Um estudo sobre o endurecimento, o processamento e propriedades mecânicas de uma liga de alumínio da série 3XXX tipo AA 3104 com adições de zinco

Modificações na composição química e no processamento termomecânico têm sido algumas das várias alternativas estudadas, para melhorar o desempenho de ligas de alumínio tradicionais. Neste trabalho foi modificada a composição de uma liga Al-Mn-Mg do tipo AA 3104, endurecível por deformação, adicionando-se diversos teores de zinco, transformando-a numa liga Al-Mn-Mg(Zn), endurecível por precipitação. O objetivo foi estudar e quantificar os efeitos do zinco sobre o processamento termomecânico e as propriedades mecânicas da liga modificada. Ligas com teores de zinco entre 0,03 a 1,52% foram fundidas e processadas obtendo-se um encruamento semelhante a condição H-19 industrial, denominada rota R. Ligas com teores de zinco entre 1,14 a 2,17% foram fundidas e processadas segundo três diferentes rotas: na rota S, o recozimento da rota R foi substituído por solubilização antes da laminação a frio; nas rotas E3H e E6H, as tiras laminadas a frio foram envelhecidas em dois estágios: 121°C por três horas para as duas rotas, mais três horas para a rota E3H e seis para a rota EH a 163°. A tensão de escoamento (SIGMA IND E) e a resistência à tração (SIGMA IND T) para a rota R aumentaram da ordem de 18% e 19% respectivamente, com o aumento do teor de zinco, enquanto o alongamento (E) permaneceu em torno de 4,5%. As propriedades mecânicas (SIGMA IND E SIGMA T E ) AUMENTARAM EM TORNO DE 25%, 31% E 27%, respectivamente, para a rota S. Considerando concentrações aproximadamente iguais de zinco, não foram verificadas diferenças significativas para (SIGMA E SIGMA T), entre as rotas R E S, no entanto, a rota S apresentou alongamento médio maior que a rota R da ordem 44%. Os menores valores de (SIGMA IND E SIGMA IND T) e os maiores valores de E foram obtidos para a rota E6H.

Estudo da fragilização ao revenido em aço liga de 2,25CR-1MO através do ensaio de indentificação instrumentada

2,25Cr-1Mo alloy steels are widely used in petrochemical plant equipments working in high temperature conditions because of their good mechanical proprieties in these conditions. Although, when exposed for a long time at high temperature, in the rage of 343 °C to 593 °C, may present the temper embrittlement phenomenon. The component named stripper of assembly converter of fluid catalytic cracking unit (UFCC) of studied plant is manufactured using this material, which is subject to temper embrittlement. The phenomenon of temper embrittlement refers to progressive lose of toughness, making the material brittle. With embrittlement, equipaments manufactured with this material are under risks to suffer brittle fracture in the cool down and start-up situations of them, which can cause catastrophic failures. By this reason, this research studies presence of temper ebrittlement phenomenon on this material. To verify the toughness of the material is conventionally used charpy V-notch test. However, this test requires the removing of samples of the material to make specimens. This fact becomes critical when talk about structural components of an equipment. So, this research also studies a non-destructive test that can be executes in-situ, known as instrumented indentation, as an alternative detection of the phenomenon at the component stripper, by comparative of the mechanical proprieties obtained by conventional tests in similar samples

Influência da adição do nióbio no comportamento mecânico e microestrutural do aço SAE 6150

Pós-graduação em Engenharia Mecânica - FEG

Caracterização microestrutural e propriedades mecânicas em pinos para transmissão mecânica de aço inoxidável martensítico e pinos fusíveis de latão em chave de alta tensão

Pós-graduação em Engenharia Mecânica - FEB

EMERSON AS A ROMANTICIST

It was the romanticists who tended to write poetry of “autobiography,” who inquired of themselves concerning themselves, and assumed that the world was interested in what they found. Nor was the habit of self-consciousness regarding the poetic office let drop by their successors. That the words poet and poetry were so often on Emerson’s lips would be evidence enough to students of literature, in its changing temper and shifting modes, of his probable localization in time. It is also evidence of his relation to certain European movements of thought to which he gave—comparatively late in their currency and much tempered —American expression. In his doctrine of the superiority and the aloofness of the poet, of the latter’s severance from others to whom he yet bears messages of light, in his self-sufficiency and his sovereignty, his belief in the intrinsic goodness of nature and of man, and his concern with poetic thought rather than poetic form, Emerson may be termed the American representative of ideas which already had had wide circulation in Europe. In great part they emanated from Rousseau, and some of them, especially the gospel of the rights and the supremacy of the individual, had metamorphosed the politics and the map of Europe as well as its literature.

Band structure of Heusler compounds studied by photoemission and tunneling spectroscopy

Heusler compounds are key materials for spintronic applications. They have attracted a lot of interest due to their half-metallic properties predicted by band structure calculations.rnThe aim of this work is to evaluate experimentally the validity of the predictions of half metallicity by band structure calculations for two specific Heusler compounds, Co2FeAl0.3Si0.7 and Co2MnGa. Two different spectroscopy methods for the analysis of the electronic properties were used: Angular Resolved Ultra-violet Photoemission Spectroscopy (ARUPS) and Tunneling Spectroscopy.rnHeusler compounds are prepared as thin films by RF-sputtering in an ultra-high vacuum system. rnFor the characterization of the samples, bulk and surface crystallographic and magnetic properties of Co2FeAl0.3Si0.7 and Co2MnGa are studied. X-ray and electron diffraction reveal a bulk and surface crossover between two different types of sublattice order (from B2 to L21) with increasing annealing temperature. X-ray magnetic circular dichroism results show that the magnetic properties in the surface and bulk are identical, although the magnetic moments obtained are 5% below from the theoretically predicted.rnBy ARUPS evidence for the validity of the predicted total bulk density of states (DOS) was demonstrated for both Heusler compounds. Additional ARUPS intensity contributions close to the Fermi energy indicates the presence of a specific surface DOS. Moreover, it is demonstrated that the crystallographic order, controlled by annealing, plays an important role on brodening effects of DOS features. Improving order resulted in better defined ARUPS features.rnTunneling magnetoresistance measurements of Co2FeAl0.3Si0.7 and Co2MnGa based MTJ’s result in a Co2FeAl0.3Si0.7 spin polarization of 44%, which is the highest experimentally obtained value for this compound, although it is lower than the 100% predicted. For Co2MnGa no high TMR was achieved.rnUnpolarized tunneling spectroscopy reveals contribution of interface states close to the Fermi energy. Additionally magnon excitations due to magnetic impurities at the interface are observed. Such contributions can be the reason of a reduced TMR compared to the theoretical predictions. Nevertheless, for energies close to the Fermi energy and for Co2MnGa, the validity of the band structure calculations is demonstrated with this technique as well.

Charakterisierung antiker Keramik und ihrer Herstellungstechniken mit mineralogischen Methoden am Beispiel Mayener Gebrauchskeramik

Mehr als hundert Jahre archäologischer Forschung haben gezeigt, dass in Mayen in römischer und mittelalterlicher Zeit eines der wichtigsten europäischen Produktionszentren für die Herstellung qualitätsvoller Gebrauchskeramik bestand. Im Rahmen dieser Studie wurden vier Befundkomplexe aus Töpfereisiedlungen vom 4. bis in das 14. Jahrhundert untersucht. Genauer handelt es sich um Keramik aus zwei spätantiken Brennanlagen des 4. Jahrhunderts im Bereich der Flur „Auf der Eich“ an den Straßen „Am Sonnenhang“ und „Frankenstraße“. Weiterhin konnte Material aus zwei Töpferofenfüllungen des 5. bis 9. Jahrhunderts analysiert werden, das 1975 auf dem Grundstück 55 an der „Siegfriedstraße“ in Brennanlagen entdeckt wurde. Hinzu kam Brenngut aus elf Töpferöfen des späten 8. bis 14. Jahrhunderts, welches in den so genannten „Burggärten“ der Genovevaburg von Mayen in den Jahren 1986/87 durch die archäologische Denkmalpflege in Koblenz geborgen wurde. Die mineralogischen Untersuchungen zur Charakterisierung der „Mayener Keramik“ wurden systematisch an den Keramikmaterialien aus diesen Fundstellen durchgeführt. Mittelalterliche Keramik aus Bornheim-Walberberg, Brühl-Eckdorf, Höhr-Grenzhausen, Langerwehe, Frechen, Brühl-Pingsdorf, Paffrath, Raeren, Ratingen-Breitscheid, Siegburg-Seehofstraße, Siegburg-Scherbenhügel, Fredelsloh und Brühl-Badorf konnte für diese Arbeit als Referenzmaterialien ebenfalls untersucht werden. Provenienzanalysen wurden an Keramikproben aus 27 Fundorten, die makroskopisch nach Mayener Ware aussehen, mit mineralogischen Methoden durchgeführt, um sie der Fundregion Mayen eindeutig zuordnen zu können.rnPhasenanalyse, chemische Analyse und thermische Analyse wurden an Keramik sowie Ton durchgeführt. Die Phasenanalyse wurde zur Bestimmung der mineralischen Zusammensetzung von Grundmasse und Magerungsmittel (Röntgendiffraktometrie (XRD), Polarisationsmikroskop, Mikro-Raman-Spektroskopie) verwendet. Die chemische Zusammensetzung wurde durch Röntgenfluoreszenzanalyse (RFA) ermittelt. Elektronenstrahlmikroanalyse (ESMA) und Laser-Massenspektrometrie mit induktiv gekoppeltem Plasma (LA-ICP-MS) wurden bei den Proben, bei denen weniger als 2g Material zur Verfügung standen, eingesetzt. Brennexperimente wurden am originalen Rohstoff der Keramik aus den „Burggärten“ der Genovevaburg durchgeführt. Gebrannter Ton wurde durch Röntgendiffraktometrie (XRD), Infrarotspektroskopie (IR) und Differential-Thermoanalyse (DTA) analysiert. rnAnhand der Messergebnisse lässt sich die Mayener Keramik aus den vier Fundplätzen in zwei Typen zusammenzufassen: der mit Feldspat-reichem Sand gemagerte römische Typ und der mit Quarz-reichem Sand gemagerte mittelalterliche Typ. Die Änderung des Magerungsmittels von Feldspat- zu Quarzsand weist eine technische Entwicklung zu höheren Brenntemperaturen von der Römerzeit bis in das Mittelalter nach. Nach der Untersuchung und dem Vergleich mit den Referenzkeramikgruppen ist festzustellen, dass durch multivariate Statistikanalysen der chemischen Komponenten die Charakterisierung der Keramik und eine Differenzierung zwischen den Keramikgruppen gelingt. Diese Erkenntnisse bildeten die Basis für Provenienzanalysen. 16 Fundorte können durch Provenienzanalyse sicher als Exportregionen der Mayener Ware festgestellt werden. Gemäß den Brennexperimenten lassen sich die chemischen Reaktionen während des Brandprozesses nachvollziehen. Zwei Methoden wurden mittels Röntgendiffraktometrie (XRD) und Differential-Thermoanalyse (DTA) zur Bestimmung der Brenntemperaturen der Keramik modelliert. Die Töpferöfen der „Burggärten“ können nach der Brenntemperatur in zwei Typen zusammengefasst werden: solche mit einer Brenntemperatur unter 1050°C und solche mit einer Brenntemperatur über 1050°C.rn

Nucleation studies on graphics processing units

Ein System in einem metastabilen Zustand muss eine bestimmte Barriere in derrnfreien Energie überwinden um einen Tropfen der stabilen Phase zu formen.rnHerkömmliche Untersuchungen nehmen hierbei kugelförmige Tropfen an. Inrnanisotropen Systemen (wie z.B. Kristallen) ist diese Annahme aber nicht ange-rnbracht. Bei tiefen Temperaturen wirkt sich die Anisotropie des Systems starkrnauf die freie Energie ihrer Oberfläche aus. Diese Wirkung wird oberhalb derrnAufrauungstemperatur T R schwächer. Das Ising-Modell ist ein einfaches Mo-rndell, welches eine solche Anisotropie aufweist. Wir führen großangelegte Sim-rnulationen durch, um die Effekte, die mit einer endlichen Simulationsbox ein-rnhergehen, sowie statistische Ungenauigkeiten möglichst klein zu halten. DasrnAusmaß der Simulationen die benötigt werden um sinnvolle Ergebnisse zu pro-rnduzieren, erfordert die Entwicklung eines skalierbaren Simulationsprogrammsrnfür das Ising-Modell, welcher auf verschiedenen parallelen Architekturen (z.B.rnGrafikkarten) verwendet werden kann. Plattformunabhängigkeit wird durch ab-rnstrakte Schnittstellen erreicht, welche plattformspezifische Implementierungs-rndetails verstecken. Wir benutzen eine Systemgeometrie die es erlaubt eine Ober-rnfläche mit einem variablen Winkel zur Kristallebene zu untersuchen. Die Ober-rnfläche ist in Kontakt mit einer harten Wand, wobei der Kontaktwinkel Θ durchrnein Oberflächenfeld eingestellt werden kann. Wir leiten eine Differenzialglei-rnchung ab, welche das Verhalten der freien Energie der Oberfläche in einemrnanisotropen System beschreibt. Kombiniert mit thermodynamischer Integrationrnkann die Gleichung benutzt werden, um die anisotrope Oberflächenspannungrnüber einen großen Winkelbereich zu integrieren. Vergleiche mit früheren Mes-rnsungen in anderen Geometrien und anderen Methoden zeigen hohe Überein-rnstimung und Genauigkeit, welche vor allem durch die im Vergleich zu früherenrnMessungen wesentlich größeren Simulationsdomänen erreicht wird. Die Temper-rnaturabhängigkeit der Oberflächensteifheit κ wird oberhalb von T R durch diernKrümmung der freien Energie der Oberfläche für kleine Winkel gemessen. DiesernMessung lässt sich mit Simulationsergebnissen in der Literatur vergleichen undrnhat bessere Übereinstimmung mit theoretischen Voraussagen über das Skalen-rnverhalten von κ. Darüber hinaus entwickeln wir ein Tieftemperatur-Modell fürrndas Verhalten um Θ = 90 Grad weit unterhalb von T R. Der Winkel bleibt bis zu einemrnkritischen Feld H C quasi null; oberhalb des kritischen Feldes steigt der Winkelrnrapide an. H C wird mit der freien Energie einer Stufe in Verbindung gebracht,rnwas es ermöglicht, das kritische Verhalten dieser Größe zu analysieren. Die harternWand muss in die Analyse einbezogen werden. Durch den Vergleich freier En-rnergien bei geschickt gewählten Systemgrößen ist es möglich, den Beitrag derrnKontaktlinie zur freien Energie in Abhängigkeit von Θ zu messen. Diese Anal-rnyse wird bei verschiedenen Temperaturen durchgeführt. Im letzten Kapitel wirdrneine 2D Fluiddynamik Simulation für Grafikkarten parallelisiert, welche u. a.rnbenutzt werden kann um die Dynamik der Atmosphäre zu simulieren. Wir im-rnplementieren einen parallelen Evolution Galerkin Operator und erreichen

Neuropsychological long-term sequelae after posterior fossa tumour resection during childhood

The importance of the cerebellum for non‐motor functions is becoming more and more evident. The influence on cognitive functions from acquired cerebellar lesions during childhood, however, is not well known. We present follow‐up data from 24 patients, who were operated upon during childhood for benign cerebellar tumours. The benign histology of these tumours required neither radiotherapy nor chemotherapy. Post‐operatively, these children were of normal intelligence with a mean IQ of 99.1, performance intelligence quotient (PIQ) of 101.3 and verbal intelligence quotient (VIQ) of 96.8. However, 57% of patients showed abnormalities in subtesting. In addition, more extensive neuropsychological testing revealed significant problems for attention, memory, processing speed and interference. Visuo‐constructive problems were marked for copying the Rey figure, but less pronounced for recall of the figure. Verbal fluency was more affected than design fluency. Behavioural deficits could be detected in 33% of patients. Attention deficit problems were marked in 12.5%, whereas others demonstrated psychiatric symptoms such as mutism, addiction problems, anorexia, uncontrolled temper tantrums and phobia. Age at tumour operation and size of tumour had no influence on outcome. Vermis involvement was related to an increase in neuropsychological and psychiatric problems. The observation that patients with left‐sided cerebellar tumours were more affected than patients with right‐sided tumours is probably also influenced by a more pronounced vermian involvement in the former group. In summary, this study confirms the importance of the cerebellum for cognitive development and points to the necessity of careful follow‐up for these children to provide them with the necessary help to achieve full integration into professional life.

Mobilities and Pottery Production Archaeological and Anthropological Perspectives

Our workshop aims at a deeper understanding of various itineraries of pottery and dif-ferent forms of human mobilities in which pottery is relevant, bringing together archae-ological and anthropological perspectives. For thousands of years, pottery has been an important part of many societies’ material culture and therefore a major research topic in both disciplines. In past and present societies the material existence of ceramic vessels is informed by various movements across time and space but also by periods of stasis: from the mo-ment of their production until their exclusion from daily practices, either disposed as waste, excluded as funerary objects or stored as collectibles. In their seemingly endless material durability, ceramic vessels might outlive their human producers, distributors or consumers and travel farther and longer. Still they are embedded in the regimes of human mobility, ranging from daily subsistence-based mobility to long-term migrations. In such processes, pottery shifts between spatial, temporal, social, economic and cultural contexts. Thereby ceramic vessels are appropriated and integrated in new contexts of action and meaning, sometimes leading to material transformations. This workshop takes place in the context of our archaeological research project „Mobili-ties, Entanglements and Transformations in Neolithic Societies on the Swiss Plateau (3900-3500 BC)“ to which our PhDs are connected. We address the above outlined topic by analysing the production of pottery. Based on dendrochronologically dated settle-ments between 3900 and 3500 BC, two regional pottery styles and their local variations are well known, Pfyn and Cortaillod. The vessels share the same habitus and were made of clays and temper deriving from the settlements’ surroundings. However, some vessels specific to other pottery styles are also present on the sites. They are characteristic for pottery styles known from more or less far off regions (Michelsberg, Munzingen or Néo-lithique Moyen Bourguignon). Some of them were travelling objects, as their non local raw materials show. Others seem to have been produced locally, pointing to long-term mobility and a change of residence from neighbouring social groups.

RELATIONSHIP OF ANTISOCIAL PERSONALITY SYNDROME IN BOYS TO PARENTAL ALCOHOL/DRUG DEPENDENCY

The study focused on the relationship between antisocial personality syndrome in boys ages 8-15 and parental alcohol/drug dependency. The population studied was case records of 101 boys coming to a private psychiatrist from 1966 through 1979. The boys were predominantly white and from middle to upper income families.^ A boy was determined to have antisocial personality syndrome if he exhibited antisocial behaviors in four or five major categories, did not exhibit a brain syndrome, and did not exhibit a thought disorder. The five major behavior categories were: (1) self-control (i.e., temper tantrums or hyperactivity), (2) behavior at home (i.e., disobedience or lying), (3) behavior at school (i.e., truancy or cheating), (4) behavior toward peers (i.e., bullying, fighting, or tattling), and (5) behavior against property (i.e., destructiveness or stealing). A boy was determined to be a control if he exhibited antisocial behaviors in two or less behavior categories.^ A parent was determined to have alcohol/drug dependency if s/he exhibited a score above the established threshold (1) for the MacAndrew Alcoholism Scale (28 or above), and (2) for the Holmes Alcoholism Scale (35 or above) which are used with the MMPI. A parent was classified not alcohol/drug dependent if s/he had scores below set thresholds (22 on the MacAndrew Alcoholism Scale and 28 on the Holmes Alcoholism Scale).^ For the final sample (N = 10), there was no reason to believe a relationship exists between antisocial personality syndrome in boys ages 8-15 and parental alcohol/drug dependency (Fisher's Exact Test {FET} P = 1.0). The small sample size primarily occurred as a result of 88.12% of the parents being classified in a questionable category in terms of alcohol/drug dependency.^ The sample was suggestive of a relationship between the fathers' Psychopathic Deviate (Pd) Scale scores as a measure of antisocial tendencies and the boy having antisocial personality syndrome (N = 75; P = .12). There was no evidence of such a relationship for mothers (N = 75; P = .97). ^

A silviculture-oriented spatio-temporal model for germination in Pinus pinea L. in the Spanish Northern Plateau based on a direct seeding experiment

Natural regeneration in Pinus pinea stands commonly fails throughout the Spanish Northern Plateau under current intensive regeneration treatments. As a result, extensive direct seeding is commonly conducted to guarantee regeneration occurrence. In a period of rationalization of the resources devoted to forest management, this kind of techniques may become unaffordable. Given that the climatic and stand factors driving germination remain unknown, tools are required to understand the process and temper the use of direct seeding. In this study, the spatio-temporal pattern of germination of P. pinea was modelled with those purposes. The resulting findings will allow us to (1) determine the main ecological variables involved in germination in the species and (2) infer adequate silvicultural alternatives. The modelling approach focuses on covariates which are readily available to forest managers. A two-step nonlinear mixed model was fitted to predict germination occurrence and abundance in P. pinea under varying climatic, environmental and stand conditions, based on a germination data set covering a 5-year period. The results obtained reveal that the process is primarily driven by climate variables. Favourable conditions for germination commonly occur in fall although the optimum window is often narrow and may not occur at all in some years. At spatial level, it would appear that germination is facilitated by high stand densities, suggesting that current felling intensity should be reduced. In accordance with other studies on P. pinea dispersal, it seems that denser stands during the regeneration period will reduce the present dependence on direct seeding.

Metodología de rehabilitación energética de barrios y regeneración urbana: aplicación al barrio Almenara

El origen de la investigación se basa en la necesid ad de intervención a nivel ambiental, económico y social, en el barrio Almenara de Tetuán , Madrid. El objetivo principal de la investigación es la búsqueda de una metodología de rehabilitación energética de barrios y regeneración urbana. Los objetivos secundarios so n la aplicación de la metodología al barrio reduciendo las demandas energéticas de modo directo, mediante la mejora de los parámetros característicos de la envolvente, y de m odo indirecto, mediante la aplicación de materiales fríos en cubierta y fachada, la intro ducción de envolventes vegetales, que aumenten la evapotranspiración y reduzcan la temper atura ambiental y la modificación de la morfología de la cubierta, incorporando zonas de estancia. Todo ello, en busca de un espacio urbano global. La metodología de trabajo comenzó con la caracterización histórica y normativa del área por medio de la cons ulta de publicaciones del Ministerio y Gerencia de Urbanismo. Y la caracterización edifica toria del barrio por medio de los Archivos de Documentación histórica. Desde el punto de vista medioambiental, se ha realizado un análisis climático, a partir de la dir ección y velocidad de los vientos y la radiación solar recibida por las superficies estruc turantes de pavimentación y cubiertas, así como las fachadas en los solsticios y equinocci os. Todo ello, analizando la localización de las zonas verdes actuales y futuras y su influen cia. Se ha analizado la movilidad del transporte público, la influencia de los ciclistas y accesibilidad de personas con movilidad reducida. Se han obtenido las lesiones como parámet ros en términos de condicionamiento térmico, a nivel urbano y edificat orio y se ha realizado un trabajo a nivel termográfico de la edificación. El análisis s ocial y poblacional se ha obtenido mediante una encuesta de elaboración propia sobre e l estado actual de la edificación, las condiciones de confort de los inquilinos, y la obte nción de indicadores de Vulnerabilidad Urbana a través de la aplicación de cartografía din ámica online denominada “Atlas de Vulnerabilidad Urbana de España”. Finalmente, se ha aplicado todo lo anterior al barrio Almenara a nivel urbano y edificatorio, sobre una m anzana residencial tipo, y sobre una vivienda característica, desde el punto de vista me dioambiental, económico y social.

Estudo da influência do relacionamento entre a égua e o potro no comportamento social e no temperamento de potros da raça Mangalarga Marchador

O trabalho teve como objetivo compreender o relacionamento entre a égua e o potro e a influência deste sobre o comportamento social e temperamento do potro, a partir do décimo primeiro dia de vida até após o processo de desmama do potro. Oito díades de éguas e potros da raça Mangalarga Marchador provenientes de um criatório situado na cidade de Amparo/SP foram avaliadas durante três etapas distintas. A primeira foi realizada para caracterizar o comportamento social do grupo de equinos e o relacionamento entre égua e potro durante os três períodos de desenvolvimento do potro (dependência, socialização e independência). Nessa etapa foram registradas: as interações agonísticas das éguas; episódios de mamada dos potros (tentativas e mamadas) e para o par égua e potro foram anotados os comportamentos afiliativos e a relação espacial. Ao final dessa etapa os potros foram classificados em dependentes e independentes e as éguas foram divididas de acordo com sua hierarquia. A segunda etapa constitui-se da avaliação das atividades e relação espacial dos potros durante o processo de desmama, para a caracterização do estresse dos potros. Na terceira etapa a relação social dos potros foi observada na ausência de suas mães, através do registro das interações e da relação espacial dos potros. Durante as três etapas foram aplicados quatro testes de avaliação dos aspectos do temperamento dos animais: teste de reatividade durante o manejo de escovação para a avaliação da reatividade ao manejo; teste de arena para avaliar a emotividade ao isolamento; teste de reatividade perante humano desconhecido e ativo para avaliar a reatividade ao humano; e teste da presença de estímulo sonoro desconhecido para avaliação da emotividade ao estímulo desconhecido. A hierarquia e a experiência da mãe interferiam no cuidado materno de aleitamento (P<0,05), entretanto, não influenciaram o cuidado de proteção (P>0,05). A frequência de permanência dos potros com sua mãe na distância de até 1 metro diminuiu ao longo dos períodos (P<0,05). As éguas não modificaram a frequência dos comportamentos afiliativos com seus potros ao longo dos períodos (P>0,05). As maiores frequências de comportamentos afiliativos dos potros com suas mães foram durante os períodos iniciais do desenvolvimento do potro (dependência e socialização, P<0,05). Potros dependentes apresentaram maior frequência e menor duração das mamadas quando comparado à frequência e duração dos potros independentes (P<0,05). A reatividade ao manejo e a emotividade ao isolamento dos potros foram maiores nos períodos da dependência, da socialização e durante a desmama (P<0,05). A reatividade ao humano e emotividade ao desconhecido apresentaram a tendência de diminuir ao longo dos períodos observados (P<0,05). Os potros dependentes apresentaram maior emotividade ao desconhecido e ao isolamento (P<0,05), além de maior estresse durante a desmama, quando comparado aos potros independentes. Todos os potros normalizaram suas atividades no decorrer do processo da desmama. Na ausência das mães os potros independentes foram os que iniciaram a maioria das interações entre os animais (P<0,05). O relacionamento entre a égua e o potro foi modificado devido às características maternas de hierarquia e experiência, além do nível de independência do potro e do seu temperamento.

Consequences of the Past: China's Rise to Superpower Status and its Impact on the United States

This paper investigates the impact of how the Chinese government will react to the West if China regains its superpower status. Using traditional research methods, this paper traced the cultural misunderstandings that initiated the confrontation with the West and the resulting humiliation China suffered for nearly 175 years by the Western powers. The findings of this paper show that China bitterly resents the treatment suffered during the Colonial period. Although certain factions in China wish to punish the West, this paper argues that the interconnected nature of the world's economy will force China to temper its feelings and build bridges with the West as it attains superpower status.