Electrophoretic Deposition of Transparent ZnO Thin Films from Highly Stabilized Colloidal Suspensions

The parameters that control the stability of ZnO-nanoparticles suspensions and their deposition by electrophoretic deposition were studied, so as to organize the assembly and compaction of nanoparticles. The addition of cationic polyelectrolyte - Polyethylenimine (PEI) - with different molecular weights was investigated, in order to study their effectiveness and the influence of the molecular weight of the organic chain on suspensions dispersion. It was found that PEI with the highest molecular weight provided better dispersion conditions. Cathodic EPD was performed under previously optimized suspensions conditions and over electropolished stainless steel substrates. Experimental results showed that the EPD process in these conditions allows obtaining dense transparent ZnO thin films. Deposition times and intensities were optimized by analyzing the resulting thin films characteristics. Finally, the deposits were characterized by FE-SEM, AFM, and different spectroscopic techniques.

Identification of Inositol 1,3,4-Trisphosphate 5-Kinase and Inositol 1,3,4,5-Tetrakisphosphate 6-Kinase in Immature Soybean Seeds

In extracts of immature soybean (Glycine max [L.] Merr.) seeds inositol tetrakisphosphate was formed from [3H]inositol 1,3,4-trisphosphate but not from [3H]inositol 1,4,5-trisphosphate. Inositol 1,3,4-trisphosphate kinase was purified to a specific activity of 3.55 min−1 mg−1 by polyethylenimine clarification and anion-exchange chromatography. The partially purified enzyme converted [3H]inositol 1,3,4-trisphosphate to inositol 1,3,4,5-tetrakisphosphate as the major product and inositol 1,3,4,6- and/or 1,2,3,4-tetrakisphosphate as the minor product. Subsequent experiments revealed a separate inositol 1,3,4,5-tetrakisphosphate 6-kinase activity, which could link these enzymes to inositol hexakisphosphate synthesis via the previously reported inositol 1,3,4,5,6-pentakisphosphate 2-kinase. The apparent Km values for inositol 1,3,4-trisphosphate kinase were 200 ± 0 nm for inositol 1,3,4-trisphosphate and 171 ± 4 μm for ATP, and the reaction was not reversible. The kinetics were such that no activity could be detected using unlabeled inositol 1,3,4-trisphosphate and [γ-32P]ATP, which suggested that other kinases may have been observed when less purified fractions were incubated with radiolabeled ATP. Inositol 1,3,4-trisphosphate kinase was nonspecifically inhibited more than 80% by various inositol polyphosphates at a concentration of 100 μm.

Transient production of recombinant proteins by chinese hamster ovary cells using polyethyleneimine/DNA complexes in combination with microtubule disrupting anti-mitotic agents

We have developed a simple and robust transient expression system utilizing the 25 kDa branched cationic polymer polyethylenimine (PEI) as a vehicle to deliver plasmid DNA into suspension-adapted Chinese hamster ovary cells synchronized in G2/M phase of the cell cycle by anti-mitotic microtubule disrupting agents. The PEI-mediated transfection process was optimized with respect to PEI nitrogen to DNA phosphate molar ratio and the plasmid DNA mass to cell ratio using a reporter construct encoding firefly luciferase. Optimal production of luciferase was observed at a PEI N to DNA P ratio of 10:1 and 5 mug DNA 10(6) cells(-1). To manipulate transgene expression at mitosis, we arrested cells in G2/M phase of the cell cycle using the microtubule depolymerizing agent nocodazole. Using secreted human alkaline phosphatase (SEAP) and enhanced green fluorescent protein (eGFP) as reporters we showed that continued inclusion of nocodazole in cell culture medium significantly increased both transfection efficiency and reporter protein production. In the presence of nocodazole, greater than 90% of cells were eGFP positive 24 h post-transfection and qSEAP was increased almost fivefold, doubling total SEAP production. Under optimal conditions for PEI-mediated transfection, transient production of a recombinant chimeric IgG(4) encoded on a single vector was enhanced twofold by nocodazole, a final yield of approximately 5 mug mL(-1) achieved at an initial viable cell density of 1 x 10(6) cells mL(-1). The glycosylation of the recombinant antibody at Asn(297) was not significantly affected by nocodazole during transient production by this method. (C) 2004 Wiley Periodicals, Inc.

Development of plasmid dna formulations for application as microspheric dna vaccines

The advent of DNA vaccines has heralded a new technology allowing the design and elicitation of immune responses more adequate for a wider range of pathogens. The formulation of these vaccines into the desired dosage forms extends their capability in terms of stability, routes of administration and efficacy. This thesis describes an investigation into the fabrication of plasmid DNA, the active principle of DNA vaccines, into microspheres, based on the tenet of an increased cellular uptake of microparticulate matter by phagocytic cells. The formulation of plasmid DNA into microspheres using two methods, is presented. Formulation of microspheric plasmid DNA using the double emulsion solvent evaporation method and a spray-drying method was explored. The former approach involves formation of a double emulsion, by homogenisation. This method produced microspheres of uniform size and smooth morphology, but had a detrimental effect on the formulated DNA. The spray-drying method resulted in microspheres with an improved preservation of DNA stability. The use of polyethylenimine (PEI) and stearylamine (SA) as agents in the microspheric formulation of plasmid DNA is a novel approach to DNA vaccine design. Using these molecules as model positively-charged agents, their influence on the characteristics of the microspheric formulations was investigated. PEI improved the entrapment efficiency of the plasmid DNA in microspheres, and has minimal effect on either the surface charge, morphology or size distribution of the formulations. Stearylamine effected an increase in the entrapment efficiency and stability of the plasmid DNA and its effect on the micropshere morphology was dependent on the method of preparation. The differences in the effects of the two molecules on microsphere formulations may be attributable to their dissimilar physico-chemical properties. PEI is water-soluble and highly-branched, while SA is hydrophobic and amphipathic. The positive charge of both molecules is imparted by amine functional groups. Preliminary data on the in vivo application of formulated DNA vaccine, using hepatitis B plasmid, showed superior humoral responses to the formulated antigen, compared with free (unformulated) antigen.

Delivery and Scavenging of Nucleic Acids by Polycationic Polymers

Electrostatic interaction is a strong force that attracts positively and negatively charged molecules to each other. Such an interaction is formed between positively charged polycationic polymers and negatively charged nucleic acids. In this dissertation, the electrostatic attraction between polycationic polymers and nucleic acids is exploited for applications in oral gene delivery and nucleic acid scavenging. An enhanced nanoparticle for oral gene delivery of a human Factor IX (hFIX) plasmid is developed using the polycationic polysaccharide, chitosan (Ch), in combination with protamine sulfate (PS) to treat hemophilia B. For nucleic acid scavenging purposes, the development of an effective nucleic acid scavenging nanofiber platform is described for dampening hyper-inflammation and reducing the formation of biofilms.

Non-viral gene therapy may be an attractive alternative to chronic protein replacement therapy. Orally administered non-viral gene vectors have been investigated for more than one decade with little progress made beyond the initial studies. Oral administration has many benefits over intravenous injection including patient compliance and overall cost; however, effective oral gene delivery systems remain elusive. To date, only chitosan carriers have demonstrated successful oral gene delivery due to chitosan’s stability via the oral route. In this study, we increase the transfection efficiency of the chitosan gene carrier by adding protamine sulfate to the nanoparticle formulation. The addition of protamine sulfate to the chitosan nanoparticles results in up to 42x higher in vitro transfection efficiency than chitosan nanoparticles without protamine sulfate. Therapeutic levels of hFIX protein are detected after oral delivery of Ch/PS/phFIX nanoparticles in 5/12 mice in vivo, ranging from 3 -132 ng/mL, as compared to levels below 4 ng/mL in 1/12 mice given Ch/phFIX nanoparticles. These results indicate the protamine sulfate enhances the transfection efficiency of chitosan and should be considered as an effective ternary component for applications in oral gene delivery.

Dying cells release nucleic acids (NA) and NA-complexes that activate the inflammatory pathways of immune cells. Sustained activation of these pathways contributes to chronic inflammation related to autoimmune diseases including systemic lupus erythematosus, rheumatoid arthritis, and inflammatory bowel disease. Studies have shown that certain soluble, cationic polymers can scavenge extracellular nucleic acids and inhibit RNA-and DNA-mediated activation of Toll-like receptors (TLRs) and inflammation. In this study, the cationic polymers are incorporated onto insoluble nanofibers, enabling local scavenging of negatively charged pro-inflammatory species such as damage-associated molecular pattern (DAMP) molecules in the extracellular space, reducing cytotoxicity related to unwanted internalization of soluble cationic polymers. In vitro data show that electrospun nanofibers grafted with cationic polymers, termed nucleic acid scavenging nanofibers (NASFs), can scavenge nucleic acid-based agonists of TLR 3 and TLR 9 directly from serum and prevent the production of NF-ĸB, an immune system activating transcription factor while also demonstrating low cytotoxicity. NASFs formed from poly (styrene-alt-maleic anhydride) conjugated with 1.8 kDa branched polyethylenimine (bPEI) resulted in randomly aligned fibers with diameters of 486±9 nm. NASFs effectively eliminate the immune stimulating response of NA based agonists CpG (TLR 9) and poly (I:C) (TLR 3) while not affecting the activation caused by the non-nucleic acid TLR agonist pam3CSK4. Results in a more biologically relevant context of doxorubicin-induced cell death in RAW cells demonstrates that NASFs block ~25-40% of NF-ĸβ response in Ramos-Blue cells treated with RAW extracellular debris, ie DAMPs, following doxorubicin treatment. Together, these data demonstrate that the formation of cationic NASFs by a simple, replicable, modular technique is effective and that such NASFs are capable of modulating localized inflammatory responses.

An understandable way to clinically apply the NASF is as a wound bandage. Chronic wounds are a serious clinical problem that is attributed to an extended period of inflammation as well as the presence of biofilms. An NASF bandage can potentially have two benefits in the treatment of chronic wounds by reducing the inflammation and preventing biofilm formation. NASF can prevent biofilm formation by reducing the NA present in the wound bed, therefore removing large components of what the bacteria use to develop their biofilm matrix, the extracellular polymeric substance, without which the biofilm cannot develop. The NASF described above is used to show the effect of the nucleic acid scavenging technology on in vitro and in vivo biofilm formation of P. aeruginosa, S. aureus, and S. epidermidis biofilms. The in vitro studies demonstrated that the NASFs were able to significantly reduce the biofilm formation in all three bacterial strains. In vivo studies of the NASF on mouse wounds infected with biofilm show that the NASF retain their functionality and are able to scavenge DNA, RNA, and protein from the wound bed. The NASF remove DNA that are maintaining the inflammatory state of the open wound and contributing to the extracellular polymeric substance (EPS), such as mtDNA, and also removing proteins that are required for bacteria/biofilm formation and maintenance such as chaperonin, ribosomal proteins, succinyl CoA-ligase, and polymerases. However, the NASF are not successful at decreasing the wound healing time because their repeated application and removal disrupts the wound bed and removes proteins required for wound healing such as fibronectin, vibronectin, keratin, and plasminogen. Further optimization of NASF treatment duration and potential combination treatments should be tested to reduce the unwanted side effects of increased wound healing time.

Rôle des protéoglycanes à héparane sulfate dans le transfert de gène des cellules CHO et HEK293

La possibilité de programmer une cellule dans le but de produire une protéine d’intérêt est apparue au début des années 1970 avec l’essor du génie génétique. Environ dix années plus tard, l’insuline issue de la plateforme de production microbienne Escherichia coli, fut la première protéine recombinante (r-protéine) humaine commercialisée. Les défis associés à la production de r-protéines plus complexes et glycosylées ont amené l’industrie biopharmaceutique à développer des systèmes d’expression en cellules de mammifères. Ces derniers permettent d’obtenir des protéines humaines correctement repliées et de ce fait, biologiquement actives. Afin de transférer le gène d’intérêt dans les cellules de mammifères, le polyéthylènimine (PEI) est certainement un des vecteurs synthétiques le plus utilisé en raison de son efficacité, mais aussi sa simplicité d’élaboration, son faible coût et sa stabilité en solution qui facilite son utilisation. Il est donc largement employé dans le contexte de la production de r-protéines à grande échelle et fait l’objet d’intenses recherches dans le domaine de la thérapie génique non virale. Le PEI est capable de condenser efficacement l’ADN plasmidique (vecteur d’expression contenant le gène d’intérêt) pour former des complexes de petites tailles appelés polyplexes. Ces derniers doivent contourner plusieurs étapes limitantes afin de délivrer le gène d’intérêt au noyau de la cellule hôte. Dans les conditions optimales du transfert de gène par le PEI, les polyplexes arborent une charge positive nette interagissant de manière électrostatique avec les protéoglycanes à héparane sulfate (HSPG) qui décorent la surface cellulaire. On observe deux familles d’HSPG exprimés en abondance à la surface des cellules de mammifères : les syndécanes (4 membres, SDC1-4) et les glypicanes (6 membres, GPC1-6). Si l’implication des HSPG dans l’attachement cellulaire des polyplexes est aujourd’hui largement acceptée, leur rôle individuel vis-à-vis de cet attachement et des étapes subséquentes du transfert de gène reste à confirmer. Après avoir optimisées les conditions de transfection des cellules de mammifères CHO et HEK293 dans le but de produire des r-protéines secrétées, nous avons entrepris des cinétiques de capture, d’internalisation des polyplexes et aussi d’expression du transgène afin de mieux comprendre le processus de transfert de gène. Nous avons pu observer des différences au niveau de ces paramètres de transfection dépendamment du système d’expression et des caractéristiques structurelles du PEI utilisé. Ces résultats présentés sous forme d’articles scientifiques constituent une base solide de l’enchaînement dans le temps des évènements essentiels à une transfection efficace des cellules CHO et HEK293 par le PEI. Chaque type cellulaire possède un profil d’expression des HSPG qui lui est propre, ces derniers étant plus ou moins permissifs au transfert de gène. En effet, une étude menée dans notre laboratoire montre que les SDC1 et SDC2 ont des rôles opposés vis-à-vis du transfert de gène. Alors que tous deux sont capables de lier les polyplexes, l’expression de SDC1 permet leur internalisation contrairement à l’expression de SDC2 qui l’inhibe. De plus, lorsque le SDC1 est exprimé à la surface des cellules HEK293, l’efficacité de transfection est augmentée de douze pourcents. En utilisant la capacité de SDC1 à induire l’internalisation des polyplexes, nous avons étudié le trafic intracellulaire des complexes SDC1 / polyplexes dans les cellules HEK293. De plus, nos observations suggèrent une nouvelle voie par laquelle les polyplexes pourraient atteindre efficacement le noyau cellulaire. Dans le contexte du transfert de gène, les HSPG sont essentiellement étudiés dans leur globalité. S’il est vrai que le rôle des syndécanes dans ce contexte est le sujet de quelques études, celui des glypicanes est inexploré. Grâce à une série de traitements chimiques et enzymatiques visant une approche « perte de fonction », l’importance de la sulfatation comme modification post-traductionnelle, l’effet des chaînes d’héparanes sulfates mais aussi des glypicanes sur l’attachement, l’internalisation des polyplexes, et l’expression du transgène ont été étudiés dans les cellules CHO et HEK293. L’ensemble de nos observations indique clairement que le rôle des HSPG dans le transfert de gène devrait être investigué individuellement plutôt que collectivement. En effet, le rôle spécifique de chaque membre des HSPG sur la capture des polyplexes et leur permissivité à l’expression génique demeure encore inconnu. En exprimant de manière transitoire chaque membre des syndécanes et glypicanes à la surface des cellules CHO, nous avons déterminé leur effet inhibiteur ou activateur sur la capture des polyplexes sans pouvoir conclure quant à l’effet de cette surexpression sur l’efficacité de transfection. Par contre, lorsqu’ils sont présents dans le milieu de culture, le domaine extracellulaire des HSPG réduit l’efficacité de transfection des cellules CHO sans induire la dissociation des polyplexes. Curieusement, lorsque chaque HSPG est exprimé de manière stable dans les cellules CHO, seulement une légère modulation de l’expression du transgène a pu être observée. Ces travaux ont contribué à la compréhension des mécanismes d'action du vecteur polycationique polyéthylènimine et à préciser le rôle des protéoglycanes à héparane sulfate dans le transfert de gène des cellules CHO et HEK293.

Design of advanced reverse osmosis and nanofiltration membranes for water purification

Most commercially available reverse osmosis (RO) and nanofiltration (NF) membranes are based on the thin film composite (TFC) aromatic polyamide membranes. However, they have several disadvantages including low resistance to fouling, low chemical and thermal stabilities and limited chlorine tolerance. To address these problems, advanced RO/NF membranes are being developed from polyimides for water and wastewater treatments. The following three projects have resulted from my research. (1) Positively charged and solvent resistant NF membranes. The use of solvent resistant membranes to facilitate small molecule separations has been a long standing industry goal of the chemical and pharmaceutical industries. We developed a solvent resistant membrane by chemically cross-linking of polyimide membrane using polyethylenimine. This membrane showed excellent stability in almost all organic solvents. In addition, this membrane was positively charged due to the amine groups remaining on the surface. As a result, high efficiency (> 95%) and selectivity for multivalent heavy metal removal was achieved. (2) Fouling resistant NF membranes. Antifouling membranes are highly desired for “all” applications because fouling will lead to higher energy demand, increase of cleaning and corresponding down time and reduced life-time of the membrane elements. For fouling prevention, we designed a new membrane system using a coating technique to modify membrane surface properties to avoid adsorption of foulants like humic acid. A layer of water-soluble polymer such as polyvinyl alcohol (PVA), polyacrylic acid (PAA), polyvinyl sulfate (PVS) or sulfonated poly(ether ether ketone) (SPEEK), was adsorbed onto the surface of a positively charged membrane. The resultant membranes have a smooth and almost neutrally charged surface which showed better fouling resistance than both the positively charged NF membranes and commercially available negatively charged NTR-7450 membrane. In addition, these membranes showed high efficiency for removal of multivalent ions (> 95% for both cations and anions). Therefore, these antifouling surfaces can be potentially used for water softening, water desalination and wastewater treatment in a membrane bioreactor (MBR) process. (3) Thermally stable RO membranes. Commercial RO membranes cannot be used at temperature higher than 45°C due to the use of polysulfone substrate, which often limits their applications in industries. We successfully developed polyimides as the membrane substrate for thermally stable RO membranes due to their high thermal resistance. The polyimide-based composite polyamide membranes showed desalination performance comparable to the commercial TFC membrane. However, the key advantage of the polyimide-based membrane is its high thermal stability. As the feed temperature increased from 25oC to 95oC, the water flux increased 5 - 6 times while the salt rejection almost kept constant. This membrane appears to provide a unique solution for hot water desalination and also a feasible way to improve the water productivity by increasing the operating temperature without any drop in salt rejection.

Scaffolds porosos à base de fosfatos de cálcio para regeneração óssea

Graças ao aumento da esperança média de vida do ser humano, a engenharia de tecidos tem sido uma área alvo de enorme investigação. A utilização de estruturas tridimensionais porosas e biodegradáveis, denominadas de scaffolds, como matriz para a adesão e proliferação celular tem sido amplamente investigada. Existem atualmente diversas técnicas para a produção destas estruturas mas o grau de exigência tem vindo a aumentar, existindo ainda lacunas que necessitam ser preenchidas. A técnica de robocasting consiste numa deposição camada a camada de uma pasta coloidal, seguindo um modelo computorizado (CAD) e permite a produção de scaffolds com porosidade tamanho de poro e fração de porosidade controlados, boa reprodutibilidade, e com formas variadas, as quais podem ser idênticas às dos defeitos ósseos a preencher. O presente estudo teve como objetivo produzir scaffolds porosos à base de fosfatos de cálcio através de robocasting. Para tal, foram estudadas duas composições de pós à base de β-TCP, uma pura e outra co-dopada com estrôncio, zinco e manganês. Inicialmente os pós foram sintetizados pelo método de precipitação química por via húmida. Após a síntese, estes foram filtrados, secos, calcinados a 1000ºC e posteriormente moídos até possuírem um tamanho médio de partícula de cerca de 1,5 μm. Os pós foram depois peneirados com uma malha de 40μm e caracterizados. Posteriormente foram preparadas várias suspensões e avaliado o seu comportamento reológico, utilizando Targon 1128 como dispersante, Hidroxipropilmetilcelulose (HPMC) como ligante e polietilenimina (PEI) como agente floculante. Por fim, e escolhida a melhor composição para a formação da pasta, foram produzidos scaffolds com diferentes porosidades, num equipamento de deposição robótica (3D Inks, LLC). Os scaffolds obtidos foram secos à temperatura ambiente durante 48 horas, sinterizados a 1100ºC e posteriormente caracterizados por microscopia eletrónica de varrimento (SEM), avaliação dos tamanhos de poro, porosidade total e testes mecânicos. Ambas as composições estudadas puderam ser transformadas em pastas extrudíveis, mas a pasta da composição pura apresentou uma consistência mais próxima do ideal, tendo originado scaffolds de melhor qualidade em termos de microestrutura e de propriedades mecânicas.

Rôle des protéoglycanes à héparane sulfate dans le transfert de gène des cellules CHO et HEK293

La possibilité de programmer une cellule dans le but de produire une protéine d’intérêt est apparue au début des années 1970 avec l’essor du génie génétique. Environ dix années plus tard, l’insuline issue de la plateforme de production microbienne Escherichia coli, fut la première protéine recombinante (r-protéine) humaine commercialisée. Les défis associés à la production de r-protéines plus complexes et glycosylées ont amené l’industrie biopharmaceutique à développer des systèmes d’expression en cellules de mammifères. Ces derniers permettent d’obtenir des protéines humaines correctement repliées et de ce fait, biologiquement actives. Afin de transférer le gène d’intérêt dans les cellules de mammifères, le polyéthylènimine (PEI) est certainement un des vecteurs synthétiques le plus utilisé en raison de son efficacité, mais aussi sa simplicité d’élaboration, son faible coût et sa stabilité en solution qui facilite son utilisation. Il est donc largement employé dans le contexte de la production de r-protéines à grande échelle et fait l’objet d’intenses recherches dans le domaine de la thérapie génique non virale. Le PEI est capable de condenser efficacement l’ADN plasmidique (vecteur d’expression contenant le gène d’intérêt) pour former des complexes de petites tailles appelés polyplexes. Ces derniers doivent contourner plusieurs étapes limitantes afin de délivrer le gène d’intérêt au noyau de la cellule hôte. Dans les conditions optimales du transfert de gène par le PEI, les polyplexes arborent une charge positive nette interagissant de manière électrostatique avec les protéoglycanes à héparane sulfate (HSPG) qui décorent la surface cellulaire. On observe deux familles d’HSPG exprimés en abondance à la surface des cellules de mammifères : les syndécanes (4 membres, SDC1-4) et les glypicanes (6 membres, GPC1-6). Si l’implication des HSPG dans l’attachement cellulaire des polyplexes est aujourd’hui largement acceptée, leur rôle individuel vis-à-vis de cet attachement et des étapes subséquentes du transfert de gène reste à confirmer. Après avoir optimisées les conditions de transfection des cellules de mammifères CHO et HEK293 dans le but de produire des r-protéines secrétées, nous avons entrepris des cinétiques de capture, d’internalisation des polyplexes et aussi d’expression du transgène afin de mieux comprendre le processus de transfert de gène. Nous avons pu observer des différences au niveau de ces paramètres de transfection dépendamment du système d’expression et des caractéristiques structurelles du PEI utilisé. Ces résultats présentés sous forme d’articles scientifiques constituent une base solide de l’enchaînement dans le temps des évènements essentiels à une transfection efficace des cellules CHO et HEK293 par le PEI. Chaque type cellulaire possède un profil d’expression des HSPG qui lui est propre, ces derniers étant plus ou moins permissifs au transfert de gène. En effet, une étude menée dans notre laboratoire montre que les SDC1 et SDC2 ont des rôles opposés vis-à-vis du transfert de gène. Alors que tous deux sont capables de lier les polyplexes, l’expression de SDC1 permet leur internalisation contrairement à l’expression de SDC2 qui l’inhibe. De plus, lorsque le SDC1 est exprimé à la surface des cellules HEK293, l’efficacité de transfection est augmentée de douze pourcents. En utilisant la capacité de SDC1 à induire l’internalisation des polyplexes, nous avons étudié le trafic intracellulaire des complexes SDC1 / polyplexes dans les cellules HEK293. De plus, nos observations suggèrent une nouvelle voie par laquelle les polyplexes pourraient atteindre efficacement le noyau cellulaire. Dans le contexte du transfert de gène, les HSPG sont essentiellement étudiés dans leur globalité. S’il est vrai que le rôle des syndécanes dans ce contexte est le sujet de quelques études, celui des glypicanes est inexploré. Grâce à une série de traitements chimiques et enzymatiques visant une approche « perte de fonction », l’importance de la sulfatation comme modification post-traductionnelle, l’effet des chaînes d’héparanes sulfates mais aussi des glypicanes sur l’attachement, l’internalisation des polyplexes, et l’expression du transgène ont été étudiés dans les cellules CHO et HEK293. L’ensemble de nos observations indique clairement que le rôle des HSPG dans le transfert de gène devrait être investigué individuellement plutôt que collectivement. En effet, le rôle spécifique de chaque membre des HSPG sur la capture des polyplexes et leur permissivité à l’expression génique demeure encore inconnu. En exprimant de manière transitoire chaque membre des syndécanes et glypicanes à la surface des cellules CHO, nous avons déterminé leur effet inhibiteur ou activateur sur la capture des polyplexes sans pouvoir conclure quant à l’effet de cette surexpression sur l’efficacité de transfection. Par contre, lorsqu’ils sont présents dans le milieu de culture, le domaine extracellulaire des HSPG réduit l’efficacité de transfection des cellules CHO sans induire la dissociation des polyplexes. Curieusement, lorsque chaque HSPG est exprimé de manière stable dans les cellules CHO, seulement une légère modulation de l’expression du transgène a pu être observée. Ces travaux ont contribué à la compréhension des mécanismes d'action du vecteur polycationique polyéthylènimine et à préciser le rôle des protéoglycanes à héparane sulfate dans le transfert de gène des cellules CHO et HEK293.

Removal of copper ions from aqueous solution by adsorption onto novel polyelectrolyte film-coated nanofibrous silk fibroin non-wovens

In this approach, polyelectrolyte film-coated nanofibrous silk fibroin (SF) nonwovens were prepared from the alternate deposition of positively charged polyethylenimine (PEI) and negatively charged SF using electrostatic layer-by-layer (LBL) self-assembled technology. The composite membranes were characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectrometer. The SF-PEI multilayer-assembled nanofibers (less than five layers) were fine and uniform with the fiber diameter from 400 nm to 600 nm, and had very large surface area and high porosity (more than 70%). The amino groups of PEI were proved to be deposited onto SF nonwovens, which granted the coated nonwovens with potential applicability for copper ions adsorption. The PEI films coated SF substrate showed much higher copper ions adsorption capacity than that of ethanol treated SF nanofibers. Adding the number of PEI coated could enhance the Cu²⁺ adsorption capacity significantly. The maximum milligrams per gram of copper ions adsorbed reached 59.7 mg/g when the SF substrate was coated with 5 bilayers of SF-PEI. However, the copper ions adsorption capacity had no obvious change as the number of PEI continued to increase. These results suggest potential for PEL film-coated nanofibrous nonwovens as a new adsorbent for metal ions.

Efficiency of chitosan and their combination with bentonite as retention aids in papermaking

In a previous work (Nicu et al. 2013), the flocculation efficiency of three chitosans differing by molecular weight and charge density were evaluated for their potential use as wet end additives in papermaking. According to the promising results obtained, chitosan (single system) and its combination with bentonite (dual system) were evaluated as retention aids, and their efficiency was compared with poly(diallyl dimethyl ammonium chloride) (PDADMAC) and polyethylenimine (PEI). In single systems, chitosan was clearly more efficient in drainage rate than PDADMAC and PEI, especially those with the lowest molecular weights; however, retention is considerably lower. This drawback can be overcome by using dual systems with anionic bentonite microparticles, with the optimum ratio of polymer:bentonite being 1:4 (wt./wt.). In dual systems, the differences in retention were almost negligible, and the difference in drainage rate was even higher, together with better floc reversibility. The most efficient chitosan in single systems was Ch.MMW, while Ch.LMW was the most efficient in dual systems. The flocculation mechanism of chitosan was a combination of patch formation, charge neutralization, and partial bridge formation, and the predominant mechanism depended on the molecular weight and charge density of the chitosan.