Construction, application and validation of selection evaluation model (SEM) for intelligent HVAC control system

Design teams are confronted with the quandary of choosing apposite building control systems to suit the needs of particular intelligent building projects, due to the availability of innumerable ‘intelligent’ building products and a dearth of inclusive evaluation tools. This paper is organised to develop a model for facilitating the selection evaluation for intelligent HVAC control systems for commercial intelligent buildings. To achieve these objectives, systematic research activities have been conducted to first develop, test and refine the general conceptual model using consecutive surveys; then, to convert the developed conceptual framework into a practical model; and, finally, to evaluate the effectiveness of the model by means of expert validation. The results of the surveys are that ‘total energy use’ is perceived as the top selection criterion, followed by the‘system reliability and stability’, ‘operating and maintenance costs’, and ‘control of indoor humidity and temperature’. This research not only presents a systematic and structured approach to evaluate candidate intelligent HVAC control system against the critical selection criteria (CSC), but it also suggests a benchmark for the selection of one control system candidate against another.

Extending constructability concept to include operation and maintenance issues

The concept of constructability uses integration art of individual functions through a valuable and timely construction inputs into planning and design development stages. It results in significant savings in cost and time needed to finalize infrastructure projects. However, available constructability principles, developed by CII Australia (1993), do not cover Operation and Maintenance (O&M) phases of projects, whilst major cost and time in multifaceted infrastructure projects are spent in post-occupancy stages. This paper discusses the need to extend the constructability concept by examining current O&M issues in the provision of multifaceted building projects. It highlights available O&M problems and shortcomings of building projects, as well as their causes and reasons in different categories. This initial categorization is an efficient start point for testing probable present O&M issues in various cases of complex infrastructure building projects. This preliminary categorization serve as a benchmark to develop an extended constructability model that considers the whole project life cycle phases rather than a specific phase. It anticipates that the development of an extended constructability model can reduce significant number of reworks, mistakes, extra costs and time wasted during delivery stages of multifaceted building projects.

Project manager competencies in a knowledge-based society

The construction phase of building projects is often a crucial influencing factor in success or failure of projects. Project managers are believed to play a significant role in firms’ success and competitiveness. Therefore, it is important for firms to better understand the demands of managing projects and the competencies that project managers require for more effective project delivery. In a survey of building project managers in the state of Queensland, Australia, it was found that management and information management system are the top ranking competencies required by effective project managers. Furthermore, a significant number of respondents identified the site manager, construction manager and client’s representative as the three individuals whose close and regular contacts with project managers have the greatest influence on the project managers’ performance. Based on these findings, an intra-project workgroups model is proposed to help project managers facilitate more effective management of people and information on building projects.

Organisational obstacles to reducing carbon emissions in Hong Kong

An emerging theme for a nation transiting into a sustainable future is the provision of a low carbon (dioxide) environment. Carbon emission reduction is therefore important for the industry and community as a whole. Buildings contribute immensely to total greenhouse gas emissions, so pragmatic actions need to be taken to cut the amount of carbon emitted by the construction industry. These typically involve strategies such as energy-saving features in the design, construction and operation of building projects. However, a variety of characteristics of the markets and stakeholders involved are suppressing their development. This paper reports on a series of interviews with a variety of Hong Kong construction project participants aimed at identifying the drivers of, and obstacles to, the construction industry's attempts to reduce carbon emissions. The results confirm the main actions currently undertaken are energy efficiency enhancement, green procurement, research and development activities, waste/water management and other technical measures such as the provision of thermal insulation. The majority of the drivers are economical in nature, suggesting that financial aids, and particularly government incentives, are likely to be useful motivators. Also suggested is the increased promotion of the benefits of environmental sustainability to the wider community, in order to alert the general public to the need for reducing the amount of carbon originating from building usage.

Which procurement system? Towards a universal procurement selection technique

Two approaches are described, which aid the selection of the most appropriate procurement arrangements for a building project. The first is a multi-attribute technique based on the National Economic Development Office procurement path decision chart. A small study is described in which the utility factors involved were weighted by averaging the scores of five 'experts' for three hypothetical building projects. A concordance analysis is used to provide some evidence of any abnormal data sources. When applied to the study data, one of the experts was seen to be atypical. The second approach is by means of discriminant analysis. This was found to provide reasonably consistent predictions through three discriminant functions. The analysis also showed the quality criteria to have no significant impact on the decision process. Both approaches provided identical and intuitively correct answers in the study described. Some concluding remarks are made on the potential of discriminant analysis for future research and development in procurement selection techniques.

Design-build contractor selection for public sustainable buildings

Design-build (DB) is regarded as an effective means of delivering high performance green buildings, and the selection of DB contractors is of critical importance. The objective of this study is to evaluate the selection of design-builders for public buildings seeking Leadership in Energy and Environmental Design (LEED) certification and compare the selection practices involved with those of non-LEED-seeking DB projects through a robust content analysis of 74 DB request for proposals (RFPs) for public DB projects. The results of the content analysis reveal that the level of LEED certification is the dominant means of conveying the sustainability requirements in RFPs for contractor selection, with the majority of RFPs (60%) including sustainability requirements as part of the contractor evaluation package. With the exception of contractors' past performance, there is no statistically significant difference in the importance weightings of selection criteria between LEED-seeking and non-LEED-seeking buildings, and DB owners tend to place more emphasis on innovative technical solutions rather than the past performance of DB contractors. Additionally, the research findings also indicate that owners of LEED-seeking building projects tend to provide less design decisions in RFPs in order to solicit innovative design alternatives from potential DB contractors. This study provides DB owners with a number of practical implications for selecting appropriate design-builders for green DB projects.

The value of storytelling

Considering the embodied carbon in existing buildings where expenditure has already occurred, the retrofitting of existing buildings presents a significant opportunity to reduce the carbon footprint of our built environment. In Australia there is also a renewed awareness of the importance of our cultural heritage and the adaptive reuse of our historic buildings is increasingly discussed as a preservation strategy. The ‘design’ phase in building projects is credited with providing “an unparalleled window of opportunity to address environmental objectives” and fostering sustainable development, with up to 80% of overall environmental impacts determined by the decisions made at this stage. Both design and built environment professionals appreciate that a holistic and ‘whole systems’ approach is key in enabling transformation. The design process often comprises of many divergent and convergent activities, many of which seek to understand the people and context. The design process for heritage building adaptive reuse projects revolves around producing or referring to a conservation management plan that articulates what is and isn't heritage fabric. In an Australian context, and according to literature and the emerging results of a series of semi-structured interviews undertaken with designers of such projects, the key themes integral to success are: business case, vision, communication & collaboration, values, and storytelling.

Climate resilience of schools: a case study

Social and political concerns are frequently reflected in the design of school buildings, often in turn leading to the development of technical innovations. One example is a recurrent concern about the physical health of the nation, which has at several points over the last century prompted new design approaches to natural light and ventilation. The most critical concern of the current era is the global, rather than the indoor, environment. The resultant political focus on mitigating climate change has resulted in new regulations, and in turn considerable technical changes in building design and construction. The vanguard of this movement has again been in school buildings, set the highest targets for reducing operational carbon by the previous Government. The current austerity measures have moved the focus to the refurbishment and retrofit of existing buildings, in order to bring them up to the exacting new standards. Meanwhile there is little doubt that climate change is happening already, and that the impacts will be considerable. Climate scientists have increasing confidence in their predictions for the future; if today’s buildings are to be resilient to these changes, building designers will need to understand and design for the predicted climates in order to continue to provide comfortable and healthy spaces through the lifetimes of the buildings. This paper describes the decision processes, and the planned design measures, for adapting an existing school for future climates. The project is at St Faith’s School in Cambridge, and focuses on three separate buildings: a large Victorian block built as a substantial domestic dwelling in 1885, a smaller single storey 1970s block with a new extension, and an as-yet unbuilt single storey block designed to passivhaus principles and using environmentally friendly materials. The implications of climate change have been considered for the three particular issues of comfort, construction, and water, as set out in the report on Design for Future Climate: opportunities for adaptation in the built environment (Gething, 2010). The adaptation designs aim to ensure each of the three very different buildings remains fit for purpose throughout the 21st century, continuing to provide a healthy environment for the children. A forth issue, the reduction of carbon and the mitigation of other negative environmental impacts of the construction work, is also a fundamental aim for the school and the project team. Detailed modelling of both the operational and embodied energy and carbon of the design options is therefore being carried out, in order that the whole life carbon costs of the adaptation design options may be minimised. The project has been funded by the Technology Strategy Board as part of the Design for Future Climates programme; the interdisciplinary team includes the designers working on the current school building projects and the school bursar, supported by researchers from the University of Cambridge Centre for Sustainable Development. It is hoped that lessons from the design process, as well as the solutions themselves, will be transferable to other buildings in similar climatic regions.

Projecto de fundações e estrutura de um edifício

Trabalho de Projecto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Estruturas

An experimental approach to project risk identification and prioritization

One of the aims of a broad ethnographic study into how the apportionment of risk influences pricing levels of contactors was to ascertain the significant risks affecting contractors in Ghana, and their impact on prices. To do this, in the context of contractors, the difference between expected and realized return on a project is the key dependent variable examined using documentary analyses and semi-structured interviews. Most work in this has focused on identifying and prioritising risks using relative importance indices generated from the analysis of questionnaire survey responses. However, this approach may be argued to constitute perceptions rather than direct measures of the project risk. Here, instead, project risk is investigated by examining two measures of the same quantity; one ‘before’ and one ‘after’ construction of a project has taken place. Risks events are identified by ascertaining the independent variables causing deviations between expected and actual rates of return. Risk impact is then measured by ascertaining additions or reductions to expected costs due to the occurrence of risk events. So far, data from eight substantially complete building projects indicates that consultants’ inefficiency, payment delays, subcontractor-related problems and changes in macroeconomic factors are significant risks affecting contractors in Ghana.

Experiential learning in practice as research: context, method, knowledge

Creative arts research is often motivated by emotional, personal and subjective concerns; it operates not only on the basis of explicit and exact knowledge, but also on that of tacit and experiential knowledge. Experience operates within in the domain of the aesthetic and knowledge produced through aesthetic experience is always contextual and situated. The continuity of artistic experience with normal processes of living is derived from an impulse to handle materials and to think and feel through their handling. The key term for understanding the relationship between experience, practice and knowledge is 'aesthetic experience', not as it is understood through traditional eighteenth century accounts, but as 'sense activity'.

In this article, I will draw on the work of John Dewey, Michael Polanyi and others to argue that creative arts practice as research is an intensification of everyday experiences from which new knowledge or knowing emerges. The ideas presented here will be illustrated with reference to case studies based on reflections, by the artists themselves, on successful research projects in dance, creative writing and visual art.

How architects incorporate ESD criteria into the design process

This paper will seek to answer; "How do architects in Victoria incorporate Ecologically Sustainable Development (ESD) criteria into the design process?" For the purpose of this paper, "Ecologically Sustainable Development" is defined in line with the judging criteria used by the Royal Australian Institute of Architects for the 'Sustainable Architecture Award'. The RAIA states that (Maddison, 2003 p.7), "the goal of sustainable architecture is to achieve development that improves the total quality of life, in a way that maintains the processes on which life depends. The project assessment covers ecologically sustainable development and energy efficient design:' By researching exemplary building projects that have been awarded a Victorian Sustainable Architecture Award, this paper will enlighten a design methodology for the pursuit of excellence in ecologically sustainable development. Key elements in the design process will be determined by comparing and analysing the processes of different architectural practices. This will be achieved through the study of published literature on the award winning designs, qualitative analysis of interviews with the architects who designed the selected projects and quantitative analysis of questionnaires completed by the architects.

Creative arts research : a pedagogical perspective

This paper emerges from current work related to a number of research projects across several creative arts disciplines. It poses the following questions: What implication does creative arts research have for extending our understandings of the role of experiential, problem-based learning and multiple intelligences in the production of knowledge? How can the application of such understandings influence policy and enhance opportunities for support of creative arts research in the university and the broader arena? In a previous paper examining the function of the exegesis (Barrett, 2004), I referred to the suggestion made by Lauchlan Chipman that: in a knowledge economy, it is necessary for a large number of people to comprehend the creative output of others in order for such output to be sufficiently taken up for the enhancement of society. This paper is an extension of the previous one in its attempt to promote wider understanding of the value of creative arts research. I will focus on the dialogic relationship between the exegesis and studio practice in painting, creative writing, performance and dance, in order to demonstrate that creative arts enquiry can promote a more profound understanding of how knowledge is revealed, acquired and expressed. Four successful research projects will be examined as 'case studies' to show how creative arts research methodologies may be applied in the development of more critical and innovative pedagogies and to argue that the role of creative arts research is still to be fully realized and acknowledged in the knowledge economy.

Experiential learning in practice as research : context, method, knowledge

Creative arts research is often motivated by emotional, personal and subjective concerns; it operates not only on the basis of explicit and exact knowledge, but also on that of tacit and experiential knowledge. Experience operates within in the domain of the aesthetic and knowledge produced through aesthetic experience is always contextual and situated. The continuity of artistic experience with normal processes of living is derived from an impulse to handle materials and to think and feel through their handling. The key term for understanding the relationship between experience, practice and knowledge is ‘aesthetic experience’, not as it is understood through traditional eighteenth century accounts, but as ‘sense activity’. In this article, I will draw on the work of John Dewey, Michael Polanyi and others to argue that creative arts practice as research is an intensification of everyday experiences from which new knowledge or knowing emerges. The ideas presented here will be illustrated with reference to case studies based on reflections, by the artists themselves, on successful research projects in dance, creative writing and visual art.

How community development programmes can foster re-engagement with learning in disadvantaged communities : leadership as process

Family and community capacity building projects in Tasmania are attempting to address the disadvantage of communities marginalised by socio-economic and other influences. Collaborations between the projects, community members and groups, and education and training organisations, have resulted in a leadership process which has fostered reengagement with learning in these disadvantaged communities. This study uses an ethnographic research methodology to examine the experiences of a number of new students or trainees, and the partnerships and collaborations which evolved between community development programmes, community members and groups, and educational and training organisations. Such collaborations may develop into dynamic leadership processes, enhancing social capital formation — thereby fostering genuine community development — while also facilitating re-engagement with learning.