Climate changes, lead pollution and soil erosion in south Greenland over the past 700 years

Date of Acceptance: 05/06/2015 This research was made possible through funding provided by the Leverhulme Trust, the Spanish Ministry of Science and Innovation (Project CGL2010–20672) and Xunta de Galicia (grants R2014/001 and GPC2014/009). N Silva-Sánchez is currently supported by a FPU pre-doctoral grant (AP2010–3264) funded by the Spanish Government. Kirsty Golding, Andy McMullen, and Ian Simpson are thanked for their assistance with fieldwork. Alison Sandison produced the maps. Pete Langdon and two anonymous referees are thanked for comments that helped to improve the paper.

Climate changes, lead pollution and soil erosion in south Greenland over the past 700 years

Date of Acceptance: 05/06/2015 This research was made possible through funding provided by the Leverhulme Trust, the Spanish Ministry of Science and Innovation (Project CGL2010–20672) and Xunta de Galicia (grants R2014/001 and GPC2014/009). N Silva-Sánchez is currently supported by a FPU pre-doctoral grant (AP2010–3264) funded by the Spanish Government. Kirsty Golding, Andy McMullen, and Ian Simpson are thanked for their assistance with fieldwork. Alison Sandison produced the maps. Pete Langdon and two anonymous referees are thanked for comments that helped to improve the paper.

Evaluation of blood zinc, calcium and blood lead levels among children aged 1-36 months

Background: Early childhood lead exposure is associated with numerous adverse health effects. Biomonitoring among susceptible populations, such as children, has not been previously conducted. The aim of the study is to evaluate the blood lead (Pb) and total blood calcium (Ca) levels; blood zinc (Zn) levels. Methods: A cross-sectional study was designed to collect healthy children age 1-36 months (Mean ± SD: 1.5 ± 0.6 age, 60% boys) in the study from January 2010 to September 2011. Results: The overall mean blood Pb levels were 42.18 ± 12.13 μg/L, the overall mean blood Zn and total blood Ca concentrations were 62.18 ± 12.33 μmol/L and 1.78 ± 0.13 mmol/L, respectively. The prevalence of elevated blood Pb levels in all children was 1.3%. A significant difference was found between female and male subjects for the blood Pb and Zn. After controlling for gender and age, there was a weak positive correlation between total blood Ca and Zn level. Conclusions: The blood Pb levels had a significant negative correlation with total blood Ca level after adjusting for age and gender, and these findings suggest that Pb had effect on positive blood Zn and total blood Ca levels; parents should pay more attention to the nutrition of girls.

Role of solids in heavy metals build-up on urban road surfaces

Solids are widely identified as a carrier of harmful pollutants in stormwater runoff exerting a significant risk to receiving waters. This paper outlines the findings of an in-depth investigation on heavy metal adsorption to solids surfaces. Pollutant build-up samples collected from sixteen road sites in residential, industrial and commercial land uses were separated into four particle size ranges and analysed for a range of physico-chemical parameters and nine heavy metals including Iron (Fe), Aluminum (Al), Lead (Pb), Zinc (Zn), Cadmium (Cd), Chromium (Cr), Manganese (Mn), Nickel (Ni) and Copper (Cu). High specific surface area (SSA) and total organic carbon (TOC) content in finer particle size ranges was noted, thus confirming strong correlations with heavy metals. Based on their physico-chemical characteristics, two different types of solids originating from traffic and soil sources were identified. Solids generated by traffic were associated with high loads of heavy metals such as Cd and Cr with strong correlation with SSA. This suggested the existence of surface dependent bonds such as cation exchange between heavy metals and solids. In contrast, Fe, Al and Mn which can be attributed to soil inputs showed strong correlation with TOC suggesting strong bonds such as chemsorption. Zn was found to be primarily attached to solids by bonding with the oxides of Fe, Al and Mn. The data analysis also confirmed the predominance of the finer fraction, with 70% of the solids being finer than 150 µm and containing 60% of the heavy metal pollutant load.

Atmospheric deposition as a source of heavy metals in urban stormwater

Atmospheric deposition is one of the most important pathways of urban stormwater pollution. Atmospheric deposition which can be in the form of either wet or dry deposition have distinct characteristics in terms of associated particulate sizes, pollutant types and influential parameters. This paper discusses the outcomes of a comprehensive research study undertaken to identify important traffic characteristics and climate factors such as antecedent dry period and rainfall characteristics which influences the characteristics of wet and dry deposition of solids and heavy metals. The outcomes confirmed that Zinc (Zn) is correlated with traffic volume whereas Lead (Pb), Cadmium (Cd), Nickel (Ni), and Copper (Cu) are correlated with traffic congestion. Consequently, reducing traffic congestion will be more effective than reducing traffic volume for improving air quality particularly in relation to Pb, Cd, Ni, and Cu. Zn was found to have the highest atmospheric deposition rate compared to other heavy metals. Zn in dry deposition is associated with relatively larger particle size fractions (>10 µm), whereas Pb, Cd, Ni and Cu are associated with relatively smaller particle size fractions (<10 µm). The analysis further revealed that bulk (wet plus dry) deposition which is correlated with rainfall depth and contains a relatively higher percentage of smaller particles compared to dry deposition which is correlated with the antecedent dry period. As particles subjected to wet deposition are smaller, they disperse over a larger area from the source of origin compared to particles subjected to dry deposition as buoyancy forces become dominant for smaller particles compared to the influence of gravity. Furthermore, exhaust emission particles were found to be primarily associated with bulk deposition compared to dry deposition particles which mainly originate from vehicle component wear.

Toxic effects of Pb2+ on growth of cowpea (Vigna unguiculata)

A concentration as low as 1 μM lead (Pb) is highly toxic to plants, but previous studies have typically related plant growth to the total amount of Pb added to a solution. In the present experiment, the relative fresh mass of cowpea (Vigna unguiculata) was reduced by 10% at a Pb2+ activity of 0.2 μM for the shoots and at a Pb2+ activity of 0.06 μM for the roots. The primary site of Pb2+ toxicity was the root, causing severe reductions in root growth, loss of apical dominance (shown by an increase in branching per unit root length), the formation of localized swellings behind the root tips (due to the initiation of lateral roots), and the bending of some root tips. In the root, Pb was found to accumulate primarily within the cell walls and intercellular spaces.

Environmentally benign Fe chelates in plant nutrition

The low solubility of iron (Fe) depresses plant growth in calcareous soils. In order to improve Fe availability, calcareous soils are treated with synthetic ligands, such as ethylenediaminetetraacetic acid (EDTA) and ethylenediimi-nobis(2-hydroxyphenyl)acetic acid (EDDHA). However, high expenses may hinder their use (EDDHA), and the recalcitrance of EDTA against biodegra-dation may increase the potential of cadmium (Cd) and lead (Pb) leaching. This study evaluated the ability of biodegradable ligands, i.e. different stereo-isomers of ethylenediaminedisuccinic acid (EDDS), to provide Fe for lettuce (Lactuca sativa L.) and ryegrass (Lolium perenne cv. Prego), their effects on uptake of other elements and solubility in soils and their subsequent effects on the activity of oxygen-scavenging enzymes in lettuce. Both EDTA and EDDHA were used as reference ligands. In unlimed and limed quartz sand both FeEDDS(S,S) and a mixture of stereo-isomers of FeEDDS (25% [S,S]-EDDS, 25% [R,R]-EDDS and 50% [S,R]/[R,S]-EDDS), FeEDDS(mix), were as efficient as FeEDTA and FeEDDHA in providing lettuce with Fe. However, in calcareous soils only FeEDDS(mix) was comparable to FeEDDHA when Fe was applied twice a week to mimic drip irrigation. The Fe deficiency increased the manganese (Mn) concentration in lettuce in both acidic and alkaline growth media, whereas Fe chelates depressed it. The same was observed with zinc (Zn) and copper (Cu) in acidic growth media. EDDHA probably affected the hormonal status of lettuce as well and thus depressed the uptake of Zn and Mn even more. The nutrient concentrations of ryegrass were only slightly affected by the Fe availability. After Fe chelate splitting in calcareous soils, EDDS and EDTA increased the solubility of Zn and Cu most, but only the Zn concentration was increased in lettuce. The availability of Fe increased the activity of oxygen-scavenging enzymes (ascorbate peroxidase, guaiacol peroxidase, catalase). The activity of Cu/ZnSOD (Cu/Zn superoxide dismutase) and MnSOD in lettuce leaves followed the concentrations of Zn and Mn. In acidic quartz sand low avail-ability of Fe increased the cobalt (Co) and nickel (Ni) concentrations in let-tuce, but Fe chelates decreased them. EDTA increased the solubility of Cd and Pb in calcareous soils, but not their uptake. The biodegradation of EDDS was not affected by the complexed element, and [S,S]-EDDS was biodegraded within 28 days in calcareous soils. EDDS(mix) was more recalcitrant, and after 56 days of incubation water-soluble elements (Fe, Mn, Zn, Cu, Co, Ni, Cd and Pb) corresponded to 10% of the added EDDS(mix) concentration.

Experimental studies on a two stage pulse tube cryocooler reaching 2.5K

A two stage Pulse Tube Cryocooler (PTC) is designed and fabricated which reaches a no-load temperature of 2.5K in the second stage and similar to 60 K in the first stage respectively. The system provides a cooling power of similar to 250 mW at 5K in the second stage. Stainless steel meshes (size 200) and lead (Pb) granules are used as the first stage regenerator materials and combination of Pb with Er3Ni / HoCu2 are used as the second stage regenerator materials. The system operates at 1.6 Hz using a 6 kW water cooled helium compressor. Studies conducted by varying the dimensions of Pulse Tubes and regenerators show that the dimensions of the Pulse Tubes are more critical to the performance of the Cryocooler than those of the regenerators. Experimental studies show that the optimum volume ratios of Er3Ni to Pb and HoCu2 to Pb in the second stage regenerator should be 3:2 and 2:3 respectively for the best performance. Further, systems with HoCu2 performed better than those with Er3Ni. The theoretical analysis of the system has been carried out using a simple isothermal model. The experimentally measured cooling powers are in good agreement with the theoretical predictions.

The effects of humidity on tin whisker growth by immersion tin plating and tin solder dipping surface finishes

The drive to replace lead (Pb) from electronics has led to the replacement of tin (Sn) alloys as the terminal plating for electronic devices. However, the deposition of Sn based alloys as the component surface finish tends to induce Sn whisker that causes unintended electric shorts when the conductive whiskers grow across to the adjacent conductor. Internal stress is considered as the driving force that causes the growth of Sn whiskers. In this study, stress type of elevated temperature/ humidity exposure at 55C/85%RH with the storage for up to 24 months was conducted to define the acceleration factor in samples with deposition of immersion Sn plating and Sn solder dipping. The addition of Nickel (Ni) under-layer was also applied to examine the correlation to field conditions. The results showed that the whisker length increased in high humidity irrespective of the deposition methods. It was also shown that pure Sn solder dipping mitigated the whisker growth but does not completely prevent it when alloying Sn with 0.4%wtCu. Additionally, Ni under-layer was indicated to be more efficient in mitigating the growth of whisker by prolonging the incubation time for whisker formation.

Investigations of a two-stage pulse tube cryocooler operating down to 2.5K

A two-stage pulse tube cryocooler (PTC) which produces a no-load temperature of similar to 2.5 K in its second stage at an operating frequency of 1.6 Hz has been designed and fabricated. The second stage of the system provides a refrigeration power of similar to 250 mW at 5.0 K. The system uses stainless steel meshes (mesh size 200) along with lead (Pb) granules and combinations of Pb, Er3Ni, and HoCu2 as the first and second stage regenerator materials, respectively. Experimental studies have been carried out on different pulse tube configurations by varying the dimensions of the pulse tubes and regenerators to arrive at the best one, which leads to the lowest no-load second stage cold head temperature. Using this configuration, detailed experimental studies have been conducted by varying the volume percentage ratios of the second stage regenerator materials such as HoCu2, Er3Ni, and Pb (with an average grain size of similar to 250 mu m). This article presents the results of our experimental studies on cryocoolers with the regenerator material arranged in layered structures. Comparative studies have also been presented for specific cases where the regenerator materials are arranged as a homogeneous mixture in the second stage. The experimental results clearly indicate that the design of PTCs should use only layered structures of regenerator materials and not homogenous mixtures.

Optical and Morphological Properties of Sol Gel derived Titanium dioxide Films

Titanium oxide (Titania) thin films were synthesized on different substrates via the sol-gel dip-coating method using alkoxide solution. Some selected samples were also prepared with different percentage of Lead (Pb). The influence of Pb addition in precursor sol on the optical properties of titanium dioxide thin films was studied. The optical transmittance in the visible region has increased with increase in weight percentage of lead. The refractive index was slightly decreased with Pb addition. Crystallization of these coatings was achieved through thermal annealing at temperatures above 400 degrees C. The structural properties and surface morphology of the crystallized coatings were studied by Scanning Electron Microscopy. Increase in average grain size from 250 nm to 350 nm with increase in Pb concentration is observed. Films were appeared to more coarse with increase in Pb addition. An increase in Pb addition resulted increase in average roughness from 12 nm to 25 nm.

Heavy metal pollution in sediments at shipbreaking area of Bangladesh

The research was carried out to assess the trace metal concentration in sediments of ship breaking area in Bangladesh. The study areas were separated into Ship breaking Zone and Reference Site for comparative analysis. Metals like Iron ( Fe) was found at 11932 to 41361.71µg.g-1 in the affected site and 3393.37 µg.g-1 in the control site. Manganese (Mn) varied from 2.32 to 8.25 µg.g-1 in the affected site where as it was recorded as 1.8 µg.g-1 in the control area. Chromium(Cr), Nickel (Ni), Zinc(Zn) and Lead (Pb) were also varied from 22.89 to 86.72 µg.g-1; 23.12 to 48.6;83.78 to 142.85 and 36.78 to 147.83 µg.g-1 respectively in the affected site whereas these were recorded as 19; 3.98; 22.22 and 8.82 µg.g-1 in the control site. Copper (Cu); Cadmium (Cd) and Mercury (Hg) concentration were varied from 21.05 to 39.85; 0.57 to 0.94 and 0.05 to 0.11 µg.g-1 in the affected site and 33.0; 0.115 and 0.01 µg.g-1 in the control site. It may conclude that heavy metal pollution in sediments at ship breaking area of Bangladesh is at alarming stage.

Helmholtz Fermi surface harmonics: an efficient approach for treating anisotropic problems involving Fermi surface integrals

We present a new efficient numerical approach for representing anisotropic physical quantities and/or matrix elements defined on the Fermi surface (FS) of metallic materials. The method introduces a set of numerically calculated generalized orthonormal functions which are the solutions of the Helmholtz equation defined on the FS. Noteworthy, many properties of our proposed basis set are also shared by the FS harmonics introduced by Philip B Allen (1976 Phys. Rev. B 13 1416), proposed to be constructed as polynomials of the cartesian components of the electronic velocity. The main motivation of both approaches is identical, to handle anisotropic problems efficiently. However, in our approach the basis set is defined as the eigenfunctions of a differential operator and several desirable properties are introduced by construction. The method is demonstrated to be very robust in handling problems with any crystal structure or topology of the FS, and the periodicity of the reciprocal space is treated as a boundary condition for our Helmholtz equation. We illustrate the method by analysing the free-electron-like lithium (Li), sodium (Na), copper (Cu), lead (Pb), tungsten (W) and magnesium diboride (MgB2)

Aspects of mineral composition of male and female Heterobranchus bidorsalis adults exposed to different concentrations of Bonny-light crude oil

Studies were carried out to assess some macro and trace elements of mineral composition of the male and female Heterobranchus bidorsalis adults exposed to graded concentrations (1.00-8.00m/L-1) of Bonny-light crude oil (BLCO). The experiment was monitored for 4 days (toxicity) and 42days (recovery) periods. Significant decreases (P < 0.05)in the sodium (Na), potassium (K), magnesium (Mg), calcium (Ca), phosphorus (P), zinc (Zn), iron (Fe), vanadium (Va), lead (Pb) and manganese (Mn) contents of the male H. bidorsalis corresponded with the increasing concentrations of BLCO. In contrast, the female fishes recorded significant increases (P < 0.05) in the values of the above elements in their tissues as the concentrations of BLCO increased. Furthermore, the values of Na, K, Mg, Ca, P, Zn, Fe, Va, Pb and Mn recorded in the male fishes where generally lower than those of their female counterparts and the control fish. Increased values of these elements were also recorded during the recovery periods (days 14, 28 and 42) of this study in the magnitudes of 15% at day 14, 20% at day 28 and 20% at day 42. This implied that the removal of crude oil stress during this period improved the quantity of these minerals deposited in the fish tissues. The highest percent proportion of Zn and the lowest proportion of Pb recorded in both male and female H. bidorsalis adults agreed with the report of other workers for other fish species. KEYWORDS: Heterobranchus bidorsalis, Mineral composition, Bonny-light crude oil, Toxicity, Recovery.

Digestão nitro-sulfúrica de fígado de peixe Mugil liza em forno de micro-ondas com radiação focalizada para determinar elementos de interesse ambiental por ICPMS

O presente estudo propõe uma metodologia para dissolução de tecidos biológicos em sistema de micro-ondas com radiação focalizada e posterior análise elementar por espectrometria de massas com plasma acoplado indutivamente (ICPMS). Foram determinados os elementos arsênio (As), cádmio (Cd), cobre (Cu), chumbo (Pb), níquel (Ni), vanádio (V) e zinco (Zn). A matriz nitro-peroxo-sulfúrica foi comparada com outra sem o ácido sulfúrico e apresentou melhor padrão de recuperação (acima de 90%) na quantificação dos elementos certificados no material de referência TORT-2. As interferências causadas pela presença do ácido sulfúrico na matriz digestora foram contornadas com o uso da célula de reação/colisão com gás hélio (He) e adição deste ácido na composição da curva de quantificação. O ganho analítico proporcionado pelo método de digestão em matriz sulfúrica, em sistema não pressurizado, baseia-se no incremento da temperatura reacional e na degradação completa da matéria orgânica. As digestões tradicionalmente realizadas para quantificação por ICPMS, compostas unicamente de ácido nítrico (HNO3) e peróxido de hidrogênio (H2O2), não apresentam a mesma eficiência na degradação da matéria orgânica em sistemas abertos. Por fim, este método foi aplicado satisfatoriamente em amostras de tecido hepático de peixe Mugil liza (tainha), comprovando sua eficiência em monitorar a bioacumulação, utilizando-se da sensibilidade da técnica multielementar de ICPMS