of microneedle geometry on skin penetration characteristics and in-skin dissolution.

In this study, we used optical coherence tomography (OCT) to extensively investigate, for the first time, the effect that microneedle (MN) geometry (MN height, and MN interspacing) and force of application have upon penetration characteristics of soluble poly(methylvinylether-co-maleic anhydride, PMVE/MA) MN arrays into neonatal porcine skin in vitro. The results from OCT investigations were then used to design optimal and suboptimal MN-based drug delivery systems and evaluate their drug delivery profiles cross full thickness and dermatomed neonatal porcine skin in vitro. It was found that increasing the force used for MN application resulted in a significant increase in the depth of penetration achieved within neonatal porcine skin. For example, MN of 600 µm height penetrated to a depth of 330 µm when inserted at a force of 4.4 N/array, while the penetration increased significantly to a depth of 520 µm, when the force of application was increased to 16.4 N/array. At an application force of 11.0 N/array it was found that, in each case, increasing MN height from 350 to 600 µm to 900 µm led to a significant increase in the depth of MN penetration achieved. Moreover, alteration of MN interspacing had no effect upon depth of penetration achieved, at a constant MN height and force of application. With respect to MN dissolution, an approximate 34% reduction in MN height occurred in the first 15 min, with only 17% of the MN height remaining after a 3-hour period. Across both skin models, there was a significantly greater cumulative amount of theophylline delivered after 24 h from an MN array of 900 µm height (292.23 ± 16.77 µg), in comparison to an MN array of 350 µm height (242.62 ± 14.81 µg) (p < 0.001). Employing full thickness skin significantly reduced drug permeation in both cases. Importantly, this study has highlighted the effect that MN geometry and application force have upon the depth of penetration into skin. While it has been shown that MN height has an important role in the extent of drug delivered across neonatal porcine skin from a soluble MN array, further studies to evaluate the full significance of MN geometry on MN mediated drug delivery are now underway. The successful use of OCT in this study could prove to be a key development for polymeric MN research, accelerating their commercial exploitation.

Photochemical reduction of oxygen adsorbed to nanocrystalline TiO2 films: A transient absorption and oxygen scavenging study of different TiO2 preparations

Transient absorption spectroscopy (TAS) has been used to study the interfacial electron-transfer reaction between photogenerated electrons in nanocrystalline titanium dioxide (TiO2) films and molecular oxygen. TiO2 films from three different starting materials (TiO2 anatase colloidal paste and commercial anatase/rutile powders Degussa TiO2 P25 and VP TiO2 P90) have been investigated in the presence of ethanol as a hole scavenger. Separate investigations on the photocatalytic oxygen consumption by the films have also been performed with an oxygen membrane polarographic detector. Results show that a correlation exists between the electron dynamics of oxygen consumption observed by TAS and the rate of oxygen consumption through the photocatalytic process. The highest activity and the fastest oxygen reduction dynamics were observed with films fabricated from anatase TiO2 colloidal paste. The use of TAS as a tool for the prediction of the photocatalytic activities of the materials is discussed. TAS studies indicate that the rate of reduction of molecular oxygen is limited by interfacial electron-transfer kinetics rather than by the electron trapping/detrapping dynamics within the TiO2 particles.

Growth of Gold Nanocrystals Incorporated with Magnetic Microbead-based Separation as a Tool for Quantification of Biological Interactions

Au nanoparticles (AuNPs) have been widely used not only as optical labels or ‘weight” labels for the detections of biorecognition events but also an amplifier of surface plasmon resonance biosensors. The intrinsic property of gold nuclei composing of a group of Au atoms to catalyze the reduction of metal ions on the NPs and thereby to enlarge the metallic nanoparticles is employed in different biosensing paths. In a solution containing Au+ ions (e.g. HAuCl4) and the Au clusters, hydrated electrons which are reduced from oxidation of reducers (H2O2, sodium citrate, ascorbic acid, or NaBH4) will be used to reduce the Au+ ion leading to the deposition of Au+ to the Au0 (Au clusters). The reaction will be catalyzed continuously by the Au0 until the Au+ ions and hydrated electrons are exhausted. As a result, the AuNPs will be grown and their optical properties are also changed. If the AuNP nanoclusters are used as probes, the color change will be dependent on amount of analytes, thus give a quantitative monitoring of the analytes.

In this study, we incorporate the use of magnetic beads with the nanocrystalline growth to quantify a target protein based on immunoreactions. Prostate specific antigen (PSA) is chosen as the target analyte because of its values in diagnosis of prostate cancer. A double-sandwiched immunoassay is performed by gold-tagged monoclonal PSA antibody-PSA antigen – magnetic bead-tagged polyclonal PSA antibody interactions. After the immunoreactions, the target analytes are preconcentrated and separated by the magnetic beads while the nanogrowth plays a role of colorimetric signal developer.

The result shows that this is a very sensitive, robust and excellent strategy to detect biological interactions. PSA antigen is detected at femtomolar level with very high specificity under the presence of undesired proteins of crude samples. Furthermore, the method also shows great potential to detect other biological interactions. More details will be described in our presentation.

Ecotoxicity tests using the green algae chlorella vulgaris — a useful tool in hazardous effluents management

The treatment efficiency of laboratory wastewaters was evaluated and ecotoxicity tests with Chlorella vulgaris were performed on them to assess the safety of their environmental discharge. For chemical oxygen demand wastewaters, chromium (VI), mercury (II) and silver were efficiently removedby chemical treatments.Areduction of ecotoxicitywas achieved; nevertheless, an EC50 (effective concentration that causes a 50% inhibition in the algae growth) of 1.5% (v/v) indicated still high level of ecotoxicity. For chloride determination wastewaters, an efficient reduction of chromium and silver was achieved after treatment. Regarding the reduction of ecotoxicity observed, EC50 increased from 0.059% to 0.5%, only a 0.02% concentration in the aquatic environment would guarantee no effects. Wastewaters containing phenanthroline/iron (II) complex were treated by chemical oxidation. Treatmentwas satisfactory concerning chemical parameters, although an increase in ecotoxicitywas observed (EC50 reduced from 0.31% to 0.21%). The wastes from the kinetic study of persulphate and iodide reaction were treated with sodium bisulphite until colour was removed. Although they did not reveal significant ecotoxicity, only over 1% of the untreated waste produced observable effects over algae. Therefore, ecotoxicity tests could be considered a useful tool not only in laboratory effluents treatment, as shown, but also in hazardous wastewaters management.

Drilling tool geometry evaluation for reinforced composite laminates

In this work, a comparative study on different drill point geometries and feed rate for composite laminates drilling is presented. For this goal, thrust force monitoring during drilling, hole wall roughness measurement and delamination extension assessment after drilling is accomplished. Delamination is evaluated using enhanced radiography combined with a dedicated computational platform that integrates algorithms of image processing and analysis. An experimental procedure was planned and consequences were evaluated. Results show that a cautious combination of the factors involved, like drill tip geometry or feed rate, can promote the reduction of delamination damage.

Le burnout de l'élève : validation du School Burnout Inventory, identification de facteurs de risque et de protection et exploration des liens avec la consomation de substances

Syndrome de stress scolaire chronique, le bumout de l'élève ou bumout scolaire suscite un intérêt grandissant mais ses déterminants sont encore peu connus. De plus, ce phénomène est rarement étudié chez les adolescents francophones et aucune recherche n'a encore été menée en Suisse. Par conséquent, au travers de ce travail de thèse, nous proposons d'étendre la recherche sur le bumout scolaire aux adolescents de Suisse francophone et d'apporter des précisions sur ses facteurs de risque ou de protection. Pour ce faire, nous avons mené deux recherches empiriques impliquant 861 adolescents âgés de 14 à 18 ans et scolarisés en Suisse francophone. Ces adolescents ont répondu à une série d'échelles évaluant notamment le burnout scolaire, le stress scolaire, le soutien social, la consommation de substances et le parcours scolaire. Les résultats montrent tout d'abord que l'inventaire de Burnout Scolaire, version française du School Burnout lnventory, est un outil fiable et valide. Ensuite, il apparaît que le burnout scolaire touche jusqu'à 24% des adolescents de Suisse francophone et que ce dernier se caractérise par une perte d'intérêt pour l'école, une grande remise en question du sens du travail scolaire ainsi qu'un sentiment élevé d'insuffisance à l'école. Il apparaît également que le stress scolaire lié au succès et à l'avenir scolaire augmente le risque de bumout alors que le soutien des parents et des enseignants le diminue. Par ailleurs, nous mettons en évidence que l'effet du soutien social sur le burnout scolaire est médiatisé par le stress scolaire, ce qui souligne d'autant plus le rôle protecteur du soutien social. Nos résultats montrent également que les niveaux de bumout scolaire varient en fonction, d'une part de certaines caractéristiques du contexte scolaire et d'autre part en fonction de la sévérité de la consommation de substances des adolescents. Enfin, les connaissances accumulées dans ce travail et leur mise en perspective dans un modèle d'intervention précoce permettent d'insister sur le rôle de l'école et des professionnels de l'école dans la prévention du burnout scolaire. -- Syndrome of chronic school stress, pupil 's bumout or school bumout is of growing interest. However, little is known about its determinants. Moreover, this phenomenon is rarely studied in French speaking adolescents and no research has yet been conducted in Switzerland. Therefore, through this thesis, we propose to extend the research on school bumout to Swiss French speaking adolescents and to clarify its risk and protective factors. To achieve this, we conducted two empirical research involving 861 adolescents aged 14 to 18 and enrolled in the French part of Switzerland. These adolescents were asked to answer a questionnaire about school bumout, academic stress, social support, substance use and schooling. Results first show, that the French version of the School Bumout Inventory is a reliable and valid tool. lt then appears that school bumout affects up to 24% of adolescents in the French speaking part of Switzerland and that this phenomenon is characterized by a loss of interest in school, a great challenge to the sense of school work and a high sense of insufissance school. lt also appears that stress related to school success and academic future increases the risk of bumout while parents and teachers support decreases it. Moreover, we highlight that the effect of social support on school bumout is mediated by school stress, which further underscores the protective role of social support. Our results also show that school bumout levels vary depending on characteristics of the school context and on the severity of substance use of adolecents. Finally, the knowledge accumulated in this work and putting it onto perspective within early intervention model enable to insist on the role of school and school professionals in the prevention of school bumout

Validation of plant dynamic model by online and laboratory measurements – a tool to predict online COD loads out of production of mechanical printing papers

COD discharges out of processes have increased in line with elevating brightness demands for mechanical pulp and papers. The share of lignin-like substances in COD discharges is on average 75%. In this thesis, a plant dynamic model was created and validated as a means to predict COD loading and discharges out of a mill. The assays were carried out in one paper mill integrate producing mechanical printing papers. The objective in the modeling of plant dynamics was to predict day averages of COD load and discharges out of mills. This means that online data, like 1) the level of large storage towers of pulp and white water 2) pulp dosages, 3) production rates and 4) internal white water flows and discharges were used to create transients into the balances of solids and white water, referred to as “plant dynamics”. A conversion coefficient was verified between TOC and COD. The conversion coefficient was used for predicting the flows from TOC to COD to the waste water treatment plant. The COD load was modeled with similar uncertainty as in reference TOC sampling. The water balance of waste water treatment was validated by the reference concentration of COD. The difference of COD predictions against references was within the same deviation of TOC-predictions. The modeled yield losses and retention values of TOC in pulping and bleaching processes and the modeled fixing of colloidal TOC to solids between the pulping plant and the aeration basin in the waste water treatment plant were similar to references presented in literature. The valid water balances of the waste water treatment plant and the reduction model of lignin-like substances produced a valid prediction of COD discharges out of the mill. A 30% increase in the release of lignin-like substances in the form of production problems was observed in pulping and bleaching processes. The same increase was observed in COD discharges out of waste water treatment. In the prediction of annual COD discharge, it was noticed that the reduction of lignin has a wide deviation from year to year and from one mill to another. This made it difficult to compare the parameters of COD discharges validated in plant dynamic simulation with another mill producing mechanical printing papers. However, a trend of moving from unbleached towards high-brightness TMP in COD discharges was valid.

Evaluation of a treatment program for individuals with an intellectual disability who have high risk behaviours

In the past two decades numerous programs have emerged to treat individuals with developmental disabilities who have sexual offending behaviours. There has, however been very few studies that systematically examine the effectiveness of long term treatment with this population. The present research examines the therapeutic outcomes of a multi-modal behaviour approach with six individuals with intellectual disabilities previously charged with sexual assault. The participants also exhibited severe behavioural challenges that included verbal aggression, physical aggression, destruction and self-injury. These six participants (5 males, 1 female) were admitted to a Long Term Residential Treatment Program (LTRTP), due to the severity of their behaviours and due to their lack of treatment success in other programs. Individualized treatment plans focused on the reduction of maladaptive behaviours and the enhancing of skills such as positive coping strategies, socio-sexual knowledge, life skills, recreation and leisure skills. The treatment program also included psychiatric, psychological, medical, behavioural and educational interventions. The participants remained in the Long Term Residential Treatment Program (LTRTP) program from 181 to 932 days (average of 1.5 years). Pre and post treatment evaluations were conducted using the following tools: frequency of target behaviours, Psychopathology Inventory for Mentally Retarded Adults (PIMRA), Emotional Problems Scale (EPS), Socio-Sexual Knowledge and Attitudes Assessment Tool (SSKAAT-R) and Quality of Life Questionnaire (QOL-Q). Recidivism rates and the need for re-hospitalization were also noted for each participant. By offering high levels of individualized interventions, all six participants showed a 37 % rate of reduction in maladaptive behaviours with zero to low rates of inappropriate sexualbehaviour, there were no psychiatric hospitalizations, and there was no recidivism for 5 of 6 participants. In addition, medication was reduced. Mental health scores on the PIMRA were reduced across all participants by 25 % and scores on the Quality of Life Questionnaire increased for all participants by an average of 72 %. These findings add to and build upon the existing literature on long term treatment benefits for individuals with a intellectual disability who sexually offend. By utilizing an individualized and multimodal treatment approach to reduce severe behavioural challenges, not only can the maladaptive behaviours be reduced, but adaptive behaviours can be increased, mental health concerns can be managed, and overall quality of life can be improved.

Participants' perceptions of their involvement in a cardiovascular disease risk factor reduction program

A cardiovascular disease risk factor reduction program was implemented in the Niagara region. To gain an understanding of this program from the participants ' perspective, 10 participants of the program were interviewed to document their perceptions of what they learned in the program, their perceptions of their behaviour change and their perceptions of factors that facilitated or impeded any behaviour change. The learning style inventory and PET test were also given to the participants to further understand their perceptions. Findings unique to this study highlighted aspects of the andragogical model, self-directed learning theory, learning style preference and psychological type that were prominent in the participants' comments and perspectives. Implications for practice, theory development and further research are suggested.

Priming the Governance System for Climate Change Adaptation: The Application of a Social Ecological Inventory (SEI) to Engage Actors in Niagara, Canada

Adaptive systems of governance are increasingly gaining attention in respect to complex and uncertain social-ecological systems. Adaptive co-management is one strategy to make adaptive governance operational and holds promise with respect to community climate change adaptation as it facilitates participation and learning across scales and fosters adaptive capacity and resilience. Developing tools which hasten the realization of such approaches are growing in importance. This paper describes explores the Social Ecological Inventory (SEI) as a tool to 'prime' a regional climate change adaptation network. The SEI tool draws upon the social-ecological systems approach in which social and ecological systems are considered linked. SEIs bridge the gap between conventional stakeholder analysis and biological inventories and take place through a six phase process. A case study describes the results of applying an SEI to prime an adaptive governance network for climate change adaptation in the Niagara Region of Canada. Lessons learned from the case study are discussed and highlight how the SEI catalyzed the adaptive co-management process in the case. Future avenues for SEIs in relation to climate change adaptation emerge from this exploratory work and offer opportunities to inform research and adaptation planning.

Validity of a Quantitative Clinical Measurement Tool of Trunk Posture in Idiopathic Scoliosis

STUDY DESIGN: Concurrent validity between postural indices obtained from digital photographs (two-dimensional [2D]), surface topography imaging (three-dimensional [3D]), and radiographs. OBJECTIVE: To assess the validity of a quantitative clinical postural assessment tool of the trunk based on photographs (2D) as compared to a surface topography system (3D) as well as indices calculated from radiographs. SUMMARY OF BACKGROUND DATA: To monitor progression of scoliosis or change in posture over time in young persons with idiopathic scoliosis (IS), noninvasive and nonionizing methods are recommended. In a clinical setting, posture can be quite easily assessed by calculating key postural indices from photographs. METHODS: Quantitative postural indices of 70 subjects aged 10 to 20 years old with IS (Cobb angle, 15 degrees -60 degrees) were measured from photographs and from 3D trunk surface images taken in the standing position. Shoulder, scapula, trunk list, pelvis, scoliosis, and waist angles indices were calculated with specially designed software. Frontal and sagittal Cobb angles and trunk list were also calculated on radiographs. The Pearson correlation coefficients (r) was used to estimate concurrent validity of the 2D clinical postural tool of the trunk with indices extracted from the 3D system and with those obtained from radiographs. RESULTS: The correlation between 2D and 3D indices was good to excellent for shoulder, pelvis, trunk list, and thoracic scoliosis (0.81>r<0.97; P<0.01) but fair to moderate for thoracic kyphosis, lumbar lordosis, and thoracolumbar or lumbar scoliosis (0.30>r<0.56; P<0.05). The correlation between 2D and radiograph spinal indices was fair to good (-0.33 to -0.80 with Cobb angles and 0.76 for trunk list; P<0.05). CONCLUSION: This tool will facilitate clinical practice by monitoring trunk posture among persons with IS. Further, it may contribute to a reduction in the use of radiographs to monitor scoliosis progression.

Inventory management in public sector electrical industry in Kerala

The thesis entitled Inventory Management In Public Sector Electrical Industry In Kerala. Investigations were carried out on inventory management in public sector electrical industry in Kerala and suggest methods to improve their efficiency. Various aspects of inventory management, its scope and need in industry are detailed. The objectives of the present study concentrates to get an overall view of the system of inventory management, assess the positions and levels of inventory. It analyzes the inventory management policies and practices, the organizational set-up for materials by the electrical undertakings. The study examines the liquidity of the electrical undertakings as well as techniques of inventory management in the electrical industry in Kerala. Hypotheses state that the existing organizational systems and practices are inadequate to ensure efficient management of inventories in electrical industry. Introduction of scientific inventory techniques has a favourable effect on the workings of inventory departments. The financial performance of the public sector electrical undertakings is not at all satisfactory on account of the high raw material costs, heavy borrowings and huge interest burdens. The scope of this study is limited to the assessment of savings, in inventories of electrical products due to inventory management. The methodology of the study is to project the cost reduction of the inventory department on the basis of data collected and to validate this projection with the aid of analysis and survey. The limitations of the study is that the data obtained relate to the period 1989-90 and earlier and the current position is not available and uniform norms cannot be applied to evaluate different inventory management organisation.

Attribute reduction and missing value imputing with ANN: prediction of learning disabilities

Learning disability (LD) is a neurological condition that affects a child’s brain and impairs his ability to carry out one or many specific tasks. LD affects about 10% of children enrolled in schools. There is no cure for learning disabilities and they are lifelong. The problems of children with specific learning disabilities have been a cause of concern to parents and teachers for some time. Just as there are many different types of LDs, there are a variety of tests that may be done to pinpoint the problem The information gained from an evaluation is crucial for finding out how the parents and the school authorities can provide the best possible learning environment for child. This paper proposes a new approach in artificial neural network (ANN) for identifying LD in children at early stages so as to solve the problems faced by them and to get the benefits to the students, their parents and school authorities. In this study, we propose a closest fit algorithm data preprocessing with ANN classification to handle missing attribute values. This algorithm imputes the missing values in the preprocessing stage. Ignoring of missing attribute values is a common trend in all classifying algorithms. But, in this paper, we use an algorithm in a systematic approach for classification, which gives a satisfactory result in the prediction of LD. It acts as a tool for predicting the LD accurately, and good information of the child is made available to the concerned