Inter- and intra- project knowledge transfer : analysis of knowledge transfer techniques

Many studies in the area of project management and social networks have identified the significance of project knowledge transfer within and between projects. However, only few studies have examined the intra- and inter-projects knowledge transfer activities. Knowledge in projects can be transferred via face-to-face interactions on the one hand, and via IT-based tools on the other. Although companies have allocated many resources to the IT tools, it has been found that they are not always effectively utilised, and people prefer to look for knowledge using social face-to-face interactions. This paper explores how to effectively leverage two alternative knowledge transfer techniques, face-to-face and IT-based tools to facilitate knowledge transfer and enhance knowledge creation for intra- and inter-project knowledge transfer. The paper extends the previous research on the relationships between and within teams by examining the project’s external and internal knowledge networks concurrently. Social network qualitative analysis, using a case study within a small-medium enterprise, was used to examine the knowledge transfer activities within and between projects, and to investigate knowledge transfer techniques. This paper demonstrates the significance of overlapping employees working simultaneously on two or more projects and their impact on facilitating knowledge transfer between projects within a small/medium organisation. This research is also crucial to gaining better understanding of different knowledge transfer techniques used for intra- and inter-project knowledge exchange. The research provides recommendations on how to achieve better knowledge transfer within and between projects in order to fully utilise a project’s knowledge and achieve better project performance.

Towards the implementation of vision-based UAS sense-and-avoid

Machine vision represents a particularly attractive solution for sensing and detecting potential collision-course targets due to the relatively low cost, size, weight, and power requirements of the sensors involved. This paper describes the development of detection algorithms and the evaluation of a real-time flight ready hardware implementation of a vision-based collision detection system suitable for fixed-wing small/medium size UAS. In particular, this paper demonstrates the use of Hidden Markov filter to track and estimate the elevation (β) and bearing (α) of the target, compares several candidate graphic processing hardware choices, and proposes an image based visual servoing approach to achieve collision avoidance

Measuring export readiness using a multiple-item index

Since the 1970s the internationalisation process of firms has attracted wide research interest. One of the dominant explanations of firm internationalisation resulting from this research activity is the Uppsala stages model. In this paper, a pre-internationalisation phase is incorporated into the traditional Uppsala model to address the question: What are the antecedents of this model? Four concepts are proposed as the key components that define the experiential learning process underlying a firm’s pre-export phase: export stimuli, attitudinal/psychological commitment, resources and lateral rigidity. Through a survey of 290 Australian exporting and non-exporting small-medium sized firms, data relating to the four pre-internationalisation concepts is collected and an Export Readiness Index (ERI) is constructed through factor analysis. Using logistic regression, the ERI is tested as a tool for analysing export readiness among Australian SMEs.

Next generation low-cost motion capture systems can provide comparable spatial accuracy to high-end systems

The objective quantification of three-dimensional kinematics during different functional and occupational tasks is now more in demand than ever. The introduction of new generation of low-cost passive motion capture systems from a number of manufacturers has made this technology accessible for teaching, clinical practice and in small/medium industry. Despite the attractive nature of these systems, their accuracy remains unproved in independent tests. We assessed static linear accuracy, dynamic linear accuracy and compared gait kinematics from a Vicon MX20 system to a Natural Point OptiTrack system. In all experiments data were sampled simultaneously. We identified both systems perform excellently in linear accuracy tests with absolute errors not exceeding 1%. In gait data there was again strong agreement between the two systems in sagittal and coronal plane kinematics. Transverse plane kinematics differed by up to 3 at the knee and hip, which we attributed to the impact of soft tissue artifact accelerations on the data. We suggest that low-cost systems are comparably accurate to their high-end competitors and offer a platform with accuracy acceptable in research for laboratories with a limited budget.

SOA for business networks - service delivery framework

The next generation of SOA needs to scale for flexible service consumption, beyond organizational boundaries and current B2B applications, into communities, eco-systems, and business networks. In the wider and, ultimately, global settings, new capabilities are needed so that business partners can efficiently and reliably enable, adapt, and expose services where they can be discovered, ordered, consumed, metered, and paid for, through new applications and opportunities, driven by third parties in the global "village". This trend is already underway, in different ways, through various early adopter market segments. For the small medium enterprises segment, Google, Intuit-Microsoft, and others have launched appstores, through which an open-ended array of hosted applications are sourced from the development community and procured as maketplace commondities. In the corporate sector, the marketplace model and business network hubs are being put in place on top of connectivity and network orchestration investments for capitalizing services as tradable assets, seen in banking/finance (e.g. American Express Intelligent Marketplace), logistics (e.g., the E2open hub), and the public sector (e.g., UK DirectGov whole-of-government citizen services delivery).

Developing a predictive contractor satisfaction model (CoSMo) for construction projects

Over the last few decades, construction project performance has been evaluated due to the increase of delays, cost overruns and quality failures. Growing numbers of disputes, inharmonious working environments, conflict, blame cultures, and mismatches of objectives among project teams have been found to be contributory factors to poor project performance. Performance measurement (PM) approaches have been developed to overcome these issues, however, the comprehensiveness of PM as an overall approach is still criticised in terms of the iron triangle; namely time, cost, and quality. PM has primarily focused on objective measures, however, continuous improvement requires the inclusion of subjective measures, particularly contractor satisfaction (Co-S). It is challenging to deal with the two different groups of large and small-medium contractor satisfaction as to date, Co-S has not been extensively defined, primarily in developing countries such as Malaysia. Therefore, a Co-S model is developed in this research which aims to fulfil the current needs in the construction industry by integrating performance measures to address large and small-medium contractor perceptions. The positivist paradigm used in the research was adhered to by reviewing relevant literature and evaluating expert discussions on the research topic. It yielded a basis for the contractor satisfaction model (CoSMo) development which consists of three elements: contractor satisfaction (Co-S) dimensions; contributory factors and characteristics (project and participant). Using valid questionnaire results from 136 contractors in Malaysia lead to the prediction of several key factors of contractor satisfaction and to an examination of the relationships between elements. The relationships were examined through a series of sequential statistical analyses, namely correlation, one-way analysis of variance (ANOVA), t-tests and multiple regression analysis (MRA). Forward and backward MRAs were used to develop Co-S mathematical models. Sixteen Co-S models were developed for both large and small-medium contractors. These determined that the large contractor Malaysian Co-S was most affected by the conciseness of project scope and quality of the project brief. Contrastingly, Co-S for small-medium contractors was strongly affected by the efficiency of risk control in a project. The results of the research provide empirical evidence in support of the notion that appropriate communication systems in projects negatively contributes to large Co-S with respect to cost and profitability. The uniqueness of several Co-S predictors was also identified through a series of analyses on small-medium contractors. These contractors appear to be less satisfied than large contractors when participants lack effectiveness in timely authoritative decision-making and communication between project team members. Interestingly, the empirical results show that effective project health and safety measures are influencing factors in satisfying both large and small-medium contractors. The perspectives of large and small-medium contractors in respect to the performance of the entire project development were derived from the Co-S models. These were statistically validated and refined before a new Co-S model was developed. Developing such a unique model has the potential to increase project value and benefit all project participants. It is important to improve participant collaboration as it leads to better project performance. This study may encourage key project participants; such as client, consultant, subcontractor and supplier; to increase their attention to contractor needs in the development of a project. Recommendations for future research include investigating other participants‟ perspectives on CoSMo and the impact of the implementation of CoSMo in a project, since this study is focused purely on the contractor perspective.

Understanding the pre-internationalization phase decision heuristic of Australian SMEs

Since the 1970s, the Uppsala stages model has been one of the dominant explanations of firm internationalization. The model's focus on internationalization as a firm's gradual and incremental process of increasing international involvement has attracted much debate, with one criticism being that it is unclear in explaining how the internationalization process first originates within a firm. In this paper, the Uppsala model is extended through the incorporation of a pre-internationalization phase to explore the antecedents of firm internationalization. Adopting the Uppsala model's theoretical underpinnings, this paper develops and operationalizes a pre-internationalization phase decision heuristic in the form of an ‘export readiness index'. Four constructs are proposed that drive and inhibit export commencement decision-making during a firm's preinternationalization phase: export stimuli, attitudinal/psychological commitment, resources and lateral rigidity. Through a survey of Australian exporting and non-exporting small-medium sized enterprises (SMEs), the Export Readiness Index (ERI) is developed through factor analysis and tested using logistic regression. Results of the study and their potential implications are discussed.

Causes of rigidity in SMEs' export commencement decision

Today, small-medium sized enterprises (SMEs) collectively contribute to the largest percentage of job creation in OECD countries. SMEs have become increasingly international since the turn of the century despite being smaller in size in comparison to large multinational firms, and notably, exporting is the most favoured mode of international market entry utilised by SMEs in their internationalisation strategy. Governments around the world have acknowledged the importance of export promotion and have employed policies that are targeted at increasing the export activity of SMEs. However, in many countries, the involvement of SMEs in export operations remains rather low. Within Australia, for example, only about one-third of local SMEs are exporting and this raises an important question as to why there is such a huge percentage of non-exporters. Much scholarly research that focuses on this problem has concentrated on the broad concept of 'export barriers' that act as obstacles to a firm's export development. This paper takes a different approach to previous studies and proposes that a firm's resistance to commence exporting can be better understood through an analysis of the behavioural decision process during its pre-export state. Using a sample of Australian SMEs, the factors that are important in preventing a firm’s initial export commencement decision are categorised and discussed through the use of factor analysis.

The role of marketing in today's enterprises

Purpose The purpose of this paper is to explore the role of marketing in today's enterprises and examines the antecedents of the marketing department's influence and its relationship with market orientation and firm performance. Design/methodology/approach Data were collected from the West (i.e. the USA and Europe) and the East (i.e. Asia). Partial least squares (PLS) was used to estimate structural models. Findings The findings support the idea that a strong and influential marketing department contributes positively to firm performance. This finding holds for Western and Asian, and for small/medium and large firms alike. Second, the marketing department's influence in a firm depends more on its responsibilities and resources, and less on internal contingency factors (i.e. a firm's competitive strategy or institutional attributes). Third, a marketing department's influence in the West affects firm performance both directly and indirectly (via market orientation). In contrast, this relationship is fully mediated among Eastern firms. Fourth, low-cost strategies enhance the influence of a firm's marketing department in the East, but not in the West. Research limitations/implications The paper assumes explicitly that a marketing department's influence is an antecedent of its market orientation. While the paper finds support for this link, the paper did not test for dual causality between the constructs. Originality/value Countering the frequent claim in anecdotal and journalistic work that the role of the marketing department diminishes, the findings show that across different geographic regions and firm sizes, strong marketing departments improve firm performance (especially in the marketing-savvy West), and that they should continue to play an important role in firms.

Nintendo Wii Fit as an adjunct to physiotherapy following lower limb fractures: Preliminary feasibility, safety and sample size considerations

Objective The Nintendo Wii Fit integrates virtual gaming with body movement, and may be suitable as an adjunct to conventional physiotherapy following lower limb fractures. This study examined the feasibility and safety of using the Wii Fit as an adjunct to outpatient physiotherapy following lower limb fractures, and reports sample size considerations for an appropriately powered randomised trial. Methodology Ambulatory patients receiving physiotherapy following a lower limb fracture participated in this study (n = 18). All participants received usual care (individual physiotherapy). The first nine participants also used the Wii Fit under the supervision of their treating clinician as an adjunct to usual care. Adverse events, fracture malunion or exacerbation of symptoms were recorded. Pain, balance and patient-reported function were assessed at baseline and discharge from physiotherapy. Results No adverse events were attributed to either the usual care physiotherapy or Wii Fit intervention for any patient. Overall, 15 (83%) participants completed both assessments and interventions as scheduled. For 80% power in a clinical trial, the number of complete datasets required in each group to detect a small, medium or large effect of the Wii Fit at a post-intervention assessment was calculated at 175, 63 and 25, respectively. Conclusions The Nintendo Wii Fit was safe and feasible as an adjunct to ambulatory physiotherapy in this sample. When considering a likely small effect size and the 17% dropout rate observed in this study, 211 participants would be required in each clinical trial group. A larger effect size or multiple repeated measures design would require fewer participants.

Cost Sharing Mechanisms for Business Clusters with Strategic Firms

A business cluster is a co-located group of micro, small, medium scale enterprises. Such firms can benefit significantly from their co-location through shared infrastructure and shared services. Cost sharing becomes an important issue in such sharing arrangements especially when the firms exhibit strategic behavior. There are many cost sharing methods and mechanisms proposed in the literature based on game theoretic foundations. These mechanisms satisfy a variety of efficiency and fairness properties such as allocative efficiency, budget balance, individual rationality, consumer sovereignty, strategyproofness, and group strategyproofness. In this paper, we motivate the problem of cost sharing in a business cluster with strategic firms and illustrate different cost sharing mechanisms through the example of a cluster of firms sharing a logistics service. Next we look into the problem of a business cluster sharing ICT (information and communication technologies) infrastructure and explore the use of cost sharing mechanisms.

Assimilation of endmember variability in spectral for urban land cover extraction mixture analysis

Variable Endmember Constrained Least Square (VECLS) technique is proposed to account endmember variability in the linear mixture model by incorporating the variance for each class, the signals of which varies from pixel to pixel due to change in urban land cover (LC) structures. VECLS is first tested with a computer simulated three class endmember considering four bands having small, medium and large variability with three different spatial resolutions. The technique is next validated with real datasets of IKONOS, Landsat ETM+ and MODIS. The results show that correlation between actual and estimated proportion is higher by an average of 0.25 for the artificial datasets compared to a situation where variability is not considered. With IKONOS, Landsat ETM+ and MODIS data, the average correlation increased by 0.15 for 2 and 3 classes and by 0.19 for 4 classes, when compared to single endmember per class. (C) 2013 COSPAR. Published by Elsevier Ltd. All rights reserved.

A produção do conhecimento socialmente robusto no contexto da educação e do trabalho: inserção de moradores em comunidades do Rio de Janeiro no mercado de trabalho formal

O presente trabalho tem por objetivo analisar o processo de inserção de pessoas de baixa renda moradoras em comunidades do Rio de Janeiro no mercado de trabalho formal, alunos e egressos dos cursos da Educação Profissional oferecidos no âmbito do Programa SESI Cidadania (PSC), implantado pela Federação das Indústrias do Rio de Janeiro (FIRJAN), em 12 de agosto de 2010, por meio do acordo de cooperação com o Governo do Estado do Rio de Janeiro. O objetivo do programa é levar projetos sociais para as comunidades com Unidade de Polícia Pacificadora (UPP); dentre eles, projetos educacionais com oferta gratuita de cursos na modalidade Qualificação Profissional, respaldada no Decreto n 6.635, de 5 de novembro de 2008. Por conseguinte, este estudo visa a propor iniciativas no sentido de facilitar o ingresso e a permanência dessas pessoas no mercado de trabalho formal e a geração de trabalho e renda. A experiência da autora com processos de inserção de alunos e egressos de cursos da Educação Profissional oferecidos pelo Programa SESI Cidadania sinaliza que as dificuldades enfrentadas por moradores das comunidades do Rio de Janeiro estão relacionadas às condições históricas, sociais, econômicas e culturais. Diante dessa problemática, adotamos a seguinte hipótese: as competências comportamentais, dos moradores das comunidades do Rio de Janeiro interferem na sua inserção no mercado de trabalho formal. Nesse aspecto, o foco de investigação foi verificar as competências observadas pelos profissionais de recursos humanos que interferem na inserção e permanência desses egressos nas empresas. Adotamos o conceito de competências entendido por Joel Souza Dutra (2001) bem como por alguns teóricos da Administração, que o definem como um conjunto de conhecimentos, habilidades e atitudes necessárias para que a pessoa desenvolva suas atribuições e responsabilidades. O recorte empírico se constituiu de dez empresas de pequeno, médio e grande porte sediadas na Região Metropolitana do Rio de Janeiro. A abordagem metodológica incluiu pesquisa de campo com base em dados de entrevistas semiestruturadas, sendo incorporada a técnica de análise de relato verbal. Formulamos um questionário para realização de entrevistas semidirigidas com profissionais de Recursos Humanos e dirigentes de empresas as quais nos permitiram identificar os fatores que interferem na inserção dessas pessoas no mercado de trabalho formal. As conclusões apontam dificuldades de inserção e permanência de moradores das comunidades do Rio de Janeiro no mercado de trabalho formal por aspectos relacionados à formação educacional básica, e sobretudo a competências comportamentais desenvolvidas no contexto sociocultural no qual estão inseridos, as quais se encontram desassociadas das competências comportamentais demandadas pelo mercado de trabalho formal. A relevância da pesquisa consiste na possibilidade de subsidiar a formulação de políticas públicas da Educação e do trabalho destinadas à formação profissional de pessoas de baixa renda moradoras das comunidades do Rio de Janeiro para geração de trabalho e renda.

Temporal and Spatial Distribution of Finfish Bycatch in the U.S. Atlantic Bottom Longline Shark Fishery

Bycatch in U.S. fisheries has become an increasingly important issue to both fisheries managers and the public, owing to the wide range of marine resources that can be involved. From 2002 to 2006, the Commercial Shark Fishery Observer Program (CSFOP) and the Shark Bottom Longline Observer Program (SBLOP) collected data on catch and bycatch caught on randomly selected vessels of the U.S. Atlantic shark bottom longline fishery. Three subregions (eastern Gulf of Mexico, South Atlantic, Mid-Atlantic Bight), five years (2002–06), four hook types (small, medium, large, and other), seven depth ranges (<50 m to >300 m), and eight broad taxonomic categories (e.g. Selachimorpha, Batoidea, Serranidae, etc.) were used in the analyses. Results indicated that the majority of bycatch (number) was caught in the eastern Gulf of Mexico and that the Selachimorpha taxon category made up over 90% of the total bycatch. The factors year followed by depth were the most common significant factors affecting bycatch.

Socio-economic conditions of the pond owners of Demra, Dhaka

On the basis of fish culture status 96 ponds of the study area were classified into 4 categories like wild stock (27%), extensive culture (24%), improved extensive culture (33%) and semi-intensive culture (16%). Percentage of small, medium and large ponds were 38, 44, and 18 respectively whereas education levels below SSC, below Bachelor and above were 43, 38 and 19 respectively and single owners belonged to 54% of the ponds. Per hectare yields of extensive, improved extensive and semi-intensive categories of culture were 1.3, 2.12 and 4.0 metric tons respectively and their net return were 46, 63 and 92 thousand taka respectively. Considering the problems of fish culture, multiple ownership was found to be the most important one.