Upper Devonian biostratigraphy of the Iberian Pyrite Belt, southwest Spain Part One: Miospores

The Iberian Pyrite Belt (IPB), which forms part of the Variscan orogenic massif, is renowned for the magnitude and extent of its massive sulfide mineralization. The stratigraphic record of the IPB consists of Upper Palaeozoic sedimentary and igneous rocks. In ascending order, these comprise the thick Phyllite-Quartzite Group attributed to the Middle and Upper Devonian and characterized by shales and quartzites with conglomeratic and carbonate intercalations towards the top; the appreciably thinner Volcano-Sedimentary Complex, a heterogeneous uppermost Devonian-Mississippian unit embodying diverse volcanic, subvolcanic, and sedimentary rocks that host the massive sulfide deposits; and the shaly and sandy, turbiditic Culm Group (Carboniferous). This entire succession was folded and faulted during the Asturian phase of the Variscan Orogeny that gave rise to a thin-skinned type structure. The present study constitutes a detailed blostratigraphic investigation of palynologically productive samples representative of the Phyllite-Quartzite Group and the basal (anoxic) portion of the Volcano-Sedimentary Complex. These were collected from surface and mine exposures variously located in the Spanish part of the IPB; out of 282 samples processed, 117 proved to be productive palynologically. The aim of this project is to provide comprehensive palynostratigraphic data applicable to precise dating and correlation of the IPB's stratigraphic succession (i.e., of the two sampled lithostratigraphic units), which has hitherto been investigated biostratigraphically on a relatively localized basis. The results are incorporated in two successive parts. The first of these, i. e., the present paper, focuses on the systematic analysis of the terrestrial (miospore) component of the palynological assemblages. The second part, devoted to the marine, organic-walled microphytoplankton (acritarchs and prasinophytes), will evaluate the stratigraphic significance of the IPB palynofloras and their application to elucidating the geological history of the region. In the systematic-descriptive section, which occupies the bulk of this paper, 55 species of trilete miospores are described and are allocated among 34 genera, two of which (Cristicavatispora and Epigruspora) are newly instituted herein. The majority of the species are either positively identifiable or closely affiliable with previously named species. The nine newly established species are as follows: Camptozonotriletes confertus, Indotriradites diversispinosus, Cristicavatispora dispersa (type species), Epigruspora regularis (type species), Ancyrospora? implicata, Endosporites tuberosus, Rugospora explicata, Spelaeotriletes plicatus, and Teichertospora iberica.

Upper Devonian biostratigraphy of the Iberian Pyrite Belt, southwest Spain Part Two: Organic-walled microphytoplankton

Upper Devonian rocks of the Iberian Pyrite Belt (IPB) in southwest Spain, comprising the Phyllite-Quartzite Group (PQ) and the lower part of the overlying Volcano-Sedimentary Complex (VSC), contain a diversity of terrestrial and marine palynomorphs (miospores and organic-walled microphytoplankton, respectively), which constitute the basis of this biostratigraphically oriented research project. Part One of the report has previously detailed the miospore content of the constituent 117 palyniferous samples. In the present paper (i.e., the concluding Part Two), the organic-walled microphytoplankton (acritarchs and prasinophyte phycomata) are systematically described and illustrated, and their occurrence in the study material is fully documented. The acritarchs are represented by 23 species (including one species complex) allocated among 14 genera (one of which, Dupliciradiatum, is newly established), together with a very rare and novel category (informally termed Gen. nov. A). The following new acritarch species are formally instituted: Dupliciradiatum crassum (type species), D. tenue, Histopalla languida, and Winwaloeusia repagulata. Five genera allied with the prasinophycean algae are identified; these accommodate a total of 15 species of which two - Cymatiosphaera tenuimembrana and Maranhites multioculus - are formally proposed as new. In addition, representatives of the prasinophyte genera Leiosphaeridia and Tasmanites are recorded but are not discriminated at species level. The microphytoplankton suite is clearly consonant, from previously published occurrences in other regions, with a Late Devonian dating. However, most of the species are known to be relatively long ranging through (and in some cases beyond) that epoch and hence are not amenable to detailed biozonal subdivision of the IPB succession. Moreover, the distribution of the species therein tends to be erratic in comparison with the more consistently occurring miospores, possibly due to stress factors induced by fluctuating conditions in the IPBs Upper Devonian marine environment. By contrast, the land-derived (miospore) assemblages are readily applicable in a blostratigraphic context: they can be correlated precisely with the Devonian miospore biozonation scheme for Western Europe. In those terms, the sampled PQ strata are assignable to the Diducites versabilis-Grandispora cornuta (VCo) Biozone of late Famennian age; while the samples from the anoxic sequence at the base of the VSC belong to the Retispora lepidophyta-Verrucosisporites nitidus (LN) Biozone (latest Famennian = latest Devonian). The biochronostratigraphic data, in conjunction with the findings from earlier IPB studies, imply two appreciable palynostratigraphic breaks within the PQ. These are representative, respectively, of the lower Frasnian-middle Famennian interval and of part of the Strunian/upper Famennian. Speculation currently remains as to whether the inferred gaps are more apparent than real; i.e., whether one or both represent actual hiatuses in IPB sedimentation or are simply a manifestation of hitherto unsampled and/or non-palyniferous PQ strata.

(Table 1) Bulk Fe isotope values and pyrite framboids sizes of Cenomanian-Turonian samples

Organic carbon-rich shales from localities in England, Italy, and Morocco, which formed during the Cenomanian-Turonian oceanic anoxic event (OAE), have been examined for their total organic carbon (TOC) values together with their carbon, nitrogen, and iron isotope ratios. Carbon isotope stratigraphy (d13Corg and d13Ccarb) allows accurate recognition of the strata that record the oceanic anoxic event, in some cases allowing characterization of isotopic species before, during, and after the OAE. Within the black shales formed during the OAE, relatively heavy nitrogen isotope ratios, which correlate positively with TOC, suggest nitrate reduction (leading ultimately to denitrification and/or anaerobic ammonium oxidation). Black shales deposited before the onset of the OAE in Italy have unusually low bulk d57Fe values, unlike those found in the black shale (Livello Bonarelli) deposited during the oceanic anoxic event itself: These latter conform to the Phanerozoic norm for organic-rich sediments. Pyrite formation in the pre-OAE black shales has apparently taken place via dissimilatory iron reduction (DIR), within the sediment, a suboxic process that causes an approximately -2 per mil fractionation between a lithogenic Fe(III)oxide source and Fe(II)aq. In contrast, bacterial sulfate reduction (BSR), at least partly in the water column, characterized the OAE itself and was accompanied by only minor iron isotope fractionation. This change in the manner of pyrite formation is reflected in a decrease in the average pyrite framboid diameter from ~10 to ~7 µm. The gradual, albeit irregular increase in Fe isotope values during the OAE, as recorded in the Italian section, is taken to demonstrate limited isotopic evolution of the dissolved iron pool, consequent upon ongoing water column precipitation of pyrite under euxinic conditions. Given that evidence exists for both nitrate and sulfate reduction during the OAE, it is evident that redox conditions in the water column were highly variable, in both time and space.

Reconstructing the event stratigraphy from the complex structural - stratigraphic architecture of an Archaean volcanic – intrusive – sedimentary succession : the Boorara Domain, Eastern Goldfields Superterrane, Western Australia

Two main deformational phases are recognised in the Archaean Boorara Domain of the Kalgoorlie Terrane, Eastern Goldfields Superterrane, Yilgarn Craton, Western Australia, primarily involving southover- north thrust faulting that repeated and thickened the stratigraphy, followed by east northeast – west-southwest shortening that resulted in macroscale folding of the greenstone lithologies. The domain preserves mid-greenschist facies metamorphic grade, with an increase to lower amphibolite metamorphic grade towards the north of the region. As a result of the deformation and metamorphism, individual stratigraphic horizons are difficult to trace continuously throughout the entire domain. Volcanological and sedimentological textures and structures, primary lithological contacts, petrography and geochemistry have been used to correlate lithofacies between faultbounded structural blocks. The correlated stratigraphic sequence for the Boorara Domain comprises quartzo-feldspathic turbidite packages, overlain by high-Mg tholeiitic basalt (lower basalt), coherent and clastic dacite facies, intrusive and extrusive komatiite units, an overlying komatiitic basalt unit (upper basalt), and at the stratigraphic top of the sequence, volcaniclastic quartz-rich turbidites. Reconstruction of the stratigraphy and consideration of emplacement dynamics has allowed reconstruction of the emplacement history and setting of the preserved sequence. This involves a felsic, mafic and ultramafic magmatic system emplaced as high-level intrusions, with localised emergent volcanic centres, into a submarine basin in which active sedimentation was occurring.

Electron paramagnetic resonance, optical absorption and Raman spectral studies on a pyrite/chalcopyrite mineral

Pyrite and chalcopyrite mineral samples from Mangampet barite mine, Kadapa, Andhra Pradesh, India are used in the present study. XRD data indicate that the pyrite mineral has a face centered cubic lattice structure with lattice constant 5.4179 Å. Also it possesses an average particle size of 91.9 nm. An EPR study on the powdered samples confirms the presence of iron in pyrite and iron and Mn(II) in chalcopyrite. The optical absorption spectrum of chalcopyrite indicates presence of copper which is in a distorted octahedral environment. NIR results confirm the presence of water fundamentals and Raman spectrum reveals the presence of water and sulfate ions.

Application of TG-FTIR to study SO2 evolved during the thermal decomposition of coal-derived pyrite

The thermal decomposition of the coal-derived pyrite was studied using thermogravimetry combining with Fourier-transform infrared spectroscopy (TG-FTIR) techniques to gain knowledge on the SO2 gas evolution process and formation mechanism during the thermal decomposition of the coal-derived pyrite. The results showed that the thermal decomposition of the coal-derived pyrite which started at about 400 ◦C was complete at 600 ◦C; the gas evolved can be established by combining the DTG peak, the Gram–Schmidt curve and in situ FTIR spectroscopic evolved gas analysis. It can be observed from the spectra that the pyrolysis products for the sample mainly vary in quantity, but not in species. It was proposed that the oxidation of the coal-derived pyrite started at about 400 ◦C and that pyrrhotite and hematite were formed as primary products. The SO2 released by the thermal decomposition of the coal-derived pyrite mainly occurred in the first pyrolysis stage between 410 and 470 ◦C with the maximum rate at 444 ◦C. Furthermore, the SO2 gas evolution and formation mechanism during the thermal decomposition of the coal-derived pyrite has been proposed.

Compaction control of topography and fault network structure along strike-slip faults in sedimentary basins

Strike-slip faults commonly display structurally complex areas of positive or negative topography. Understanding the development of such areas has important implications for earthquake studies and hydrocarbon exploration. Previous workers identified the key factors controlling the occurrence of both topographic modes and the related structural styles. Kinematic and stress boundary conditions are of first-order relevance. Surface mass transport and material properties affect fault network structure. Experiments demonstrate that dilatancy can generate positive topography even under simple-shear boundary conditions. Here, we use physical models with sand to show that the degree of compaction of the deformed rocks alone can determine the type of topography and related surface fault network structure in simple-shear settings. In our experiments, volume changes of ∼5% are sufficient to generate localized uplift or subsidence. We discuss scalability of model volume changes and fault network structure and show that our model fault zones satisfy geometrical similarity with natural flower structures. Our results imply that compaction may be an important factor in the development of topography and fault network structure along strike-slip faults in sedimentary basins.

Mechanisms of sulfide ion oxidation during cyanidation. Part II : Surface catalysis by pyrite

The mechanisms and the reaction products for the oxidation of sulfide ions in the presence of pyrite have been established. When the leach solution contains free sulfide ions, oxidation occurs via electron transfer from the sulfide ion to dissolved oxygen on the pyrite mineral surface, with polysulfides being formed as an intermediate oxidation product. In the absence of cyanide, the polysulfides are further oxidised to thiosulfate, whilst with cyanide present, thiocyanate and sulfite are also formed from the reaction of polysulfides with cyanide and dissolved oxygen. Polysulfide chain length has been shown to affect the final reaction products of polysulfide oxidation by dissolved oxygen. The rate of pyrite catalysed sulfide ion oxidation was found to be slower in cyanide solutions compared to cyanide free solutions. Mixed potential measurements indicated that the reduction of oxygen at the pyrite surface is hindered in the presence of cyanide. The presence of sulfide ions was also found to activate the pyrite surface, increasing its rate of oxidation by oxygen. This effect was particularly evident in the presence of cyanide; in the presence of sulfide the increase in total sulfur from pyrite oxidation was 2.3 mM in 7 h, compared to an increase of <1 mM in the absence of sulfide over 24 h.

Evolved gas analysis of coal-derived pyrite/marcasite

The products evolved during the thermal decomposition of the coal-derived pyrite/marcasite were studied using simultaneous thermogravimetry coupled with Fourier-transform infrared spectroscopy and mass spectrometry (TG-FTIR–MS) technique. The main gases and volatile products released during the thermal decomposition of the coal-derived pyrite/marcasite are water (H2O), carbon dioxide (CO2), and sulfur dioxide (SO2). The results showed that the evolved products obtained were mainly divided into two processes: (1) the main evolved product H2O is mainly released at below 300 °C; (2) under the temperature of 450–650 °C, the main evolved products are SO2 and small amount of CO2. It is worth mentioning that SO3 was not observed as a product as no peak was observed in the m/z = 80 curve. The chemical substance SO2 is present as the main gaseous product in the thermal decomposition for the sample. The coal-derived pyrite/marcasite is different from mineral pyrite in thermal decomposition temperature. The mass spectrometric analysis results are in good agreement with the infrared spectroscopic analysis of the evolved gases. These results give the evidence on the thermal decomposition products and make all explanations have the sufficient evidence. Therefore, TG–MS–IR is a powerful tool for the investigation of gas evolution from the thermal decomposition of materials.

Raman spectroscopy of pyrite in marble from Chillagoe, Queensland

Samples of marble from Chillagoe, North Queensland have been analysed using scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) and Raman spectroscopy. Different types of marble were studied including soft white marble, hard white marble and a black marble. In this work, we try to ascertain why the black marble has this colour. Chemical analyses provide evidence for the presence of minerals other calcite in the marble, including the pyrite mineral. Some of these chemical analyses correspond to pyrite minerals in the black marble. The Raman spectra of these crystals were obtained and the Raman spectrum corresponds to that of pyrite from the RRUFF data base. The combination of SEM with EDS and Raman spectroscopy enables the characterisation of the mineral pyrite in Chillagoe black marble.