Controlled nerve growth factor release from multi-ply alginate/chitosan-based nerve conduits.

The delivery kinetics of growth factors has been suggested to play an important role in the regeneration of peripheral nerves following axotomy. In this context, we designed a nerve conduit (NC) with adjustable release kinetics of nerve growth factor (NGF). A multi-ply system was designed where NC consisting of a polyelectrolyte alginate/chitosan complex was coated with layers of poly(lactide-co-glycolide) (PLGA) to control the release of embedded NGF. Prior to assessing the in vitro NGF release from NC, various release test media, with and without stabilizers for NGF, were evaluated to ensure adequate quantification of NGF by ELISA. Citrate (pH 5.0) and acetate (pH 5.5) buffered saline solutions containing 0.05% Tween 20 yielded the most reliable results for ELISA active NGF. The in vitro release experiments revealed that the best results in terms of reproducibility and release control were achieved when the NGF was embedded between two PLGA layers and the ends of the NC tightly sealed by the PLGA coatings. The release kinetics could be efficiently adjusted by accommodating NGF at different radial locations within the NC. A sustained release of bioactive NGF in the low nanogram per day range was obtained for at least 15days. In conclusion, the developed multi-ply NGF loaded NC is considered a suitable candidate for future implantation studies to gain insight into the relationship between local growth factor availability and nerve regeneration.

Hazardous substances in frequently used professional cleaning products.

A growing number of studies have identified cleaners as a group at risk for adverse health effects of the skin and the respiratory tract. Chemical substances present in cleaning products could be responsible for these effects. Currently, only limited information is available about irritant and health hazardous chemical substances found in cleaning products. We hypothesized that chemical substances present in cleaning products are known health hazardous substances that might be involved in adverse health effects of the skin and the respiratory tract. We performed a systematic review of cleaning products used in the Swiss cleaning sector. We surveyed Swiss professional cleaning companies (n = 1476) to identify the most used products (n = 105) for inclusion. Safety data sheets (SDSs) were reviewed and hazardous substances present in cleaning products were tabulated with current European and global harmonized system hazard labels. Professional cleaning products are mixtures of substances (arithmetic mean 3.5 +/- 2.8), and more than 132 different chemical substances were identified in 105 products. The main groups of chemicals were fragrances, glycol ethers, surfactants, solvents; and to a lesser extent, phosphates, salts, detergents, pH-stabilizers, acids, and bases. Up to 75% of products contained irritant (Xi), 64% harmful (Xn) and 28% corrosive (C) labeled substances. Hazards for eyes (59%) and skin (50%), and hazards by ingestion (60%) were the most reported. Cleaning products potentially give rise to simultaneous exposures to different chemical substances. As professional cleaners represent a large workforce, and cleaning products are widely used, it is a major public health issue to better understand these exposures. The list of substances provided in this study contains important information for future occupational exposure assessment studies.

Occupational respiratory exposures to irritating and sensitizing volatile compounds deriving from cleaning products

Recent findings suggest an association between exposure to cleaning products and respiratory dysfunctions including asthma. However, little information is available about quantitative airborne exposures of professional cleaners to volatile organic compounds deriving from cleaning products. During the first phases of the study, a systematic review of cleaning products was performed. Safety data sheets were reviewed to assess the most frequently added volatile organic compounds. It was found that professional cleaning products are complex mixtures of different components (compounds in cleaning products: 3.5 ± 2.8), and more than 130 chemical substances listed in the safety data sheets were identified in 105 products. The main groups of chemicals were fragrances, glycol ethers, surfactants, solvents; and to a lesser extent phosphates, salts, detergents, pH-stabilizers, acids, and bases. Up to 75% of products contained irritant (Xi), 64% harmful (Xn) and 28% corrosive (C) labeled substances. Hazards for eyes (59%), skin (50%) and by ingestion (60%) were the most reported. Monoethanolamine, a strong irritant and known to be involved in sensitizing mechanisms as well as allergic reactions, is frequently added to cleaning products. Monoethanolamine determination in air has traditionally been difficult and air sampling and analysis methods available were little adapted for personal occupational air concentration assessments. A convenient method was developed with air sampling on impregnated glass fiber filters followed by one step desorption, gas chromatography and nitrogen phosphorous selective detection. An exposure assessment was conducted in the cleaning sector, to determine airborne concentrations of monoethanolamine, glycol ethers, and benzyl alcohol during different cleaning tasks performed by professional cleaning workers in different companies, and to determine background air concentrations of formaldehyde, a known indoor air contaminant. The occupational exposure study was carried out in 12 cleaning companies, and personal air samples were collected for monoethanolamine (n=68), glycol ethers (n=79), benzyl alcohol (n=15) and formaldehyde (n=45). All but ethylene glycol mono-n-butyl ether air concentrations measured were far below (<1/10) of the Swiss eight hours occupational exposure limits, except for butoxypropanol and benzyl alcohol, where no occupational exposure limits were available. Although only detected once, ethylene glycol mono-n-butyl ether air concentrations (n=4) were high (49.5 mg/m3 to 58.7 mg/m3), hovering at the Swiss occupational exposure limit (49 mg/m3). Background air concentrations showed no presence of monoethanolamine, while the glycol ethers were often present, and formaldehyde was universally detected. Exposures were influenced by the amount of monoethanolamine in the cleaning product, cross ventilation and spraying. The collected data was used to test an already existing exposure modeling tool during the last phases of the study. The exposure estimation of the so called Bayesian tool converged with the measured range of exposure the more air concentrations of measured exposure were added. This was best described by an inverse 2nd order equation. The results suggest that the Bayesian tool is not adapted to predict low exposures. The Bayesian tool should be tested also with other datasets describing higher exposures. Low exposures to different chemical sensitizers and irritants should be further investigated to better understand the development of respiratory disorders in cleaning workers. Prevention measures should especially focus on incorrect use of cleaning products, to avoid high air concentrations at the exposure limits. - De récentes études montrent l'existence d'un lien entre l'exposition aux produits de nettoyages et les maladies respiratoires telles que l'asthme. En revanche, encore peu d'informations sont disponibles concernant la quantité d'exposition des professionnels du secteur du nettoyage aux composants organiques volatiles provenant des produits qu'ils utilisent. Pendant la première phase de cette étude, un recueil systématique des produits professionnels utilisés dans le secteur du nettoyage a été effectué. Les fiches de données de sécurité de ces produits ont ensuite été analysées, afin de répertorier les composés organiques volatiles les plus souvent utilisés. Il a été mis en évidence que les produits de nettoyage professionnels sont des mélanges complexes de composants chimiques (composants chimiques dans les produits de nettoyage : 3.5 ± 2.8). Ainsi, plus de 130 substances listées dans les fiches de données de sécurité ont été retrouvées dans les 105 produits répertoriés. Les principales classes de substances chimiques identifiées étaient les parfums, les éthers de glycol, les agents de surface et les solvants; dans une moindre mesure, les phosphates, les sels, les détergents, les régulateurs de pH, les acides et les bases ont été identifiés. Plus de 75% des produits répertoriés contenaient des substances décrites comme irritantes (Xi), 64% nuisibles (Xn) et 28% corrosives (C). Les risques pour les yeux (59%), la peau (50%) et par ingestion (60%) était les plus mentionnés. La monoéthanolamine, un fort irritant connu pour être impliqué dans les mécanismes de sensibilisation tels que les réactions allergiques, est fréquemment ajouté aux produits de nettoyage. L'analyse de la monoéthanolamine dans l'air a été habituellement difficile et les échantillons d'air ainsi que les méthodes d'analyse déjà disponibles étaient peu adaptées à l'évaluation de la concentration individuelle d'air aux postes de travail. Une nouvelle méthode plus efficace a donc été développée en captant les échantillons d'air sur des filtres de fibre de verre imprégnés, suivi par une étape de désorption, puis une Chromatographie des gaz et enfin une détection sélective des composants d'azote. Une évaluation de l'exposition des professionnels a été réalisée dans le secteur du nettoyage afin de déterminer la concentration atmosphérique en monoéthanolamine, en éthers de glycol et en alcool benzylique au cours des différentes tâches de nettoyage effectuées par les professionnels du nettoyage dans différentes entreprises, ainsi que pour déterminer les concentrations atmosphériques de fond en formaldéhyde, un polluant de l'air intérieur bien connu. L'étude de l'exposition professionnelle a été effectuée dans 12 compagnies de nettoyage et les échantillons d'air individuels ont été collectés pour l'éthanolamine (n=68), les éthers de glycol (n=79), l'alcool benzylique (n=15) et le formaldéhyde (n=45). Toutes les substances mesurées dans l'air, excepté le 2-butoxyéthanol, étaient en-dessous (<1/10) de la valeur moyenne d'exposition aux postes de travail en Suisse (8 heures), excepté pour le butoxypropanol et l'alcool benzylique, pour lesquels aucune valeur limite d'exposition n'était disponible. Bien que détecté qu'une seule fois, les concentrations d'air de 2-butoxyéthanol (n=4) étaient élevées (49,5 mg/m3 à 58,7 mg/m3), se situant au-dessus de la frontière des valeurs limites d'exposition aux postes de travail en Suisse (49 mg/m3). Les concentrations d'air de fond n'ont montré aucune présence de monoéthanolamine, alors que les éthers de glycol étaient souvent présents et les formaldéhydes quasiment toujours détectés. L'exposition des professionnels a été influencée par la quantité de monoéthanolamine présente dans les produits de nettoyage utilisés, par la ventilation extérieure et par l'emploie de sprays. Durant la dernière phase de l'étude, les informations collectées ont été utilisées pour tester un outil de modélisation de l'exposition déjà existant, l'outil de Bayesian. L'estimation de l'exposition de cet outil convergeait avec l'exposition mesurée. Cela a été le mieux décrit par une équation du second degré inversée. Les résultats suggèrent que l'outil de Bayesian n'est pas adapté pour mettre en évidence les taux d'expositions faibles. Cet outil devrait également être testé avec d'autres ensembles de données décrivant des taux d'expositions plus élevés. L'exposition répétée à des substances chimiques ayant des propriétés irritatives et sensibilisantes devrait être investiguée d'avantage, afin de mieux comprendre l'apparition de maladies respiratoires chez les professionnels du nettoyage. Des mesures de prévention devraient tout particulièrement être orientées sur l'utilisation correcte des produits de nettoyage, afin d'éviter les concentrations d'air élevées se situant à la valeur limite d'exposition acceptée.

Neurotoxicity of dibutyltin in aggregating brain cell cultures.

Dibutyltin (DBT) compounds are used primarily as stabilizers for polyvinyl chloride (PVC) plastics. Small quantities can be released from PVC containers into stored liquids. The neurotoxicological potential of DBT was tested in aggregating brain cell cultures after a 10-day treatment with concentrations ranging from 10(-10) to 10(-6)m, either during an early developmental period, or during a phase of advanced maturation. Changes in protein content, DNA labelling and cell type-specific enzyme activities were measured as end points. DBT caused general cytotoxicity at 10(-6)m in both immature and differentiated cultures. At 10(-7)m, it affected the myelin content and the cholinergic neurons in both states of maturation, while GABAergic neurons remained unchanged. Astrocyte and oligodendrocyte markers were diminished at 10(-7)m of DBT exclusively in immature cultures. DBT uptake by undifferentiated and differentiated cells was similar at this concentration. Whereas trimethyltin (TMT) is known to induce gliosis and triethyltin (TET) to cause demyelination and affect GABAergic neurons, DBT appeared to be more toxic than TMT, and to present a distinct toxicological pattern.

Estabilitzador de tensió, a partir d'una reactància de nucli saturable

Actualment hi ha una gran varietat de marques i models d'estabilitzadors de tensió, tot i que tots estan dissenyats i construïts amb el mateix propòsit, entregar una tensió estable a la sortida del dispositiu. La raó per la que es fabriquen estabilitzadors de tensió, es basa en el fet que, tot i amb els avenços tècnics i millores dels serveis de l'àrea energètica, no s'han pogut eliminar les freqüents caigudes o pujades de tensió en les xarxes d'alimentació d'energia elèctrica, fet que pot ocasionar errors en el funcionament dels equips electrònics. És per això que la majoria d'usuaris d'equips electrònics interposen un estabilitzador de tensió entre la línea d'alimentació dels seus aparells. L'objectiu del treball és realitzar la construcció d'un dispositiu de tres bobines amb un nucli ferromagnètic per a dur a terme la funció d'estabilitzador de tensió alterna. Mitjançant la tècnica de reluctància de nucli saturable i aplicant-la en aquest cas pràctic, es vol aconseguir desenvolupar un estabilitzador de tensió fiable i econòmic. Aquest treball ha d'aportar una solució en entorns de treball, entre altres, on s'utilitzen màquines d'alimentació alternes que siguin molt sensibles a les variacions de tensió de la xarxa i que, a més a més, no suposi una despesa molt elevada.

French summaries of product characteristics: content in relation to therapeutic monitoring of psychotropic drugs.

The prescription information (summary of product characteristics, SPC) is compiled by the pharmaceutical industry as required by the national regulatory authorities. They vary in their content about the properties of drugs and about the usefulness of therapeutic drug monitoring (TDM) in the blood of patients. Based on a previous study carried out in Germany, the degree of agreement of French SPC for 59 psychotropic drugs with the existing medico-scientific evidence in the area of TDM was examined using a recently developed instrument. A summary score of SPC content (SPCC) related to TDM (SPCC(TDM)) has been calculated and compared with the level of recommendation of TDM of the AGNP-TDM expert group consensus guidelines for TDM in psychiatry [AGNP: Arbeitsgemeinschaft für Neuropsychopharmakologie und Pharmakopsychiatrie (Association for neuropsychopharmacology and pharmacopsychiatry)]. Among the antidepressants, antipsychotics, tranquillizers/hypnotic agents and mood stabilizers, the highest SPCC(TDM) scores in the French SPC were reached for imipramine (16), haloperidol (6), clonazepam (8) and lithium (23), respectively. Results were similar to those obtained from the analysis of German SPC, and considerable disagreement was found between the information on TDM in SPC and existing medico-scientific evidence, albeit less in the case of mood stabilizers. Taking into account the recommendations of the AGNP-TDM expert group guidelines, there is a deficit in the French SPC concerning TDM-relevant information. An amelioration of this situation could help to improve the clinical practice of TDM of psychotropic drugs, as the SPC is a widely used tool.

Pharmacogenetic and clinical study on adverse effects induced by psychotropic drugs

Second-generation antipsychotics (SGAs) have become the first-line antipsychotic treatment for psychotic disorders due to their better overall tolerance compared to classical antipsychotics. However, metabolic side effects such as weight gain are frequently described during treatment with SGAs and/or other psychotropic drugs including some antidepressants and mood stabilizers, which may also result in poor adherence to treatment. The aim of this work was to investigate different methods to predict common side effects, in particular weight gain during treatment with weight gain inducing psychotropic drugs. Firstly, clinical data were used to determine the potential predictive power of a one month weight gain on weight increase after three and 12 months of treatment (n=351 patients). A fast and strong weight gain of >5% after a period of one month (>5%WG) was found to be the best predictor for an important weight gain at three (>15%) and 12 months (>20%). Similar analyses in an independent cohort of psychiatric adolescents (n=42), showed that a comparable >4% weight gain at one month is the best predictor for an important weight gain at three months (>15%). Secondly, we aimed to determine whether an extensive analysis of genes could be used, in addition to clinical factors, to predict patients at risk for >5%WG or for type 2 diabetes (T2D). Adding genetic markers to clinical variables to predict >5%WG increased significantly the area under the curve (AUC) of the analysis (AUCfinai:0.92, AUCdmicai:0.75, pcO.OOOl, n=248). Conversely, genetic risk scores were found to be associated with T2D (OR: 2.5, p=0.03, n=285) but without a significant increase of AUC'when compared to the prediction based to clinical factors alone. Finally, therapeutic drug monitoring was used to predict extrapyramidal symptoms during risperidone treatment (n=150). Active moiety (sum of risperidone and of its active metabolite 9- hydroxyrisperidone plasma concentrations) of >40 ng/ml should be targeted only in case of insufficient response. These results highlight different approaches for personalizing psychotropic treatments in order to reduce related side effects. Further research is needed, in particular on the identification of genetic markers, to improve the implementation of these results into clinical practice. Résumé Les antipsychotiques atypiques (APA) sont devenus le traitement antipsychotique de première intention pour le traitement des psychoses, grâce à un profil d'effets secondaires plus favorables comparé aux antipsychotiques typiques. Néanmoins, d'autres effets indésirables d'ordre métabolique (ex. prise pondérale) sont observés sous APA, stabilisateurs de l'humeur et/ou certains antidépresseurs, pouvant aussi limiter l'adhérence au traitement. L'objectif de ce travail est d'explorer différentes méthodes permettant de prédire des effets secondaires courants, en particulier la prise de poids durant un traitement avec des psychotropes pouvant induire un tel effet. Dans une première partie, des données cliniques ont été évaluées pour leurs potentiels prédictifs d'une prise de poids à un mois sur une prise de poids à trois et 12 mois de traitement (n=351 patients). Une prise de poids rapide et forte >5% à un mois (PP>5%) s'est avérée être le meilleur prédicteur pour une prise pondérale importante à trois (>15%) et 12 (>20%) mois de traitement. Des analyses similaires dans une cohorte pédiatrique (n=42) ont indiqué une prise de poids >4% à un mois comme le meilleur prédicteur pour une prise pondérale importante (>15%) à trois mois de traitement. Dans une deuxième partie, des marqueurs génétiques, en complément aux données cliniques, ont été analysés pour leur contribution potentielle à la prédiction d'une PP>5% et au dépistage du diabète de type 2 (DT2). L'ajout de variants génétiques aux données cliniques afin de prédire une PP>5% a augmenté significativement l'aire sous la courbe (ASC) de l'analyse (ASCflnai:0.92, ASCC|inique:0.75, p<0.0001, n=248). Concernant le DT2, un score génétique est associé au DT2 (OR: 2.5, p=0.03, n=285), néanmoins aucune augmentation significative de l'ASC n'a été observée par rapport à l'analyse avec les données cliniques seules. Finalement, des mesures de concentrations plasmatiques de médicaments ont été utilisées pour prédire la survenue de symptômes extrapyramidaux sous rispéridone (n=150). Cette analyse nous a permis d'établir qu'une concentration plasmatique de rispéridone associée à son métabolite actif >40 ng/ml ne devrait être recherchée qu'en cas de réponse clinique insuffisante. Ces différents résultats soulignent différentes approches pour personnaliser la prescription de psychotropes afin de réduire la survenue d'effets secondaires. Des études supplémentaires sont néanmoins nécessaires, en particulier sur l'identification de marqueurs génétiques, afin d'améliorer l'implémentation de ces résultats en pratique clinique. Résumé large publique Les antipsychotiques atypiques et autres traitements psychotropes sont couramment utilisés pour traiter les symptômes liés à la schizophrénie et aux troubles de l'humeur. Comme pour tout médicament, des effets secondaires sont observés. L'objectif de ce travail est d'explorer différentes méthodes qui permettraient de prédire la survenue de certains effets indésirables, en particulier une prise de poids et la survenue d'un diabète. Dans une première partie, nous avons évalué l'effet d'une prise de poids précoce sur une prise de poids au long terme sous traitement psychotrope. Les analyses ont mis en évidence dans une population psychiatrique qu'une prise de poids à un mois >5% par rapport au poids initial permettait de prédire une prise pondérale importante après trois (>15%) et 12 (>20%) mois de traitement. Un résultat semblable a. été observé dans un autre groupe de patients exclusivement pédiatriques. Dans une deuxième partie, nous avons évalué la contribution potentielle de marqueurs génétiques à la prédiction d'une prise pondérale de >5% après un mois de traitement ainsi que dans la survenue d'un diabète de type 2. Pour la prise de poids, la combinaison des données génétiques aux données cliniques a permis d'augmenter de 17% la précision de la prédiction, en passant de 70% à 87%. Concernant la survenue d'un diabète, les données génétiques n'ont pas amélioré la prédiction. Finalement, nous avons analysé la relation possible entre les concentrations sanguines d'un antipsychotique atypique couramment utilisé, la rispéridone, et la survenue d'effets secondaires (ici les tremblements). Il est ressorti de cette étude qu'une concentration plasmatique du médicament supérieure à 40 ng/ml ne devrait être dépassée qu'en cas de réponse thérapeutique insuffisante, au risque de voir augmenter la survenue d'effets secondaires du type tremblements. Ces résultats démontrent la possibilité de prédire avec une bonne précision la survenue de certains effets secondaires. Cependant, en particulier dans le domaine de la génétique, d'autres études sont nécessaires afin de confirmer les résultats obtenus dans nos analyses. Une fois cette étape franchie, il serait possible d'utiliser ces outils dans la pratique clinique. A terme, cela pourrait permettre au prescripteur de sélectionner les traitements les mieux adaptés aux profils spécifiques de chaque patient.

Possible new ways in the pharmacological treatment of bipolar disorder and comorbid alcoholism.

Possible new ways in the pharmacological treatment of bipolar disorder and comorbid alcoholism. Azorin JM, Bowden CL, Garay RP, Perugi G, Vieta E, Young AH. Source Department of Psychiatry, CHU Sainte Marguerite, Marseilles, France. Abstract About half of all bipolar patients have an alcohol abuse problem at some point of their lifetime. However, only one randomized, controlled trial of pharmacotherapy (valproate) in this patient population was published as of 2006. Therefore, we reviewed clinical trials in this indication of the last four years (using mood stabilizers, atypical antipsychotics, and other drugs). Priority was given to randomized trials, comparing drugs with placebo or active comparator. Published studies were found through systematic database search (PubMed, Scirus, EMBASE, Cochrane Library, Science Direct). In these last four years, the only randomized, clinically relevant study in bipolar patients with comorbid alcoholism is that of Brown and colleagues (2008) showing that quetiapine therapy decreased depressive symptoms in the early weeks of use, without modifying alcohol use. Several other open-label trials have been generally positive and support the efficacy and tolerability of agents from different classes in this patient population. Valproate efficacy to reduce excessive alcohol consumption in bipolar patients was confirmed and new controlled studies revealed its therapeutic benefit to prevent relapse in newly abstinent alcoholics and to improve alcohol hallucinosis. Topiramate deserves to be investigated in bipolar patients with comorbid alcoholism since this compound effectively improves physical health and quality of life of alcohol-dependent individuals. In conclusion, randomized, controlled research is still needed to provide guidelines for possible use of valproate and other agents in patients with a dual diagnosis of bipolar disorder and substance abuse or dependence.

A espectrometria atômica e a determinação de elementos metálicos em material polimérico

Polymeric materials are widely used in the chemical industry and are part of our daily lives. Inorganic species may be added to them as additives, anti-oxidizing agents, stabilizers, plasticizers, colorants and catalysts and may be present in a wide range of concentrations. Their determination demands the development of analytical methods considering different kinds of polymeric materials, their composition and the final use of the material. Although many different analytical techniques may be used, this review emphasizes those based on atomic absorption and emission spectrometry. Solid sampling techniques and digestion methods are described and discussed and compared considering published results.

Síntese e caracterização de beads acrílicos preparados por polimerização em suspensão visando aplicação como excipiente farmacêutico para compressão direta

One of the difficulties reported for the suspension polymerization is control the size and granulometry of beads. The purpose of this work was to evaluate the use of cellulose nanowhiskers and mesoporous silica as stabilizers to reduce the size and the particle distribution. To monitor polymerization process was used FTIR-ATR spectroscopy. The morphology was analyzed by scanning electron microscopy. The particle size distribution was characterised using a CILAS granulometer. Thermal stability was studied by thermogravimetric analysis. The results indicated that cellulose nanowhiskers may provide stabilization and increase the thermal stability of the beads in contrast to mesoporous silica.

Stability of Natural Colorants of Plant Origin

In recent years, there have been studies that show a correlation between the hyperactivity of children and use of artificial food additives, including colorants. This has, in part, led to preference of natural products over products with artificial additives. Consumers have also become more aware of health issues. Natural food colorants have many bioactive functions, mainly vitamin A activity of carotenoids and antioxidativity, and therefore they could be more easily accepted by the consumers. However, natural colorant compounds are usually unstable, which restricts their usage. Microencapsulation could be one way to enhance the stability of natural colorant compounds and thus enable better usage for them as food colorants. Microencapsulation is a term used for processes in which the active material is totally enveloped in a coating or capsule, and thus it is separated and protected from the surrounding environment. In addition to protection by the capsule, microencapsulation can also be used to modify solubility and other properties of the encapsulated material, for example, to incorporate fat-soluble compounds into aqueous matrices. The aim of this thesis work was to study the stability of two natural pigments, lutein (carotenoid) and betanin (betalain), and to determine possible ways to enhance their stability with different microencapsulation techniques. Another aim was the extraction of pigments without the use of organic solvents and the development of previously used extraction methods. Stability of pigments in microencapsulated pigment preparations and model foods containing these were studied by measuring the pigment content after storage in different conditions. Preliminary studies on the bioavailability of microencapsulated pigments and sensory evaluation for consumer acceptance of model foods containing microencapsulated pigments were also carried out. Enzyme-assisted oil extraction was used to extract lutein from marigold (Tagetes erecta) flower without organic solvents, and the yield was comparable to solvent extraction of lutein from the same flowers. The effects of temperature, extraction time, and beet:water ratio on extraction efficiency of betanin from red beet (Beta vulgaris) were studied and the optimal conditions for maximum yield and maximum betanin concentration were determined. In both cases, extraction at 40 °C was better than extraction at 80 °C and the extraction for five minutes was as efficient as 15 or 30 minutes. For maximum betanin yield, the beet:water ratio of 1:2 was better, with possibly repeated extraction, but for maximum betanin concentration, a ratio of 1:1 was better. Lutein was incorporated into oil-in-water (o/w) emulsions with a polar oil fraction from oat (Avena sativa) as an emulsifier and mixtures of guar gum and xanthan gum or locust bean gum and xanthan gum as stabilizers to retard creaming. The stability of lutein in these emulsions was quite good, with 77 to 91 percent of lutein being left after storage in the dark at 20 to 22°C for 10 weeks whereas in spray dried emulsions the retention of lutein was 67 to 75 percent. The retention of lutein in oil was also good at 85 percent. Betanin was incorporated into the inner w1 water phase of a water1-in-oil-inwater2 (w1/o/w2) double emulsion with primary w1/o emulsion droplet size of 0.34 μm and secondary w1/o/w2 emulsion droplet size of 5.5 μm and encapsulation efficiency of betanin of 89 percent. In vitro intestinal lipid digestion was performed on the double emulsion, and during the first two hours, coalescence of the inner water phase droplets was observed, and the sizes of the double emulsion droplets increased quickly because of aggregation. This period also corresponded to gradual release of betanin, with a final release of 35 percent. The double emulsion structure was retained throughout the three-hour experiment. Betanin was also spray dried and incorporated into model juices with different pH and dry matter content. Model juices were stored in the dark at -20, 4, 20–24 or 60 °C (accelerated test) for several months. Betanin degraded quite rapidly in all of the samples and higher temperature and a lower pH accelerated degradation. Stability of betanin was much better in the spray dried powder, with practically no degradation during six months of storage in the dark at 20 to 24 °C and good stability also for six months in the dark at 60 °C with 60 percent retention. Consumer acceptance of model juices colored with spray dried betanin was compared with similar model juices colored with anthocyanins or beet extract. Consumers preferred beet extract and anthocyanin colored model juices over juices colored with spray dried betanin. However, spray dried betanin did not impart any off-odors or off-flavors into the model juices contrary to the beet extract. In conclusion, this thesis describes novel solvent-free extraction and encapsulation processes for lutein and betanin from plant sources. Lutein showed good stability in oil and in o/w emulsions, but slightly inferior in spray dried emulsions. In vitro intestinal lipid digestion showed a good stability of w1/o/w2 double emulsion and quite high retention of betanin during digestion. Consumer acceptance of model juices colored with spray dried betanin was not as good as model juices colored with anthocyanins, but addition of betanin to real berry juice could produce better results with mixture of added betanin and natural berry anthocyanins could produce a more acceptable color. Overall, further studies are needed to obtain natural colorants with good stability for the use in food products.

Isolation of bovine plasma albumin by liquid chromatography and its polymerization for use in immunohematology

The aim of the method described here is to remove hemoglobin, the major contaminant in the bovine plasma obtained from slaughterhouses, by adding a mixture of 19% cold ethanol and 0.6% chloroform, followed by fibrinogen and globulin precipitation by the Cohn method and nonspecific hemagglutinin by thermocoagulation. The experimental volume of bovine plasma was 2,000 ml per batch. Final purification was performed by liquid chromatography using the ion-exchange gel DEAE-Sepharose FF. The bovine albumin thus obtained presented > or = 99% purity, a yield of 25.0 ± 1.2 g/l plasma and >71.5% recovery. N-acetyl-DL-tryptophan (0.04 mmol/g protein) and sodium caprylate (0.04 mmol/g protein) were used as stabilizers and the final concentration of albumin was adjusted to 22.0% (w/v), pH 7.2 to 7.3. Viral inactivation was performed by pasteurization for 10 h at 60°C. The bovine albumin for the hemagglutination tests used in immunohematology was submitted to chemical treatment with 0.06% (w/v) glutaraldehyde and 0.1% (w/v) formaldehyde at 37°C for 12 h to obtain polymerization. A change in molecular distribution was observed after this treatment, with average contents of 56.0% monomers, 23.6% dimers, 12.2% trimers and 8.2% polymers. The tests performed demonstrated that this polymerized albumin enhances the agglutination of Rho(D)-positive red cells by anti-Rho(D) serum, permitting and improving visualization of the results.

Effet d’une pré-sollicitation maximale isométrique des muscles stabilisateurs sur la coordination intermusculaire lors d’un exercice pluriarticulaire épuisant.

Introduction: Les stratégies d’optimisation de la performance chez les athlètes sont de plus en plus exploitées par les entraîneurs et préparateurs physiques. La potentialisation de post- activation (PAP) est reconnue comme étant un phénomène pouvant mener à une augmentation des performances. L’objectif de la présente étude était de donc décrire les effets d’une pré-sollicitation à la hanche sur la coordination inter-musculaire et la performance au cours d’un exercice épuisant. Méthodes: Six athlètes de patins de vitesse de courte piste (3 de sexe masculin et 3 de sexe féminin; âge: 20.2 ± 2.8 ans; moyenne±écart-type) ont exécuté aléatoirement un exercice qui consistait en 2 séries de 9 blocs de squats sautés maximaux, entre-coupés d’un squat isométrique d’une durée de 5 secondes sans pré-sollicitation préalable (CON) et avec une tâche de pré-sollicitation unilatérale de squat isométrique (EXP) contre une barre fixe de 2x3 secondes. Le pic de puissance moyen, l’amplitude et la fréquence moyenne d’EMG, et la vitesse et l’accélération angulaires des premiers et derniers blocs étaient enregistrés. Résultats: La pré-sollicitation isométrique maximale des membres inférieurs n’a pas amélioré de manière significative la performance de sauts et la coordination des muscles stabilisateurs à la hanche. La fréquence spectrale moyenne a néanmoins témoigné de l’implication de stratégies compensatoires du membre inférieur gauche en réponse à la fatigue. Conclusion: La pré-sollicitation des stabilisateurs à la hanche n’augmenterait pas la performance de squats répétés. Par contre, la fréquence moyenne du grand fessier et du tibial antérieur gauche ont suggéré meilleure résistance à la fatigue des muscles du membre inférieur non-dominant avec une pré-sollicitation. Les résultats de la présente étude indiquent donc la pertinence de considérer la pré-sollicitation dans un objectif de performance et de réadaptation sachant que l’asymétrie est omniprésente chez les athlètes et qu’elle est impliquée dans le taux élevé de blessures enregistré chez cette population.

Investigations on Eco-friendly Natural Insecticides

Instead of developing easily degradable, and low-priced insecticides, we are going after highly sophisticated chemicals. Here, an attempt is being made to develop safer formulations of insecticides of botanical origin. Different parts of the plants were chosen based on their use in countryside and villages The dried plant materials were extracted with petroleum ether, and were applied on Tribolium castaneum. The results were statistically analysed. The active principles from Croton tigilium and Leea sambucina, the most potential plants, were isolated using Column Chromatography, TLC, and Hydrolysis. The isolated principles were analysed spectroscopically ( UV-Vis., IR, NMR, and MS ) to identify their chemical nature. The active principles from Leea and Croton were identified as a cholisterate derivative and a phorbol derivative respectively. In order to ascertain the environmental combatibility of the principles, degradation by soil bacteria was studied. The isolated principles were made into three type of formulations using stabilizers .The formulations were applied on Snake gourd semilooper, Pulse beetle, and mosquito larvae. Also the biocidal activity of the formulations was studied. Both Leea derivative and Croton derivative could be formulated effectively and were effective against a variety of pests. They are eco-friendly, as there is no artificial chemicals involved.

Studies on polymer blends with special reference to NBR/PVC and CR/PVC blends

The study is undertaken on PVC blends because of their all-round importance-One of the most prominent needs of PVC in application end-use is permanent plasticizationlo. Butadiene-acrylonitrile rubber (NBR) has been utilized as permanent plasticizer for PVC since the 1940s for wire and cable insulation, food contact, and pondliners used for oil containment23'24. Also plasticized PVC has been added to vulcanizable nitrile rubber, to yield improved ozone, thermal ageing, and chemical resistance resulting in applications including fuel hose covers, gaskets, conveyor belt covers, and printing roll covers. This blend is miscible in the range of 23 to 45 per cent acrylonitrile content in the butadiene-acrylqnitrile copolymerzs. The first phase of the study was directed towards modification blends. These blends, in addition to the polymers, require a host of additives like curatives for the NBR phase and stabilizers for the PVC phase26of the existing PVC blends, especially NBR/PVC. The second phase of the study was directed towards the development of novel PVC based blends. Chloroprene rubber (polychloroprene) (CR) is structurally similar to PVC and hence is likely to form successful blends with PVC32.