Behavior of Socket Base Connections Emphasizing Pedestal Walls

To evaluate the main design models for socket base connections of precast concrete structures, an experimental investigation was carried out on specimens of this connection with smooth and rough interfaces in contact with cast-in-place concrete. The specimens consisted of pedestal walls and were submitted to loads with large eccentricities. Based on the experimental results, two rational design models are proposed for this connection. One of these models accounts for the friction and is applied to socket bases with smooth interfaces. The main behavior model was verified for sockets with this type of interface and the design of the longitudinal walls as corbels is also suggested in this case. Because the behavior of the rough interface specimens was very close to a monolithic connection, the other proposed model is an adaptation of the bending theory to calculate the vertical reinforcement of socket bases with rough interfaces.

Cigarette smoke inhalation modulates gene expression in sites of bone healing: a study in rats

Objective. The aim of this study was to assess the effect of cigarette smoke inhalation (CSI) on gene expression in alveolar bone healing sites. Study design. Wistar rats were randomly assigned to the groups: control [animals not exposed to CSI (n = 20)] and test [animals exposed to CSI, starting 3 days before teeth extraction and maintained until killing them (n = 20)]. First mandibular molars were bilaterally extracted, and the expression of alkaline phosphatase, bone morphogenetic protein (BMP) 2 and 7, receptor activator of nuclear factor kappa B ligand, osteoprotegerin, and d2 isoform of vacuolar adenosine triphosphatase V(o) domain were assessed by quantitative polymerase chain reaction in the newly formed tissue in the sockets. Results. Overall, data analysis demonstrated that CSI significantly affected the expression pattern of all of the studied genes except BMP-7. Conclusion. The expression of key genes for bone healing may be affected by CSI in tooth extraction sites. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2010;110:447-452)

Immunocytochemical detection of dentine matrix protein 1 in experimentally induced reactionary and reparative dentine in rat incisors

Objective: Although the general mechanisms of dentinogenesis are understood, several aspects regarding tertiary dentine formation still deserve investigation, especially regarding the presence and distribution of some noncollagenous matrix proteins. As dentine matrix protein 1 (DMP 1) is present in primary dentine, it is possible that this protein may also be present in the dentine matrix secreted after injury, but there are no immunocytochemical studies attempting its detection in tertiary dentine. The aim of this study was to examine the ultrastructural immunolocalization of DMP 1 in the tertiary dentine after extrusion of the rat incisor. Study design: Upper incisors were extruded 3 mm and then repositioned into their sockets. After several periods, the incisors were fixed and processed for transmission electron microscopy and for immunocytochemistry for DMP 1. Results: Extrusion yielded both types of tertiary dentine, which varied in aspect and related cells. DMP 1 was found in the mineralized matrix of all types of dentine, presenting high affinity for collagen, but rare colloidal gold particles over predentine. DMP 1 was evident in the supranuclear region and inside the nucleus of some odontoblast-like cells. Conclusion: The observed association between DMP 1 and collagen seem to be essential for reactionary and reparative dentine formation. (C) 2010 Elsevier Ltd. All rights reserved.

Propolis as storage media for avulsed teeth: microscopic and morphometric analysis in rats

The maintenance of the avulsed teeth in appropriate media for preserving the cellular viability has been important for repairing the periodontal ligament and preventing the root resorption after tooth reimplantation. Propolis is a substance capable of preserving cellular viability. This study aimed to analyze the propolis substance as a storage media for maintaining the avulsed teeth, besides to determine the ideal time period for keeping the tooth inside it. Thus, 60 maxillary right central incisors of rats were extracted and divided into five groups. In groups I and II, teeth were kept in propolis for 60 min and 6 h, respectively; in group III, teeth were kept in milk for 6 h; in group IV, teeth were kept dry for 60 min; and in group V, they were immediately reimplanted. All teeth had their root canals filled with calcium hydroxide paste. Following, teeth were reimplanted in their sockets. After 15 and 60 days, animals were killed and the obtained samples were processed in laboratory for microscopic and morphometric analyzing. The results showed that the occurrence of inflammatory resorption, dental ankylosis and the formation of the connective tissue parallel to the root surface were similar among groups. It could be verified a greater occurrence of replacement resorption in group IV when comparing to other groups. In groups I and IV, the presence of periodontal ligament-like connective tissue was substantially smaller than the other groups. Regarding to the cementum amount over the root, it could be observed that this was present in smaller amount in groups I and IV. Group II was similar to groups III and IV. Therefore, according to the results of this study, the use of propolis as a storage media for maintaining avulsed teeth could be highlighted, and the 6-h period was more appropriate than the 60-min period.

Clinical Concepts of Dry Socket

Dry socket is one of the most studied complications in dentistry, and a great number of studies have searched for an effective and safe method for its prevention and treatment. One of the great clinical challenges since the first case was reported has been the inconsistency and differences in the various definitions of dry socket and the criteria used for diagnosis. The pathophysiology, etiology, prevention, and treatment of dry socket are very important in the practice of oral surgery. The aim of the present report was to review and discuss each aspect. (C) 2010 American Association of Oral and Maxillofacial Surgeons J Oral Maxillofac Surg 68:1922-1932, 2010

Biomechanical and Microscopic Response of Bone to Titanium Implants in the Presence of Inorganic Grafts

This study evaluated the biomechanical and microscopic response of previously grafted bone to titanium implants. The lower incisors of 16 rabbits were surgically extracted, and bilateral perforations communicating with the remaining sockets were created distally. A socket/perforation defect on each mandible was chosen at random to be immediately filled with a xenogenic graft, whereas the contralateral perforation was left to heal naturally and served as a paired control. After 60 days, titanium implants were installed in the previously operated areas. After periods of 2 and 6 months, the animals were killed, and the force necessary to retrieve implants as well as the bone-implant contact (BIC) and bone mass (BM) were quantified and statistically compared by 2-way analysis of variance and Tukey`s test (alpha = .05). No significant differences in removal torque were observed, either by time or by treatment condition. Differences in BIC and BM between experimental and control groups were not statistically significant through the intervals studied (P < .05). The presence of a xenogenic graft did not influence the microscopic tissue response to titanium implants or fixation into newly formed or mature bone.

Efficacy of a bioactive glass-ceramic (Biosilicate (R)) in the maintenance of alveolar ridges and in osseointegration of titanium implants

Objectives The aims of this research were to evaluate the efficacy of a bioactive glass-ceramic (Biosilicate (R)) and a bioactive glass (Biogran (R)) placed in dental sockets in the maintenance of alveolar ridge and in the osseointegration of Ti implants. Material and methods Six dogs had their low premolars extracted and the sockets were implanted with Biosilicate (R), Biogran (R) particles, or left untreated. After the extractions, measurements of width and height on the alveolar ridge were taken. After 12 weeks a new surgery was performed to take the final ridge measurements and to insert bilaterally three Ti implants in biomaterial-implanted and control sites. Eight weeks post-Ti implant placement block biopsies were processed for histological and histomorphometric analysis. The percentages of bone-implant contact (BIC), of mineralized bone area between threads (BABT), and of mineralized bone area within the mirror area (BAMA) were determined. Results The presence of Biosilicate (R) or Biogran (R) particles preserved alveolar ridge height without affecting its width. No significant differences in terms of BIC, BAMA, and BABT values were detected among Biosilicate (R), Biogran (R), and the non-implanted group. Conclusions The results of the present study indicate that filling of sockets with either Biosilicate (R) or Biogran (R) particles preserves alveolar bone ridge height and allows osseointegration of Ti implants. To cite this article:Roriz VM, Rosa AL, Peitl O, Zanotto ED, Panzeri H, de Oliveira PT. Efficacy of a bioactive glass-ceramic (Biosilicate (R)) in the maintenance of alveolar ridges and in osseointegration of titanium implants.Clin. Oral Impl. Res. 21, 2010; 148-155.doi: 10.1111/j.1600-0501.2009.01812.x.

A smart layer for remote laboratories

Commonly, when a weblab is developed to support remote experiments in sciences and engineering courses, a particular hardware/software architecture is implemented. However, the existence of several technological solutions to implement those architectures difficults the emergence of a standard, both at hardware and software levels. While particular solutions are adopted assuming that only qualified people may implement a weblab, the control of the physical space and the power consumption are often forgotten. Since controlling these two previous aspects may increase the quality of the weblab hosting the remote experiments, this paper proposes the useof a new layer implemented by a domotic system bus with several devices (e.g. lights, power sockets, temperature sensors, and others) able to be controlled through the Internet. We also provide a brief proof-of-concept in the form of a weblab equipped with a simple domotic system usually implemented in smart houses. The added value to the remote experiment hosted at the weblab is also identified in terms of power savings and environment conditions.

Controlo e monitorização de um sistema de Auto-Pull

Esta dissertação descreve o estudo do controlo e da monitorização de um sistema de autopull, bem como o estudo da implementação de um destes sistemasnuma área de negócio. Inicialmente, de modo a percecionar as melhores opções a tomar para a realização deste projeto foram estudadas duas redes de comunicação locais, redes Ethernet e redes CAN, tendo-se optado pelas redes Ethernet, sendo as razões que determinaram esta escolha explanadas no desenvolvimento do relatório. Após ter sido selecionada a rede que foi utilizada, foram estudados os requisitos do sistema e procuradas no mercado soluções que os satisfaçam. Para a comunicação em tempo real foram utilizadas Web Sockets e para a utilização destas,foi necessário um servidor de Web Sockets, tendo a escolha recaídosobre onodejs. Posteriormente, foi elaborada uma interface gráfica que permitiu a criação de um sistema inteligente que auxilia os clientes do espaço a efetuarem pedidos bem como a chamarem os funcionários, não necessitando de passar os longos tempos de espera que normalmenteestão associados a estes espaços. Posto isto, foi realizado um website que deverá apresentar o espaço, os próximos eventos a realizar e outras informações importantes. Este sistema torna-se uma mais-valia para a divulgação da tecnologia implementada e para a divulgação dos espaços que eventualmente venham a adotar um sistema análogo. De seguida foi efetuado um plano de negócios, simulando um espaço físico que eventualmente implementasse esta tecnologia. Para tal, foi estudada a envolvente externa e interna em que este negócio estaria inserido, as políticas de marketing que deveriam ser seguidas e ainda um plano financeiro que descrevesse o investimento, as vendas esperadas e todos os restantes componentes económicos do projeto. Por último foram tecidas as principais conclusões inerentes ao projeto desenvolvido e analisadas as possibilidades de melhorias futuras.

Designing a modular, open and expandable Bluetooth-platform

Lähitulevaisuudessa langattomien järjestelmien kaupalliset mahdollisuudet tulevat olemaan valtavia. Tutkiaksemme tulevia tarpeita, tässä diplomityössä esitellään kuinka voidaan suunnitella ja toteuttaa avoin langaton asiakas-palvelin järjestelmä. Järjestelmänä päätettiin käyttää Bluetooth:ia. Tutkituista langattomista standardeista Bluetooth sopii parhaiten akkukäyttöiselle laitteelle, jonka tulee olla monipuolinen. Lisäksi Bluetooth:iin on liitetty suuria kaupallisia odotuksia ja yksi työn tavoitteista olikin tutkia, ovatko nämä odotukset realistisia. Bluetooth:iin havaittiin liittyvän paljon ylimainontaa ja, sen todettiin olevan monimutkainen. Sillä on kuitenkin paljon ominaisuuksia ja erilaisten käyttöprofiilien avulla sitä voidaan käyttää monenlaisiin tehtäviin. Suunniteltu järjestelmä ajaa socket-palvelinta Bluetooth-yhteyden päällä. Tietyntyyppiseen liikenteeseen erikoistuneet socket:t tarjoavat vaaditun laajennattavuuden. Palvelin toteutetiin Linux-säikeenä ja se hallitsee Bluetooth protokollapinoa sekä sovelluksia, joita suoritetaan palvelimella. Näiden sovelluksien palvelut ovat muiden käytössä Bluetooth:n kautta.

Evaluation of cardiovascular toxicity of carbon nanotubes functionalized with sodium hyaluronate in oral regenerative medicine

It has been demonstrated that carbon nanotubes (CNTs) associated with sodium hyaluronate (HY-CNTs) accelerate bone repair in the tooth sockets of rats. Before clinical application of HY-CNTs, it is important to assess their biocompatibility. Moreover, cardiac toxicity may be caused by the translocation of these particles to the blood stream. The aim of this study was to evaluate possible changes in cardiovascular function in male Wistar rats whose tooth sockets were treated with either CNTs or HY-CNTs (100 μg/mL, 0.1 mL). Blood pressure and heart rate were monitored in conscious rats 7 days after treatment. Cardiac function was evaluated using the Langendorff perfusion technique. The data showed no changes in blood pressure or heart rate in rats treated with either CNTs or HY-CNTs, and no significant changes in cardiac function were found in any of the groups. To confirm these findings, experiments were conducted in rats injected intraperitoneally with a high concentration of either CNTs or HY-CNTs (0.75 mg/kg). The same parameters were analyzed and similar results were observed. The results obtained 7 days following injection indicate that the administration of low concentrations of CNTs or HY-CNTs directly into tooth sockets did not cause any significant change in cardiovascular function in the rats. The present findings support the possibility of using these biocomposites in humans.

Letter - List of Surveying Equipment

Letter containing a handwritten list of prices for items such as tripods and sockets sent to Mr. S.D. Woodruff from Troughton and Simms of Fleet Street, London, England, Feb.23, 1846.

Echtzeitsimulation großer Grafikmodelle

Die vorliegende Arbeit entstand während meiner Zeit als wissenschaftlicher Mitarbeiter im Fachgebiet Technische Informatik an der Universität Kassel. Im Rahmen dieser Arbeit werden der Entwurf und die Implementierung eines Cluster-basierten verteilten Szenengraphen gezeigt. Bei der Implementierung des verteilten Szenengraphen wurde von der Entwicklung eines eigenen Szenengraphen abgesehen. Stattdessen wurde ein bereits vorhandener Szenengraph namens OpenSceneGraph als Basis für die Entwicklung des verteilten Szenengraphen verwendet. Im Rahmen dieser Arbeit wurde eine Clusterunterstützung in den vorliegenden OpenSceneGraph integriert. Bei der Erweiterung des OpenSceneGraphs wurde besonders darauf geachtet den vorliegenden Szenengraphen möglichst nicht zu verändern. Zusätzlich wurde nach Möglichkeit auf die Verwendung und Integration externer Clusterbasierten Softwarepakete verzichtet. Für die Verteilung des OpenSceneGraphs wurde auf Basis von Sockets eine eigene Kommunikationsschicht entwickelt und in den OpenSceneGraph integriert. Diese Kommunikationsschicht wurde verwendet um Sort-First- und Sort-Last-basierte Visualisierung dem OpenSceneGraph zur Verfügung zu stellen. Durch die Erweiterung des OpenScenGraphs um die Cluster-Unterstützung wurde eine Ansteuerung beliebiger Projektionssysteme wie z.B. einer CAVE ermöglicht. Für die Ansteuerung einer CAVE wurden mittels VRPN diverse Eingabegeräte sowie das Tracking in den OpenSceneGraph integriert. Durch die Anbindung der Geräte über VRPN können diese Eingabegeräte auch bei den anderen Cluster-Betriebsarten wie z.B. einer segmentierten Anzeige verwendet werden. Die Verteilung der Daten auf den Cluster wurde von dem Kern des OpenSceneGraphs separat gehalten. Damit kann eine beliebige OpenSceneGraph-basierte Anwendung jederzeit und ohne aufwendige Modifikationen auf einem Cluster ausgeführt werden. Dadurch ist der Anwender in seiner Applikationsentwicklung nicht behindert worden und muss nicht zwischen Cluster-basierten und Standalone-Anwendungen unterscheiden.

Skript Interprozesskommunikation

Das hier frei verfügbare Skript gehört zu einer gleichnamigen Vorlesung, die von Prof. Dr. Lutz Wegner bis zum Sommersemester 2007 gehalten wurde. Davor lief sie bis 1999 unter dem etwas irreführenden Titel „Ausgewählte Themen zu Rechnernetzen“. Behandelt wird die IPC in UNIX-basierten Rechnernetzen. Dazu gehören allgemeine Kenntnisse der Prozessumgebung, die fork- und exec-Systemaufrufe, Lock Files, Signale, Pipes, das Botschaftenkonzept (message queues), Semaphore, Shared Memory, Remote Procedure Calls, Sockets und Threads. Jedes Konzept wird mit kleinen Beispielen besprochen, die in C geschrieben sind. Der Quelltext liegt auf unseren Anlagen vor (für AIX, LINUX, Solaris). Grundlage der Vorlesung und des Skripts ist das ausgezeichnete Buch von John Shapley Gray „Interprocess Communications in UNIX“ aus dem Jahr 1998 bzw. die auf Linux angepasste Auflage desselben Buches „Interprocess Communications in LINUX“ aus dem Jahr 2003.

Comparison of white metal and resin socket terminations for wire ropes

Previously the authors have presented both theoretical and experimental work discussing the operating mechanism of a wire rope held in a tapered socket by means of a cast resin cone. The work reported here extends the investigation to address the question of whether the same socket fabricated with white metal operates in the same manner. To date, previous investigations have compared the operational efficiency of resin and white metal in terms of both strength and/or fatigue endurance. Some other work has analysed the operation of resin sockets or specific cast metal terminations. This paper seeks to draw the results from this work together, and, in addition to a theoretical analysis, presents experimental data obtained from a direct comparison of the operation mechanism for the same sockets filled with resin or white metal. Results show that white metal terminations have a very different distribution of stresses along the length of the socket basket from resin terminations, and a smaller but still significant amount of socket draw. For both types of termination the socket draw develops high frictional gripping forces which can transfer the load from the rope to the socket. The different stress distributions mean that the consequences of termination fabrication defects may not be the same for resin and white metal terminations.