Condutividade elétrica complexa de rochas

Foram realizadas medidas em laboratório da condutividade elétrica complexa de 28 amostras de testemunhos de sondagem de três furos da área MM1-Alvo 1, Distrito dos Carajás, com o objetivo de auxiliar na interpretação de dados geofísicos de campo, obtidos com os métodos polarização induzida/resistividade e eletromagnético/AFMAG, aplicados na área. As medidas foram tomadas no intervalo de frequências de 10^-3Hz a 10⁴Hz, medindo-se a amplitude e a fase da condutância. O método empregado foi o de medida direta de impedância, utilizando-se um osciloscópio com memória, um gerador de sinais e dois pré-amplificadores diferenciais com alta impedância de entrada. O sistema de eletrodos escolhido para realizar as medidas foi o de 2 eletrodos de platina-platinizada em virtude de sua resposta de frequência ser plana no intervalo utilizado. Todas as medidas foram realizadas à temperatura constante de 24°C ± 1°C. Para interpretar as medidas de condutividade foi realizado estudo petrográfico das amostras, utilizando-se lâminas delgadas, seções polidas e difração de Raios-X. Foi determinado o teor de cobre, sob a forma de sulfeto, nas amostras utilizando-se o método de absorção atômica. Os resultados petrográficos permitiram classificar as amostras em cinco grupos distintos: granito, biotita-xisto, anfibolito, anfibólio-xisto e quartzito ferruginoso-formação ferrífera. O teor de cobre foi variável nos cinco grupos, havendo teores desde 50ppm até 6000ppm. Nas medidas de condutividade observou-se que, dentre os cinco grupos, as amostras da formação ferrífera apresentaram as maiores variações com a frequência. As amostras de granito tiveram espectro mais plano que as dos xistos e anfibolito. A conclusão a que se chegou é que as anomalias eletromagnéticas e de polarização induzida/resistividade observadas no campo próximo aos três furos (F₁, F₂, F₃) são devidas principalmgnte a formação ferrífera magnetitica, a secundariamente à mineralização de baixo teor de calcopirita associada.

Métodos geofísicos aplicados à prospecção de cobre na Serras de Carajás-Pará

Através de um convênio entre o Núcleo de Ciências Geofísicas e Geológicas da UFPa e a Companhia Rio Doce Geologia e Mineração S.A., um trabalho geofísico foi realizado na área denomina da ALVO 1, MM1, Serra dos Carajás, sul do Pará, Brasil. Foram aplicados os métodos magnético, polarização elétrica induzida e AFMAG, visando determinar a existência e a distribuição de sulfetos de cobre em subsuperfície. O trabalho foi realizado em uma malha de reconhecimento de 9 km² (ALVO 1) e em outra de detalhe com aproximadamente 0.63 km² (Corpo 2). O método AFMAG detectou vários condutores deslocados entre si por prováveis falhamentos. A orientação destes condutores, coincide com o "strike" dominante do xisto, o qual contém sulfetos de cobre associado a uma formação ferrífera. Pela estreita correlação que guardam com as anomalias magnéticas é possível supor-se que as anomalias de AFMAG são provocadas primeiramente pela formação ferrífera e secundariamente pelos sulfetos. O método magnético detectou fortes anomalias sobre a formação ferrífera. O deslocamento dos segmentos de anomalias implica em falhamento. Este método é muito importante na área, pela relação mantida entre a zona dos sulfetos e a formação ferrífera. O método polarização elétrica induzida/resistividade detectou anomalias com EPF variando de 6 a 12% aproximadamente. Várias destas anomalias foram confirmadas com furos de sondagem e trabalho de laboratório (Rocha, 1979). Verificou-se que essas anomalias provavelmente são provocadas por efeito combinado da formação ferrífera magnética e do sulfeto. A pesquisa geofísica realizada nesta área piloto tem grande importância porque os resultados obtidos poderão ser estendidos a uma área maior, em condições geológicas semelhantes.

Basaltos almofadados da Suíte Ofiolítica Morro do Agostinho: registros de fundo oceânico na porção centro-oeste do Cinturão Araguaia

Ao longo do domínio de baixo grau metamórfico (porção centro-oeste) do Cinturão Araguaia, afloram dezenas de corpos máficos e/ou ultramáficos de natureza ofiolítica. Cita-se como exemplo a Suíte Ofiolítica Morro do Agostinho nos arredores da cidade de Araguacema (TO) que configura um pequeno corpo isolado que sustenta o Morro do Agostinho e encontra-se encaixado tectonicamente em metarenitos, ardósias e filitos da Formação Couto Magalhães (Grupo Tocantins). A Suíte Ofiolítica Morro do Agostinho é constituída por peridotitos serpentinizados, basaltos e cherts ferríferos todos afetados por incipiente metamorfismo. A associação de basaltos é caracterizada por um expressivo derrame submarino com estruturas em lavas almofadadas, sobrepostas aos peridotitos serpentinizados. Os basaltos foram classificados em tipos maciços e hipovítreos com esferulitos. Os basaltos maciços são homogêneos, com textura intersertal definida, essencialmente, por finas ripas de plagioclásio, clinopiroxênio e raramente olivina, calcocita e calcopirita. Os basaltos hipovítreos apresentam feições texturais formadas por ultrarresfriamento de lavas apresentando esferulitos de plagioclásio, feixes de cristais aciculares e esqueletais de clinopiroxênio e plagioclásio, e cristais com terminações tipo rabo-de-andorinha. Geoquimicamente, os basaltos revelaram natureza subalcalina toleítica, compatíveis com o tipo MORB. As razões (La/Yb)_n < 1 e (La/Sm)_n < 1 apontam, mais especificamente, para magmas do tipo N-MORB na evolução dessas rochas relacionadas ao ambiente de fundo oceânico. Estas rochas revelaram que nos estágios iniciais da evolução do Cinturão Araguaia houve uma fase importante de oceanização da Bacia Araguaia, com exposição de peridotitos do manto litosférico seguido de extravasamento de lavas e sedimentação de cherts e formações ferríferas bandadas em ambiente oceânico profundo. Após o preenchimento sedimentar da Formação Couto Magalhães (Grupo Tocantins), e o descolamento da litosfera oceânica, a fase tectônica principal propiciou a inversão tectônica que levou à exumação dos corpos ofiolíticos, principalmente ao longo de superfícies de cavalgamento, fragmentando-os e misturando-os tectonicamente às rochas supracrustais, acompanhado de metamorfismo regional em condições da fácies xisto verde baixo. A Suíte Ofiolítica Morro do Agostinho representa, assim, um pequeno fragmento alóctone de um segmento litosférico manto/crosta oceânica, bem preservado, do início da evolução da Bacia Araguaia, similar a outros no Cinturão Araguaia, que é um importante registro da fase de oceanização do Cinturão Araguaia, durante o Neoproterozoico.

Geocronologia e evolução crustal da área do depósito de Cu-Au Gameleira, Província Mineral de Carajás (Pará), Brasil

O depósito de Cu-Au Gameleira está hospedado nas rochas do Grupo Igarapé Pojuca, pertencente ao Supergrupo Itacaiúnas, Província Mineral de Carajás, SE do Cráton Amazônico. Esse grupo está representado principalmente por rochas metavulcânicas máficas (RMV), anfibolitos, biotita xistos, formações ferríferas e/ou hidrotermalitos, cortadas por rochas intrusivas máficas (RIM), bem como por granitos arqueanos (2,56 Ga, Granito Deformado Itacaiúnas) e paleoproterozóicos (1,87 - 1,58 Ga, Granito Pojuca e Leucogranito do Gameleira). Cristais de zircão de um saprolito (2615 ± 10 Ma e 2683 ± 7 Ma) e de uma amostra de RIM (2705 ± 2 Ma), mostraram ser contemporâneos aos dos gabros do depósito Águas Claras. Datações Pb-Pb em rocha total e calcopirita de RMV indicaram idades de 2245 ± 29 Ma e 2419 ± 12 Ma, respectivamente, enquanto lixiviados de calcopirita indicaram idades de 2217 ± 19 Ma e 2180 ± 84 Ma. Essas idades são interpretadas como rejuvenescimento parcial provocado pelas intrusões graníticas proterozóicas (1,58 e 1,87 Ga) ou pelas reativações tectônicas associadas aos Sistemas Transcorrentes Carajás e Cinzento, ou total, provocada pelas últimas. As idades-modelo T_DM de 3,12 e 3,33 Ga para as RMV e RIM e os valores de _εNd (t) de -0,89 a -3,26 sugerem contribuição continental de rochas mais antigas e magmas gerados possivelmente em um ambiente de rifte continental ou de margem continental ativa.

Caracterização petrográfica e geoquímica das rochas encaixantes da mineralização de ouro do alvo lavra velha - Ibitiara (BA)

The Lavra Velha gold prospect is located in Ibitiara city, in the Espinhaço Setentrional physiographic domain, on the west edge of Chapada Diamantina – central part of Bahia. It is inserting on Gavião Block, a compartment of São Francisco Cráton (Almeida, 1977). The Lavra Velha gold dump is formed by an association of hydrothermal breccia lodged in acid and intermediate rocks, classifying in tonalite, granodiorite and diorite, with high alteration, cut off by a vein and venules system constituted by hydrothermal association composed by hematite, tourmaline, quarz and sericite, located in the north limit of Ibitiara granite. In the regional geological context the area is represented by Archaean rocks (Paramirim Complex) and Paleoproterozoic rocks (Ibitiara granitoid and Matinos Granite) constituted the basement, following by paleo to mesozoic pluton-vulcanic-sedimentary association of Rio dos Remédios Group, intruded by mafic rocks. It was used geochemistry and petrographic analysis compiling to field works data to characterize the rocks where the gold mineralization is inserting. Previously these rocks were classifying in volcanic rocks of Novo Horizonte Formation. Developing this monograph’s work the petrogenetic characteristics suggesting that these rocks called volcanic actually belong to Ibitiara granitoid as a portion more metamorphosed. The green schist is the predominant metamorphism in the area with low deformation, associated to high concentration of fluid circulating. The hydrothermal alteration is the process responsible for rocks modifications and strong sericitization generalize

Caracterização petrográfica dos alvos Hidrotermalitos Norte e Sul, Suruca e porção NW da Mina de Chapada - Alto Horizonte, GO

Main occurrence of Cu-Au in Goias Magmatic Arc, the Chapada mine fits into the geological context of the Brasilia Fold Belt, specifically in the Mara Rosa Magmatic Arc. Four targets, named Hidrotermalito Norte and Sul, NW Chapada Mine Portion and Suruca, are situated in this context, which includes ortogneisses and rocks from the Mara Rosa volcanic-sedimentary sequence. All these targets have been studied due to the possibility of presenting a great potential in Cu-Au, as well as the Chapada mine. Hidrotermalitos Norte and Sul targets presents four lithological sequences, which were identified as: quartz-muscovite schist; muscovite quartzites and kyanite quartzites; quartz-biotite-amphibole schist with pyrite and epidote-amphibole-biotite gneisses with muscovite; muscovite-biotite gneisses. They are metamorphosed to amphibolites facies and retrogressive greenschist facies. Sulfetation represented mainly by pyrite. In the NW Chapada Mine Portion, three main lithological groups were identified and classified as biotite gneisses; honblende-quartz-biotite-schist; amphibolites, with the first group metamorphosed in greenschist facies (low grade), and the other two groups metamorphosed in amphibolites facies, with subsequent retrogressive metamorphism in greenschist facies. Sulfetation is represented by chalcopyrite and pyrite. Finally, also three main lithological groups were identified in the Suruca target, classified as garnet-chlorite-epidote-eiotite gneiss; biotite gneiss and chlorite-biotite gneiss with epidote and muscovite; muscovite-quartz schist, all them metamorphised in amphibolites, with retrometamorphism in greenschist facies. Sulfetation represented by pyrite and sphalerite

Levantamento estrutural da porção norte do Greenstone Belt do rio Itapicuru e dos Alvos Encantado e C1W, Bahia

The study area is located in the geological context of the northern portion of the Rio Itapicuru Greenstone Belt (GBRI), located northeast of the São Francisco Craton, Bahia State. The GBRI is known for its great economic potential for gold mineralization, looking south at Fazenda Brasileiro Mine and North Mine Maria Preta, is situated in the study área. The structural pattern of the northern portion of the Greenstone, theme of this work, is of great importance to understand the mineralization present. To characterize the structural model three geologic sections (scale 1:25000) were made with NW-SE and EW directions and detailing two mineralized targets, Encantado, located northwest of the area, near the city of Nordestina, and C1W, located near Itapicuru River, west of the Maria Preta mine. Thus, field work and petrographic analysis were conducted, that allow to indicate the existence of two structural domains characterized by the existence of a main foliation, low angle dipping main foliation and another with high dip angle, both with NW, moreover, folds occur in the area Dn-1 and post-Dn folds. Dn-1 folds are observed less frequently but they occur mainly forming an oblique foliation and the Sn is present in porphyroblasts observed in petrographic analysis, whereas in relation to the folds post Dn, there are more than one type of folding in area, which differ by the orientation of their axis, a post Dn NS and EW Dn another post. Moreover, two areas of metamorphic green schist (biotite zone) and medium amphibolite, which are directly related to the structural domains found

Geologia do depósito de ouro do alvo guarda-mor, na sequência Jaupaci (Israelândia - GO)

The study area of the Guarda-Mor target (Israelândia-GO) contextualizes the terrains of the estaern portion of the Arenópolis Magmatic Arc, more accurately, the Neoproterozoic associations inserted in the field of the Jaupaci volcano-sedimentary sequence. The mapped area is located in the central-western of Goiás state. The presente paper has as main objective to characterize the structural, petrographic and litogeochemistry of the target rocks beyond to compare these factors with the Mina Bacilândia rocks (Fazenda Nova-GO) in order to assess the genetic similarity of volcano-sedimentary units and deposits associated. The Guarda-Mor target is represented by the Jaupaci metavolcanic rocks sequence presenting bimodal volcanism. This sequence consists in metafelsic rocks like sericite/muscovite quartz schist, phyllite and metarriolites and/or metariodacites with calc-alkaline geochemical signature and metamafic rocks with tholeiitic character formed by actinolite - chlorite schist and chlorite - quartz schist. Besides the package of supracrustal rocks also can be observed the occurrence of a local intrusion syn- to late - tectonic named Granito Subvulcânico. In the study area beyond the marked volcanism also seen an event of crustal melting granitogênese evidenced by the presence of 2 granites at the east and the west of the map, Granito Israelândia and Granito Iporá respectively. Structural analysis both at the macro and micro have identified 3 deformation phases. The types of rock on the region record features in the metamorphic facies top and down. These features were subdivided into 3 metamorphic areas: the east and West areas show thermal metamorphism due to intrusion of adjacente granites while the central domain displays features of regional metamorphism. Gold mineralization of the Guarda –Mor deposit target suggests a possible structural control beyond pronounced the hydrothermal alteration. The mineralization may also be...

Caracterização estrutural da mineralização da mina de Fazenda Nova - GO

The study area is includes in the geological context of Arenópolis Magmatic Arc, a region where there are neoproterozoic associations of granodioritic and tonalitic composiotion. (Ortogneisses of the western Goiás) and sequences metavolcanic-sedimentary (Jaupaci Metavolcanic-sedimentary Sequence ). In the mapped area, both units are covered by a cover-laterite. The Ortogneisses from Goiás West consist of a source granodioritic gneisses, corresponding to the Biotite granodiorite gneisse, and also by tonalitic gneiss composition corresponding to Metatonalit. The Jaupaci Metavolcanic-sedimentary Sequence is formed by Chlorite Schist (Metabasalt), Biotite Schist (Metadacite) and Sericite Schist (Metarhyolite), and even intrusions Sin/Tardi e Post Tectonic, granite to diorite composition (Diorites), and alson tonalitic (Bacilandia Tonalite). Post tectonic intrusions are observed, wich were Hornblend Diorite Porphyry and Lamprophyres, Structural analysis allowed the identification of three deformational events, Dn-1, Dn and Post-Dn. The first event is associated with a bygone foliation, lineation which generates an intersectional event, generating the foliation Sn, this being the most important structure in the study area, generating even the type mineral lineation and stretch. The last deformational event is characterized by folds on different scales, affecting the Sn foliation. The rocks of the region have features s active hydrothermal and regional metamorphism, and are composed os assembly indicative of mineralogical facies metamorphism Green Schist, in chlotite zone, with evidence of retro metamorphism. Locally there are sulfides as pyrite, arsenopyrit and pyrhotite, and te mineralization is associated with the arsenopyrite

Condutividade hidráulica saturada e direcional em xisto: ensaios em laboratório. -

Pós-graduação em Geociências e Meio Ambiente - IGCE

Finite-strain analysis in orthogneiss of the Gran Paradiso massif, Western Alps, Italy

A finite-strain study in the Gran Paradiso massif of the Italian Western Alps has been carried out to elucidate whether ductile strain shows a relationship to nappe contacts and to shed light on the nature of the subhorizontal foliation typical of the gneiss nappes in the Alps. The Rf/_ and Fry methods used on feldspar porphyroclasts from 143 augengneiss and 11 conglomerate samples of the Gran Paradiso unit (upper tectonic unit of the Gran Paradiso massif), as well as, 9 augengneiss (Erfaulet granite) and 3 quartzite conglomerate samples from the underlying Erfaulet unit (lower unit of the Gran Paradiso massif), and 1 sample from mica schist. Microstructures and thermobarometric data show that feldspar ductility at temperatures >~450°C occurred only during high-pressure metamorphism, when the rocks were underplated beneath the overriding Adriatic plate. Therefore, the finite-strain data can be related to high-pressure metamorphism in the Alpine subduction zone. The augen gneiss was heterogeneously deformed and axial ratios of the strain ellipse in XZ sections range from 2.1 to 69.8. The long axes of the finite-strain ellipsoids trend W/WNW and the short axes are subvertical associated with a subhorizontal foliation. The strain magnitudes do not increase towards the nappe contacts. Geochemical work shows that the accumulation of finite strain was not associated with any significant volume strain. Hence, the data indicate flattening strain type in the Gran Paradiso unit and constrictional strain type in the Erfaulet unit and prove deviations from simple shear. In addition, electron microprobe work was undertaken to determine if the analysed fabrics formed during high-P metamorphism. The chemistry of phengites in the studied samples suggests that deformation and final structural juxtaposition of the Gran Paradiso unit against the Erfaulet took place during high-pressure metamorphism. On the other hand, nappe stacking occurred early during subduction probably by brittle imbrication and that ductile strain was superimposed on and modified the nappe structure during high-pressure underplating in the Alpine subduction zone. The accumulation of ductile strain during underplating was not by simple shear and involved a component of vertical shortening, which caused the subhorizontal foliation in the Gran Paradiso massif. It is concluded that this foliation formed during thrusting of the nappes onto each other suggesting that nappe stacking was associated with vertical shortening. The primary evidence for this interpretation is an attenuated metamorphic section with high-pressure metamorphic rocks of the Gran Paradiso unit juxtaposed against the Erfaulet unit. Therefore, the exhumation during high-pressure metamorphism in the Alpine subduction zone involved a component of vertical shortening, which is responsible for the subhorizontal foliation within the nappes.

Entwicklung einer Anordnung zur Nutzung von Massenschwerebewegungen beim Quarzitabbau im Rheinischen Schiefergebirge

Die (Wieder-)Nutzung auf Schwerkraft basierender Fördertechniken, die insbesondere durch das niedrige Energiepreisniveau in den Jahrzehnten nach dem 2. Weltkrieg in der Tagebautechnik nahezu vollständig verdrängt wurden, ist bei den heutigen wirtschaftlichen Randbedingungen und anzustrebenden ökologischen Standards eine Herausforderung für die bergbautreibende Industrie. Seit Aufnahme der Entwicklung des Förderkonzeptes – Geführte Versturztechnik – Mitte der 1990er Jahre haben sich die Kosten für Rohöl vor Steuern nach dem Tiefstand um das Jahr 1998 bis heute mehr als verdreifacht, alleine seit 2004 mehr als verdoppelt. Gesetzliche Regelwerke wie die europäische IVU-Richtlinie 96/61/EG zur „integrierten Vermeidung und Verminderung der Umweltverschmutzung“ fordern, Genehmigungen nur noch bei Einsatz der besten verfügbaren Techniken (BVT oder BAT: „best available techniques“) zu erteilen. Die Umsetzung in nationale Vorschriften wie das Bundes-Immissionsschutzgesetz und nachgeordnete Regelwerke fordern hierauf aufbauend, dass Umweltbelastungen nicht in andere Medien verlagert werden dürfen. Die Anordnung einer Versturzrinne zur Nutzung von Massenschwerebewegungen am Beispiel von Quarzitabbau im Rheinischen Schiefergebirge bei denen die Förderbezugsebene unterhalb der Strossen liegt, die zur sichern und selektiven Gewinnung des Rohstoffs aufgefahren werden müssen, erfüllt durch Rückgriff auf ein vermeintlich „archaisches“ Förderkonzept durch Nutzung der Schwerkraft die obigen Anforderungen. Offenkundige Umweltbelastungen, die alleine durch die Verbrennung von Dieselkraftstoff und hieraus resultierender Schadstoff- und Wärmeeinträge in die Luft beim verbreiteten Einsatz von SLKW zur Abwärtsförderung entstehen, können erheblich vermindert werden. Der Aspekt der Betriebssicherheit einer solchen Anordnung kann durch Auffahren eines geradlinigen Bauwerks mit an das Fördergut angepassten Dimensionen sowie Einrichtungen zur Beschränkung der kinetischen Energie erreicht werden. Diese stellen auch gleichzeitig sicher, dass die Zerkleinerung des durch die Versturzrinne abwärts transportierten Materials betrieblich zulässige Grenzen nicht überschreitet. Hierfür kann auf das umfangreiche Wissen zu Massenschwerebewegungen Rückgriff genommen werden. Dem Aspekt des Umweltschutzes, der sich in Bezug auf das Medium Luft auf den autochtonen Staub reduziert, kann durch Vorrichtungen zur Staubniederschlagung Rechnung getragen werden. Vertiefende Untersuchungen sind erforderlich, um die mit komplexen, aber erprobten Techniken arbeitende Tagebauindustrie auch in dicht besiedelten Regionen wieder an die Nutzung von Schwerkraft (-gestützten) Fördertechniken heranzuführen. Auch das Konzept – Geführte Versturztechnik – ist auf konkrete Anwendungsfälle hin in Details anzupassen.

Structural and strain analysis in the Late Paleozoic coastal accretionary wedge of central Chile

Abstract In this study structural and finite strain data are used to explore the tectonic evolution and the exhumation history of the Chilean accretionary wedge. The Chilean accretionary wedge is part of a Late Paleozoic subduction complex that developed during subduction of the Pacific plate underneath South America. The wedge is commonly subdivided into a structurally lower Western Series and an upper Eastern Series. This study shows the progressive development of structures and finite strain from the least deformed rocks in the eastern part of the Eastern Series of the accretionary wedge to higher grade schist of the Western Series at the Pacific coast. Furthermore, this study reports finite-strain data to quantify the contribution of vertical ductile shortening to exhumation. Vertical ductile shortening is, together with erosion and normal faulting, a process that can aid the exhumation of high-pressure rocks. In the east, structures are characterized by upright chevron folds of sedimentary layering which are associated with a penetrative axial-plane foliation, S1. As the F1 folds became slightly overturned to the west, S1 was folded about recumbent open F2 folds and an S2 axial-plane foliation developed. Near the contact between the Western and Eastern Series S2 represents a prominent subhorizontal transposition foliation. Towards the structural deepest units in the west the transposition foliation became progressively flat lying. Finite-strain data as obtained by Rf/Phi and PDS analysis in metagreywacke and X-ray texture goniometry in phyllosilicate-rich rocks show a smooth and gradual increase in strain magnitude from east to west. There are no evidences for normal faulting or significant structural breaks across the contact of Eastern and Western Series. The progressive structural and strain evolution between both series can be interpreted to reflect a continuous change in the mode of accretion in the subduction wedge. Before ~320-290 Ma the rocks of the Eastern Series were frontally accreted to the Andean margin. Frontal accretion caused horizontal shortening and upright folds and axial-plane foliations developed. At ~320-290 Ma the mode of accretion changed and the rocks of the Western Series were underplated below the Andean margin. This basal accretion caused a major change in the flow field within the wedge and gave rise to vertical shortening and the development of the penetrative subhorizontal transposition foliation. To estimate the amount that vertical ductile shortening contributed to the exhumation of both units finite strain is measured. The tensor average of absolute finite strain yield Sx=1.24, Sy=0.82 and Sz=0.57 implying an average vertical shortening of ca. 43%, which was compensated by volume loss. The finite strain data of the PDS measurements allow to calculate an average volume loss of 41%. A mass balance approximates that most of the solved material stays in the wedge and is precipitated in quartz veins. The average of relative finite strain is Sx=1.65, Sy=0.89 and Sz=0.59 indicating greater vertical shortening in the structurally deeper units. A simple model which integrates velocity gradients along a vertical flow path with a steady-state wedge is used to estimate the contribution of deformation to ductile thinning of the overburden during exhumation. The results show that vertical ductile shortening contributed 15-20% to exhumation. As no large-scale normal faults have been mapped the remaining 80-85% of exhumation must be due to erosion.

Lattice preferred orientation in omphacite: Examples from the Tauern Window, Austria and the Western Gneiss Region, Norway

It is lively debated how eclogites find their way from deep to mid-crustal levels during exhumation. Different exhumation models for high-pressure and ultrahigh-pressure rocks were suggested in previous studies, based mainly on field observations and less on microstructural studies on the exhumed rocks. The development and improvement of electron microscopy techniques allows it, to focus interest on direct investigations of microstructures and crystallographic properties in eclogites. In this case, it is of importance to study the applicability of crystallographic measurements on eclogites for exhumation processes and to unravel which processes affect eclogite textures. Previous studies suggested a strong relationship between deformation and lattice preferred orientation (LPO) in omphacite but it is still unclear if the deformation is related to the exhumation of eclogites. This study is focused on the questions which processes affect omphacite LPO and if textural investigations of omphacite are applicable for studying eclogite exhumation. Therefore, eclogites from two examples in the Alps and in the Caledonides were collected systematically and investigated with respect to omphacite LPO by using the electron backscattered diffraction (EBSD) technique. Omphacite textures of the Tauern Window (Austria) and the Western Gneiss Region (Norway) were studied to compare lattice preferred orientation with field observations and suggested exhumation models from previous studies. The interpretation of omphacite textures, regarding the deformation regime is mainly based on numerical simulations in previous studies. Omphacite LPO patterns of the Eclogite Zone are clearly independent from any kind of exhumation process. The textures were generated during omphacite growth on the prograde path of eclogite development until metamorphic peak conditions. Field observations in the Eclogite Zone show that kinematics in garnet mica schist, surrounding the eclogites, strongly indicate an extrusion wedge geometry. Stretching lineations show top-N thrusting at the base and a top-S normal faulting with a sinistral shear component at the top of the Eclogite Zone. The different shear sense on both sides of the unit does not affect the omphacite textures in any way. The omphacite lattice preferred orientation patterns of the Western Gneiss Region can not be connected with any exhumation model. The textures were probably generated during the metamorphic peak and reflect the change from subduction to exhumation. Eclogite Zone and Western Gneiss Region differ significantly in size and especially in metamorphic conditions. While the Eclogite Zone is characterized by constant P-T conditions (600-650°C, 20-25 kbar), the Western Gneiss Region contains a wide P-T range from high- to ultrahigh pressure conditions (400-800°C, 20-35 kbar). In contrast to this, the omphacite textures of both units are very similar. This means that omphacite LPO is independent from P-T conditions and therefore from burial depth. Further, in both units, omphacite LPO is independent from grain and subgrain size as well as from any shape preferred orientation (SPO) on grain and subgrain scale. Overall, omphacite lattice preferred orientation are generated on the prograde part of omphacite development. Therefore, textural investigations on omphacite LPO are not applicable to study eclogite exhumation.

Microscopic, chemical and spectroscopic investigations on emeralds of various origins

In dieser Arbeit werden die mikroskopischen, chemischen und spektroskopischen Charakteristika von 260 natürlichen Smaragden und 66 synthetischen „Smaragden“ untersucht. Die Konzentrationen der chemischen Elemente von Smaragden wurden mit Hilfe der LA-ICP-MS und EMS bestimmt. Ergänzende Raman- und IR spektroskopische Methoden ermöglichen es, die Herkunft der verschiedenen Smaragde und ihrer synthetischen Analoga zu bestimmen. Auf Grund der verschiedenen Gehalte von Si, Al und Be können synthetische „Smaragde“ von natürlichen getrennt werden. Die Smaragde von Malipo, Chivor und auch synthetische „Smaragde“ können von allen anderen natürlichen Smaragden wegen der unterschiedlichen Cr-, V-, und Fe-Gehalte von einander getrennt werden. Wegen der unterschiedlichen Mg-, Na-, K-Gehalte lassen sich eher „schiefer-gebundene“ Smaragde identifizieren. Dabei wird festgestellt, dass die Unterscheidung in „schiefer-„ und „nichtschiefer-gebundene“ Smaragd-Vorkommen im Wesentlichen nur die Endglieder einer offensichtlich kristallchemisch sehr variablen Mineralchemie der Berylle, bzw. Smaragde beschreibt, dass damit aber keinesfalls eine petrologisch vertretbare Trennung belegbar ist, sondern dass Smaragde nur das jeweils regierende chemische Regime unter geeigneten Druck-Temperatur-Bedingungen widerspiegeln. Einschlussmerkmale spielen eine große Rolle bei der Unterscheidung verschiedener Lagerstätten und Herstellungsmethoden. Zum Beispiel können die Smaragde der drei Lagerstätten Santa Terezinha, Chivor, und Kafubu mit Hilfe ihrer charakteristischen Pyriteinschlüsse identifiziert werden. Die Band-Positionen und FWHM -Werte der Raman-Bande bei 1068 cm-1 und der IR-Bande bei 1200 cm-1 ermöglichen eine Differenzierung zwischen synthetischen und natürlichen Smaragden, und können darüber hinaus auch Auskunft geben über die Lagerstätte. Zusammen mit chemischen Messwerten kann bewiesen werden, dass diese Banden von Si-O Schwingungen verursacht werden. Die Raman- und IR-Banden im Bereich der Wasserschwingungen und insbesondere das IR-Band um 1140 cm-1 führen zur Trennung von Flux-Synthesen, Hydrothermal-Synthesen und natürlichen Smaragden.