Safer construction : the development of a voluntary code of practice to improve safety performance in the Australian construction industry

In Australia, between 1994 and 2000, 50 construction workers were killed each year as a result of their work, the industry fatality rate, at 10.4 per 100,000 persons, is similar to the national road toll fatality rate and the rate of serious injury is 50% higher than the all industries average. This poor performance represents a significant threat to the industry’s social sustainability. Despite the best efforts of regulators and policy makers at both State and Federal levels, the incidence of death, injury and illness in the Australian construction industry has remained intransigently high, prompting an industry-led initiative to improve the occupational health and safety (OHS) performance of the Australian construction industry. The ‘Safer Construction’ project involves the development of an evidence-based Voluntary Code of Practice for OHS in the industry.

Construction safety in the repair and maintenance sector

Statistics indicate that the percentage of fatal industrial accidents arising from repair, maintenance, minor alteration and addition (RMAA) works in Hong Kong was disturbingly high and was over 56% in 2006. This paper provides an initial report of a research project funded by the Research Grants Council (RGC) of the HKSAR to address this safety issue. The aim of this study is to scrutinize the causal relationship between safety climate and safety performance in the RMAA sector. It aims to evaluate the safety climate in the RMAA sector; examine its impacts on safety performance, and recommend measures to improve safety performance in the RMAA sector. This paper firstly reports on the statistics of construction accidents arising from RMAA works. Qualitative and quantitative research methods applied in conducting the research are dis-cussed. The study will critically review these related problems and provide recommendations for improving safety performance in the RMAA sector.

How to progress forward in improving safety outcomes in the work-related driving field : a review of work-related driving research and development of an intervention framework [Extended abstract]

Road crashes are now the most common cause of work-related injury, death and absence in a number of countries. Given the impact of workrelated driving crashes on social and economic aspects of business and the community, workrelated road safety and risk management has received increasing attention in recent years. However, limited academic research has progressed on improving safety within the work-related driving sector. The aim of this paper is to present a review of work-related driving safety research to date, and provide an intervention framework for the future development and implementation of workrelated driving safety intervention strategies.

Safety effectiveness indicators project workbook

The Safety Effectiveness Indicators (SEI) Project has used extensive research to determine what safety effectiveness measures can be developed by industry, for industry use to improve its safety performance. These indicators can measure how effectively the 13 safety management tasks1 (SMTs) selected for this workbook are undertaken. Currently, positive performance indicators (PPIs) are only able to measure the number of activities undertaken. They do not provide information on whether each activity is being undertaken effectively, and therefore do not provide data which can be used by industry to target areas of focus and improvement. The initial workbook contained six SMTs, and was piloted on various construction sites during August 2008. The workbook was refined through feedback from the pilot, and 13 SMTs were used in a field trial during the months of October, November and December 2008. The project team also carried out 12 focus groups in Brisbane, Canberra, Sydney and Melbourne during April, May and June 2008, and developed an initial format of this workbook through these groups and team workshops. Simplification of the language was a recurring theme, and we have attempted to do this throughout the project. The challenge has been to ensure we keep the descriptions short, to the point and relevant to all companies, without making them too specific. The majority of the construction industry participants also requested an alteration to the scale used, so a ‘Yes’/‘No’/’Not applicable’ format is used in this workbook. This workbook, based on industry feedback, is for use on site by various construction companies and contains 13 SMTs. However, you are invited to personalise the SEI tools to better suit your individual company and workplaces.

Measuring safety effectiveness : literature review

Cohen (1977) reviewed the then current research on occupational safety and stated that both strong company commitment to safety, and communication between all levels of a company are the most influential factors to improving safety. Other relevant factors included careful selection of staff, and early and continuous training throughout the lifetime with the company. These continue to be important factors in OHS today. There has been a continued decrease in the injury rates since Cohen’s review within the Australian construction industry, however, the construction industry has far more injuries and ill-health than the Australian average, with one fatality occurring on average per week in the Australian Construction Industry. The Fatality rate in the building and construction industry remains three times higher than the national average, and 15% of all industry fatalities are in the building and construction industry. In addition the construction industry pays one of the highest workers’ compensation premium rates – in 2001 alone approximately 0.5% ($267 million) of revenue would have to be allocated to the direct cost of 1998/99 compensations (Office of the Federal Safety Commissioner, 2006). Based on these statistics there is a need to measure and improve safety performance within the construction industry.

Exercise and secondary lymphedema : safety, potential benefits, and research issues

Participating in regular physical activity is encouraged following breast cancer (BC) treatment, except for those who have subsequently developed lymphoedema. We designed a randomised controlled trial to investigate the effect of participating in a supervised, mixed-type, moderate-intensity exercise program among women with lymphoedema following breast cancer. Women <76 years who had completed BC treatment at least six months prior and subsequently developed unilateral, upper-limb lymphoedema were randomly allocated to an intervention (n=16) or control (n=16) group. The intervention group (IG) participated in 20 supervised group exercise sessions over 12 weeks, while the control group (CG) was instructed to continue habitual activities. Lymphoedema status was assessed by bioimpedance spectroscopy (impedance ratio between limbs) and perometry (volume difference between limbs). Mean baseline measures were similar for the IG (1.13+0.15 and 337+307ml, respectively) and CG (1.13+0.15 and 377+416ml, respectively) and no changes were observed over time. However, 2 women in the IG no longer had evidence of lymphoedema by study end. Average attendance was over 70% of supervised sessions, and there were no withdrawals. The results indicate that, at worst, exercise does not exacerbate secondary lymphoedema. Women with secondary lymphoedema should be encouraged to be physically active, optimising their physical and psychosocial recovery.

All-terrain vehicle crashes and associated injuries in North Queensland : findings from the Rural and Remote Road Safety Study

Objective: To define characteristics of all-terrain vehicle (ATV) crashes occurring in north Queensland from March 2004 till June 2007 with the exploration of associated risk factors. Design: Descriptive analysis of ATV crash data collected by the Rural and Remote Road Safety Study. Setting: Rural and remote north Queensland. Participants: Forty-two ATV drivers and passengers aged 16 years or over hospitalised at Atherton, Cairns, Mount Isa or Townsville for at least 24 hours as a result of a vehicle crash. Main outcome measures: Demographics of participants, reason for travel, nature of crash, injuries sustained and risk factors associated with ATV crash. Results: The majority of casualties were men aged 16–64. Forty-one per cent of accidents occurred while performing agricultural tasks. Furthermore, 39% of casualties had less than one year’s experience riding ATVs. Over half the casualties were not wearing a helmet at the time of the crash. Common injuries were head and neck and upper limb injuries. Rollovers tended to occur while performing agricultural tasks and most commonly resulted in multiple injuries. Conclusions: Considerable trauma results from ATV crashes in rural and remote north Queensland. These crashes are not included in most general vehicle crash data sets, as they are usually limited to events occurring on public roads. Minimal legislation and regulation currently applies to ATV use in agricultural, recreational and commercial settings. Legislation on safer design of ATVs and mandatory courses for riders is an essential part of addressing the burden of ATV crashes on rural and remote communities.

What do we really know about designing and evaluating road safety advertising? : current knowledge and future challenges

This paper provides much needed consolidation of the available evidence in relation to the design and evaluation of road safety advertising messages. Drawing upon current knowledge, the paper identifies some key challenges for improving both the persuasiveness of messages and the methods utilised to assess their effectiveness. The paper identifies some key message-related and individual difference factors, such as response efficacy, emotion, gender and involvement, which theoretical and empirical evidence has shown to be key determinants of message persuasiveness. In relation to message evaluation, the paper focuses upon research relating to the direct, persuasive role of advertising as opposed to evaluations of the combined effects of advertising and enforcement. The paper reviews methodological limitations of previous studies and gaps in existing knowledge that together limit the ability to draw accurate and comprehensive conclusions regarding message effectiveness. Overall, this paper provides a significant and timely review of what is currently known about road safety advertising design and evaluation.

Changing motorcycle rider safety attitudes and motives for risk taking : process evaluation of a rider training intervention

Risk-taking behaviour by motorcyclists has been shown to contribute to a substantial proportion of road crashes in Australia and abroad. Concern has been expressed that traditional motorcycle licence training programs do not sufficiently address such behaviour. Accordingly, the Three Steps to Safer Riding program was developed to address risk taking behaviour by riders as an adjunct to existing skills-based rider training. The program was designed to be delivered in a one hour classroom session at the start of training, with a 20 minute debrief to revise the key concepts at the end of training. This paper reports on the key training concepts, methodology and implementation of the pilot program with a major rider training organisation in Queensland and presents findings from a process evaluation. The Three Steps to Safer Riding intervention pilot was delivered to 518 learner riders over a three month period. Follow-up focus groups and one interview with intervention participants (N=18) five to eight months after completion of the program suggest that new riders (absolute novices) embraced and internalised many of the intervention concepts. However, some riders who had previous riding experience prior to training stated these issues were common sense, yet still expressed riding styles that were contrary to some of the key intervention messages. This is discussed in terms of raising awareness of risk issues for motorcyclists versus behaviour change. Additionally, interviews conducted with riding instructors are discussed regarding logistical challenges of implementation, training consistency, skills required to deliver the program, support for the program, and student engagement.

The potential for a web based intervention to improve young adult passenger safety

Young drivers aged 17-24 are consistently overrepresented in motor vehicle crashes. Research has shown that a young driver’s crash risk increases when carrying similarly aged passengers, with fatal crash risk increasing two to three fold with two or more passengers. Recent growth in access to and use of the internet has led to a corresponding increase in the number of web based behaviour change interventions. An increasing body of literature describes the evaluation of web based programs targeting risk behaviours and health issues. Evaluations have shown promise for such strategies with evidence for positive changes in knowledge, attitudes and behaviour. The growing popularity of web based programs is due in part to their wide accessibility, ability for personalised tailoring of intervention messages, and self-direction and pacing of online content. Young people are also highly receptive to the internet and the interactive elements of online programs are particularly attractive. The current study was designed to assess the feasibility for a web based intervention to increase the use of personal and peer protective strategies among young adult passengers. An extensive review was conducted on the development and evaluation of web based programs. Year 12 students were also surveyed about their use of the internet in general and for health and road safety information. All students reported internet access at home or at school, and 74% had searched for road safety information. Additional findings have shown promise for the development of a web based passenger safety program for young adults. Design and methodological issues will be discussed.

The effect of road lane width on cyclist safety in urban areas

Research has shown that road lane width impacts on driver behaviour. This literature review provides guidelines to assist in the design, construction and retrofitting of urban roads to accommodate road users' safety requirements. It focuses on the impacts of lane widths on cyclists and motor vehicle safety behaviour. The literature review commenced with a search of library databases. Peer reviewed articles and road authority (local, state and national) reports were reviewed. The majority of studies investigating the effects of lane width on driver behaviour were simulator based, while research into cycling safety involved data collected from actual traffic environments. Results show that marked road lane width influences perceived task difficulty, risk perception and possibly speed choice. The positioning of cyclists in traffic lanes is influenced by the presence of on-road cycling facilities and the total roadway width. The lateral displacement between bicycle and vehicle is smallest when a bicycle facility is present. Lower, or reduced, vehicle speeds play a significant role in improving bicyclist and pedestrian safety. It is also shown that if road lane widths in urban areas were reduced, to a functional width that was less than the current guidelines of 3.5m, it could result in a safer road environment for all road users.

Enhancing road safety for young drivers : how Graduate Driver Licensing initiatives can complement "anti-hooning" legislation

Street racing and associated (hooning) behaviours have attracted increasing concern in recent years. While New Zealand and all Australian jurisdictions have introduced “antihooning” legislation and allocated significant police resources to managing the problem, there is limited evidence of the road safety implications of hooning. However, international and Australian data suggests that drivers charged with a hooning offence tend to be young males who are accompanied by one or more peers, and hooning-related crashes tend to occur at night. In this regard, there is considerable evidence that drivers under the age of 25 are over-represented in crash statistics, and are particularly vulnerable soon after obtaining a Provisional licence, when driving at night, and when carrying peer-aged passengers. The similarity between the nature of hooning offenders, offences and crashes, and road safety risks for young drivers in general, suggests that hooning is an issue that may be viewed as part of the broader young driver problem. Many jurisdictions have recently implemented a range of evidence-based strategies to address young driver road safety, and this paper will present Queensland crash and offence data to highlight the potential benefit of Graduated Driver Licensing initiatives, such as night driving restrictions and peer-aged passenger restrictions, to related road safety issues, including hooning. An understanding of potential flow-on effects is important for evaluations of anti-hooning legislation and Graduated Driver Licensing programs, and may have implications for future law enforcement resource allocation and policy development.