An Efficient Distributed Scheme for Source Routing Protocol in Communication Networks

In this paper, we propose an efficient source routing algorithm for unicast flows, which addresses the scalability problem associated with the basic source routing technique. Simulation results indicate that the proposed algorithm indeed helps in reducing the message overhead considerably, and at the same time it gives comparable performance in terms of resource utilization across a wide range of workloads.

Smoothed functional and Quasi-Newton algorithms for routing in multi-stage queueing network with constraints

We consider the problem of optimal routing in a multi-stage network of queues with constraints on queue lengths. We develop three algorithms for probabilistic routing for this problem using only the total end-to-end delays. These algorithms use the smoothed functional (SF) approach to optimize the routing probabilities. In our model all the queues are assumed to have constraints on the average queue length. We also propose a novel quasi-Newton based SF algorithm. Policies like Join Shortest Queue or Least Work Left work only for unconstrained routing. Besides assuming knowledge of the queue length at all the queues. If the only information available is the expected end-to-end delay as with our case such policies cannot be used. We also give simulation results showing the performance of the SF algorithms for this problem.

Joint Routing, Scheduling and Power Control in Multihop MIMO Networks with MAC and Broadcast Links

We consider the problem of joint routing, scheduling and power control in a multihop wireless network when the nodes have multiple antennas. We focus on exploiting the multiple degrees-of-freedom available at each transmitter and receiver due to multiple antennas. Specifically we use multiple antennas at each node to form multiple access and broadcast links in the network rather than just point to point links. We show that such a generic transmission model improves the system performance significantly. Since the complexity of the resulting optimization problem is very high, we also develop efficient suboptimal solutions for joint routing, scheduling and power control in this setup.

Routing scheme, permutation properties, and optical implementation of a four-shuffle-exchange-based Omega network

The routing scheme and some permutation properties of a four-shuffle-exchange-based Omega network are discussed. The corresponding optical setup, which is composed of 2-D phase spatial light modulators and calcite plates, is proposed and demonstrated through mapping the inputs to a 2-D array. Instead of one shuffle-exchange followed by one switching operation as in ordinary Omega networks, in our presented system, the shuffle interconnection embraced in the switches is accomplished simply by varying the switching structure of each stage. For the proposed polarization-optical modules, the system is compact in structure, efficient in performance, and insensitive to the environment. (C) 1997 Society of Photo-Optical Instrumentation Engineers.

Distribuição geográfica das unidades laboratoriais, cobertura de exames e performance da rede de laboratórios que realiza rastreamento do câncer de colo de útero, segundo municípios do Estado do Rio de Janeiro.

O câncer de colo de útero é o terceiro tipo de neoplasia mais comum em mulheres no estado do Rio de Janeiro, perdendo apenas para câncer de mama e pulmão. Não há informação disponível sobre a qualidade dos exames utilizados para prevenção do câncer do colo do útero nos municípios fluminenses. O trabalho teve como objetivo avaliar a distribuição geográfica das unidades laboratoriais e a cobertura de exames e a performance da rede de laboratórios de citopatologia do estado do Rio de Janeiro, segundo regiões mesopolitanas e municípios, no que diz respeito aos exames citopatológicos realizados no âmbito do SUS, considerando a qualidade, a normalização dos procedimentos e a gestão do laboratório e propor melhorias. A pesquisa usa um desenho de estudo do tipo transversal incluindo dados relativos ao funcionamento dos laboratórios que fazem exame papanicolaou no âmbito do SUS no estado do Rio de Janeiro. Trata-se de um estudo com dados secundários, já coletados para atender a ação de avaliação dos laboratórios de citopatologia no âmbito do SUS, nesse trabalho também é usada a abordagem ecológica para estimar a cobertura dos exames em relação à população-alvo do programa de rastreamento de câncer de colo de útero. A rede de laboratórios de citopatologia do estado do Rio de Janeiro não teve desempenho satisfatório. As regiões que tiveram laboratórios com melhor desempenho foram Baia da Ilha Grande e Baixada Litorânea e aquelas com laboratórios de pior desempenho foram Médio Paraíba e Noroeste. Os critérios avaliados com melhor desempenho foram da dimensão qualidade e o mais fraco desempenho foi observado para os critérios da dimensão normalização. A dimensão de gestão de laboratórios teve desempenho regular. Um relevante achado desse estudo foi a insuficiente qualidade da leitura de lâminas, inclusive procedimentos de releitura, que pode ser explicado pela suposta falta de capacitação dos profissionais em todo o processo exigido desde a identificação, fixação, e formas de encaminhamento do material até a chegada aos laboratórios. Com relação à cobertura, alguns municípios se aproximam do parâmetro (0,30) porém, embora este dado revele a capacidade da rede estadual do rio de Janeiro de ofertar exames, é preciso que ele seja analisado em conjunto com as situações de citologia anterior e tempo da citologia anterior para verificação da periodicidade da oferta e o melhor dimensionamento do alcance da população alvo assim como a abrangência da rede laboratorial de cada município. Conclusão: Os dados mostram repetição desnecessária de exames citopatológicos, o que implica custos injustificados e uma situação ainda mais deficitária de alcance das ações do que tem revelado o indicador razão. Ocorrendo principalmente em regiões com predominância de laboratórios privados. A expansão da cobertura com base na periodicidade recomendada do exame é relevante no quadro estadual encontrado e deve vir associada a iniciativas que garantam a qualidade no processo de coleta e análise do material, bem como a adequada capacitação dos profissionais para adoção de condutas recomendadas para as lesões identificadas.

Adaptive agent-based manufacturing control and its application to flow shop routing control

The manufacturing industry is currently facing unprecedented challenges from changes and disturbances. The sources of these changes and disturbances are of different scope and magnitude. They can be of a commercial nature, or linked to fast product development and design, or purely operational (e.g. rush order, machine breakdown, material shortage etc.). In order to meet these requirements it is increasingly important that a production operation be flexible and is able to adapt to new and more suitable ways of operating. This paper focuses on a new strategy for enabling manufacturing control systems to adapt to changing conditions both in terms of product variation and production system upgrades. The approach proposed is based on two key concepts: (1) An autonomous and distributed approach to manufacturing control based on multi-agent methods in which so called operational agents represent the key physical and logical elements in the production environment to be controlled - for example, products and machines and the control strategies that drive them and (2) An adaptation mechanism based around the evolutionary concept of replicator dynamics which updates the behaviour of newly formed operational agents based on historical performance records in order to be better suited to the production environment. An application of this approach for route selection of similar products in manufacturing flow shops is developed and is illustrated in this paper using an example based on the control of an automobile paint shop.

A Parallel Crossbar Routing Chip for a Shared Memory Multiprocessor

This thesis describes the design and implementation of an integrated circuit and associated packaging to be used as the building block for the data routing network of a large scale shared memory multiprocessor system. A general purpose multiprocessor depends on high-bandwidth, low-latency communications between computing elements. This thesis describes the design and construction of RN1, a novel self-routing, enhanced crossbar switch as a CMOS VLSI chip. This chip provides the basic building block for a scalable pipelined routing network with byte-wide data channels. A series of RN1 chips can be cascaded with no additional internal network components to form a multistage fault-tolerant routing switch. The chip is designed to operate at clock frequencies up to 100Mhz using Hewlett-Packard's HP34 $1.2\\mu$ process. This aggressive performance goal demands that special attention be paid to optimization of the logic architecture and circuit design.

Performance evaluation of the RPL Protocol in fixed and mobile sinks low-power and lossy networks.

Low-Power and Lossy-Network (LLN) are usually composed of static nodes, but the increase demand for mobility in mobile robotic and dynamic environment raises the question how a routing protocol for low-power and lossy-networks such as (RPL) would perform if a mobile sink is deployed. In this paper we investigate and evaluate the behaviour of the RPL protocol in fixed and mobile sink environments with respect to different network metrics such as latency, packet delivery ratio (PDR) and energy consumption. Extensive simulation using instant Contiki simulator show significant performance differences between fixed and mobile sink environments. Fixed sink LLNs performed better in terms of average power consumption, latency and packet delivery ratio. The results demonstrated also that RPL protocol is sensitive to mobility and it increases the number of isolated nodes.

Evaluation of a Load Profiling Approach to Routing Guaranteed Bandwidth Flows

To support the diverse Quality of Service (QoS) requirements of real-time (e.g. audio/video) applications in integrated services networks, several routing algorithms that allow for the reservation of the needed bandwidth over a Virtual Circuit (VC) established on one of several candidate routes have been proposed. Traditionally, such routing is done using the least-loaded concept, and thus results in balancing the load across the set of candidate routes. In a recent study, we have established the inadequacy of this load balancing practice and proposed the use of load profiling as an alternative. Load profiling techniques allow the distribution of "available" bandwidth across a set of candidate routes to match the characteristics of incoming VC QoS requests. In this paper we thoroughly characterize the performance of VC routing using load profiling and contrast it to routing using load balancing and load packing. We do so both analytically and via extensive simulations of multi-class traffic routing in Virtual Path (VP) based networks. Our findings confirm that for routing guaranteed bandwidth flows in VP networks, load balancing is not desirable as it results in VP bandwidth fragmentation, which adversely affects the likelihood of accepting new VC requests. This fragmentation is more pronounced when the granularity of VC requests is large. Typically, this occurs when a common VC is established to carry the aggregate traffic flow of many high-bandwidth real-time sources. For VP-based networks, our simulation results show that our load-profiling VC routing scheme performs better or as well as the traditional load-balancing VC routing in terms of revenue under both skewed and uniform workloads. Furthermore, load-profiling routing improves routing fairness by proactively increasing the chances of admitting high-bandwidth connections.

EGOIST: Overlay Routing Using Selfish Neighbor Selection

A foundational issue underlying many overlay network applications ranging from routing to P2P file sharing is that of connectivity management, i.e., folding new arrivals into an existing overlay, and re-wiring to cope with changing network conditions. Previous work has considered the problem from two perspectives: devising practical heuristics for specific applications designed to work well in real deployments, and providing abstractions for the underlying problem that are analytically tractable, especially via game-theoretic analysis. In this paper, we unify these two thrusts by using insights gleaned from novel, realistic theoretic models in the design of Egoist – a prototype overlay routing system that we implemented, deployed, and evaluated on PlanetLab. Using measurements on PlanetLab and trace-based simulations, we demonstrate that Egoist's neighbor selection primitives significantly outperform existing heuristics on a variety of performance metrics, including delay, available bandwidth, and node utilization. Moreover, we demonstrate that Egoist is competitive with an optimal, but unscalable full-mesh approach, remains highly effective under significant churn, is robust to cheating, and incurs minimal overhead. Finally, we discuss some of the potential benefits Egoist may offer to applications.

Supporting Predicate Routing in DTN over MANET

We consider a Delay Tolerant Network (DTN) whose users (nodes) are connected by an underlying Mobile Ad hoc Network (MANET) substrate. Users can declaratively express high-level policy constraints on how "content" should be routed. For example, content may be diverted through an intermediary DTN node for the purposes of preprocessing, authentication, etc. To support such capability, we implement Predicate Routing [7] where high-level constraints of DTN nodes are mapped into low-level routing predicates at the MANET level. Our testbed uses a Linux system architecture and leverages User Mode Linux [2] to emulate every node running a DTN Reference Implementation code [5]. In our initial prototype, we use the On Demand Distance Vector (AODV) MANET routing protocol. We use the network simulator ns-2 (ns-emulation version) to simulate the mobility and wireless connectivity of both DTN and MANET nodes. We show preliminary throughput results showing the efficient and correct operation of propagating routing predicates, and as a side effect, the performance benefit of content re-routing that dynamically (on-demand) breaks the underlying end-to-end TCP connection into shorter-length TCP connections.

The EGOIST Overlay Routing System

A foundational issue underlying many overlay network applications ranging from routing to peer-to-peer file sharing is that of connectivity management, i.e., folding new arrivals into an existing overlay, and rewiring to cope with changing network conditions. Previous work has considered the problem from two perspectives: devising practical heuristics for specific applications designed to work well in real deployments, and providing abstractions for the underlying problem that are analytically tractable, especially via game-theoretic analysis. In this paper, we unify these two thrusts by using insights gleaned from novel, realistic theoretic models in the design of Egoist – a distributed overlay routing system that we implemented, deployed, and evaluated on PlanetLab. Using extensive measurements of paths between nodes, we demonstrate that Egoist’s neighbor selection primitives significantly outperform existing heuristics on a variety of performance metrics, including delay, available bandwidth, and node utilization. Moreover, we demonstrate that Egoist is competitive with an optimal, but unscalable full-mesh approach, remains highly effective under significant churn, is robust to cheating, and incurs minimal overhead. Finally, we use a multiplayer peer-to-peer game to demonstrate the value of Egoist to end-user applications. This technical report supersedes BUCS-TR-2007-013.

PreDA: Predicate Routing for DTN Architectures over MANET

We consider a Delay Tolerant Network (DTN) whose users (nodes) are connected by an underlying Mobile Ad hoc Network (MANET) substrate. Users can declaratively express high-level policy constraints on how “content” should be routed. For example, content can be directed through an intermediary DTN node for the purposes of preprocessing, authentication, etc., or content from a malicious MANET node can be dropped. To support such content routing at the DTN level, we implement Predicate Routing [1] where high-level constraints of DTN nodes are mapped into low-level routing predicates within the MANET nodes. Our testbed [2] uses a Linux system architecture with User Mode Linux [3] to emulate every DTN node with a DTN Reference Implementation code [4]. In our initial architecture prototype, we use the On Demand Distance Vector (AODV) routing protocol at the MANET level. We use the network simulator ns-2 (ns-emulation version) to simulate the wireless connectivity of both DTN and MANET nodes. Preliminary results show the efficient and correct operation of propagating routing predicates. For the application of content re-routing through an intermediary, as a side effect, results demonstrate the performance benefit of content re-routing that dynamically (on-demand) breaks the underlying end-to-end TCP connections into shorter-length TCP connections.

All-optical routing functionalities

All-optical solutions for switching and routing packet-based traffic are crucial for realizing a truly transparent network. To meet the increasing requirements for higher bandwidth, such optical packet switched networks may require the implementation of digital functions in the physical layer. This scenario stimulated us to research and develop innovative high-speed all-optical storage memories, focusing mainly on bistables whose state switching is triggered by a pulsed clock signal. In clocked devices, a synchronization signal is responsible for controlling the enabling of the bistable. This thesis also presents novel solutions to implement optical logic gates, which are basic building blocks of any processing system and a fundamental element for the development of complex processing functionalities. Most of the proposed schemes developed in this work are based on SOA-MZI structures due to their inherent characteristics such as, high extinction ratio, high operation speed, high integration capability and compactness. We addressed the experimental implementation of an all-optical packet routing scheme, with contention resolution capability, using interconnected SOAMZIs. The impact on the system performance of the reminiscent power of the blocked packets, from the non ideal switching performed by the SOA-MZIs, was also assessed.

Analyse de la performance du système portuaire de l'Arctique canadien

Les changements climatiques amènent des transformations profondes de l’environnement arctique. La diminution de l’étendue de la couverture de glace permet un accès facilité aux ressources naturelles et aux communautés nordiques. Au Canada, la région arctique est caractérisée par une géographie archipélagique et un réseau de transport rudimentaire. Le transport maritime est le mode privilégié pour l’acheminement du fret aux communautés et aux sites industriels de l’Arctique. La littérature scientifique présente des lacunes importantes au sujet de la navigation commerciale dans l’Arctique canadien. Peu d’études portent sur le trafic de ravitaillement en raison de son volume peu élevé et de la faible diversité des types de produits transportés, bien qu’il s’agisse d’une activité grandement significative pour les populations et l’économie du Nord. Cette recherche vise à combler cette lacune en dressant un portrait du transport maritime et de la performance des opérations portuaires dans l’Arctique canadien. L’étude est structurée en quatre parties. Une analyse du trafic et des échanges maritimes est d’abord réalisée sous trois échelles : internationale, nationale et intra-arctique. Ensuite, l’étude de la flotte et des routes fait ressortir la distribution géographique des transporteurs. Puis, la performance des ports est mesurée grâce à des indicateurs et un système de cotation. Finalement, une évaluation des opérations maritimes arctiques est menée par l’entremise d’informations récoltées lors d’entrevues avec les membres de l’industrie maritime, de conférences et de travail de terrain. Les sujets abordés concernent l’évolution de la desserte, les défis posés par la navigation en milieu arctique et le développement des ports du Nord canadien. Les résultats de l’étude mènent à la conclusion que le transport maritime dans l’Arctique est caractérisé par une croissance positive du volume acheminé et une implication profonde des transporteurs dédiés à la desserte nordique, mais des infrastructures portuaires et maritimes sous-développées.