Computer-aided volume measurement of posttraumatic orbits reconstructed with AO titanium mesh plates: accuracy and reliability

PURPOSE: To prospectively evaluate the accuracy and reliability of "freehand" posttraumatic orbital wall reconstruction with AO (Arbeitsgemeinschaft Osteosynthese) titanium mesh plates by using computer-aided volumetric measurement of the bony orbits. METHODS: Bony orbital volume was measured in 12 patients from coronal CT scan slices using OsiriX Medical Image software. After defining the volumetric limits of the orbit, the segmentation of the bony orbital region of interest of each single slice was performed. At the end of the segmentation process, all regions of interest were grouped and the volume was computed. The same procedure was performed on both orbits, and thereafter the volume of the contralateral uninjured orbit was used as a control for comparison. RESULTS: In all patients, the volume data of the reconstructed orbit fitted that of the contralateral uninjured orbit with accuracy to within 1.85 cm3 (7%). CONCLUSIONS: This preliminary study has demonstrated that posttraumatic orbital wall reconstruction using "freehand" bending and placement of AO titanium mesh plates results in a high success rate in re-establishing preoperative bony volume, which closely approximates that of the contralateral uninjured orbit.

Comparison of three separate antiadhesive barriers for intraperitoneal onlay mesh hernia repair in an experimental model (Br J Surg 2011; 98: 442-449).

The Editors welcome topical correspondence from readers relating to articles published in the Journal. Responses should be sent electronically via the BJS website (www.bjs.co.uk). All letters will be reviewed and, if approved, appear on the website. A selection of these will be edited and published in the Journal. Letters must be no more than 250 words in length.

The use of external mesh reinforcement to reduce intimal hyperplasia and preserve the structure of human saphenous veins.

The saphenous vein is the conduit of choice in bypass graft procedures. Haemodynamic factors play a major role in the development of intimal hyperplasia (IH), and subsequent bypass failure. To evaluate the potential protective effect of external reinforcement on such a failure, we developed an ex vivo model for the perfusion of segments of human saphenous veins under arterial shear stress. In veins submitted to pulsatile high pressure (mean pressure at 100 mmHg) for 3 or 7 days, the use of an external macroporous polyester mesh 1) prevented the dilatation of the vessel, 2) decreased the development of IH, 3) reduced the apoptosis of smooth muscle cells, and the subsequent fibrosis of the media layer, 4) prevented the remodelling of extracellular matrix through the up-regulation of matrix metalloproteinases (MMP-2, MMP-9) and plasminogen activator type I. The data show that, in an experimental ex vivo setting, an external scaffold decreases IH and maintains the integrity of veins exposed to arterial pressure, via increase in shear stress and decrease wall tension, that likely contribute to trigger selective molecular and cellular changes.

Implantación de un modelo de red abierta tipo mesh para propagar el acceso libre al servicio de biblioteca y contenidos abiertos

Implantación de un modelo de red abierta tipo mesh para propagar el acceso libre al servicio de biblioteca y contenidos abiertos.

Oferta de trabajo y análisis impositivo con el ordenador: tutorial y actividad práctica

En el presente documento proponemos un ejercicio tutorial y una práctica docente que permita al estudiante a asimilar y entender mejor el concepto de exceso de gravamen o pérdida irrecuperable de eficiencia asociada a la imposición. Para ello planteamos, en primer lugar, un modelo de elección individual entre ocio y trabajo/consumo. Centrándonos en el individuo representativo, estudiamos su elección de horas de trabajo en ausencia de impuestos. A continuación, introducimos un impuesto proporcional sobre la renta del trabajo y, alternativamente, un impuesto de suma fija capaz de generar una recaudación igual. Verificamos que el impuesto proporcional siempre deja al individuo con un nivel de bienestar inferior respecto al escenario del impuesto de suma fija, es decir, que el impuesto proporcional genera una pérdida irrecuperable de eficiencia. Aunque la resolución manual del problema es factible, proponemos utilizar la herramienta Solver de Excel. Esto nos permite jugar de manera más ágil con los valores de los diferentes parámetros y verificar que hay pérdida de eficiencia independientemente de que el individuo decida trabajar más o menos horas en respuesta a la introducción del impuesto sobre la renta del trabajo

Quimiometria I: calibração multivariada, um tutorial

The aim of this work is to present a tutorial on Multivariate Calibration, a tool which is nowadays necessary in basically most laboratories but very often misused. The basic concepts of preprocessing, principal component analysis (PCA), principal component regression (PCR) and partial least squares (PLS) are given. The two basic steps on any calibration procedure: model building and validation are fully discussed. The concepts of cross validation (to determine the number of factors to be used in the model), leverage and studentized residuals (to detect outliers) for the validation step are given. The whole calibration procedure is illustrated using spectra recorded for ternary mixtures of 2,4,6 trinitrophenolate, 2,4 dinitrophenolate and 2,5 dinitrophenolate followed by the concentration prediction of these three chemical species during a diffusion experiment through a hydrophobic liquid membrane. MATLAB software is used for numerical calculations. Most of the commands for the analysis are provided in order to allow a non-specialist to follow step by step the analysis.

G+: Enhanced Traffic Grooming in WDM Mesh Networks using Lighttours

In this article, a new technique for grooming low-speed traffic demands into high-speed optical routes is proposed. This enhancement allows a transparent wavelength-routing switch (WRS) to aggregate traffic en route over existing optical routes without incurring expensive optical-electrical-optical (OEO) conversions. This implies that: a) an optical route may be considered as having more than one ingress node (all inline) and, b) traffic demands can partially use optical routes to reach their destination. The proposed optical routes are named "lighttours" since the traffic originating from different sources can be forwarded together in a single optical route, i.e., as taking a "tour" over different sources towards the same destination. The possibility of creating lighttours is the consequence of a novel WRS architecture proposed in this article, named "enhanced grooming" (G+). The ability to groom more traffic in the middle of a lighttour is achieved with the support of a simple optical device named lambda-monitor (previously introduced in the RingO project). In this article, we present the new WRS architecture and its advantages. To compare the advantages of lighttours with respect to classical lightpaths, an integer linear programming (ILP) model is proposed for the well-known multilayer problem: traffic grooming, routing and wavelength assignment The ILP model may be used for several objectives. However, this article focuses on two objectives: maximizing the network throughput, and minimizing the number of optical-electro-optical conversions used. Experiments show that G+ can route all the traffic using only half of the total OEO conversions needed by classical grooming. An heuristic is also proposed, aiming at achieving near optimal results in polynomial time

Estudi i implementació pràctica d'una xarxa Wifi Mesh

En el projecte ens centrarem en el funcionament de les Xarxes mallades sense fils, es fa una breu explicació de les xarxes Ad-hoc, ja que aquestes formen un part important dintre d’una xarxa Mesh. S’explicaran diversos protocols d’enrutament com ara BATMAN, AODV, 802.11s i OLSR. Aquest últim és el que utilitzarem per a la configuració de la xarxa que realitzarem. S’explicarà el tipus de paquets que s’envien entre els nodes perquè el funcionament de la xarxa sigui òptim i tots els clients puguin tenir-hi accés i estiguin connectats entre ells. Al finalitzar l’estudi teòric d’aquest tipus de xarxa i veure les seves avantatges i desavantatges respecte altres tipus de xarxes sense fils, es muntaran dos petites xarxa. Per a muntar-les utilitzarem de Punts d’Accés els nodes Ubuquiti Nanoestation LocoM2. Una de les xarxes serà al poble Bellcaire d’Urgell, on és connectaran tres cases, on només una te accés a Internet i els nodes estaran connectats en línia, es a dir, del Node1 – Node2 – Node3. La segona serà a una casa de Barcelona on mitjançant els tres nodes obtindrem una connexió d’Internet a tota la casa, en aquest cas els tres nodes estaran connectats els tres formant un cercle, es a dir, Node1-Node2-Node3-Node1. Finalment, és mirarà una proposta de futur, on es parlaria amb l’Ajuntament del poble on s’ha fet la primera proba per realitzar una Xarxa mallada sense fils a tots els llocs públics del poble.

O modelamento estatístico de misturas: experimento tutorial usando voltametria de redissolução anódica

This work illustrates the modeling procedure for a solvent mixture using the simplex- centroid approach. The selected experiment was the optimization of the peak current observed in the direct determination of nickel by anodic stripping voltammetry (ASV) in a solvent mixture composed of N,N-dimethylformamide, ethanol and water. The text is presented in a tutorial way, showing in detail the several steps which must be followed in such a process. Since not all possible mixtures lead to a measurable instrumental response, pseudocomponents had to be used to rescale the experimental design. This also allows to show how to apply this tool, usually troublesome for non-specialists in mixture modeling procedures.

Quimiometria II: planilhas eletrônicas para cálculos de planejamentos experimentais, um tutorial

This work describes, through examples, a simple way to carry out experimental design calculations applying an spreadsheets. The aim of this tutorial is to introduce an alternative to sophisticated commercial programs that normally are too complex in data input and output. An overview of the principal methods is also briefly presented. The spreadsheets are suitable to handle different types of computations such as screening procedures applying factorial design and the optimization procedure based on response surface methodology. Furthermore, the spreadsheets are sufficiently versatile to be adapted to specific experimental designs.

Experimento didático de quimiometria para análise exploratória de óleos vegetais comestíveis por espectroscopia no infravermelho médio e análise de componentes principais: um tutorial, parte I

This manuscript aims to show the basic concepts and practical application of Principal Component Analysis (PCA) as a tutorial, using Matlab or Octave computing environment for beginners, undergraduate and graduate students. As a practical example it is shown the exploratory analysis of edible vegetable oils by mid infrared spectroscopy.

Experimento didático de quimiometria para calibração multivariada na determinação de paracetamol em comprimidos comerciais utilizando espectroscopia no infravermelho próximo: um tutorial, parte II

The aim of this manuscript was to show the basic concepts and practical application of Partial Least Squares (PLS) as a tutorial, using the Matlab computing environment for beginners, undergraduate and graduate students. As a practical example, the determination of the drug paracetamol in commercial tablets using Near-Infrared (NIR) spectroscopy and Partial Least Squares (PLS) regression was shown, an experiment that has been successfully carried out at the Chemical Institute of Campinas State University for chemistry undergraduate course students to introduce the basic concepts of multivariate calibration in a practical way.

Experimento didático de quimiometria para planejamento de experimentos: avaliação das condições experimentais na determinação espectrofotométrica de ferro II com o-fenantrolina. Um tutorial, parte III

The objective of this manuscript is to describe a practical experiment that can be employed for teaching concepts related to design of experiments using Matlab or Octave computing environment to beginners, undergraduate and graduate students. The classical experiment for determination of Fe (II) using o-phenanthroline was selected because it is easy to understand, and all the required materials are readily available in most analytical laboratories. The approach used in this tutorial is divided in two steps: first, the students are introduced to the concept of multivariate effects, how to calculate and interpret them, and the construction and evaluation of a linear model to describe the experimental domain by using a 2³ factorial design. Second, an extension of the factorial design by adding axial points is described, thereby, providing a central composite design. The quadratic model is then introduced and used to build the response surface.

Avaliação formativa em sessão tutorial: concepções e dificuldades

A proposta deste trabalho é apreender concepções de estudantes e tutores sobre a avaliação formativa nas sessões tutoriais de um currículo PBL, identificando as dificuldades enfrentadas no desenvolvimento dessa prática. Um questionário Likert foi aplicado a 11 tutores e 45 discentes do sétimo período do curso de Medicina da Universidade Estadual de Montes Claros e uma entrevista de aprofundamento foi realizada com a totalidade dos tutores e 20 estudantes. Os entrevistados percebem a proposta formativa da avaliação na sessão tutorial, definindo-a como processual, reflexiva, dialógica, diagnóstica, e enfatizam a possibilidade de feedback como fator motivador e determinante para solucionar as deficiências detectadas e reforçar as potencialidades percebidas. São identificadas dificuldades relacionadas ao desempenho dos docentes, como falta de preparo, ao desempenho dos estudantes (falta de sinceridade, maturidade) e outras decorrentes da inadequação dos critérios utilizados nos instrumentos avaliativos. Os resultados apontam a necessidade de programas de desenvolvimento docente e discente em avaliação, assim como maior compromisso das instituições que utilizam a metodologia Aprendizagem Baseada em Problemas na busca contínua e reflexiva da coerência com os pressupostos pedagógicos estabelecidos pelo currículo.

Surgical treatment of subcostal incisional hernia with polypropylene mesh - analysis of late results

OBJECTIVE: To evaluate the results of subcostal incisional hernia repair using polypropylene mesh, the technical aspects of musculo-aponeurotic reconstruction, routine fixation of supra-aponeurotic mesh and follow-up for five years.METHODS: We conducted a retrospective study that assessed 24 patients undergoing subcostal incisional hernia repair with use of polypropylene mesh; 15 patients (62.5%) were female; ages ranged from 33 to 82, and 79.1% had comorbidities.RESULTS: Early complications: three cases (12.5%) of wound infection, three cases (12.5%) of seroma, one case (4.1%) of hematoma; and one case (4.1%) of wound dehiscence. Late complications occurred in one case (4.1%) of hernia recurrence attributed to technical failure in the fixation of the mesh and in one case (4.1%) of chronic pain. There were no cases of exposure or rejection of the mesh.CONCLUSION: The subcostal incisional hernia, though not very relevant, requires adequate surgical treatment. Its surgical correction involves rebuilding the muscle-aponeurotic defect, supra-aponeurotic fixation of polypropylene mesh, with less complexity and lower rates of complications and recurrences.