Eletroresistividade aplicada à caracterização hidrogeológica para o abastecimento da cidade de São Domingos do Araguaia-Pará

O uso de métodos geofísicos (elétricos, eletromagnéticos e perfilagem de poço) na prospecção de água subterrânea em muitas localidades no Estado do Pará, tornou-se possível graças a um convênio firmado em 1988, entre a Fundação Nacional de Saúde e a Universidade Federal do Pará, através do Departamento de Geofísica e do Curso de Pós-Graduação em Geofísica, sendo estes responsáveis pelo estudo técnico das áreas prospectadas. Nosso objetivo nesta tese é contribuir com critérios geoelétricos, com base na utilização de dados de resistividade aparente (p_a), medidos em superfície, visando melhorar a caracterização do quadro geológico de subsuperfície e por conseguinte prover informações mais confiáveis quanto aos recursos dos mananciais subterrâneos. Inicialmente, analisamos a influência que algumas estruturas 2D, em subsuperfície, tem sobre os dados de eletroresistividade, medidos em Sondagens Elétricas Verticais (SEVs), com o arranjo Schlumberger. Este estudo foi realizado através de simulações numéricas utilizando o programa computacional SEV2D desenvolvido no Departamento de Geofísica, baseado na técnica dos elementos finitos. Resultados mostram ambiguidades geradas pelo uso de métodos de interpretação 1D de SEVs, executados em ambientes geológicos de características bidimensionais. A parte prática da tese se constituiu no tratamento interpretativo de dados de eletroresistividade coletados na sede do município de São Domingos do Araguaia, cidade localizada na região sudeste do Estado do Pará. A aquisição deste dados se deu através de SEVs, utilizando o arranjo Schlumberger. Correlacionando os resultados das interpretações geofísicas com informações geológicas foi possível definir um quadro geológico para a área que serve como referência para a prospecção de água subterrânea na referida cidade.

Estimativa dos perfis de permeabilidade e de porosidade utilizando rede neural artificial

A permeabilidade e a porosidade são duas das mais importantes propriedades petrofísicas para a qualificação dos reservatórios de óleo e gás. A porosidade está relacionada à capacidade de armazenamento de fluidos e a permeabilidade, com a capacidade de produção destes fluidos. Suas medidas são, normalmente, realizadas em laboratório, através de testemunhos da rocha. Esses processos têm custos elevados e nem todos os poços são testemunhados. As estimativas da permeabilidade e da porosidade são de fundamental importância para os engenheiros de reservatório e geofísicos, uma vez que seus valores podem definir a completação ou não de um poço petrolífero. O perfil de porosidade e sua relação com o perfil de densidade, é bem conhecida na geofísica de poço. No entanto, existem poucas relações quantitativas e/ou qualitativas entre a porosidade e a permeabilidade, como por exemplo as relações de Kozeny. Sendo assim, este trabalho busca o estabelecimento do perfil de permeabilidade e do perfil de porosidade, a partir de informações do perfil de densidade. Para tanto, buscamos a relação entre a propriedade física da rocha (densidade) e as propriedades petrofísicas: permeabilidade e porosidade, utilizando como metodologia à técnica de redes neurais artificiais, como a rede neural artificial com função de base radial. A obtenção da permeabilidade e da porosidade a partir da rede neural artificial, que possui como entrada a informação da densidade possibilita um menor custo para a aquisição dessas importantes informações petrofísicas, permite ao intérprete de perfis de poço optar ou não pela exploração de uma unidade estudada, além de uma visão mais completa do reservatório. Os procedimentos para a estimativa da permeabilidade e da porosidade estão direcionados para uma única formação, mas os intérpretes de perfis poderão aplicar a diretriz apresentada no programa de rede neural artificial com função de base radial, utilizando a estimativa dessas propriedades petrofísicas para outras formações, inclusive de outros campos petrolíferos. Portanto, recomenda-se a utilização de um conjunto de dados completo, com quantidade de dados suficientes de um mesmo poço, a fim de viabilizar corretamente a melhor interpretação.

Interfaces gráficas de entrada e saída da eGs (electrical GEOPHYSICS suite)

Apresentamos uma interface gráfica para o programa eGs (electrical GEOPHYSICS suíte) usado na modelagem e interpretação de dados elétricos e eletromagnéticos na exploração geofísica. Esta dissertação corresponde a parcela do programa que trata das interfaces de entrada de dados de modelos geoelétricos bi e tridimensionais e das interfaces de apresentação dos resultados da modelagem como também dos dados observados. O programa contém interfaces para criação, modificação e visualização de modelos geoelétricos bi e tridimensionais, e para apresentação da resposta do modelo através de gráficos e imagens. Este trabalho resultou num programa com diversas opções para alterar a geometria e as propriedades físicas do modelo geoelétricos e recursos de visualização para facilitar a interpretação de dados geofísicos. A interface gráfica pode ser usada para criar modelos geoelétricos dos métodos elétrico ou eletromagnético mais usados e analisar as respostas dos modelos e de dados observados em campanha de campo. O programa é suficientemente flexível de modo que novas interfaces gráficas de outros métodos elétricos e eletromagnéticos podem ser facilmente implementadas.

Caracterização do sistema petrolífero das águas rasas na Bacia do Espírito Santos com a aplicação de técnicas geofísicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Seasonal variation in the fate of seeds under contrasting logging regimes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tank experiments with borehole self-potential data

Despite their importance in the evaluation of petroleum and gas reservoirs, measurements of self-potential data under borehole conditions (well-logging) have found only minor applications in aquifer and waste-site characterization. This can be attributed to lower signals from the diffusion fronts in near-surface environments because measurements are made long after the drilling of the well, when concentration fronts are already disappearing. Proportionally higher signals arise from streaming potentials that prevent using simple interpretation models that assume signals from diffusion only. Our laboratory experiments found that dual-source self-potential signals can be described by a simple linear model, and that contributions (from diffusion and streaming potentials) can be isolated by slightly perturbing the borehole conditions. Perturbations are applied either by changing the concentration of the borehole-filling solution or its column height. Parameters useful for formation evaluation can be estimated from data measured during perturbations, namely, pore water resistivity, pressure drop across the borehole wall, and electrokinetic coupling parameter. These are important parameters to assess, respectively, water quality, aquifer lateral continuity, and interfacial properties of permeable formations.

Potential of a neutrino detector in the ANDES underground laboratory for geophysics and astrophysics of neutrinos

The construction of the Agua Negra tunnels that will link Argentina and Chile under the Andes, the world's longest mountain range, opens the possibility of building the first deep underground laboratory in the Southern Hemisphere. This laboratory has the acronym ANDES (Agua Negra Deep Experiment Site) and its overburden could be as large as similar to 1.7 km of rock, or 4500 mwe, providing an excellent low background environment to study physics of rare events like the ones induced by neutrinos and/or dark matter. In this paper we investigate the physics potential of a few kiloton size liquid scintillator detector, which could be constructed in the ANDES laboratory as one of its possible scientific programs. In particular, we evaluate the impact of such a detector for the studies of geoneutrinos and Galactic supernova neutrinos, assuming a fiducial volume of 3 kilotons as a reference size. We emphasize the complementary roles of such a detector to the ones of the Northern Hemisphere neutrino facilities, given the advantages of its geographical location.

Underground Stratigraphy of Montana

The purpose of this thesis is to study the subsurface stratigraphy of the state of Montana from information acquired from well logs, composite logs, and measured sections. Underground stratigraphy is important for the intelligent prospecting for oil, gas, or water. A knowledge of the strata beneath us can be gathered only by measurements of numerous outcrops or by deep drilling with careful sampling or logging of the formations passed through.

Investigating Peatland Stratigraphy and Hydrogeology Using Integrated Electrical Geophysics

Hydrology has been suggested as the mechanism controlling vegetation and related surficial pore-water chemistry in large peatlands. Peatland hydrology influences the carbon dynamics within these large carbon reservoirs and will influence their response to global warming. A geophysical survey was completed in Caribou Bog, a large peatland in Maine, to evaluate peatland stratigraphy and hydrology. Geophysical measurements were integrated with direct measurements of peat stratigraphy from probing, fluid chemistry, and vegetation patterns in the peatland. Consistent with previous field studies, ground-penetrating radar (GPR) was an excellent method for delineating peatland stratigraphy. Prominent reflectors from the peat-lake sediment and lake sediment-mineral soil contacts were precisely recorded up to 8 m deep. Two-dimensional resistivity and induced polarization imaging were used to investigate stratigraphy beneath the mineral soil, beyond the range of GPR. We observe that the peat is chargeable, and that IP imaging is an alternative method for defining peat thickness. The chargeability of peat is attributed to the high surface-charge density on partially decomposed organic matter. The electrical conductivity imaging resolved glaciomarine sediment thickness (a confining layer) and its variability across the basin. Comparison of the bulk conductivity images with peatland vegetation revealed a correlation between confining layer thickness and dominant vegetation type, suggesting that stratigraphy exerts a control on hydrogeology and vegetation distribution within this peatland. Terrain conductivity measured with a Geonics EM31 meter correlated with confining glaciomarine sediment thickness and was an effective method for estimating variability in glaciomarine sediment thickness over approximately 18 km(2). Our understanding of the hydrogeology, stratigraphy, and controls on vegetation growth in this peatland was much enhanced from the geophysical study.

Secondary succession and dipterocarp recruitment in Bornean rain forest after logging

To understand succession in dipterocarp rain forest after logging, the structure, species composition and dynamics of primary (PF) and secondary (SF) forest at Danum were compared. In 10 replicate 0.16-ha plots per forest type trees >= 10 cm gbh (3.2 cm dbh) were measured in 1995 and 2001. The SF had been logged in 1988, which allowed successional change to be recorded at 8 and 13 years. In 2001, saplings (1.0-3.1 cm dbh) were measured in nested quadrats. The forest types were similar in mean radiation at 2 m height, and in density, basal area and species number of all trees. Among small (10 <= 31.4) and large ( >= 31.4 cm gbh) trees, in both 1995 and 2001, there were 10- and 3-fold more dipterocarps in SF than PF respectively; and averaging over the two dates, there were correspondingly ca. 10- and 18-fold more pioneers. Mortality was ca. 60% higher in SF than PF, largely due to a seven-fold difference for pioneers: for dipterocarps there was little difference. Recruitment was similar in PF and SE Stem growth rates were 37% higher in SF than PF for all trees, although dipterocarps showed the opposite trend. Among saplings, dipterocarps dominated SF with a 10-fold higher density than in PF. For dipterocarps, the light (LH) and medium-heavy (MHH) canopy hardwoods, and the shade-tolerant, smaller-stature other (OTH) species (e.g. Hopea and Vatica) were in the ratios ca. 40:15:45 in SF and 85: < 1:15 in PF. LHs had higher mortality than OTHs in SE In PF ca. 80% of the saplings were LH: in SF ca. 70% were OTH. The predominance of OTHs in SF is explained by the logging of primary rain forest which was in a likely late stage of recovery from natural disturbance, plus the continuing shaded conditions in the understorey promoted by dense pioneer vegetation. At 13 years after logging succession appeared to be inhibited: LHs were being suppressed but MHHs and OTHs persisted. Succession in lowland dipterocarp, rain forests may therefore depend on the successional state of the primary forest when it is logged. A review of logged versus unlogged studies in Borneo highlights the need for more detailed ecological comparisons.

Geophysical logging on sediment core and hole CRP-3 from the Ross Sea, Antarctica

Cape Roberts drillhole CRP-3 in the northern part of McMurdo Sound (Ross Sea, Antarctica) targeted the western margin of the Victoria Land basin to investigate Neogene to Palaeogene climatic and tectonic history by obtaining continuous core and downhole logs (Cape Roberts Science Team, 2000). The CRP-3 drillhole extended to 939.42 mbsf (meters below seafloor) at a water depth of 297 m. The first downhole measurements after drilling were the temperature and salinity logs. Both were measured at the beginning and at the end of each of the three logging phases. Although an equilibrium temperature state may not have been fully reached after drilling, the temperature and salinity profiles seem to be scarcely disturbed. The average overall temperature gradient calculated from all temperature measurements is 28.5 K/km; remarkably lower than the temperature gradients found in other boreholes in the western Ross See and the Transantarctic Mountains. Anomalies in the salinity profiles at the beginning of each logging phase were no longer present at the end of the corresponding logging phase. This pattern indicates that drilling mud invaded the formation during drilling operations and flowed back into the borehole after drilling ceased. Thus, zones of temperature and salinity anomalies identify permeable zones in the formation and may be pathways for fluid flow. Radiogenic heat production, calculated from the radionuclide contents, is relatively low, with average values between 0.5 and 1.0 pW/m3. The highest values (up to 2 µW/m3) were obtained for the lower part of the Beacon Sandstone below 855 mbsf. The heat flow component due to radiogenic heat production integrated over the entire borehole is 0.7 mW/m2. Thermal conductivities range from 1.3 to 3 W/mK with an average value of 2.1 W/mK over the Tertiary section. Together with the average temperature gradient of 28.5 K/km this yields an average heat flow value of 60 mW/m2.

Stable isotopes, core logging data, relative paleointensity, dry bulk density, biogenic opal, CN-data (TC, TOC, CaCO3, TN), element concentrations, and coarse fraction of three sediment cores from the western Bering Sea

We used piston cores recovered in the western Bering Sea to reconstruct millennial-scale changes in marine productivity and terrigenous matter supply over the past ~180 kyr. Based on a geochemical multi-proxy approach, our results indicate closely interacting processes controlling marine productivity and terrigenous matter supply comparable to the situation in the Okhotsk Sea. Overall, terrigenous inputs were high, whereas export production was low. Minor increases in marine productivity occurred during intervals of Marine Isotope Stage 5 and interstadials, but pronounced maxima were recorded during interglacials and Termination I. The terrigenous material is suggested to be derived from continental sources on the eastern Bering Sea shelf and to be subsequently transported via sea ice, which is likely to drive changes in surface productivity, terrigenous inputs, and upper-ocean stratification. From our results we propose glacial, deglacial, and interglacial scenarios for environmental change in the Bering Sea. These changes seem to be primarily controlled by insolation and sea-level forcing which affect the strength of atmospheric pressure systems and sea-ice growth. The opening history of the Bering Strait is considered to have had an additional impact. High-resolution core logging data (color b*, XRF scans) strongly correspond to the Dansgaard-Oeschger climate variability registered in the NGRIP ice core and support an atmospheric coupling mechanism of Northern Hemisphere climates.