Analysis of the Hydrogeological Conditions and the Effects of Development on the Hydraulic Head at Redmond Ridge East

Redmond Ridge East (RRE) is a large-scale master plan community in East King County, WA. In this report, I evaluate the spatial variability of the Quaternary Advance Outwash (Qva) at RRE and the time-series data for 16 water wells with the intent to better understand groundwater below the RRE area. I investigate changes between pre- and post-development conditions through the determination of temporal changes in annual water level, annual water level fluctuations, hydraulic head response to precipitation, and ambient drainage of the aquifer. I also perform a basic analysis of the annual aquifer recharge and a determination for the storage through the implementation of the water table fluctuation (WTF) method. Associated Earth Sciences (AESI) was tasked with monitoring the geological and environmental impacts during the development of RRE and collected the data I use in this report. AESI involvement in monitoring began in 1998 and extends to the present. Sixteen wells were identified in the RRE area with adequate temporal data to conduct the analysis. A comparison of the well logs and aquifer testing data allowed local variations in the Qva to be mapped. The WTF was used to determine a range of reasonable specific yield values for locations where the Qva was unconfined. Yearly average of the seasonal water level high and lows, and the fluctuations were quantified. Temporal relationships were established through linear regression. The average water level was found to be increasing in some locations, and the corresponding fluctuations were found to decrease. However, no clear change between pre- and post-development was observed. The response of hydraulic head to precipitation was investigated through an analysis of hydrographs for ten wells. Periods of consistent response and the corresponding precipitation during each period were delineated. A linear relationship between precipitation and water level change was determined. The threshold precipitation under which there is a positive response in the hydraulic head was established. No observable changes were apparent between pre- and post-development conditions. The ambient drainage for the Qva was calculated using recessional periods on the hydrograph. The transmissivity of Qva varies with thickness of the overlying lodgment till and thickness of the Qva, itself. Water level fluctuations observed in the Qva are consistent with regional observations. Localized areas in the Qva display the large 10 foot fluctuations and these anomalies are likely due to a combination of the local variability in the storativity as well as the concentration and channeling of water due to geographical variations in the Qva and the overlying topography. All trends seen in the RRE area remained relatively constant through time. There was no evidence showing an effect of development on the hydraulic head at RRE. This implies that the style and distribution of infiltration has not changed as a result of development, and that any measures in place are properly mitigating the effects of development on the RRE region.

Undergraduate Students’ Perceptions of Study Abroad and Their Level of Achievement of Global Learning Outcomes

This study expanded on current research on study abroad and global learning, using the Global Perspective Inventory (GPI), and conducted at Florida International University (FIU) in Miami, FL. The GPI assesses the holistic development of a global perspective in higher education within three domains and their respective FIU-determined equivalents: cognitive (global awareness), intrapersonal (global perspective), and interpersonal (global engagement). The main purpose of this study was to assess FIU’s undergraduate students’ perceptions of study abroad on their level of achievement of global awareness, global perspective, and global engagement. The secondary purpose was to determine how the students described their study abroad experience and achievement of global learning. The research design for this study consisted of parallel mixed methods. The quantitative component was an ex post facto with hypothesis design, using a pretest/posttest nonequivalent group methodology. FIU undergraduates (N=147) who studied abroad for one semester or more completed the GPI pre- and post-tests. Descriptive statistics and paired t-tests were conducted to compare the means. The interviews included 10 students, and were analyzed through Structural coding, Saldaña’s In Vivo coding, and Value coding. Quantitative analyses indicated positive changes in the students’ global awareness and global perspective. These analyses also showed that the FIU students achieved higher post-test means on all the domains of the GPI compared to other studies. Qualitative analyses showed that the students’ experiences incorporated all three global learning outcomes, most notably global awareness and perspective.

Satisfaction level of adults with University Programmes

This research analyses the degree of satisfaction of a sample of 874 students from University Programmes for adults and elderly, from Spain. The investigation is framed along the lines of positive psychology, specifically in Martin Seligman’s proposal, founder of this movement, who advocates that the main objective of this branch of psychological science is to investigate the healthy aspects of human life. The methodology applied is mixed. The level of satisfaction, collected through the survey technique was analysed by the SPSS 20.0 (using method CHAID) statistical program for the quantitative data; and by the Programme Atlas.Ti 6.0 (textual and conceptual analyses) for the qualitative data. The analysed data reveal that students are highly satisfied with the programme, the teachers and their peers. The discussion confirms these results, since it has also stood out in others studies

ASSESSING THE LEVEL OF TECHNOLOGY INTEGRATION OF TITLE I TEACHERS IN A LARGE URBAN SCHOOL DISTRICT

By law, Title I schools employ teachers who are both competent in their subject knowledge and State certified. In addition, Title I teachers receive ongoing professional development in technology integration and are equipped with the latest innovative resources to integrate technology in the classroom. The aim is higher academic achievement and the effective use of technology in the classroom. The investment to implement technology in this large urban school district to improve student achievement has continued to increase. In order to infuse current and emerging technology throughout the curriculum, this school district needs to know where teachers have, and have not, integrated technology. Yet the level of how technology is integrated in Title I schools is unknown. This study used the Digital-Age Survey Levels of Teaching Innovation (LoTi) to assess 508 Title I teachers’ technology integration levels using three major initiatives purchased by Title I— the iPads program, the Chromebook initiative, and the interactive whiteboards program. The study used a quantitative approach. Descriptive statistics, regression analysis, and statistical correlations were used to examine the relationship between the level of technology integration and the following dependent variables: personal computer use (PCU), current instructional practices (CIP), and levels of teaching innovation (LoTi). With this information, budgetary decisions and professional development can be tailored to the meet the technology implementation needs of this district. The result of this study determined a significant relationship between the level of teaching innovation, personal computer use, and current instructional practices with teachers who teach with iPad, Chromebook, and/or interactive whiteboard. There was an increase in LoTi, PCU, and CIP scores with increasing years of experience of Title I teachers. There was also a significant relationship between teachers with 20 years or more teaching experience and their LoTi score.

Investigation into the meteorological aspects of the variations in the level of Lake Victoria

The level of Lake Victoria has, since 1961, reached a height which caused serious flood damage. Already the financial implications are considerable for Kenya, Tanzania and Uganda. If further rises can be anticipated, expenditure on flood control measures to the tune of several million pounds sterling must be envisaged. If such rises should lead to uncontrolled discharge at the Owen Falls Dam site because of overshooting, downstream districts of Uganda and the Sudan may be seriously flooded. All this merits a thorough study, and any indication of the future behaviour of lake levels, even when associated with a low probability, must be taken into account. In these circumstances the Water Development Department of Kenya approached the East African Meteorological Department in November, 1964, on behalf of all parties concerned with the request to study the meteorological background of the Iake level variation, with a view to forecasting future behaviour.

Challenges of development in difficult sociopolitical contexts

In the middle of writing this chapter, I visited a friend who has beenin the development industry for a couple of decades. I had not seenhim for a while as he had been in Afghanistan and, for a considerableperiod after that, in hospital. Afghanistan has arguably been the mostdangerous place in the world to do development work, perhaps since the1960s, and, of course, undertaking development while a war is ongoingis almost a contradiction in terms. Especially in Afghanistan, butperhaps in many other ‘difficult sociopolitical contexts’, developmentgains have been few, extraordinarily expensive for their outcomes, andprobably not sustainable.Not all development workers end up in my friend’s situation; a suicidebomber left him substantially and permanently damaged. But, juston this personal level, I have had colleagues and friends arrested, shotat, jailed and kidnapped, as well as being exposed to dangerous illnessesand, too often unstated, often long-term psychological trauma. Localswhom colleagues have worked with have experienced all this, as well asbeing beaten, tortured and, too often, killed. My own first rule in ‘difficultsociopolitical contexts’ is never to expose another person to danger,either at the time or, potentially, later. Yet it happens, to foreigners, tolocals working with foreigners and to state employees. Developmentworkers easily fall foul of the extremes of competing perspectives andgoals, where there is no such thing as neutrality and everyone who isnot a clear friend is a clear enemy.

Resilience in chronic disease : the relationships among risk factors, protective factors, adaptive outcomes, and the level of resilience in adults with diabetes

Background: There are innumerable diabetes studies that have investigated associations between risk factors, protective factors, and health outcomes; however, these individual predictors are part of a complex network of interacting forces. Moreover, there is little awareness about resilience or its importance in chronic disease in adulthood, especially diabetes. Thus, this is the first study to: (1) extensively investigate the relationships among a host of predictors and multiple adaptive outcomes; and (2) conceptualise a resilience model among people with diabetes. Methods: This cross-sectional study was divided into two research studies. Study One was to translate two diabetes-specific instruments (Problem Areas In Diabetes, PAID; Diabetes Coping Measure, DCM) into a Chinese version and to examine their psychometric properties for use in Study Two in a convenience sample of 205 outpatients with type 2 diabetes. In Study Two, an integrated theoretical model is developed and evaluated using the structural equation modelling (SEM) technique. A self-administered questionnaire was completed by 345 people with type 2 diabetes from the endocrine outpatient departments of three hospitals in Taiwan. Results: Confirmatory factor analyses confirmed a one-factor structure of the PAID-C which was similar to the original version of the PAID. Strong content validity of the PAID-C was demonstrated. The PAID-C was associated with HbA1c and diabetes self-care behaviours, confirming satisfactory criterion validity. There was a moderate relationship between the PAID-C and the Perceived Stress Scale, supporting satisfactory convergent validity. The PAID-C also demonstrated satisfactory stability and high internal consistency. A four-factor structure and strong content validity of the DCM-C was confirmed. Criterion validity demonstrated that the DCM-C was significantly associated with HbA1c and diabetes self-care behaviours. There was a statistical correlation between the DCM-C and the Revised Ways of Coping Checklist, suggesting satisfactory convergent validity. Test-retest reliability demonstrated satisfactory stability of the DCM-C. The total scale of the DCM-C showed adequate internal consistency. Age, duration of diabetes, diabetes symptoms, diabetes distress, physical activity, coping strategies, and social support were the most consistent factors associated with adaptive outcomes in adults with diabetes. Resilience was positively associated with coping strategies, social support, health-related quality of life, and diabetes self-care behaviours. Results of the structural equation modelling revealed protective factors had a significant direct effect on adaptive outcomes; however, the construct of risk factors was not significantly related to adaptive outcomes. Moreover, resilience can moderate the relationships among protective factors and adaptive outcomes, but there were no interaction effects of risk factors and resilience on adaptive outcomes. Conclusion: This study contributes to an understanding of how risk factors and protective factors work together to influence adaptive outcomes in blood sugar control, health-related quality of life, and diabetes self-care behaviours. Additionally, resilience is a positive personality characteristic and may be importantly involved in the adjustment process among people living with type 2 diabetes.

What are students' understandings of how digital tools contribute to learning in design disciplines?

Building Information Modelling (BIM) is evolving in the Construction Industry as a successor to CAD. CAD is mostly a technical tool that conforms to existing industry practices, however BIM has the capacity to revolutionise industry practice. Rather than producing representations of design intent, BIM produces an exact Virtual Prototype of any building that in an ideal situation is centrally stored and freely exchanged between the project team, facilitating collaboration and allowing experimentation in design. Exposing design students to this technology through their formal studies allows them to engage with cutting edge industry practices and to help shape the industry upon their graduation. Since this technology is relatively new to the construction industry, there are no accepted models for how to “teach” BIM effectively at university level. Developing learning models to enable students to make the most out of their learning with BIM presents significant challenges to those teaching in the field of design. To date there are also no studies of students experiences of using this technology. This research reports on the introduction of Building Information Modeling (BIM) software into a second year Bachelor of Design course. This software has the potential to change industry standards through its ability to revolutionise the work practices of those involved in large scale design projects. Students’ understandings and experiences of using the software in order to complete design projects as part of their assessment are reported here. In depth semi-structured interviews with 6 students revealed that students had views that ranged from novice to sophisticate about the software. They had variations in understanding of how the software could be used to complete course requirements, to assist with the design process and in the workplace. They had engaged in limited exploration of the collaborative potential of the software as a design tool. Their understanding of the significance of BIM for the workplace was also variable. The results indicate that students are beginning to develop an appreciation for how BIM could aid or constrain the work of designers, but that this appreciation is highly varied and likely to be dependent on the students’ previous experiences of working in a design studio environment. Their range of understandings of the significance of the technology is a reflection of their level of development as designers (they are “novice” designers). The results also indicate that there is a need for subjects in later years of the course that allow students to specialise in the area of digital design and to develop more sophisticated views of the role of technology in the design process. There is also a need to capitalise on the collaborative potential inherent in the software in order to realise its capability to streamline some aspects of the design process. As students become more sophisticated designers we should explore their understanding of the role of technology as a design tool in more depth in order to make recommendations for improvements to teaching and learning practice related to BIM and other digital design tools.

Housing supply in Australia : the impact of the availability of development finance

Before the Global Financial Crisis many providers of finance had growth mandates and actively pursued development finance deals as a way of gaining higher returns on funds with regular capital turnover and re-investment possible. This was able to be achieved through high gearing and low presales in a strong market. As asset prices fell, loan covenants breached and memories of the 1990’s returned, banks rapidly adjusted their risk appetite via retraction of gearing and expansion of presale requirements. Early signs of loosening in bank credit policy are emerging, however parties seeking development finance are faced with a severely reduced number of institutions from which to source funding. The few institutions that are lending are filtering out only the best credit risks by way of constrictive credit conditions including: low loan to value ratios, the corresponding requirement to contribute high levels of equity, lack of support in non-prime locations and the requirement for only borrowers with well established track records. In this risk averse and capital constrained environment, the ability of developers to proceed with real estate developments is still being constrained by their inability to obtain project finance. This paper will examine the pre and post GFC development finance environment. It will identify the key lending criteria relevant to real estate development finance and will detail the related changes to credit policies over this period. The associated impact to real estate development projects will be presented, highlighting the significant constraint to supply that the inability to obtain finance poses.

Dragline automation - a decade of development : shared autonomy for improving mining equipment productivity

Draglines are massive machines commonly used in surface mining to strip overburden, revealing the targeted minerals for extraction. Automating some or all of the phases of operation of these machines offers the potential for significant productivity and maintenance benefits. The mining industry has a history of slow uptake of automation systems due to the challenges contained in the harsh, complex, three-dimensional (3D), dynamically changing mine operating environment. Robotics as a discipline is finally starting to gain acceptance as a technology with the potential to assist mining operations. This article examines the evolution of robotic technologies applied to draglines in the form of machine embedded intelligent systems. Results from this work include a production trial in which 250,000 tons of material was moved autonomously, experiments demonstrating steps towards full autonomy, and teleexcavation experiments in which a dragline in Australia was tasked by an operator in the United States.

Changes in Level of Virus Accumulation and Incidence of Infection are Critical in the Characterization of Rice Tungro Bacilliform Virus (RTBV) Resistance in Rice

Analysis by enzyme-linked immunosorbent assay showed that Rice tungro bacilliform virus (RTBV) accumulated in a cyclic pattern from early to late stages of infection in tungro-susceptible variety, Taichung Native 1 (TN1), and resistant variety, Balimau Putih, singly infected with RTBV or co-infected with RTBV+Rice tungro spherical virus (RTSV). These changes in virus accumulation resulted in differences in RTBV levels and incidence of infection. The virus levels were expressed relative to those of the susceptible variety and the incidence of infection was assessed at different weeks after inoculation. At a particular time point, RTBV levels in TN1 or Balimau Putih singly infected with RTBV were not significantly different from the virus level in plants co-infected with RTBV+RTSV. The relative RTBV levels in Balimau Putih either singly infected with RTBV or co-infected with RTBV+RTSV were significantly lower than those in TN1. The incidence of RTBV infection varied at different times in Balimau Putih but not in TN1, and to determine the actual infection, the number of plants that became infected at least once anytime during the 4wk observation period was considered. Considering the changes in RTBV accumulation, new parameters for analyzing RTBV resistance were established. Based on these parameters, Balimau Putih was characterized having resistance to virus accumulation although the actual incidence of infection was >75%.

Ramifications of development projects deemed “state significant”

Purpose, Design/methodology / approach The acknowledgement of state significance in relation to development projects can result in special treatment by regulatory authorities, particularly in terms of environmental compliance and certain economic and other government support measures. However, defining just what constitutes a “significant project”, or a project of “state significance”, varies considerably between Australian states. In terms of establishing threshold levels, in Queensland there is even less clarity. Despite this lack of definition, the implications of “state significance” can nevertheless be considerable. For example, in Queensland if the Coordinator-General declares a project to be a “significant project” under the State Development and Public Works Organisation Act 1971, the environmental impact assessment process may become more streamlined – potentially circumventing certain provisions under The Integrated Planning Act 1997. If the project is not large enough to be so deemed, an extractive resource under the State Planning Policy 2/07 - Protection of Extractive Resources 2007 may be considered to be of State or regional significance and subsequently designated as a “Key Resource Area”. As a consequence, such a project is afforded some measure of resource protection but remains subject to the normal assessment process under the Integrated Development Assessment System, as well as the usual requirements of the vegetation management codes, and other regulations. Findings (Originality/value) & Research limitations / implications This paper explores the various meanings of “state significance” in Queensland and the ramifications for development projects in that state. It argues for a streamlining of the assessment process in order to avoid or minimise constraints acting on the state’s development. In so doing, it questions the existence of a strategic threat to the delivery of an already over-stretched infrastructure program.