Influence of heat treatment on the sensory and physical characteristics and carbohydrate fractions of french-fried potatoes (Solanum tuberosum L.)

AbstractThe aim of this study was to analyze the impact that heat treatment with salts and freezing processes on the sensory, instrumental, and physico-chemical characteristics of fried potatoes of the Monalisa cultivar. The potatoes were blanched in distilled water (P); sodium chloride solution (B1); calcium chloride solution (B2), and a solution with both of these salts (B3). They were then pre-cooked and frozen for 24 hours and for 30 days. After frying, sensory characteristics were analyzed (color, texture, flavor, oiliness), along with overall preference and instrumental determinations of texture, color, and oil content. Further tests were conducted on the sample with the best results in the sensory analysis (B1), along with sample P as a control, to determine granule microstructure, carbohydrate fractions, glycemic index, and glycemic load. Blanching B3, despite reducing oil absorption and providing less oiliness, obtained lesser overall preference. Freezing for 30 days increased the lightness, except for when sodium chloride was used, which intensified the color yellow. The use of sodium chloride did not interfere with the type of starch granules, nor with the formation of resistant starch; however, longer freezing time reduced the glycemic index and concentrated the dietary fiber content. All samples exhibited low glycemic index and moderate glycemic loads.

Chemical, morphological, and thermogravimetric of Terminalia catappa Linn

The objective of this study is to evaluate the chemical composition, morphology, and the thermogravimetric behavior of the pulp of Terminalia catappa, also known as tropical almond. The analytical results show, based mainly on its lipid content, that this fruit has a considerable energy value. Its fiber content contributes to enhance the functional properties of the fruit. Morphological characteristics show a spongy-like structure with dispersion of starch granules and high concentration of fiber bundles, confirming the results of the chemical composition analysis. The thermogravimetric behavior exhibited by this fruit pulp when submitted to progressive temperature increase under dynamic air atmosphere shows that this raw material has great potential for industrial use due to its high absorption rate of water soluble and/or lipid-based compounds, allowing its use as a dietary complement or supplement ingredient in food products.

Investigation of the fracture mode for hard and soft wheat endosperm using the loading-unloading bending test

Investigation of the fracture mode for hard and soft wheat endosperm was aimed at gaining a better understanding of the fragmentation process. Fracture mechanical characterization was based on the three-point bending test which enables stable crack propagation to take place in small rectangular pieces of wheat endosperm. The crack length can be measured in situ by using an optical microscope with light illumination from the side of the specimen or from the back of the specimen. Two new techniques were developed and used to estimate the fracture toughness of wheat endosperm, a geometric approach and a compliance method. The geometric approach gave average fracture toughness values of 53.10 and 27.0 J m(-2) for hard and soft endosperm, respectively. Fracture toughness estimated using the compliance method gave values of 49.9 and 29.7 J m(-2) for hard and soft endosperm, respectively. Compressive properties of the endosperm in three mutually perpendicular axes revealed that the hard and soft endosperms are isotropic composites. Scanning electron microscopy (SEM) observation of the fracture surfaces and the energy-time curves of loading-unloading cycles revealed that there was a plastic flow during crack propagation for both the hard and soft endosperms, and confirmed that the fracture mode is significantly related to the adhesion level between starch granules and the protein matrix.

Surface properties and locations of gluten proteins and lipids revealed using confocal scanning laser microscopy in bread dough

Surface properties of gluten proteins were measured in a dilation test and in compression and expansion tests. The results showed that monomeric gliadin was highly surface active, but polymer glutenin had almost no surface activity. The locations of those proteins in bread dough were investigated using confocal scanning laser microscopy and compared with polar and nonpolar lipids. Added gluten proteins participated in the formation of the film or the matrix, surrounding and separating individual gas cells in bread dough. Gliadin was found in the bulk of dough and gas 'cell walls'. Glutenin was found only in the bulk dough. Polar lipids were present in the protein matrix and in gas 'cell walls', as well as at the surface of some particles, which appeared to be starch granules. However, nonpolar lipid mainly occur-red on the surface of particles, which may be starch granules and small lipid droplets. It is suggested that the locations of gluten proteins in bread dough depends on their surface properties. Polar lipid participates the formation of gluten protein matrix and gas 'cell walls'. Nonpolar lipids may have an effect on the rheological properties by associating with starch granule surfaces and may form lipid droplets. (C) 2004 Published by Elsevier Ltd.

Optimization of a sponge cake formulation with inulin as fat replacer: structure, physicochemical, and sensory properties

The effects of several fat replacement levels (0%, 35%, 50%, 70%, and 100%) by inulin in sponge cake microstructure and physicochemical properties were studied. Oil substitution for inulin decreased significantly (P < 0.05) batter viscosity, giving heterogeneous bubbles size distributions as it was observed by light microscopy. Using confocal laser scanning microscopy the fat was observed to be located at the bubbles’ interface, enabling an optimum crumb cake structure development during baking. Cryo-SEM micrographs of cake crumbs showed a continuous matrix with embedded starch granules and coated with oil; when fat replacement levels increased, starch granules appeared as detached structures. Cakes with fat replacement up to 70% had a high crumb air cell values; they were softer and rated as acceptable by an untrained sensory panel (n = 51). So, the reformulation of a standard sponge cake recipe to obtain a new product with additional health benefits and accepted by consumers is achieved.

Effect of fat replacement by inulin on textural and structural properties of short dough biscuits

The aim of this study was to evaluate the effects of inulin as fat replacer on short dough biscuits and their corresponding doughs. A control formulation, with no replacement, and four formulations in which 10, 20, 30, and 40 % of shortening was replaced by inulin were studied. In the dough, shortening was observed surrounding flour components. At higher fat replacement levels, flour was more available for hydration leading to significant (P<0.05) harder doughs: from 2.76 (0.12)N in 10 % fat-replaced biscuits to 5.81 (1.56)N in 30 % fat-replaced ones. Biscuit structure was more continuous than dough structure. A continuous fat layer coated the matrix surface, where starch granules were embedded. In general, weight loss during baking and water activity decreased significantly (P<0.05) as fat replacement increased. Biscuit dimensions and aeration decreased when fat replacement increased, e.g., width gain was +1.20 mm in 10 fat-replaced biscuits and only +0.32 mm in 40 % fat-replaced ones. Panelist found biscuits with 20 % of fat replacement slightly harder than control biscuits. It can be concluded that shortening may be partially replaced, up to 20 %, with inulin. These low fat biscuits are similar than the control biscuits, and they can have additional health benefits derived from inulin presence.

Functionality of several cake ingredients: a comprehensive approach

The roles of some cake ingredients – oil, a leavening agent, and inulin – in the structure and physicochemical properties of batter and cakes were studied in four different formulations. Oil played an important role in the batter stability, due to its contribution to increasing batter viscosity and occluding air during mixing. The addition of the leavening agent was crucial to the final height and sponginess of the cakes. When inulin was used as a fat replacer, the absence of oil caused a decrease in the stability of the batter, where larger air bubbles were occluded. Inulin dispersed uniformly in the batter could create a competition for water with the flour components: gluten was not properly hydrated and some starch granules were not fully incorporated into the matrix. Thus, the development of a continuous network was disrupted and the cake was shorter and softer; it contained interconnected air cells in the crumb, and was easily crumbled. The structure studies were decisive to understand the physicochemical properties.

Commercial thickeners used by patients with dysphagia: rheological and structural behaviour in different food matrices

In order to achieve a safe swallowing in patients with dysphagia, liquids must be thickened. In this work, two commercial starch based thickeners dissolved in water, whole milk, apple juice and tomato juice were studied. The thickeners were Resource®, composed of modified maize starch and Nutilis®, composed of modified maize starch and gums. They were formulated at two different concentrations corresponding to nectar- and pudding-like consistencies. Influence of composition, concentration and food matrix on rheological properties and structure of the resulting pastes were analysed. Viscoelastic measurements and microscopic observations of the thickeners dissolved in water revealed structural differences due to the presence of gums. When the thickeners were dissolved in the other food matrices significant statistical interactions were found between the matrix and the thickener-type in both the viscoelastic and flow parameters. The most relevant differences were observed for the nectar-like consistency with Nutilis® thickener in milk and apple juice. These samples had lower zero viscosity values and higher loss tangent values, that corresponded to weaker structured systems. Light microscopy images showed that the matrix formed by swollen starch granules was interrupted by the presence of gums. The structure of the matrices in pudding-like formulations became more continuous irrespectively of the matrix employed, and also differences in viscoelasticity among samples diminished. Although differences were observed in zero shear viscosity values among samples, the viscosity of the beverages at 50 s−1 – commonly used as a reference for swallowing – was similar for all samples regardless of the matrix used.

HOST-MEDIATED INDUCTION OF alpha-AMYLASES BY LARVAE OF THE MEXICAN BEAN WEEVIL Zabrotes subfasciatus (COLEOPTERA: CHRYSOMELIDAE: BRUCHINAE) IS IRREVERSIBLE AND OBSERVED FROM THE INITIATION OF THE FEEDING PERIOD

Larvae of Zabrotes subfasciatus secrete alpha-amylases that are insensitive to the alpha-amylase inhibitor found in seeds of Phaseolus vulgaris. By analyzing amylase activities during larval development on P. vulgaris, we detected activity of the constitutive amylase and the two inducible amylase isoforms at all stages. When larvae were transferred from the non alpha-amylase inhibitor containing seeds of Vigna unguiculata to P. vulgaris, the inducible alpha-amylases were expressed at the same level as in control larvae fed on P. vulgaris. Interestingly, when larvae were transferred from seeds of P. vulgaris to those of V. unguiculata, inducible alpha-amylases continued to be expressed at a level similar to that found in control larvae fed P. vulgaris continuously. When 10-day-old larvae were removed from seeds of V. unguiculata and transferred into capsules containing flour of P. vulgaris cotyledons, and thus maintained until completing 17 days ( age when the larvae stopped feeding), we could detect higher activity of the inducible alpha-amylases. However, when larvae of the same age were transferred from P. vulgaris into capsules containing flour of V. unguiculata, the inducible alpha-amylases remained up-regulated. These results suggest that the larvae of Z. subfasciatus have the ability to induce insensitive amylases early in their development. A short period of feeding on P. vulgaris cotyledon flour was sufficient to irreversibly induce the inducible alpha-amylase isoforms. Incubations of brush border membrane vesicles with the alpha-amylase inhibitor 1 from P. vulgaris suggest that the inhibitor is recognized by putative receptors found in the midgut microvillar membranes. (C) 2010 Wiley Periodicals, Inc.

Sucrose and nitrogen supplies regulate growth of maize kernels

The growth of maize (Zea mays L.) kernels depends on the availability of carbon (C) and nitrogen (N) assimilates supplied by the mother plant and the capacity of the kernel to use them. Our objectives were to study the effects of N and sucrose supply levels on growth and metabolism of maize kernels. Kernel explants of Pioneer 34RO6 were cultured in vitro with varying combinations of N (5 to 30 mM) and sucrose (117 to 467 mM). Maximum kernel growth was obtained with 10 mM N and 292 mM sucrose in the medium, and a deficiency of one assimilate could not be overcome by a sufficiency of the other. Increasing the N supply led to increases in the kernel sink capacity (number of cells and starch granules in the endosperm), activity of certain enzymes (soluble and bound invertases, sucrose synthase, and aspartate aminotransaminase), starch, and the levels of N compounds (total-N, soluble protein, and free amino acids), and decreased the levels of C metabolites (sucrose and reducing sugars). Conversely, increasing the sucrose supply increased the level of endosperm C metabolites, free amino acids, and ADPG-PPase and alanine transaminase activities, but decreased the activity of soluble invertase and concentrations of soluble protein and total-N. Thus, while C and N are interdependent and essential for accumulation of maximum kernel weight, they appear to regulate growth by different means. Nitrogen supply aids the establishment of kernel sink capacity, and promotes activity of enzymes relating to sucrose and nitrogen uptake, while sucrose regulates the activities df invertase and ADPG-PPase. (C) 1999 Annals of Botany Company.

Digital Light Microscopy of Macroporous Ceramics Processed by Consolidation Casting with Mixtures of Native Starches

Porosity in starch consolidation casting technique is rightly related to original size and morphology of starch granules, leaving a pore structure after burning out. This work reports the results for the addition of different native potato and corn starch proportions in suspension,; with TiO(2) (rutile) powder. Gelling temperature have been defined after observation under light microscopy using a heating stage. Analysis of porous network and isolated pores have been clone from images of samples surfaces obtained by depth from focus reconstruction, revealing a qualitative correlation of pores characteristics and starches additions in suspensions, suggesting that the presence of isolated or interconnected pores can be handled by starches selection to control the amylopectin and amylose contents in slurries. Also, the analysis of porous fraction distribution shows no consistent pattern through specimens' volume according to starches in mixtures.

Extração e caracterização de amido de jacatupé (Pachyrhizus ahipa)

O gênero Pachyrhizus tem sido estudado como fonte de matéria-prima amilácea devido ao considerável teor de amido nas raízes de suas espécies. Neste trabalho objetivou-se caracterizar raízes de P. ahipa, processar em laboratório para a extração do amido e analisá-lo quanto à composição centesimal, teor de amilose, formato e tamanho de grânulos em microscópio eletrônico de varredura e viscosidade das pastas (RVA). As raízes de P. ahipa apresentaram 18% de massa seca sendo 7,68% amido. O rendimento obtido de amido foi baixo (4,28%), apontando para a necessidade de estudos que melhorem o processo de extração. O produto obtido apresentou 12,3% de umidade, 84% de amido com 13% de amilose e baixos teores de outros componentes (base úmida). A análise em microscópio eletrônico de varredura mostrou grânulos de amido de formas circular e poligonal, com tamanho variando entre 10 e 25mm. O perfil de viscosidade apresentado por este amido mostrou baixa temperatura de pasta (56ºC) e pico de viscosidade a 272 RVU, estando este último valor próximo ao observado para amido de mandioca, sob as mesmas condições. O amido de P. ahipa apresentou ainda, baixa estabilidade da pasta a quente e tendência à retrogradação com o resfriamento.

Efeito da concentração de ácido lático sobre a propriedade de expansão em amidos modificados fotoquimicamente

Uma característica valorizada pelo setor alimentício é a propriedade de expansão dos grânulos de amido. Com este trabalho, teve-se por objetivo avaliar o efeito da concentração de ácido lático durante tratamento de modificação fotoquímica das féculas de batata-doce (Ipomoea batatas), biri (Canna edulis), mandioca (Manihot esculenta) e taioba (Xanthosoma sagittifolium). Pelos resultados obtidos neste experimento, nas condições em que este foi realizado, conclui-se que a concentração de ácido lático interferiu na propriedade de expansão das féculas de batata-doce, mandioca e taioba e não apresentou efeito na fécula de biri, devendo ser ajustado para cada tipo de fécula a ser modificada. Os índices de expansão obtidos nas diferentes féculas foram considerados baixos, quando comparados aos índices obtidos para fécula de mandioca modificada.

Effect of acid-methanol treatment on the physicochemical and structural characteristics of cassava and maize starches

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Gelatinization properties of native starches and their Naegeli dextrins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)