A probabilistic methodology for distributed generation location in isolated electrical service area

Distributed generation unlike centralized electrical generation aims to generate electrical energy on small scale as near as possible to load centers, interchanging electric power with the network. This work presents a probabilistic methodology conceived to assist the electric system planning engineers in the selection of the distributed generation location, taking into account the hourly load changes or the daily load cycle. The hourly load centers, for each of the different hourly load scenarios, are calculated deterministically. These location points, properly weighted according to their load magnitude, are used to calculate the best fit probability distribution. This distribution is used to determine the maximum likelihood perimeter of the area where each source distributed generation point should preferably be located by the planning engineers. This takes into account, for example, the availability and the cost of the land lots, which are factors of special relevance in urban areas, as well as several obstacles important for the final selection of the candidates of the distributed generation points. The proposed methodology has been applied to a real case, assuming three different bivariate probability distributions: the Gaussian distribution, a bivariate version of Freund’s exponential distribution and the Weibull probability distribution. The methodology algorithm has been programmed in MATLAB. Results are presented and discussed for the application of the methodology to a realistic case and demonstrate the ability of the proposed methodology for efficiently handling the determination of the best location of the distributed generation and their corresponding distribution networks.

Arrow Plot: a new graphical tool for selecting up and down regulated genes and genes differentially expressed on samples subgroups

Background: A common task in analyzing microarray data is to determine which genes are differentially expressed across two (or more) kind of tissue samples or samples submitted under experimental conditions. Several statistical methods have been proposed to accomplish this goal, generally based on measures of distance between classes. It is well known that biological samples are heterogeneous because of factors such as molecular subtypes or genetic background that are often unknown to the experimenter. For instance, in experiments which involve molecular classification of tumors it is important to identify significant subtypes of cancer. Bimodal or multimodal distributions often reflect the presence of subsamples mixtures. Consequently, there can be genes differentially expressed on sample subgroups which are missed if usual statistical approaches are used. In this paper we propose a new graphical tool which not only identifies genes with up and down regulations, but also genes with differential expression in different subclasses, that are usually missed if current statistical methods are used. This tool is based on two measures of distance between samples, namely the overlapping coefficient (OVL) between two densities and the area under the receiver operating characteristic (ROC) curve. The methodology proposed here was implemented in the open-source R software. Results: This method was applied to a publicly available dataset, as well as to a simulated dataset. We compared our results with the ones obtained using some of the standard methods for detecting differentially expressed genes, namely Welch t-statistic, fold change (FC), rank products (RP), average difference (AD), weighted average difference (WAD), moderated t-statistic (modT), intensity-based moderated t-statistic (ibmT), significance analysis of microarrays (samT) and area under the ROC curve (AUC). On both datasets all differentially expressed genes with bimodal or multimodal distributions were not selected by all standard selection procedures. We also compared our results with (i) area between ROC curve and rising area (ABCR) and (ii) the test for not proper ROC curves (TNRC). We found our methodology more comprehensive, because it detects both bimodal and multimodal distributions and different variances can be considered on both samples. Another advantage of our method is that we can analyze graphically the behavior of different kinds of differentially expressed genes. Conclusion: Our results indicate that the arrow plot represents a new flexible and useful tool for the analysis of gene expression profiles from microarrays.

Monitorization of alveolar deposited surface area of nanoparticles and ultrafine particles in different environments

Nanotechnology is an important emerging industry with a projected annual market of around one trillion dollars by 2015. It involves the control of atoms and molecules to create new materials with a variety of useful functions. Although there are advantages on the utilization of these nano-scale materials, questions related with its impact over the environment and human health must be addressed too, so that potential risks can be limited at early stages of development. At this time, occupational health risks associated with manufacturing and use of nanoparticles are not yet clearly understood. However, workers may be exposed to nanoparticles through inhalation at levels that can greatly exceed ambient concentrations. Current workplace exposure limits are based on particle mass, but this criteria could not be adequate in this case as nanoparticles are characterized by very large surface area, which has been pointed out as the distinctive characteristic that could even turn out an inert substance into another substance exhibiting very different interactions with biological fluids and cells. Therefore, it seems that, when assessing human exposure based on the mass concentration of particles, which is widely adopted for particles over 1 μm, would not work in this particular case. In fact, nanoparticles have far more surface area for the equivalent mass of larger particles, which increases the chance they may react with body tissues. Thus, it has been claimed that surface area should be used for nanoparticle exposure and dosing. As a result, assessing exposure based on the measurement of particle surface area is of increasing interest. It is well known that lung deposition is the most efficient way for airborne particles to enter the body and cause adverse health effects. If nanoparticles can deposit in the lung and remain there, have an active surface chemistry and interact with the body, then, there is potential for exposure. It was showed that surface area plays an important role in the toxicity of nanoparticles and this is the metric that best correlates with particle-induced adverse health effects. The potential for adverse health effects seems to be directly proportional to particle surface area. The objective of the study is to identify and validate methods and tools for measuring nanoparticles during production, manipulation and use of nanomaterials.

Efficient aggregate computations in large-scale dense WSN

We focus on large-scale and dense deeply embedded systems where, due to the large amount of information generated by all nodes, even simple aggregate computations such as the minimum value (MIN) of the sensor readings become notoriously expensive to obtain. Recent research has exploited a dominance-based medium access control(MAC) protocol, the CAN bus, for computing aggregated quantities in wired systems. For example, MIN can be computed efficiently and an interpolation function which approximates sensor data in an area can be obtained efficiently as well. Dominance-based MAC protocols have recently been proposed for wireless channels and these protocols can be expected to be used for achieving highly scalable aggregate computations in wireless systems. But no experimental demonstration is currently available in the research literature. In this paper, we demonstrate that highly scalable aggregate computations in wireless networks are possible. We do so by (i) building a new wireless hardware platform with appropriate characteristics for making dominance-based MAC protocols efficient, (ii) implementing dominance-based MAC protocols on this platform, (iii) implementing distributed algorithms for aggregate computations (MIN, MAX, Interpolation) using the new implementation of the dominance-based MAC protocol and (iv) performing experiments to prove that such highly scalable aggregate computations in wireless networks are possible.

The contribution of multitemporal information from multispectral satellite images for automatic land cover classification at the national scale

Thesis submitted to the Instituto Superior de Estatística e Gestão de Informação da Universidade Nova de Lisboa in partial fulfillment of the requirements for the Degree of Doctor of Philosophy in Information Management – Geographic Information Systems

Multi-scale vegetation classification using earth observation data of the Sundarban mangrove forest, Bangladesh.

Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Psychosocial Morbidity and its Correlates in Cancer Patients of the Mediterranean Area: Findings from the Southern European Psycho-Oncology Study

BACKGROUND: A few and partial data are available on psychosocial morbidity among cancer patients in Mediterranean countries. As a part of a more general investigation (Southern European Psycho-Oncology Study-SEPOS), the rate of psychosocial morbidity and its correlation with clinical and cultural variables were examined in cancer patients in Italy, Portugal and Spain. METHODS: A convenience sample of cancer outpatients with good performance status and no cognitive impairment were approached. The Hospital Anxiety-Depression scale (HAD-S), the Mini-Mental Adjustment to Cancer scale (Mini-MAC), and the Cancer Worries Inventory (CWI) were used to measure psychological morbidity, coping strategies and concerns about illness. RESULTS: Of 277 patients, 34% had pathological scores ("borderline cases" plus "true cases") on HAD-S Anxiety and 24.9% on HAD-S Depression. Total psychiatric "caseness" was 28.5% and 16.6%, according to different HAD cut-offs (14 and 19, respectively). Significant relationships of HAD-S Anxiety, HAD-S Depression, HAD-S Total score, with Mini-MAC Hopeless and Anxious Preoccupation, and CWI score were found. No differences emerged between countries on psychosocial morbidity, while some differences emerged between the countries on coping mechanisms. Furthermore, Fatalism, Avoidance and marginally Hopeless were higher compared to studies carried out in English-speaking countries. LIMITATIONS: The relatively small sample size and the good performance status prevent us to generalize data on patients with different cancer sites and advanced phase of illness. CONCLUSIONS: One-third of the patients presented anxiety and depressive morbidity, with significant differences in characteristics of coping in Mediterranean countries in comparison with English-speaking countries.

Development of an Unmanned Capsule for large-scale maritime search and rescue

This paper describes the development and testing of a robotic capsule for search and rescue operations at sea. This capsule is able to operate autonomously or remotely controlled, is transported and deployed by a larger USV into a determined disaster area and is used to carry a life raft and inflate it close to survivors in large-scale maritime disasters. The ultimate goal of this development is to endow search and rescue teams with tools that extend their operational capability in scenarios with adverse atmospheric or maritime conditions.

Dimensionar a logística interna da fábrica Toyota Ovar para a produção de nova viatura

O projeto foi realizado na Toyota (divisão fabril de Ovar), no ano letivo 2014/2015, teve por base um estágio extracurricular que foi realizado para que desta forma tomasse contacto com uma realidade concreta e absoluta no contexto empresarial. O estágio serviu, principalmente, como uma experiência na compreensão do funcionamento de uma indústria de automóveis. Este projeto desenvolve-se no âmbito do 2ºano do Mestrado de Logística e apresenta os contributos desenvolvidos no departamento de logística para a reorganização da mesma para a produção de um novo modelo automóvel. Atualmente, a Toyota, para os modelos de automóveis que produz, recebe os componentes em CKD (Completed Knocked Down) provenientes do Japão em lotes de cinco unidades. Estes lotes são armazenados no armazém, de onde só saem quando for dada ordem para serem produzidos. Cada lote tem várias caixas, que são colocadas à vez numa zona comum de abertura. São retidos os componentes das caixas CKD e colocados nos transportadores próprios dos postos correspondentes (supermercado de linha). Isto significa que sempre que é solicitado uma viatura de um determinado lote, são obrigados a produzir as cinco unidades. Isto significa que as restantes unidades do lote terão que ficar em parque aberto a aguardar venda futura, para além de ter um stock desnecessário, estas unidades ficam vulneráveis e sofrem desgaste, pois estão expostas à intempérie, causando graves problemas de qualidade e respetivos custos associados. Recentemente, foi decidida a produção do modelo Land Cruiser 70 na unidade industrial de Ovar, Portugal, o que obrigou a uma reorganização da produção e processos logísticos para a sua produção. Os objetivos que a empresa pretende com a entrada de um novo projeto Land Cruiser 70, são os seguintes: Alterar o sistema de abastecimento, implementando o abastecimento unitário em toda a fábrica para o novo modelo, garantindo o “one by one production”; Definir o funcionamento do processo logístico desde a chegada dos componentes até ficarem disponíveis no supermercado de linha. Para isso será necessário dimensionar armazém e zona de abertura, definir layouts e quantidade de stocks, bem como definir sistemas de comunicação entre abertura e supermercado; Verificar as peças que vão fazer parte do chassi por posto e contabilizar os dolly´s1 necessários; Fazer o layout de abastecimento da linha do chassi; Calcular o tempo de abertura, de abastecimento e de picking do chassi e de triming. Este projeto tem em conta a política de melhoria contínua de forma a conseguir satisfazer o cliente (ser eficaz) utilizando cada vez menos recursos quer físicos quer humanos (ser eficiente, detetar e eliminar os desperdícios). O presente projeto foi inserido na equipa de melhoria contínua da logística, maioritariamente no chassi. Em termos globais, os objetivos propostos neste estágio foram atingidos com êxito.

Implementation of an IoT-based Sensor Network Integrating IoT-based Sensor Networks with Large-Scale Message Distribution

As technology advances not only do new standards and programming styles appear but also some of the previously established ones gain relevance. In a new Internet paradigm where interconnection between small devices is key to the development of new businesses and scientific advancement there is the need to find simple solutions that anyone can implement in order to allow ideas to become more than that, ideas. Open-source software is still alive and well, especially in the area of the Internet of Things. This opens windows for many low capital entrepreneurs to experiment with their ideas and actually develop prototypes, which can help identify problems with a project or shine light on possible new features and interactions. As programming becomes more and more popular between people of fields not related to software there is the need for guidance in developing something other than basic algorithms, which is where this thesis comes in: A comprehensive document explaining the challenges and available choices of developing a sensor data and message delivery system, which scales well and implements the delivery of critical messages. Modularity and extensibility were also given much importance, making this an affordable tool for anyone that wants to build a sensor network of the kind.

Contributo para a validação da versão portuguesa da Quebec Back Pain Disability Scale : fiabilidade e poder de resposta em utentes com dor lombar crónica

RESUMO: Um dos principais resultados das intervenções de Fisioterapia dirigidas a utentes com Dor Lombar Crónica (DLC) é reduzir a incapacidade funcional. A Quebec Back Pain Disability Scale (QBPDS) é um instrumento amplamente aceite a nível internacional na medição do nível de incapacidade funcional reportada pelos indivíduos com DLC. O objetivo deste estudo é dar um contributo para a adaptação cultural da versão portuguesa da QBPDS (QBPDS-VP) e investigar o poder de resposta e interpretabilidade da escala. Metodologia: Realizou-se um estudo metodológico, multicentro, baseado num coorte prospetivo de 132 utentes com DLC. Os utentes foram recrutados a partir da lista de espera de 16 serviços de Medicina Física e de Reabilitação/Fisioterapia de várias áreas geográficas de Portugal. A QBPDS- VP foi administrada 3 vezes, em 3 momentos de recolha de dados distintos: T0 - momento inicial (utentes em lista de espera); T1 - 1 semana de intervalo (início dos tratamentos de Fisioterapia); e T2 - 6 semanas de intervalo (pós-intervenção de Fisioterapia). Os dados recolhidos em T0 foram utilizados para a análise fatorial e para o estudo da consistência interna (n=132); os dados da amostra emparelhada de T0 e T1 (n=132) para a fiabilidade teste-reteste; e os dados da amostra emparelhada de T0 e T2 (n=120) para a análise do poder de resposta e interpretabilidade. A âncora externa utilizada foi a perceção global de mudança, neste caso a PGIC- VP, que foi respondida em T1 e T2. O nível de significância para o qual os valores se consideraram satisfatórios foi de p≤ 0,05. O tratamento dos dados foi realizado no software IBM SPSS Statistics (versão 20). Resultados: A QBPDS- VP é uma escala unidimensional, que revela uma excelente consistência interna (α de Cronbach= 0,95) e uma fiabilidade teste-reteste satisfatória (CCI= 0,696; IC 95%: 0,581–0,783). Esta escala demonstrou um poder de resposta moderado, quando aplicada em utentes com DLC ( = 0,426 e AAC= 0,741; IC 95%: 0,645 – 0,837). A Diferença Mínima Detetável (DMD) estimada foi de 19 pontos e as estimativas da Diferença Mínima Clinicamente Importante (DMCI) variaram entre 7 (pelo método curva ROC) e 8 pontos (pelo método “diferença média de pontuação”). A estimativa pela curva ROC deriva do ponto ótimo de corte de 6,5 pontos, com Área Abaixo da Curva (AAC)= 0,741, sensibilidade de 72%, e especificidade de 71%. Uma análise complementar da curva ROC baseada nas diferenças de pontuações da QBPDS, expressa em percentagem, revelou um ponto ótimo de corte de - 24% (AAC= 0,737, sensibilidade de 71%, e especificidade de 71%). Para pontuações iniciais da QBPDS- VP mais altas (≥34 pontos), foi encontrado um ponto ótimo de corte de 10,5 pontos (AAC= 0,738, sensibilidade de 73%, e especificidade de 67%). Conclusão: A QBPDS-VP demonstrou bons níveis de fiabilidade e poder de resposta, recomendando-se o seu uso na medição e avaliação da incapacidade funcional de utentes com DLC. A DMD estimada, de 19 pontos, determinou uma amplitude válida da QBPDS-VP de 19 a 81 pontos. Este estudo propõe estimativas de DMCI da QBPDS- VP numa aplicação específica da escala (em utentes com DLC que são referidos para a intervenção de Fisioterapia). A pontuação inicial da QBPDS- VP deve ser considerada na interpretação de mudanças de pontuação, após a intervenção de Fisioterapia.------------ ABSTRACT: One of the main results of physiotherapy interventions for patients with Chronic Low Back Pain (CLBP) is decrease the functional disability. The Quebec Back Pain Disability Scale (QBPDS) is an instrument widely accepted internationally, in measuring the level of disability reported by individuals with CLBP. The purpose of this study is to contribute to the cultural adaptation of the Portuguese version of QBPDS (QBPDS - PV) and investigate the Responsiveness and Interpretability of QBPDS-PV. Methodology: This was a methodological and multicenter study, based on a sample of 132 subjects with CLBP. The patients were recruited from the waiting lists of 16 medicine rehabilitation service, in many Portugal districts. The Quebec Back Pain Disability Scale was administered in three different moments: T0 – baseline (patients in the waiting list); T1- one week after T0 (the beginning of treatment); and T2 – six weeks after T1 (the posttreatment). The data collected at T0 were used for factor analysis and to study the internal consistency (n = 132); paired sample data of T0 and T1 (n=132) were used for test-retest reliability, and sample data paired for T0 and T2 (n=120) used for responsiveness and interpretability analysis. The external anchor was the global perception of change, measured by the Portuguese version of Patient’s Global Impression of Change (PGIC) Scale. The minimal level of significance established was p ≤ 0,05. Data analysis was performed using the IBM SPSS Statistics software (version 20). Results: The QBPDS-PV is a unidimensional scale, demonstrates an excellent internal consistency (Cronbach's α=0.95) and satisfactory test-retest reliability (ICC= 0.696, 95% CI: 0.581–0.783). The scale revealed moderate responsiveness when applied to patients with CLBP ( = 0.426 and AUC= 0.741, 95% CI: 0.645 - 0.837). The Smallest Detectable Change (SDC) was 19 points, whereas the Minimal Clinically Important Change (MCIC) ranged between 7 (ROC curve method) and 8 points (by the "mean difference score"). The estimate was derived from the ROC curve by an optimal cutoff point of 6.5 points, with Area Under the Curve (AUC)= 0.741, sensitivity 72%, and specificity of 71%. A complementary analysis of the ROC curve based on differences in QBPDS scores from baseline, expressed in percentage, revealed an optimal cutoff point of -24% (AUC= 0.737, sensitivity of 71%, and specificity of 71%). For the highest initial scores of QBPDS-PV (≥ 34 points) was found an optimal cutoff of 10.5 points (AUC= 0.738, sensitivity of 73%, and specificity 67%). Conclusion: The QBPDS-PV demonstrated good levels of reliability and responsiveness, being recommended its use in the measurement and evaluation of disability of patients with CLBP. The SDC of 19 points determined the QBPDS‟ scale width of 19 to 81. This study proposes MCIC values for QBPDS –PV for this specific setting (in CLBP patients who are referred for physiotherapy intervention). The QBPDS –PV baseline score have to be taken into account while interpreting the score change after physiotherapy intervention.

A distributed platform for the volunteer execution of workflows on a local area network

Thesis submitted in fulfilment of the requirements for the Degree of Master of Science in Computer Science

Contributo da curva de débito-volume na detecção da obstrução da via aérea central

RESUMO: Introdução: A obstrução da via aérea central (OVAC) refere-se a um processo patológico que conduz a limitação do fluxo de ar ao nível do espaço glótico e subglótico, traqueia e brônquios principais. O seu correcto diagnóstico e tratamento constituem um território de interesse e preocupação para os profissionais de saúde, e requerem um profundo conhecimento da sua etiologia, fisiologia, diagnóstico e opções terapêuticas dado o potencial em originar significativa morbilidade e mortalidade. A avaliação da OVAC abrange múltiplas vertentes, entre as quais se salienta o componente clínico (sinais e sintomas), a repercussão fisiopatológica (função respiratória) e o estudo imagiológico (TC do tórax e broncoscopia). A compilação destes dados associada à etiologia, constituem factores importantes para estabelecer o prognóstico, determinar a necessidade de tratamento ou delinear uma futura intervenção terapêutica. A broncoscopia é o Gold Standard de avaliação desta condição, mas desde há cerca de 40 anos a curva de débito-volume constitui uma ferramenta não invasiva de detecção de OVAC. Apesar deste método ser utilizado até os nossos dias, poucos têm sido os estudos com o objectivo de verificar a sensibilidade e especificidade da curva de débito-volume na detecção de OVAC, bem como averiguar a relação entre as alterações morfológicas e quantitativas da mesma com a localização, o tipo e o grau da obstrução. Material e Métodos: Entre 1 de Novembro de 2009 e 30 de Abril de 2010, os doentes com indicação para a realização de broncoscopia diagnóstica ou terapêutica na Unidade de Técnicas Invasivas Pneumológicas (UTIP) do Centro Hospitalar Lisboa Norte – Hospital Pulido Valente (CHLN – HPV) foram seleccionados de forma consecutiva de acordo com os critérios de inclusão e exclusão. As avaliações (broncoscopia, curva de débito-volume e avaliação da dispneia) realizaram-se com um intervalo de tempo máximo de sete dias. A broncoscopia flexível foi realizada segundo as normas da British Thoracic Society e as curvas de débito-volume segundo as normas da ATS/ERS TaskForce 2005. Para a avaliação da dispneia recorreu-se à escala de dispneia MRC (Medical Research Council). Um painel de peritos realizou a avaliação da morfologia da curva de débito-volume (sugestiva ou não de OVAC) e um elemento independente a verificação dos critérios quantitativos e morfológicos (variáveis intra e extratorácica e fixa) da curva. O estudo foi aprovado pela Comissão de Ética para a Saúde do CHLN e todos os doentes assinaram um consentimento informado de participação. Resultados: Estudaram-se 82 doentes, 36 (44%) dos quais com OVAC. A predominância foi do género masculino, em relação ao feminino. A sensibilidade e especificidade dos critérios quantitativos da curva de débito-volume na detecção de OVAC foi de 91.3% e 88.9% respectivamente. Quando se utilizaram os critérios morfológicos da curva de débito-volume os valores foram de 93.5% e 30.6%. A agregação dos critérios morfológicos e quantitativos permitiu alcançar uma sensibilidade de 95.7% e especificidade de 86.1%. Nesta amostra, o critério quantitativo com maior ocorrência foi o FEF50/FIF50≥1 (83% dos doentes com OVAC). Este mostrou relacionar-se com todas as localizações de obstrução excepto o terço médio da traqueia. Mostrou, ainda, ter uma relação forte e positiva com o grau e tipo de obstrução (intra e extraluminal). O segundo foi o FEV1/PEF≥8, presente em 36% dos casos de OVAC. Relacionou-se com as obstruções no terço inferior da traqueia e brônquio principal direito (BPD). Também apresentou relação forte e positiva com o grau de obstrução e com os tipos de obstrução anteriormente descritos. Quanto à sintomatologia foi possível associar o grau de obstrução com o de dispneia e a presença de estridor com o grau e localização da obstrução na traqueia. Conclusões: Os resultados deste estudo demonstram que os critérios quantitativos da curva de débito-volume têm elevada sensibilidade e especificidade na detecção de OVAC. O critério FEV50/FIF50≥1 tem um bom poder discriminativo na detecção dessa condição, tendo sido relacionado com a localização, o grau e o tipo de obstrução. O critério FEV1/PEF≥8, embora com menor poder discriminativo, também se relaciona com o grau, a localização e o tipo de obstrução. A morfologia da curva tem uma boa sensibilidade mas baixa especificidade na detecção de OVAC, mas a agregação entre os critérios morfológicos e quantitativos aumenta a sensibilidade e especificidade. A dispneia e o estridor foram relacionados com o grau de obstrução e o último com a localização ao nível da traqueia.-------------ABSTRACT: Introduction: Central airway obstruction (CAO) refers to a pathological process that leads to restriction of airflow at the level of the glottis and subglottis, trachea and main bronchi. It’s proper diagnosis and treatment is an area of interest and concern to health professionals, and requires a deep knowledge of its etiology, physiology, diagnosis and treatment options, concerning the potential to cause significant morbidity and mortality. The evaluation of CAO covers multiple aspects: the clinical component (signs and symptoms), the pathophysiological effect (lung function) and the imaging study (bronchoscopy and chest CT). The compilation of this data associated with the etiology, are important for establishing prognosis, determine the need for treatment or outline a future therapeutic intervention. Bronchoscopy is the gold standard for evaluating this condition, but for the last 40 years the flow-volume loop has been used as a noninvasive tool for detecting CAO. Although this method is still in use, only few studies were made in order to verify its sensitivity and specificity in detecting CAO, and investigate the relation between morphological and quantitative changes of the curve to location, type and degree of obstruction. Methods: Between 1st November 2009 and 30th April 2010, patients with indication to perform diagnostic or therapeutic bronchoscopy in Interventional Pulmonology Unit - Hospital Pulido Valente (CHLN - HPV), were selected consecutively according to the inclusion and exclusion criteria. All assessments (bronchoscopy, flow-volume loop and dyspnea) were carried out within a period of seven days. The flexible bronchoscopy was performed according to the standards of the British Thoracic Society and the flow-volume loops in accordance with the standards of the ATS / ERS Taskforce 2005. For the evaluation of dyspnea was used to MRC dyspnea scale (Medical Research Council). A panel of experts evaluated the morphology of flow-volume loop (suggestive or non-suggestive of CAO) and an independent element established the quantitative criteria and morphological (intra and extrathoracic variables and fixed) of the curve. This study was approved by the Ethics Committee for Health CHLN and all the patients signed an informed consent to participate. Results: We’ve studied 82 patients, 36 (44%) of those with CAO. The majority of the patients were males, compared to females. The sensitivity and specificity of the quantitative criteria of the flow-volume curve in detecting CAO was 91.3% and 88.9% respectively. When we used the morphological criteria of flow-volume loop these values were 93.5% and 30.6%. The combination of quantitative and morphological criteria produced values of 95.7% sensitivity and 86.1% specificity. FEF50/FIF50≥1 was the most representative quantitative criterion (83% of patients with CAO) and it was correlated with all sites of obstruction except in the middle third of the trachea. It has shown a strong and positive association with the degree and type of obstruction (intra and extraluminal). The second was the FEV1/PEF ≥ 8, present in 36% of cases of CAO. It could be correlated with the obstruction in the lower third of the trachea and right main bronchus. It also showed a strong positive relation with the degree and types of obstruction described above. Regarding symptoms, we found a link between the degree of obstruction and dyspnea. The presence of stridor was correlated with the location and the degree of obstruction in the trachea. Conclusion: The results of this study demonstrate that the quantitative criteria of the flow-volume loop have a high sensitivity and specificity in detecting CAO. The criterion FEV50/FIF50 ≥ 1 has a good discriminative power to detect this condition and was related to the location, degree and type of obstruction. The criterion FEV1/PEF ≥ 8, although with a weaker discriminative power, also relates to the degree, location and type of obstruction. The morphology of the curve has a good sensitivity but low specificity in detecting CAO although the combination between the morphological and quantitative criteria increases sensitivity and specificity. Dyspnea and stridor were related to the degree of obstruction and the last one with its location in the trachea.

Assessment of schistosomiasis in the semi-arid Northeast region of Brazil: the São Francisco River large-scale water transposition project

Abstract: INTRODUCTION Risk of schistosomiasis expansion to semi-arid northeastern Brazil under the influence of the Integration Project of the São Francisco River (IPSFR) was assessed. METHODS: Stool examinations of schoolchildren, epidemiological investigation, and survey of the local host snail Biomphalaria straminea were performed in five IPSFR municipalities. RESULTS Six of 4,770 examined schoolchildren were egg-positive for Schistosoma mansoni. Biomphalaria straminea was widespread, but not naturally infected with S. mansoni. Snails experimentally exposed to two laboratory S. mansoni strains yielded infection indices of 1-4.5%. CONCLUSIONS: There is evidence of active schistosomiasis transmission in the area; thus, intensive surveillance actions are required.

PRELIMINARY RESULTS OF A LARGE-SCALE TREE INVENTORY OF UPLAND RAIN FOREST IN THE CENTRAL AMAZON

A large-scale inventory of trees > 10cm DBH was conducted in the upland "terra firme" rain forest of the Distrito Agropecuário da SUFRAMA (Manaus Free Zone Authority Agricultural District) approximately 65Km north of the city of Manaus (AM), Srasil. Thegeneral appearance and structure of the forest is described together with local topography and soil texture. Thepreliminary results of the Inventory provide a minimum estimate of 698 tree species in 53 families in the 40Km radius sampled, including 17 undescribed species. Themost numerically abundant families, Lecythidaceae, Leguminosae, 5apotaceae and Burseraceae as also among the most species rich families. One aspect of this diverse assemblage is the proliferation of species within certain genera, Including 26 genera In 17 families with 6 or more species or morphospecies. Most species have very low abundances of less than 1 tree per hectare. While more abundant species do exist at densities ranging up to a mean of 12 trees per ha, many have clumped distributions leading to great variation in local species abundance. The degree of similarity between hectare samples based int the Coefficient of Community similarity Index varies widely over different sample hectares for five ecologically different families. Soil texture apparently plays a significant role In determining species composition in the different one hectare plots examined while results for other variable were less consistent. Greater differences in similarity indices are found for comparisons with a one hectare sample within the same formation approximately 40Km to the south. It is concluded that homogeneity of tree community composition within this single large and diverse yet continuous upland forest formation can not be assumed.