Development of a modified flyash as a permeable reactive barrier media for a former manufactured gas plant site Northern Ireland

A sequential biological permeable reactive barrier (PRB) was determined to be the best option for remediating groundwater that has become contaminated with a wide range of organic contaminants (i.e., benzene, toluene, ethylbenzene, xylene and polyaromatic hydrocarbons), heavy metals (i.e., lead and arsenic), and cyanide at a former manufactured gas plant after 150 years of operation in Portadown, Northern Ireland. The objective of this study was to develop a modified flyash that could be used in the initial cell within a sequential biological PRB to filter complex contaminated groundwater containing ammonium. Flyash modified with lime (CaOH) and alum was subjected to a series of batch tests which investigated the modified cation exchange capacity (CEC) and rate of removal of anions and cations from the solution. These tests showed that a high flyash composition medium (80%) could remove 8.65 mol of ammonium contaminant for every kilogram of medium. The modified CEC procedure ruled out the possibility of cation exchange as the major removal mechanism. The medium could also adsorb anions as well as cations (i.e., Pb and Cr), but not with the same capacity. The initial mechanism for Pb and Cr removal is probably precipitation. This is followed by sorption, which is possibly the only mechanism for the removal of dichromate anions. Scanning electron microscopic analysis revealed very small (

Development of user-friendly, high throughput screening for ligands and inhibitors of carbohydrate modifying enzymes

This paper describes the impact of cloud computing and the use of GPUs on the performance of Autodock and Gromacs respectively. Cloud computing was applicable to reducing the ‘‘tail’’ seen in running Autodock on desktop grids and the GPU version of Gromacs showed significant improvement over the CPU version. A large (200,000 compounds) library of small molecules, seven sialic acid analogues of the putative substrate and 8000 sugar molecules were converted into pdbqt format and used to interrogate the Trichomonas vaginalis neuraminidase using Autodock Vina. Good binding energy was noted for some of the small molecules (~-9 kcal/mol), but the sugars bound with affinity of less than -7.6 kcal/mol. The screening of the sugar library resulted in a ‘‘top hit’’ with a-2,3-sialyllacto-N-fucopentaose III, a derivative of the sialyl Lewisx structure and a known substrate of the enzyme. Indeed in the top 100 hits 8 were related to this structure. A comparison of Autodock Vina and Autodock 4.2 was made for the high affinity small molecules and in some cases the results were superimposable whereas in others, the match was less good. The validation of this work will require extensive ‘‘wet lab’’ work to determine the utility of the workflow in the prediction of potential enzyme inhibitors.

Development of novel antibacterial active, HaCaT biocompatible and biodegradable CA-g-P(3HB)-EC biocomposites with caffeic acid as a functional entity

We have developed novel composites by grafting caffeic acid (CA) onto the P(3HB)-EC based material and laccase from Trametes versicolor was used for grafting purposes. The resulting composites were designated as CA-g-P(3HB)-EC i.e., P(3HB)-EC (control), 5CA-g-P(3HB)-EC, 10CA-g-P(3HB)-EC, 15CA-g-P(3HB)-EC and 20CA-g-P(3HB)-EC. An FT-IR (Fourier-transform infrared spectroscopy) was used to examine the functional and elemental groups of the control and laccase-assisted graft composites. Evidently, 15CA-g-P(3HB)-EC composite exhibited resilient antibacterial activity against Gram-positive and Gram-negative bacterial strains, respectively. Moreover, a significant level of biocompatibility and biodegradability of the CA-g-P(3HB)-EC composites was also achieved with the human keratinocytes-like HaCaT cells and soil burial evaluation, respectively. In conclusion, the newly developed novel composites with multi characteristics could well represent the new wave of biomaterials for medical applications, and more specifically have promising future in the infection free would dressings, burn and/or skin regeneration field due to their sophisticated characteristics.

Development of broad-spectrum human monoclonal antibodies for rabies post-exposure prophylaxis

Currently available rabies post-exposure prophylaxis (PEP) for use in humans includes equine or human rabies immunoglobulins (RIG). The replacement of RIG with an equally or more potent and safer product is strongly encouraged due to the high costs and limited availability of existing RIG. In this study, we identified two broadly neutralizing human monoclonal antibodies that represent a valid and affordable alternative to RIG in rabies PEP. Memory B cells from four selected vaccinated donors were immortalized and monoclonal antibodies were tested for neutralizing activity and epitope specificity. Two antibodies, identified as RVC20 and RVC58 (binding to antigenic site I and III, respectively), were selected for their potency and broad-spectrum reactivity. In vitro, RVC20 and RVC58 were able to neutralize all 35 rabies virus (RABV) and 25 non-RABV lyssaviruses. They showed higher potency and breath compared to antibodies under clinical development (namely CR57, CR4098, and RAB1) and commercially available human RIG. In vivo, the RVC20–RVC58 cocktail protected Syrian hamsters from a lethal RABV challenge and did not affect the endogenous hamster post-vaccination antibody response.

The Development, Validation and Implementation of a Broad-Based ADME Genotyping Assay into Research and Clinical Trials

Afin d’adresser la variabilité interindividuelle observée dans la réponse pharmacocinétique à de nombreux médicaments, nous avons créé un panel de génotypage personnalisée en utilisant des méthodes de conception et d’élaboration d’essais uniques. Celles-ci ont pour but premier de capturer les variations génétiques présentent dans les gènes clés impliqués dans les processus d'absorption, de distribution, de métabolisme et d’excrétion (ADME) de nombreux agents thérapeutiques. Bien que ces gènes et voies de signalement sont impliqués dans plusieurs mécanismes pharmacocinétiques qui sont bien connues, il y a eu jusqu’à présent peu d'efforts envers l’évaluation simultanée d’un grand nombre de ces gènes moyennant un seul outil expérimental. La recherche pharmacogénomique peut être réalisée en utilisant deux approches: 1) les marqueurs fonctionnels peuvent être utilisés pour présélectionner ou stratifier les populations de patients en se basant sur des états métaboliques connus; 2) les marqueurs Tag peuvent être utilisés pour découvrir de nouvelles corrélations génotype-phénotype. Présentement, il existe un besoin pour un outil de recherche qui englobe un grand nombre de gènes ADME et variantes et dont le contenu est applicable à ces deux modèles d'étude. Dans le cadre de cette thèse, nous avons développé un panel d’essais de génotypage de 3,000 marqueurs génétiques ADME qui peuvent satisfaire ce besoin. Dans le cadre de ce projet, les gènes et marqueurs associés avec la famille ADME ont été sélectionnés en collaboration avec plusieurs groupes du milieu universitaire et de l'industrie pharmaceutique. Pendant trois phases de développement de cet essai de génotypage, le taux de conversion pour 3,000 marqueurs a été amélioré de 83% à 97,4% grâce à l'incorporation de nouvelles stratégies ayant pour but de surmonter les zones d'interférence génomiques comprenant entre autres les régions homologues et les polymorphismes sous-jacent les régions d’intérêt. La précision du panel de génotypage a été validée par l’évaluation de plus de 200 échantillons pour lesquelles les génotypes sont connus pour lesquels nous avons obtenu une concordance > 98%. De plus, une comparaison croisée entre nos données provenant de cet essai et des données obtenues par différentes plateformes technologiques déjà disponibles sur le marché a révélé une concordance globale de > 99,5%. L'efficacité de notre stratégie de conception ont été démontrées par l'utilisation réussie de cet essai dans le cadre de plusieurs projets de recherche où plus de 1,000 échantillons ont été testés. Nous avons entre autre évalué avec succès 150 échantillons hépatiques qui ont été largement caractérisés pour plusieurs phénotypes. Dans ces échantillons, nous avons pu valider 13 gènes ADME avec cis-eQTL précédemment rapportés et de découvrir et de 13 autres gènes ADME avec cis eQTLs qui n'avaient pas été observés en utilisant des méthodes standard. Enfin, à l'appui de ce travail, un outil logiciel a été développé, Opitimus Primer, pour aider pour aider au développement du test. Le logiciel a également été utilisé pour aider à l'enrichissement de cibles génomiques pour d'expériences séquençage. Le contenu ainsi que la conception, l’optimisation et la validation de notre panel le distingue largement de l’ensemble des essais commerciaux couramment disponibles sur le marché qui comprennent soit des marqueurs fonctionnels pour seulement un petit nombre de gènes, ou alors n’offre pas une couverture adéquate pour les gènes connus d’ADME. Nous pouvons ainsi conclure que l’essai que nous avons développé est et continuera certainement d’être un outil d’une grande utilité pour les futures études et essais cliniques dans le domaine de la pharmacocinétique, qui bénéficieraient de l'évaluation d'une longue liste complète de gènes d’ADME.

Development of novel surface coatings based on acrylic copolymers

The present study describes the preparation of Vinyl acetate-Butyl acrylate copolymer lattices of varying compositions and solid contents by semicontinuous emulsion polymerization method. This copolymer lattices were used as binder to develop a new surface coating formulation. The properties of this surface coating were improved by using nano TiO2 colloidal sol as a pigment. Antimicrobial activity of surface coatings was improved by the addition of carboxymethyl chitosan as biocide. Uniformly dispersed tyre crumb was used to give a mat finish to the coating. The mechanical properties adhesive properties, thermal properties etc. of the coatings are presented in thesis.

Development of Polymer Cement Composites

Research in the field of polymer modified cement has been carried out for the last 70 years or more. Polymers are mostly used to enhance durability and sustainability of cement concrete and in combination with classical construction materials a synergistic effect is obtained. In this work different polymers were added to Portland cement in various proportions and the mechanical and chemical resistance properties of the resultant composites when exposed to chemical environments were studied. Microstructural studies were also carried out to investigate the morphology of the composite and analyse the nature of interactions taking place between the cement and polymer phases. Though most polymers did not improve the compressive strength of the cement paste, it was found that they enhanced the resistance of the virgin cement paste to external chemical environments. The polymers seal the pores in the cement matrix and bridge the microcracks within the composite. Some of the polymers underwent chemical interactions with the cement paste thereby interfering in the hydration of cement. Polymers also decreased the leachability of water soluble components of virgin cement resulting in composites having improved durability. An attempt to correlate the structure of the polymers with the properties of the resultant composites is also presented.

Socio-Economic Dimensions of Health Care Development Among Tribals in Kerala: A Study of Tribal Communities in Wynad

The contemporary explanations and discussions of the relationship between medicine and health, and society centre around assumptions that can be broadly classified into three setsl. The first set considers health and illness as predominantly ‘biological’ and therefore, having nothing to do with the social and economic environment in which it occurs. The struggle to combat illness therefore, lies entirely within the purview of modern medicine which is neutral to economic or social change. The second considers practice of medicine as a natural science. It allows the doctor to separate himself from his subject matter, the patient, in the samelway as the natural scientist is assumed to separate himself from his subject matter, the natural world. As a 'science' and with the scientific method, it can produce unchallengable and autonomous body of knowledge which is free from the wider social and economic context. The third, different from the above, recognises the relationship between health, medicine and society. Social and environmental aspects as determinants of illness or of health comes to sharp focus here and it assigns to medicine the status of a mediator, the only viable mediator, between people and diseases. In this scheme of things the usefulness of medicine is unquestionable but the problem lies in not having enough of it to go arounds.

Development of hybrid UV VCSEL with organic active material and dielectric DBR mirrors for medical, sensoric and data storage applications

Lasers play an important role for medical, sensoric and data storage devices. This thesis is focused on design, technology development, fabrication and characterization of hybrid ultraviolet Vertical-Cavity Surface-Emitting Lasers (UV VCSEL) with organic laser-active material and inorganic distributed Bragg reflectors (DBR). Multilayer structures with different layer thicknesses, refractive indices and absorption coefficients of the inorganic materials were studied using theoretical model calculations. During the simulations the structure parameters such as materials and thicknesses have been varied. This procedure was repeated several times during the design optimization process including also the feedback from technology and characterization. Two types of VCSEL devices were investigated. The first is an index coupled structure consisting of bottom and top DBR dielectric mirrors. In the space in between them is the cavity, which includes active region and defines the spectral gain profile. In this configuration the maximum electrical field is concentrated in the cavity and can destroy the chemical structure of the active material. The second type of laser is a so called complex coupled VCSEL. In this structure the active material is placed not only in the cavity but also in parts of the DBR structure. The simulations show that such a distribution of the active material reduces the required pumping power for reaching lasing threshold. High efficiency is achieved by substituting the dielectric material with high refractive index for the periods closer to the cavity. The inorganic materials for the DBR mirrors have been deposited by Plasma- Enhanced Chemical Vapor Deposition (PECVD) and Dual Ion Beam Sputtering (DIBS) machines. Extended optimizations of the technological processes have been performed. All the processes are carried out in a clean room Class 1 and Class 10000. The optical properties and the thicknesses of the layers are measured in-situ by spectroscopic ellipsometry and spectroscopic reflectometry. The surface roughness is analyzed by atomic force microscopy (AFM) and images of the devices are taken with scanning electron microscope (SEM). The silicon dioxide (SiO2) and silicon nitride (Si3N4) layers deposited by the PECVD machine show defects of the material structure and have higher absorption in the ultra violet range compared to ion beam deposition (IBD). This results in low reflectivity of the DBR mirrors and also reduces the optical properties of the VCSEL devices. However PECVD has the advantage that the stress in the layers can be tuned and compensated, in contrast to IBD at the moment. A sputtering machine Ionsys 1000 produced by Roth&Rau company, is used for the deposition of silicon dioxide (SiO2), silicon nitride (Si3N4), aluminum oxide (Al2O3) and zirconium dioxide (ZrO2). The chamber is equipped with main (sputter) and assisted ion sources. The dielectric materials were optimized by introducing additional oxygen and nitrogen into the chamber. DBR mirrors with different material combinations were deposited. The measured optical properties of the fabricated multilayer structures show an excellent agreement with the results of theoretical model calculations. The layers deposited by puttering show high compressive stress. As an active region a novel organic material with spiro-linked molecules is used. Two different materials have been evaporated by utilizing a dye evaporation machine in the clean room of the department Makromolekulare Chemie und Molekulare Materialien (mmCmm). The Spiro-Octopus-1 organic material has a maximum emission at the wavelength λemission = 395 nm and the Spiro-Pphenal has a maximum emission at the wavelength λemission = 418 nm. Both of them have high refractive index and can be combined with low refractive index materials like silicon dioxide (SiO2). The sputtering method shows excellent optical quality of the deposited materials and high reflection of the multilayer structures. The bottom DBR mirrors for all VCSEL devices were deposited by the DIBS machine, whereas the top DBR mirror deposited either by PECVD or by combination of PECVD and DIBS. The fabricated VCSEL structures were optically pumped by nitrogen laser at wavelength λpumping = 337 nm. The emission was measured by spectrometer. A radiation of the VCSEL structure at wavelength 392 nm and 420 nm is observed.

The Wrong Kind of Lean: Over-Commitment and Under-Represented Skills on Technology Teams

This paper reports on results from five companies in the aerospace and automotive industries to show that over-commitment of technical professionals and under-representation of key skills on technology development and transition teams seriously impairs team performance. The research finds that 40 percent of the projects studied were inadequately staffed, resulting in weaker team communications and alignment. Most importantly, the weak staffing on these teams is found to be associated with a doubling of project failure rate to reach full production. Those weakly staffed teams that did successfully insert technology into production systems were also much more likely than other teams to have development delays and late engineering changes. The conclusion suggests that the expense of project failure, delay and late engineering changes in these companies must greatly out-weigh the savings gained from reduced staffing costs, and that this problem is likely going to be found in other technology-intensive firms intent on seeing project budgets as a cost to be minimized rather than an investment to be maximized.

An examination of actors that impact technology introduction to FM

Developing and implementing a technology for Facilities Management (FM) can be a complex process. This is particularly the case when a technology impacts on an organisation as a whole. There are often a number of relevant actors, internal and external to FM, who should be engaged. This engagement is guided by the strategy of the organisation which is led by top management decisions. Indeed, it is top management who have the final decision to implement a technology. Actors of top management and other relevant actors will have their own discourses toward the implementation of the technology based on how they foresee the technology befittingly benefitting the organisation. This paper examines actors who play a relevant and necessary part in supporting and implementing a technology to FM. It examines how an actor’s discourse toward the project inhibits or speeds up the implementation of a technology. The methods used for this paper are based on a two year case study in a FM department where a technology development was observed and interviews with key participants were conducted. Critical discourse analysis is used to analyse the data. Prominent discourses that emerge from the data are emphasised during the process of introducing the technology. This research moves beyond focusing purely on project successes but examines the difficulties and the hurdles that must be overcome to reach a successful technology implementation.

Development of films based on blends of gelatin and poly(vinyl alcohol) cross linked with glutaraldehyde

Both gelatin and poly(vinyl alcohol) (PVA) can be cross linked with glutaraldehyde (GLU). In the case of gelatin, the GLU reacts with each e-NH2 functional group of adjacent lysine residues, while for PVA, the GLU reacts with two adjacent hydroxyl groups, forming acetal bridges. Thus it can be considered possible to cross link adjacent macromolecules of gelatin and PVA using GLU. In this context, the aims of this work were the development of biodegradable films based on blends of gelatin and poly(vinyl alcohol) cross linked with GLU, and the characterization of some of their main physical and functional properties. All the films were produced from film-forming solutions (FFS) containing 2 g macromolecules (PVA + gelatin)/100 g FFS, 25 g glycerol/100 g macromolecules, and 4 g GLU (25% solution)/100 g FFS. The FFS were prepared with two concentrations of PVA (20 or 50 g PVA/100 g macromolecules) and two reaction temperatures: 90 or 55 degrees C, applied for 30 min. The films were obtained after drying (30 degrees C/24 h) and conditioning at 25 degrees C and 58% of relative humidity for 7 days, and were then characterized. The results for the color parameters, mechanical properties, phase transitions and infrared spectra showed that some chemical modifications occurred, principally for the gelatin. However, in general, all the characteristics of the films were either typical of films based on blends of these macromolecules without cross linking, or slightly higher. A greater improvement in the properties of this material was probably not observed due to the crystallinity of the PVA, which has a melting point above 90 degrees C. The presence of microcrystals in the polymer chain probably reduced macromolecular mobility, hindering the reaction. Thus more research is necessary to produce biodegradable films with improved properties. (C) 2011 Elsevier Ltd. All rights reserved.

Development of edible films based on differently processed Atlantic halibut (Hippoglossus hippoglossus) skin gelatin

The gelatin prepared from the skins of the Atlantic halibut (Hippoglossus hippoglossus) was investigated for the development of edible films plasticized with 30g sorbitol/100g gelatin. Two types of dry gelatin preparations were obtained depending on whether an intermediate evaporation step at 60 degrees C in the drying procedure is included or not. The amino acid composition, molecular weight distribution (determined by SDS-polyacrylamide gel electrophoresis) and glass transition temperature (determined by differential scanning calorimetry) of the gelatins were determined and related to some physical properties of the resulting films. The gelatin extracted from the halibut skins showed a suitable filmogenic capacity, leading to transparent, weakly colored, water-soluble and highly extensible films. The intermediate evaporation step at 60 degrees C induced thermal protein degradation, causing the resulting films to be significantly less resistant and more extensible. No differences in water vapor permeability, viscoelasticity, glass transition or color properties were evidenced between the two gelatins tested. (C) 2007 Elsevier Ltd. All rights reserved.

Exploring nurses' reactions to a novel technology to support acute health care delivery

AIMS AND OBJECTIVES: To explore nurses' reactions to new novel technology for acute health care. BACKGROUND: Past failures of technology developers to deliver products that meet nurses' needs have led to resistance and reluctance in the technology adoption process. Thus, involving nurses in a collaborative process from early conceptualisation serves to inform design reflective upon current clinical practice, facilitating the cementing of 'vision' and expectations of the technology. DESIGN: An exploratory descriptive design to capture nurses' immediate impressions. METHODS: Four focus groups (52 nurses from medical and surgical wards at two hospitals in Australia; one private and one public). RESULTS: Nursing reactions towards the new technology illustrated a variance in barrier and enabler comments across multiple domains of the Theoretical Domains Framework. Most challenging for nurses were the perceived threat to their clinical skill, and the potential capability of the novel technology to capture their clinical workflow. Enabling reactions included visions that this could help integrate care between departments; help management and support of nursing processes; and coordinating their patients care between clinicians. Nurses' reactions differed across hospital sites, influenced by their experiences of using technology. For example, Site 1 nurses reported wide variability in their distribution of barrier and enabling comments and nurses at Site 2, where technology was prevalent, reported mostly positive responses. CONCLUSION: This early involvement offered nursing input and facilitated understanding of the potential capabilities of novel technology to support nursing work, particularly the characteristics seen as potentially beneficial (enabling technology) and those conflicting (barrier technology) with the delivery of both safe and effective patient care. RELEVANCE TO CLINICAL PRACTICE: Collaborative involvement of nurses from the early conceptualisation of technology development brings benefits that increase the likelihood of successful use of a tool intended to support the delivery of safe and efficient patient care.