Computer generated hologram from point cloud using graphics processor

Computer generated holography is an extremely demanding and complex task when it comes to providing realistic reconstructions with full parallax, occlusion, and shadowing. We present an algorithm designed for data-parallel computing on modern graphics processing units to alleviate the computational burden. We apply Gaussian interpolation to create a continuous surface representation from discrete input object points. The algorithm maintains a potential occluder list for each individual hologram plane sample to keep the number of visibility tests to a minimum.We experimented with two approximations that simplify and accelerate occlusion computation. It is observed that letting several neighboring hologramplane samples share visibility information on object points leads to significantly faster computation without causing noticeable artifacts in the reconstructed images. Computing a reduced sample set via nonuniform sampling is also found to be an effective acceleration technique. © 2009 Optical Society of America.

Self-aligned electrodes for suspended carbon nanotube structures

We report on a study into electrode fabrication for the gate control of carbon nanotubes partially suspended above an oxidised silicon substrate. A fabrication technique has been developed that allows self-aligned side-gate electrodes to be placed with respect to an individual nanotube with a spacing of less than 10 nm. The suspended multi-walled carbon nanotube (MWCNT) is used as an evaporation mask during metal deposition. The metal forms an island on the nanotube, with increasing width as the metal is deposited, forming a wedge shape, so that even thick deposited layers yield islands that remain separated from the metal deposited on the substrate due to shadowing of the evaporation. The island can be removed during lift-off to leave a set of self-aligned electrodes on the substrate. Results show that Cr yields self-aligned side gates with around 90% effectiveness. © 2003 Elsevier Science B.V. All rights reserved.

Structural and optical properties of nanostructured TiO2 thin films fabricated by glancing angle deposition

TiO2 films deposited by electron beam evaporation with glancing angle deposition (GLAD) technique were reported. The influence of flux angle on the surface morphology and the microstructure was investigated by scanning electron microscopy. The GLAD TiO2 films are anisotropy with highly orientated nanostructure of the slanted columns. With the increase of flux angle, refractive index and packing density decrease. This is caused by the shadowing effect dominating film growth. The anisotropic structure of TiO2 films results in optical birefringence, which reaches its maximum at the flux angle alpha = 65 degrees. The maximum birefringence of GLAD TiO2 films is higher than that of common bulk materials. It is suggested that glancing angle deposition may offer an effective method to obtain tailorable refractive index and birefringence in a large continuous range. (c) 2006 Elsevier B.V. All rights reserved.

The effect of diffusion and overhangs/vacancies on the microstructure of zig-zag thin film

Basing on some growth models of thin film, we have investigated the growth mechanism of glancing angle deposition (GLAD) film. The simulation verifies that the overhangs/vacancies also contribute to the columnar growth as well as the self-shadowing effect for GLAD thin film. Besides, we have studied the effect of the deposition rate, surface and bulk diffusions on the microstructure of thin film using the time-dependent Monte Carlo method. The results show that the surface and bulk diffusions can significantly enhance the packing density of thin film in GLAD growth, and the increase of the deposition rate induce the moderate decrease of the packing density. (c) 2006 Elsevier B.V. All rights reserved.

Preparation and characterization of nanostructured ZrO2 thin films by glancing angle deposition

ZrO2 films were prepared by electron beam evaporation with glancing angle deposition (GLAD) technique. The as-deposition and annealed ZrO2 films are all amorphous, different from that deposited at normal incidence. Due to the shadowing effect, a highly orientated structure composed of slanted columns formed, and the obtained films became the mixture of slanted columns and voids. The relationship among the effective refractive index, packing density and flux incident angle was investigated. The refractive index and packing density of ZrO2 films decrease with the increase of the incident angle. The in-plane birefringence of GLAD ZrO2 films was calculated. At the packing density of 0.576, the maximum birefringence is 0.037. (c) 2006 Elsevier B.V. All rights reserved.

Análise de desempenho do protocolo TCP em Redes LTE.

O crescimento dos serviços de banda-larga em redes de comunicações móveis tem provocado uma demanda por dados cada vez mais rápidos e de qualidade. A tecnologia de redes móveis chamada LTE (Long Term Evolution) ou quarta geração (4G) surgiu com o objetivo de atender esta demanda por acesso sem fio a serviços, como acesso à Internet, jogos online, VoIP e vídeo conferência. O LTE faz parte das especificações do 3GPP releases 8 e 9, operando numa rede totalmente IP, provendo taxas de transmissão superiores a 100 Mbps (DL), 50 Mbps (UL), baixa latência (10 ms) e compatibilidade com as versões anteriores de redes móveis, 2G (GSM/EDGE) e 3G (UMTS/HSPA). O protocolo TCP desenvolvido para operar em redes cabeadas, apresenta baixo desempenho sobre canais sem fio, como redes móveis celulares, devido principalmente às características de desvanecimento seletivo, sombreamento e às altas taxas de erros provenientes da interface aérea. Como todas as perdas são interpretadas como causadas por congestionamento, o desempenho do protocolo é ruim. O objetivo desta dissertação é avaliar o desempenho de vários tipos de protocolo TCP através de simulações, sob a influência de interferência nos canais entre o terminal móvel (UE User Equipment) e um servidor remoto. Para isto utilizou-se o software NS3 (Network Simulator versão 3) e os protocolos TCP Westwood Plus, New Reno, Reno e Tahoe. Os resultados obtidos nos testes mostram que o protocolo TCP Westwood Plus possui um desempenho melhor que os outros. Os protocolos TCP New Reno e Reno tiveram desempenho muito semelhante devido ao modelo de interferência utilizada ter uma distribuição uniforme e, com isso, a possibilidade de perdas de bits consecutivos é baixa em uma mesma janela de transmissão. O TCP Tahoe, como era de se esperar, apresentou o pior desempenho dentre todos, pois o mesmo não possui o mecanismo de fast recovery e sua janela de congestionamento volta sempre para um segmento após o timeout. Observou-se ainda que o atraso tem grande importância no desempenho dos protocolos TCP, mas até do que a largura de banda dos links de acesso e de backbone, uma vez que, no cenário testado, o gargalo estava presente na interface aérea. As simulações com erros na interface aérea, introduzido com o script de fading (desvanecimento) do NS3, mostraram que o modo RLC AM (com reconhecimento) tem um desempenho melhor para aplicações de transferência de arquivos em ambientes ruidosos do que o modo RLC UM sem reconhecimento.

EPITAXIAL CRYSTALLIZATION OF HDPE ON IPP IN HDPE/IPP BLENDS

Unique crystalline morphologies of solution-cast films of HDPE/iPP blends were investigated by means of transmission electron microscopy (TEM), electron diffraction, metal shadowing and specimen-tilt techniques. The unique morphologies come from an epitaxial crystallization of HDPE on iPP. The contact planes of the two kinds of crystals are (100) of HDPE and (010) of iPP, while the intercrossing angle between their chain axes is about 50-degrees. The HDPE existed with different crystalline morphologies in the two kinds of crystalline regions of iPP spherulites, i.e. cross-hatched and single-crystal-type structures. Based on structural analysis, two models of epitaxial growth of HDPE on iPP are proposed.

Second-Order Training of Adaptive Critics for Online Process Control

A new algorithm for training of nonlinear optimal neuro-controllers (in the form of the model-free, action-dependent, adaptive critic paradigm). Overcomes problems with existing stochastic backpropagation training: need for data storage, parameter shadowing and poor convergence, offering significant benefits for online applications.

Empirical performance of RSSI-based Monte Carlo localisation for active RFID patient tracking systems

The range of potential applications for indoor and campus based personnel localisation has led researchers to create a wide spectrum of different algorithmic approaches and systems. However, the majority of the proposed systems overlook the unique radio environment presented by the human body leading to systematic errors and inaccuracies when deployed in this context. In this paper RSSI-based Monte Carlo Localisation was implemented using commercial 868 MHz off the shelf hardware and empirical data was gathered across a relatively large number of scenarios within a single indoor office environment. This data showed that the body shadowing effect caused by the human body introduced path skew into location estimates. It was also shown that, by using two body-worn nodes in concert, the effect of body shadowing can be mitigated by averaging the estimated position of the two nodes worn on either side of the body. © Springer Science+Business Media, LLC 2012.

Received signal characteristics of outdoor body-to-body communications channels at 2.45 GHz

In this paper we conduct a number of experiments to assess the impact of typical human body movements on the signal characteristics of outdoor body-to-body communications channels using flexible patch antennas. A modified log-distance path loss model which accounts for body shadowing and signal fading due to small movements is used to model the measured data. For line of sight channels, in which both ends of the body-to-body link are stationary, the path loss exponent is close to that for free space, although the received signal is noticeably affected by involuntary or physiological-related movements of both persons. When one person moves to obstruct the direct signal path between nodes, attenuation by the person's body can be as great as 40 dB, with even greater variation observed due to fading. The effects of movements such as rotation, tilt, walking in line of sight and non-line of sight on body-to-body communications channels are also investigated in this study. © 2011 IEEE.

How Prepared are UK Medical Graduates for Practice? Final report from a programme of research commissioned by the General Medical Council

This programme of research aimed to understand the extent to which current UK medical graduates are prepared for practice. Commissioned by the General Medical Council, we conducted: (1) A Rapid Review of the literature between 2009 and 2013; (2) narrative interviews with a range of stakeholders; and (3) longitudinal audio-diaries with Foundation Year 1 doctors. The Rapid Review (RR) resulted in data from 81 manuscripts being extracted and mapped against a coding framework (including outcomes from Tomorrow's Doctors (2009) (TD09)). A narrative synthesis of the data was undertaken. Narrative interviews were conducted with 185 participants from 8 stakeholder groups: F1 trainees, newly registered trainee doctors, clinical educators, undergraduate and postgraduate deans and foundation programme directors, other healthcare professionals, employers, policy and government and patient and public representatives. Longitudinal audio-diaries were recorded by 26 F1 trainees over 4 months. The data were analysed thematically and mapped against TD09. Together these data shed light onto how preparedness for practice is conceptualised, measured, how prepared UK medical graduates are for practice, the effectiveness of transition interventions and the currently debated issue of bringing full registration forward to align with medical students’ graduation. Preparedness for practice was conceptualised as both a long- and short-term venture that included personal readiness as well as knowledge, skills and attitudes. It has mainly been researched using self-report measures of generalised incidents that have been shown to be problematic. In terms of transition interventions: assistantships were found to be valuable and efficacious for proactive students as team members, shadowing is effective when undertaken close to employment/setting of F1 post and induction is generally effective but of inconsistent quality. The August transition was highlighted in our interview and audio-diary data where F1s felt unprepared, particularly for the step-change in responsibility, workload, degree of multitasking and understanding where to go for help. Evidence of preparedness for specific tasks, skills and knowledge was contradictory: trainees are well prepared for some practical procedures but not others, reasonably well prepared for history taking and full physical examinations, but mostly unprepared for adopting an holistic understanding of the patient, involving patients in their care, safe and legal prescribing, diagnosing and managing complex clinical conditions and providing immediate care in medical emergencies. Evidence for preparedness for interactional and interpersonal aspects of practice was inconsistent with some studies in the RR suggesting graduates were prepared for team working and communicating with colleagues and patients, but other studies contradicting this. Interview and audio-diary data highlights concerns around F1s preparedness for communicating with angry or upset patients and relatives, breaking bad news, communicating with the wider team (including interprofessionally) and handover communication. There was some evidence in the RR to suggest that graduates were unprepared for dealing with error and safety incidents and lack an understanding of how the clinical environment works. Interview and audio-diary data backs this up, adding that F1s are also unprepared for understanding financial aspects of healthcare. In terms of being personally prepared, RR, interview and audio diary evidence is mixed around graduates’ preparedness for identifying their own limitations, but all data points to graduates’ difficulties in the domain of time management. In terms of personal and situational demographic factors, the RR found that gender did not typically predict perceptions of preparedness, but graduates from more recent cohorts, graduate entry students, graduates from problem based learning courses, UK educated graduates and graduates with an integrated degree reported feeling better prepared. The longitudinal audio-diaries provided insights into the preparedness journey for F1s. There seems to be a general development in the direction of trainees feeling more confident and competent as they gain more experience. However, these developments were not necessarily linear as challenging circumstances (e.g. new specialty, new colleagues, lack of staffing) sometimes made them feel unprepared for situations where they had previously indicated preparedness.

A review of radio channel models for body centric communications

The human body is an extremely challenging environment for the operation of wireless communications systems, not least because of the complex antenna-body electromagnetic interaction effects which can occur. This is further compounded by the impact of movement and the propagation characteristics of the local environment which all have an effect upon body centric communications channels. As the successful design of body area networks (BANs) and other types of body centric system is inextricably linked to a thorough understanding of these factors, the aim of this paper is to conduct a survey of the current state of the art in relation to propagation and channel models primarily for BANs but also considering other types of body centric communications. We initially discuss some of the standardization efforts performed by the Institute of Electrical and Electronics Engineers 802.15.6 task group before focusing on the two most popular types of technologies currently being considered for BANs, namely narrowband and Ultrawideband (UWB) communications. For narrowband communications the applicability of a generic path loss model is contended, before presenting some of the scenario specific models which have proven successful. The impacts of human body shadowing and small-scale fading are also presented alongside some of the most recent research into the Doppler and time dependencies of BANs. For UWB BAN communications, we again consider the path loss as well as empirical tap delay line models developed from a number of extensive channel measurement campaigns conducted by research institutions around the world. Ongoing efforts within collaborative projects such as Committee on Science and Technology Action IC1004 are also described. Finally, recent years have also seen significant developments in other areas of body centric communications such as off-body and body-to-body communications. We highlight some of the newest relevant research in these areas as well as discussing some of the advanced topics which are currently being addressed in the field of body centric communications. Key Points Channel models for body centric comms ©2014. The Authors.

A statistical characterization of shadowed device-to-device communications in an indoor environment

This paper presents the results of a measurement campaign aimed at characterizing and modeling the indoor radio channel between two hypothetical cellular handsets. The device-to-device channel measurements were made at 868 MHz and investigated a number of different everyday scenarios such as the devices being held at the user's heads, placed in a pocket and one of the devices placed on a desktop. The recently proposed shadowed k-μ fading model was used to characterize these channels and was shown to provide a good description of the measured data. It was also evident from the experiments, that the device-to-device communications channel is susceptible to shadowing caused by the human body.

Channel measurements of device–to–device communications in an urban outdoor environment

In this paper, the results of radio channel measurements between two hypothetical cellular handsets in an outdoor urban environment are reported. The device-to-device channel measurements were made at 868 MHz and investigated a number of different everyday usage scenarios such as the devices being held at the user's heads, placed in a pocket while one of the users rotated or both moved randomly. It was found that shadowing of the main signal path caused by the human body will be an important factor in future device-to-device communications at this frequency. The recently proposed shadowed κ-μ fading model was used to characterize these channels and shown to provide a good description of the measured data.

Characteristics of shadowed fading in off–body communications channels at 2.45 GHz

In this paper, a number of off-body channels which are susceptible to shadowing caused by the human body are investigated. In particular, the recently proposed shadowed κ–μ fading model is fitted to data obtained from field trials performed in low multipath conditions at 2.45 GHz. It is shown that this model provides a significantly improved fit to off-body channels which are subject to shadowing when compared to other fading models such as lognormal, Nakagami-m and Rice which are commonly applied to model fading in body centric communications channels.