Influencia de las condiciones de procesado mediante FDM sobre las propiedades físicas y mecánicas del plástico ABS

El propósito del presente proyecto fue seleccionar la configuración de fabricación de probetas obtenidas mediante el proceso de Modelado por Deposición Fundida (FDM) con el termoplástico acrilonitrilo butadieno estireno (ABS), que optimice las propiedades mecánicas de las probetas y el ahorro de material de apoyo. Se aplicaron técnicas de caracterización física y mecánica y de microscopia electrónica de barrido (SEM). Los resultados indicaron que las probetas verticales presentaron aproximadamente el 6 % de pérdida de material frente cerca de un 40% de las probetas horizontales. La rotura de los cordones se produjo longitudinalmente en el borde de las probetas horizontales mientras que en el borde de las probetas verticales fueron por despegue de los cordones de ABS. La rotura de los cordones en el interior de ambas probetas fue en la dirección de los cordones. ABSTRACT The purpose of this project was to select the manufacture design in test specimens obtained using Fused Deposition Modeling (FDM) with Acrylonitrile Butadiene Styrene (ABS), thus optimizing the mechanical properties of the test specimens and saving the support material. The study was carried out by mean of mechanical and physical characterization techniques as well as Scanning Electron Microscopy (SEM). The results indicated that the horizontal test specimen showed approximately 40% of material loss compared to the vertical test specimen showed a loss 8%. The ABS filament breakage occurred longitudinally on the edge of the horizontal test specimen while the ABS filament breakage was transversely by the separation of the ABS filament on the edge of the vertical tests. The breakage of the filament inside both test specimens was in the direction of the filaments.

Produção de biohidrogênio a partir de soro de leite em AnSBBR com recirculação da fase líquida

O presente estudo investigou a aplicação de dois tipos de AnSBBR (reatores anaeróbio com biofilme e operados em batelada e batelada alimentada sequenciais: com recirculação da fase líquida e com agitação) para produção de biohidrogênio tratando água residuária sintética (a base de soro de leite e lactose, respectivamente). O AnSBBR com recirculação da fase líquida, que foi o estudo principal do presente trabalho, apresentou problemas na produção de hidrogênio utilizando soro de leite como substrato. Algumas alternativas, como adaptação da biomassa com substratos puros de degradação mais fácil, controle do pH em valores muito baixos e diferentes formas de inoculação foram testadas, entretanto, sem obtenção de sucesso. A solução do problema foi obtida ao refrigerar o meio de alimentação a 4ºC para evitar a fermentação no frasco de armazenamento, retirar a ureia e a suplementação de nutrientes, e realizar lavagens periódicas do material suporte para retirada de parte da biomassa. Dessa forma eliminaram-se indícios de produção de H2S por possível ação de bactérias redutoras de sulfato (BRS) e atingiu-se uma produção estável de hidrogênio sem, entretanto, eliminar completamento o metano, que foi produzido em baixas concentrações. Depois de atingida a estabilidade, investigou-se a influência da concentração afluente de substrato, do tempo de enchimento e da temperatura na produção de biohidrogênio no AnSBBR com recirculação da fase líquida tratando soro de leite. O estudo da concentração afluente apresentou um ponto ótimo para a concentração de 5400 mgDQO.L-1, atingindo valores de 0,80 mol H2.mol-1 lactose e de 660 mL H2.L-1.d-1. O estudo do tempo de enchimento apresentou resultados similares para as condições analisadas. Com relação à temperatura, os melhores resultados foram obtidos com a temperatura mais baixa testada de 15ºC (1,12 mol H2.mol lactose-1 e 1080 mL H2.L-1.d-1), sendo que na temperatura mais alta testada (45°C) não ocorreu produção de hidrogênio. Para o AnSBBR com agitação mecânica, que foi um estudado complementar realizado pelo fato da lactose ser o principal complemento do soro de leite, o desempenho do biorreator foi avaliado de acordo com influência conjunta do tempo de ciclo (tC – 2, 3 e 4 h), da concentração afluente (CSTA – 3600-5400 mgDQO.L-1) e da carga orgânica volumétrica aplicada (COAV – 9,3, 12,3, 13,9, 18,5 e 27,8 mgDQO.L-1.d-1). Foram obtidos excelentes resultados: consumos de carboidratos (lactose), com valores médios sempre acima de 90% e uma produção estável de biohidrogênio em todas as condições estudadas, com metano em baixas concentrações apenas na condição de maior COAV. A diminuição do tC apresentou tendência clara de melhora sobre o RMCRC,n (rendimento molar entre hidrogênio produzido e carboidrato removido) apenas para as condições com menor concentração CSTA, havendo uma relação direta entre CSTA, e RMCRC,n em todos os valores de tC, exceto para o tempo de ciclo de 3 h, exatamente onde ocorreu produção de metano. O melhor valor de RMCRC,n obtido na operação com lactose (1,65 mol H2.mol Carboidrato-1) foi superior aos obtidos em outros trabalhos utilizando a mesma configuração de reator e sacarose como substrato. As análises filogenéticas mostraram que a maioria dos clones analisados foi semelhante à Clostridium. Além destes, clones filogeneticamente semelhantes com a Família Lactobacilaceae, especificamente Lactobacillus rhamnosus foram observados em menor porcentagem no reator, assim como clones com sequências semelhantes a Acetobacter indonesiensis.

Mapping the awareness of inequalities in health programs in Spanish communities: moving forward together

The aim of this study is to map the awareness of gender, socioeconomic, immigrant and ethnic health inequalities in health at schools, maternal health and traffic injury health prevention programs. The study was conducted in the 19 health descentralized areas in Spain, 17 autonomous community (ACs) and the 2 autonomous cities (ACities). The data were collected from May 2008 to January 2009. The unit of analysis was the collection of policy documents setting out the programs mentioned above and the related support material in each AC. A reading guide was used to analyze the awareness of inequalities. With regard to health at schools, 2 of 10 programs show a high awareness of inequalities and include many specific proposals to be implemented at the local level. Regarding maternal health, 13 ACs have prepared support material with high awareness of inequalities to be implemented. A traffic injury program has been created in two ACs. We map the whole situation in Spain regarding the health programs that we have used as examples and their awareness of inequalities. We can conclude that there are differences between the regions studied in Spain and in general, the awareness of inequalities is low.

Environmentally friendly reduction of a platinum catalyst precursor supported on polypyrrole

Supported metals are traditionally prepared by impregnating a support material with the metal precursor solution, followed by reduction in hydrogen at elevated temperatures. In this study, a polymeric support has been considered. Polypyrrole (PPy) has been chemically synthesized using FeCl3 as a doping agent, and it has been impregnated with a H2PtCl6 solution to prepare a catalyst precursor. The restricted thermal stability of polypyrrole does not allow using the traditional reduction in hydrogen at elevated temperature, and chemical reduction under mild conditions using sodium borohydride implies environmental concerns. Therefore, cold RF plasma has been considered an environmentally friendly alternative. Ar plasma leads to a more effective reduction of platinum ions in the chloroplatinic complex anchored onto the polypyrrole chain after impregnation than reduction with sodium borohydride, as has been evidenced by XPS. The increase of RF power enhanced the effectiveness of the Ar plasma treatment. A homogeneous distribution of platinum nanoparticles has been observed by TEM after the reduction treatment with plasma. The Pt/polypyrrol catalyst reduced by Ar plasma at 200 watts effectively catalyzed the aqueous reduction of nitrates with H2 to yield N2, with a very low selectivity to undesired nitrites and ammonium by-products.

Operations management

Operations management deals with the management of the creation of goods and the delivery of services to the customer. It plays an essential role in the success of any organization. In this book, Andrew Greasley provides a clear and accessible introduction to this important area of study, focusing on all key areas of operations in both manufacturing and service industries. Operations Management, Second Edition covers the main areas of operations strategy, the design of the operations system and the management of operations over time. Yet, its concise nature of the text means students are not overwhelmed by the amount of material presented. This new edition also features: New content in such areas such as the quality gap model, enterprise systems and business process management. Expanded case studies, to include more global and European cases and longer cases at the end of each chapter. Greater clarity in chapter material organization. Worked Examples providing a step–by–step guide to the procedure to solve quantitative problems. Visual redesign in full colour. More support material for students and lecturers, including an interactive WileyPLUS course. All lecturers can access supporting resources on the companion website at www.wiley.com/college/greasley including an Instructor’s Manual with suggested solutions for all case study questions and end of chapter exercises, a Test Bank and PowerPoint slides for each chapter. Students will find multiple–choice test quizzes, web–links and an online glossary. Operations Management is essential reading for all students studying operations management, whether on undergraduate, postgraduate or continuing professional development courses.

Green innovation management in the automotive industry

Online case studies. Managing Innovation is an established, bestselling text for MBA, MSc and advanced undergraduate courses on management of technology, innovation management and entrepreneurship. It is also used widely by managers in both the service and manufacturing sectors. Now in its fourth edition, Managing Innovation has been fully revised and updated based on extensive user feedback to incorporate the latest findings and techniques in innovation management. The authors have included a new and more explicit innovation model, which is used throughout the book and have introduced two new features – Research Notes and Views from the Front Line – to incorporate more real life case material into the book. The strong evidence–based and practical approach makes this a must–read for anyone studying or working within innovation. An extensive website accompanies this text at www.managing–innovation.com. Readers can browse an online database of audio and video clips, as well as case study material, interactive exercises and tools for innovation, whilst lecturers can find additional support material including instructor slides and teaching guides and tips. "Tidd and Bessant's text has become a standard for students and practitioners of innovation. They offer a lively account on innovation management full of interesting and new examples, but one that at the same is rigorously anchored in what we have learned over the last thirty years on how to manage that ultimate business challenge of renewing products, processes, and business models. Those who want to innovate must read this book." — Professor Arnoud De Meyer, Director, Judge Business School, University of Cambridge, UK "Innovation matters and this book by two leaders in the field which is clear and practical as well as rigorous should be essential reading for all seeking to study or to become involved in innovation." — Chris Voss, Professor of Operations and Technology Management, London Business School "...comprehensive and comprehensible compendium on the management of innovation. It is very well organized and very well presented. A pedagogic tool that will work at multiple levels for those wishing to gain deeper insights into some of the most challenging and important management issues of the day." — David J. Teece, Thomas W. Tusher Professor in Global Business, Haas School of Business, University of California, Berkeley, USA "Those of us who teach in the field of Innovation Management were delighted when the first edition of this book appeared 11 years ago. The field had long been in need of such a comprehensive and integrated empirically–based work. The fact that this is now the 4th edition is clear testimony to the value of its contribution. We are deeply indebted to the authors for their dedication and diligence in providing us with this updated and expanded volume." — Thomas J. Allen,Howard W. Johnson Professor of Management, MIT Sloan School of Management, USA.

Satisfação com a Vida e Redes Sociais Pessoais de Idosos

Objetivos: A investigação tem como objetivo geral analisar a associação entre a satisfação com a vida nos idosos e as características estruturais, funcionais e relacionais-contextuais das suas redes sociais pessoais. Metodologia: A recolha dos dados foi feita através de um questionário sociodemográfico, da Satisfaction With Life Scale – SWLS (Diener, 1985) que permite avaliar o grau de satisfação com a vida e também do Instrumento de Avaliação da Rede Social Pessoal – IARSP – Idosos (Guadalupe, 2009; Guadalupe & Vicente, 2012) que possibilita a análise das características das redes sociais pessoais dos idosos. Participantes: A amostra é constituída por 416 idosos com idades compreendidas entre os 65 anos e os 98 anos (M = 76,15; DP = 7,584). Os participantes são de ambos os sexos, mas na sua maioria do sexo feminino (63,7%; n = 265). A maioria dos sujeitos da amostra é casada (51,2%; n = 213) e tem escolaridade (64,2%; n = 267). Resultados: Verifica-se que são as mulheres idosas, os casados e com escolaridade que percebem uma maior satisfação com a vida. Constata-se que existe uma maior proporção de idosos satisfeitos com a vida (53,8%; n = 83) em comparação com os medianamente satisfeitos (26,2%; n = 109) e com os insatisfeitos (20%; n = 83). Os idosos que apresentam uma maior satisfação percebida têm uma média mais elevada na proporção das relações familiares nas redes (M = 80,67), no apoio emocional, material e instrumental, informativo, companhia social, e no acesso a novos vínculos, e consideram estar muito satisfeitos tanto com a rede (M = 2,92) como com o apoio que esta disponibiliza (M = 2,77). Conclusão: Verificaram-se associações estatisticamente significativas nas características estruturais da rede, no entanto são as características funcionais que atestam os principais resultados que nos permitem afirmar uma associação entre satisfação com a vida nos idosos e as relações interpessoais, pelo conteúdo das relações e pelo apoio que percecionam. Concluímos que os idosos que se consideram satisfeitos com a vida apresentavam, na generalidade, características de rede social mais positivas quando comparados com os que percebiam menor satisfação com a vida. / Objectives: The research has as main objective to analyze the association between life satisfaction in the elderly and the structural, functional and relational-contextual characteristics of their personal social networks. Methodology: The data collection was done through a sociodemographic questionnaire, the Satisfaction With Life Scale – SWLS (Diener, 1985) that evaluates the degree of satisfaction with life and also the Personal Social Network Analysis Tool – IARSP – Elderly (Guadalupe, 2009; Guadalupe & Vicente, 2012) for the analysis of personal social networks’ characteristics. Participants: The sample consisted of 416 elderly aged between 65 and 98 years (M = 76,15; SD = 7,584). Participants are both genders, but mostly female (63,7%; n =265). Most of the participants are married (51,2%; n = 213) and have education (64,2%; n = 267). Results: It is found that are the older women, married and with education that perceive a greater satisfaction with life. There is a greater proportion of elderly satisfied with the lives (53,8%; n = 83) compared to the moderately satisfied (26,2%; n = 109) and the unsatisfied (20%; n = 83). Seniors who have a higher satisfaction have a higher average in the proportion of family relationships in their networks (M = 80,67), emotional support, material and instrumental, informational, social companionship, and access to new bonds, and consider to be very satisfied with their social network (M = 2,92) and with the social support that it provides (M = 2,77). Conclusion: There were statistically significant associations in the structural characteristics of the network, however are the functional characteristics that allow us to state an association between life satisfaction in the elderly through interpersonal relationships, the content of relations and the support they perceive. We conclude that elderly people who consider themselves satisfied with life showed, in general, have more positive characteristics of social personal network when compared to those who perceive less satisfaction with life.

Reator de leito estruturado com recirculação submetido à aeração intermitente no tratamento de esgoto sanitário

The release of nitrogen compounds in water bodies can result in many environmental problems, so treat wastewater, such as sewage in order to remove not only organic matter but also nitrogen has been studied a few decades. From the above, the objective of this study was to evaluate the performance of a structured bed reactor, continuous flow, with recirculation, in removing organic matter and nitrogen present in wastewater under different cycles of intermittent aeration (AI) and to evaluate the influence of these cycles in the development of nitrifying bacteria (Oxidizing Bacteria Ammonia - BOA and Bacteria Oxidizing Nitrite - BON) and denitrifying (DESN) adhered (Support Material - MS) and suspension (Effluent - EF and sludge - LD). The reactor used has usable volume of 9.4 L. As support materials (MS) polyurethane foam was used, cut and fixed in PVC rods. 3 were worked aeration phases (AE) and non-aeration (AN) at different stage: Stage 1 (4 h EA / AN 2H); Stage 2 (2H EA / AN 1 h) and Phase 3 (2H EA / AN 2 h). During all hydraulic detention time phases was kept at 16 h and the effluent recirculated at a rate of 3 times the inflow. Were analyzed: pH, total alkalinity, temperature, chemical oxygen demand (COD), Biochemical Oxygen Demand (BOD), nitrogen Kjeldhl Total (NKT), ammonia-N-N-NH4+, nitrito-N-NO2+andnitrato-NO3-. The concentration of BOA, BON and DESN was determined using the number More Provável.gSSV-1 (NMP.gSSV-1). In phase 1 the percentage removal NTK N-NH4+ and NT was 76±10%, 70±21% and 67±10% respectively. In Phase 2 80±15% of removel NKT, 86±15% of N-NH4+ e 68±9% of removel NT e na Fase 3 de 58±20%, 72±28% and 41±6% of NKT, N-NH4+ of NT, respectively. The denitrification efficiency in stage 3 was over 70%, indicating that occurred in the reactor the process of simultaneous nitrification and denitrification (NDS). DQOT the removal percentages were 88 ± 4% in Phase 1, 94 ± 7 in Phase 2 and 90± 11% in Phase 3. The multivariate ANOVA applied to NMP.gSSV-1, it indicated that there was significant (F: 20,2, p <0,01) between the analyzed concentration of organisms AI in different cycles, but the differences between NMP.gSSV-1 depends not only isolated factors but of which means, and phase groups being analysis. From the results it is concluded that the working system is efficient in terms of nitrogen removal and organic matter, and that the stage with the highest availability of Dissolved Oxygen (DO) and C/N ratio (Step 2), was the one obtained the lower concentrations of organic matter effluents and N-NH4+. Hinted that there was a significant difference between the concentration (NMP.100mL-1) of the analyzed organizations (BOA, BON and DESN), but this difference does not depend on factors alone but of which means (MS, EF or LD), stages (1, 2 or 3) and groups (BOA, BON and DESN) is being considered.

Água como tema CTS no ensino médio : uma proposição

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Biológicas, Instituto de Física, Instituto de Química, Faculdade UnB Planaltina, Programa de Pós-Graduação em Ensino de Ciências, Mestrado Profissional em Ensino de Ciências, 2016.

WO3/C hybrid material as a highly active catalyst support for formic acid electrooxidation

The hybrid material based on WO3 and Vulcan XC-72R carbon has been used as the support of Pd nano-catalysts. The resultant Pd-WO3/C catalysts in a large range of WO3 content exhibit excellent catalytic activity and stability for formic acid electrooxidation. The great improvement in the catalytic performance is attributed to the uniform dispersion of Pd with less particle sizes on the WO3/C support and the hydrogen spillover effect which greatly accelerates the dehydrogenation of HCOOH on Pd.

Operator organizational direct support and general support maintenance manual including basic issue items list and repair parts list : small arms targets and target material.

"NAVPERS 15217."

Operator, organizational, direct support and general support maintenance manual, including basic issue items list and repair parts list : small arms targets and target material.

"Department of the Navy publication NAVPERS 15217."

Direct support and general support maintenance repair parts and special tools lists (including depot maintenance repair parts and special tools lists) : truck, cargo, 8 ton, 4x4, M520 w/winch NSN 2320-00-873-5422, truck, cargo, 8 ton, 4x4, M520 w/o winch NSN 2320-00-191-1310, truck, cargo, 8 ton, 4x4, M877 w/winch, w/material handling crane NSN 2320-01-010-4956 ....

"October 1985."

Direct support and general support maintenance repair parts and special tools lists (including depot maintenance repair parts and special tools lists) : truck, cargo, 8 ton, 4x4, M520 w/winch NSN 2320-00-873-5422, truck, cargo, 8 ton, 4x4, M520 w/o winch NSN 2320-00-191-1310, truck, cargo, 8 ton, 4x4, M877 w/winch, w/material handling crane NSN 2320-01-010-4956 ....

Includes index.

Direct support and general support maintenance repair parts and special tools lists : distributor, liquid bituminous material, tankless type, trailer mtd., 4 to 24 ft. spraybar, 375 GPM pump, gasoline driven, NSN 3895-00-767-0247, Seaman-Gunnison model MTD.

Includes index.