Influence of different systems of minimum ventilation on air quality in broiler houses

To maintain a competitive development of the Brazilian aviculture, some measures must be taken to enable the identification and reduction of risks to the health of birds, as well as for the physical environment. Therefore, the aim of this study was to evaluate the effectiveness of three different systems of minimum ventilation (positive pressure - SVMP, negative pressure - SVMN and natural ventilation - SVMNat) in the air quality during the first 21 days of life of broiler chicks, during winter. Three points were selected along the length to verify ammonia, carbon monoxide and oxygen concentrations at 3a.m., 9a.m., 3p.m. and 9p.m., by the respiration level of birds and workers. The averages of pollutant gases did not exceed the tolerance levels for the three minimum ventilation systems evaluated, which is 20 and 10ppm for the birds level and 20 and 39ppm for the workers level, for ammonia and carbon monoxide, respectively. It was evident that the minimum ventilation systems were appropriately sized for the required minimum ambient air renovation, in respect to ventilation rates applied for the SVMN and SVMP systems, and with air velocity at levels that do not stress the chicks, including for the SVMNat. The three studied systems of minimum ventilation allowed the birds to externalize their productive performance, with values close to the ones considered satisfactory for all evaluated parameters, in accordance with the Brazilian aviculture standards.

Geological map of Europe exhibiting the different systems of rocks according to the most recent researches and inedited materials by Roderick I. Murchison and James Nicol ; constructed by A. Keith Johnston

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Failure modes of passive decay heat removing safety systems of modern nuclear power plants

The purpose of this master’s thesis is to gain an understanding of passive safety systems’ role in modern nuclear reactors projects and to research the failure modes of passive decay heat removal safety systems which use phenomenon of natural circulation. Another purpose is to identify the main physical principles and phenomena which are used to establish passive safety tools in nuclear power plants. The work describes passive decay heat removal systems used in AES-2006 project and focuses on the behavior of SPOT PG system. The descriptions of the main large-scale research facilities of the passive safety systems of the AES-2006 power plant are also included. The work contains the calculations of the SPOT PG system, which was modeled with thermal-hydraulic system code TRACE. The dimensions of the calculation model are set according to the dimensions of the real SPOT PG system. In these calculations three parameters are investigated as a function of decay heat power: the pressure of the system, the natural circulation mass flow rate around the closed loop, and the level of liquid in the downcomer. The purpose of the calculations is to test the ability of the SPOT PG system to remove the decay heat from the primary side of the nuclear reactor in case of failure of one, two, or three loops out of four. The calculations show that three loops of the SPOT PG system have adequate capacity to provide the necessary level of safety. In conclusion, the work supports the view that passive systems could be widely spread in modern nuclear projects.

Report by Jacob Misner on setting contracts for deepening and clearing ditches and estimates of quantities and costs of marsh drainage

Report by Jacob Misner on setting contracts for deepening and clearing ditches and estimates of quantities and costs of marsh drainage (3 ½ pages, handwritten). This is marked as a copy, July 14, 1855.

On some systems of aesthetic categories

UANL

Sulphur Chemistry in Mangrove Systems of Tropical Cochin Estuary

Sulphur is a non conservative major element and is the most active species in the redox processes in nature, especially in aquatic environment . The varying oxidative states from-2 to +6 make it possible to enter into many of the biogeochemical processes. Thus the history, present and future of the chemical composition and behaviour of the natural aquatic systems and sediments have footprints of the sulphur chemistry.Mangroves are considered to be the most productive, fishery supportive ecosystem operating in the intertidal regions. The interlinking of the mangroves with the sulphur chemistry is attempted here.

Spatial Variability and Contamination of Heavy Metals in the Inter-tidal Systems of a Tropical Environment

Heavy metals in the surface sediments of the two coastal ecosystems of Cochin, southwest India were assessed. The study intends to evaluate the degree of anthropogenic influence on heavy metal concentration in the sediments of the mangrove and adjacent estuarine stations using enrichment factor and geoaccumulation index. The inverse relationship of Cd and Zn with texture in the mangrove sediments suggested the anthropogenic enrichment of these metals in the mangrove systems. In the estuarine sediments, the absence of any significant correlation of the heavy metals with other sedimentary parameters and their strong interdependence revealed the possibility that the input is not through the natural weathering processes. The analysis of enrichment factor indicated a minor enrichment for Pb and Zn in mangrove sediments. While, extremely severe enrichment for Cd, moderate enrichment for Zn and minor enrichment of Pb were observed in estuarine system. The geo accumulation index exhibited very low values for all metals except Zn, indicating the sediments of the mangrove ecosystem are unpolluted to moderately polluted by anthropogenic activities. However, very strongly polluted condition for Cd and a moderately polluted condition for Zn were evident in estuarine sediments

Hydrogeology and hydrochemistry of the aquifer systems of Kuttanad area, Kerala: Their role in understanding the evolution of groundwaters

This is an attempt to understand the important factors that control the occurrence, development and hydrochemical evolution of groundwater resources in sedimentary multi aquifer systems. The primary objective of this work is an integrated study of the hydrogeology and hydrochemistry with a view to elucidate the hydrochemical evolution of groundwater resources in the aquifer systems. The study is taken up in a typical coastal sedimentary aquifer system evolved under fluvio-marine environment in the coastal area of Kerala, known as the Kuttanad. The present study has been carried out to understand the aquifer systems, their inter relationships and evolution in the Kuttanad area of Kerala. The multi aquifer systems in the Kuttanad basin were formed from the sediments deposited under fluvio-marine and fluvial depositional environments and the marine transgressions and regressions in the geological past and palaeo climatic conditions influenced the hydrochemical environment in these aquifers. The evolution of groundwater and the hydrochemical processes involved in the formation of the present day water quality are elucidated from hydrochemical studies and the information derived from the aquifer geometry and hydraulic properties. Kuttanad area comprises of three types of aquifer systems namely phreatic aquifer underlain by Recent confined aquifer followed by Tertiary confined aquifers. These systems were formed by the deposition of sediments under fluvio-marine and fluvial environment. The study of the hydrochemical and hydraulic properties of the three aquifer systems proved that these three systems are separate entities. The phreatic aquifers in the area have low hydraulic gradients and high rejected recharge. The Recent confined aquifer has very poor hydraulic characteristics and recharge to this aquifer is very low. The Tertiary aquifer system is the most potential fresh water aquifer system in the area and the groundwater flow in the aquifer is converging towards the central part of the study area (Alleppey town) due to large scale pumping of water for water supply from this aquifer system. Mixing of waters and anthropogenic interferences are the dominant processes modifying the hydrochemistry in phreatic aquifers. Whereas, leaching of salts and cation exchange are the dominant processes modifying the hydrochemistry of groundwater in the confined aquifer system of Recent alluvium. Two significant chemical reactions modifying the hydrochemistry in the Recent aquifers are oxidation of iron in ferruginous clays which contributes hydrogen ions and the decomposition of organic matter in the aquifer system which consumes hydrogen ions. The hydrochemical environment is entirely different in the Tertiary aquifers as the groundwater in this aquifer system are palaeo waters evolved during various marine transgressions and regressions and these waters are being modified by processes of leaching of salts, cation exchange and chemical reactions under strong reducing environment. It is proved that the salinity observed in the groundwaters of Tertiary aquifers are not due to seawater mixing or intrusion, but due to dissolution of salts from the clay formations and ion exchange processes. Fluoride contamination in this aquifer system lacks a regional pattern and is more or less site specific in natureThe lowering of piezometric heads in the Tertiary aquifer system has developed as consequence of large scale pumping over a long period. Hence, puping from this aquifer system is to be regulated as a groundwater management strategy. Pumping from the Tertiary aquifers with high capacity pumps leads to well failures and mixing of saline water from the brackish zones. Such mixing zones are noticed from the hydrochemical studies. This is the major aquifer contamination in the Tertiary aquifer system which requires immediate attention. Usage of pumps above 10 HP capacities in wells taping Tertiary aquifers should be discouraged for sustainable development of these aquifers. The recharge areas need to be identified precisely for recharging the aquifer systems throughartificial means.

Investigations on the structural and operational changes of Ring Seine Fishing Systems of Kerala and its Life Cycle Assessment (lCA)

The study covers theFishing capture technology innovation includes the catching of aquatic animal, using any kind of gear techniques, operated from a vessel. Utilization of fishing techniques varies, depending upon the type of fisheries, and can go from a basic and little hook connected to a line to huge and complex mid water trawls or seines operated by large fishing vessels.The size and autonomy of a fishing vessel is largely determined by its ability to handle, process and store fish in good condition on board, and thus these two characteristics have been greatly influenced by the introduction and utilization of ice and refrigeration machinery. Other technological developments especially hydraulic hauling machinery, fish finding electronics and synthetic twines have also had a major impact on the efficiency and profitability of fishing vessels.A wide variety of fishing gears and practices ranging from small-scale artisanal to advanced mechanised systems are used for fish capture in Kerala. Most important among these fishing gears are trawls, seines, lines, gillnets and entangling nets and traps The modern sector was introduced in 1953 at Neendakara, Shakthikulangara region under the initiative of Indo-Norwegian project (INP). The novel facilities introduced in fishing industry by Indo- Norwegian project accordingly are mechanically operated new boats with new fishing nets. Soon after mechanization, motorization programme gained momentum in Kerala especially in Alleppey, Ernakulam and Kollam districts.

CD-Systems of Restarting Automata

Die vorliegende Arbeit behandelt Restartautomaten und Erweiterungen von Restartautomaten. Restartautomaten sind ein Werkzeug zum Erkennen formaler Sprachen. Sie sind motiviert durch die linguistische Methode der Analyse durch Reduktion und wurden 1995 von Jancar, Mráz, Plátek und Vogel eingeführt. Restartautomaten bestehen aus einer endlichen Kontrolle, einem Lese/Schreibfenster fester Größe und einem flexiblen Band. Anfänglich enthält dieses sowohl die Eingabe als auch Bandbegrenzungssymbole. Die Berechnung eines Restartautomaten läuft in so genannten Zyklen ab. Diese beginnen am linken Rand im Startzustand, in ihnen wird eine lokale Ersetzung auf dem Band durchgeführt und sie enden mit einem Neustart, bei dem das Lese/Schreibfenster wieder an den linken Rand bewegt wird und der Startzustand wieder eingenommen wird. Die vorliegende Arbeit beschäftigt sich hauptsächlich mit zwei Erweiterungen der Restartautomaten: CD-Systeme von Restartautomaten und nichtvergessende Restartautomaten. Nichtvergessende Restartautomaten können einen Zyklus in einem beliebigen Zustand beenden und CD-Systeme von Restartautomaten bestehen aus einer Menge von Restartautomaten, die zusammen die Eingabe verarbeiten. Dabei wird ihre Zusammenarbeit durch einen Operationsmodus, ähnlich wie bei CD-Grammatik Systemen, geregelt. Für beide Erweiterungen zeigt sich, dass die deterministischen Modelle mächtiger sind als deterministische Standardrestartautomaten. Es wird gezeigt, dass CD-Systeme von Restartautomaten in vielen Fällen durch nichtvergessende Restartautomaten simuliert werden können und andererseits lassen sich auch nichtvergessende Restartautomaten durch CD-Systeme von Restartautomaten simulieren. Des Weiteren werden Restartautomaten und nichtvergessende Restartautomaten untersucht, die nichtdeterministisch sind, aber keine Fehler machen. Es zeigt sich, dass diese Automaten durch deterministische (nichtvergessende) Restartautomaten simuliert werden können, wenn sie direkt nach der Ersetzung einen neuen Zyklus beginnen, oder ihr Fenster nach links und rechts bewegen können. Außerdem gilt, dass alle (nichtvergessenden) Restartautomaten, die zwar Fehler machen dürfen, diese aber nach endlich vielen Zyklen erkennen, durch (nichtvergessende) Restartautomaten simuliert werden können, die keine Fehler machen. Ein weiteres wichtiges Resultat besagt, dass die deterministischen monotonen nichtvergessenden Restartautomaten mit Hilfssymbolen, die direkt nach dem Ersetzungsschritt den Zyklus beenden, genau die deterministischen kontextfreien Sprachen erkennen, wohingegen die deterministischen monotonen nichtvergessenden Restartautomaten mit Hilfssymbolen ohne diese Einschränkung echt mehr, nämlich die links-rechts regulären Sprachen, erkennen. Damit werden zum ersten Mal Restartautomaten mit Hilfssymbolen, die direkt nach dem Ersetzungsschritt ihren Zyklus beenden, von Restartautomaten desselben Typs ohne diese Einschränkung getrennt. Besonders erwähnenswert ist hierbei, dass beide Automatentypen wohlbekannte Sprachklassen beschreiben.

Lower Bounds for Nonforgetting Restarting Automata and CD-Systems of Restarting Automata

The nonforgetting restarting automaton is a generalization of the restarting automaton that, when executing a restart operation, changes its internal state based on the current state and the actual contents of its read/write window instead of resetting it to the initial state. Another generalization of the restarting automaton is the cooperating distributed system (CD-system) of restarting automata. Here a finite system of restarting automata works together in analyzing a given sentence, where they interact based on a given mode of operation. As it turned out, CD-systems of restarting automata of some type X working in mode =1 are just as expressive as nonforgetting restarting automata of the same type X. Further, various types of determinism have been introduced for CD-systems of restarting automata called strict determinism, global determinism, and local determinism, and it has been shown that globally deterministic CD-systems working in mode =1 correspond to deterministic nonforgetting restarting automata. Here we derive some lower bound results for some types of nonforgetting restarting automata and for some types of CD-systems of restarting automata. In this way we establish separations between the corresponding language classes, thus providing detailed technical proofs for some of the separation results announced in the literature.

CD-Systems of Restarting Automata Governed by Explicit Enable and Disable Conditions

We introduce a new mode of operation for CD-systems of restarting automata by providing explicit enable and disable conditions in the form of regular constraints. We show that, for each CD-system M of restarting automata and each mode m of operation considered by Messerschmidt and Otto, there exists a CD-system M' of restarting automata of the same type as M that, working in the new mode ed, accepts the language that M accepts in mode m. Further, we prove that in mode ed, a locally deterministic CD-system of restarting automata of type RR(W)(W) can be simulated by a locally deterministic CD-system of restarting automata of the more restricted type R(W)(W). This is the first time that a non-monotone type of R-automaton without auxiliary symbols is shown to be as expressive as the corresponding type of RR-automaton.

On CD-systems of stateless deterministic R-automata with window size one

We study cooperating distributed systems (CD-systems) of restarting automata that are very restricted: they are deterministic, they cannot rewrite, but only delete symbols, they restart immediately after performing a delete operation, they are stateless, and they have a read/write window of size 1 only, that is, these are stateless deterministic R(1)-automata. We study the expressive power of these systems by relating the class of languages that they accept by mode =1 computations to other well-studied language classes, showing in particular that this class only contains semi-linear languages, and that it includes all rational trace languages. In addition, we investigate the closure and non-closure properties of this class of languages and some of its algorithmic properties.

CD-Systems of Stateless Deterministic R(1)-Automata Governed by an External Pushdown Store

We study cooperating distributed systems (CD-systems) of stateless deterministic restarting automata with window size 1 that are governed by an external pushdown store. In this way we obtain an automata-theoretical characterization for the class of context-free trace languages.

On Globally Deterministic CD-Systems of Stateless R-Automata with Window Size One

It is known that cooperating distributed systems (CD-systems) of stateless deterministic restarting automata with window size 1 accept a class of semi-linear languages that properly includes all rational trace languages. Although the component automata of such a CD-system are all deterministic, in general the CD-system itself is not, as in each of its computations, the initial component and the successor components are still chosen nondeterministically. Here we study CD-systems of stateless deterministic restarting automata with window size 1 that are themselves completely deterministic. In fact, we consider two such types of CD-systems, the strictly deterministic systems and the globally deterministic systems.