Abrasion control on dune colour: Muleshoe Dunes, SW USA

The Muleshoe Dunes, an east-west trending dunefield on the border separating Texas and New Mexico, consist of two distinct components: a white (carbonate rich) component and an overlying pink (quartz rich) component. The pink component exhibits significant spatial variation in redness. The reddest sands, in the western part of the dunefield, decrease in redness towards the east. This gradient is thought to result from abrasion of all iron-rich, red clay coating as the sediments were transported eastward by Late Quaternary aeolian processes. The effects of aeolian abrasion on the spectral signature and surface texture of the sediments were examined using laboratory abrasion experiments. Changes in spectral reflectance of abrasion samples from the laboratory were compared to field samples that were abraded naturally because of sediment transport. The changes resulting from increased time of abrasion are similar to those observed with increased distance downwind in the dunefield. These results suggest that downwind abrasion can explain the pattern of dune colour in the Muleshoe Dunes, although this does not preclude other possible causes. (C) 2008 Elsevier B.V. All rights reserved.

Sequential extraction and single-step cold-acid extraction: A feasibility study for use with freshwater-canal sediments

This investigation examines metal release from freshwater sediment using sequential extraction and single-step cold-acid leaching. The concentrations of Cd, Cr, Cu, Fe, Ni, Pb and Zn released using a standard 3-step sequential extraction (Rauret et al., 1999) are compared to those released using a 0.5 M HCl; leach. The results show that the three sediments behave in very different ways when subject to the same leaching experiments: the cold-acid extraction appears to remove higher relative concentrations of metals from the iron-rich sediment than from the other two sediments. Cold-acid extraction appears to be more effective at removing metals from sediments with crystalline iron oxides than the "reducible" step of the sequential extraction. The results show that a single-step acid leach can be just as effective as sequential extractions at removing metals from sediment and are a great deal less time-consuming.

Abrasion control on dune colour: Muleshoe Dunes, SW USA

The Muleshoe Dunes, an east-west trending dunefield on the border separating Texas and New Mexico, consist of two distinct components: a white (carbonate rich) component and an overlying pink (quartz rich) component. The pink component exhibits significant spatial variation in redness. The reddest sands, in the western part of the dunefield, decrease in redness towards the east. This gradient is thought to result from abrasion of all iron-rich, red clay coating as the sediments were transported eastward by Late Quaternary aeolian processes. The effects of aeolian abrasion on the spectral signature and surface texture of the sediments were examined using laboratory abrasion experiments. Changes in spectral reflectance of abrasion samples from the laboratory were compared to field samples that were abraded naturally because of sediment transport. The changes resulting from increased time of abrasion are similar to those observed with increased distance downwind in the dunefield. These results suggest that downwind abrasion can explain the pattern of dune colour in the Muleshoe Dunes, although this does not preclude other possible causes. (C) 2008 Elsevier B.V. All rights reserved.

Geologia e geoquimica do complexo cambaizinho, sao gabriel - RS

Mapeamentos geológicos feitos pelo autor na região do Arroio Cambaizinho - são Gabriel/RS, resultaram na definição do Complexo Cambaizinho, representado pelas seqüências meta-sedimentar e máfica-ultramáfica, intimamente associadas ao longo de toda a extensão da associação supracrustal. A seqüência meta-se dimentar é constitu1da por gnaisses quartzo-feldspáticos dominan tes, anfibolitos bandados e quartzitos subordinados, derivados de sedimentos areno-pelítico-carbonatados estruturados, de forma ritmica em ambiente subaquoso. Niveis composicionais de ocorrência restrita contendo estaurolita, definem o grau metamórfico (médio) para esta região. Intercalações de serpentinitos, xistos magnesianos variados e anfibolitos a granulação fina, na forma de camadas e/ou lentes interestratificadas nos meta-sedimentos indicam suas derivações a partir de derrames e/ou intrusões , ígneas de pequena profundidade de composição básica-ultrabásica. Este juntamente com níveis de sedimentos qu1micos intercalados e corpos de gabros, constituem a seqüência máfica-ultramáfica. O complexo, representa o segmento norte de um cintu rão supracrustal polideformado de forma geométrica aproximadamente linear, com orientação NNE, que se extende desde a localidade de Passo do Ivo, situado mais a sul, até a região objeto deste trabalho. Quatro fases de deformação dúcteis foram das para a área, estando as duas primeiras (Dl e D2) identifica associadas xx aos eventos metamórficos regionais Ml e M2. O metamorfismo mais antigo (Ml), assinalado por paragêneses diagnósticas em metapelitos alcançou o fácies anfibolito (zona da estaurolita), estando representado em outras litologias pela ocorrência de olivina metamórfica em paragênese com tremolita e/ou talco (meta-serpentinitos) e hornblenda mais oligoclásio/andesina em meta-básicas. O M2, mais jovem, atingiu o fácies xistos verdes, cujas assembléias mineralógicas se associam à foliação S2, de distribuição ir regular ao longo do cinturão. As condições fisicas de Ml foram de média P/T, similares às do metamorfismo Dalradiano. Intrusões graniticas na forma de lâminas (corpos ta bulares) durante a segunda fase de deformação D2, datados pelo mé todo Rb/Sr em 661 :: 29 Ma e agrupados sob a denominação de Granatóides Sanga do Jobim, fornecem idades mínimas para o complexo. Os vários grupos composiciconais da seqüência máfic~ -ultramáfica, individualizados com base em critérios petrográf~ cos e conteúdo de elementos maiores correspondem a: serpentinitos e olivina-talco ultramafitos (cumulados komatilticos); xis tos magnesianos à talco e clorita e anfibólio xistos (komatiitos); clorita-hornblenda xistos (basaltos komatiiticos), litos e metagabros (basaltos e gabros tolelticos). anfibo Estes vários tipos litológicos foram originados através de diferentes graus de fusão parcial do manto como indicado pelo hiato composicional de MgO (11 à 17%) e os diferentes padrões de ETR existentes entre os anfibolitos/metagabros (toleitos) e os serpentinitos/xistos magnesianos (komatiltos).As variações composicionais no interior de cada grupo, foram controladas pelo fracionamento (acumulação ou extração) de olivina e pouco ortopiroxênio (serpentinitos e olivina-talco ultramafitos)clinopiroxênios (clorita e anfibólios xistos, clorita hornblenda xistos), clinopiroxênio e plagioclásio (anfibolitos e metagabros). As abundâncias e os padrões de ERTL (elementos terras raras leves) enriquecidos, juntamente com os baixos valores das razões A1203/Ti02 e CaO/Ti02 das amostras de xistos magnesiinos das camadas A e B sugerem derivações deste material a partir de baixas percentagens de fusão de um manto enriquecido em mentos incompatíveis. As anomalias negativas de Ce e Eu na ele maio ria das rochas da seqüência máfica-ultramáfica indicam que protólitos ígneossofreram alterações em ambiente submarino.

Caracterização magnética e estrutural de filmes depositados por gaiola catódica

Iron nitrite films, with hundred of nanometers thick, were deposited using the Cathodic cage plasma nitriding method, with a N2/H2 plasma, over a common glass substract. The structure, surface morphology and magnetic properties were investigated using X-ray diffractometry (XRD), atomic force microscopy (AFM) and vibrating sample magnetometer (VSM). XRD shows the formation of γ FeN phase and a combination of ζFe2N + ɛFe3N phases. The film s saturation magnetization and coercivity depends on morphology, composition, grain size and treatment temperature. Temperature raising from 250 ºC to 350 ºC were followed by an increase in saturation magnetization and film s surface coercivity on the parallel direction in relative proportion. This fact can be attributed to the grain sizes and to the different phases formed, since iron rich fases, like the ɛFe3N phase, emerges more frequently on more elevated treatment s temperature. Using this new and reasonably low cost method, it was possible to deposit films with both good adhesion and good magnetic properties, with wide application in magnetic devices

Caracterização dos eletrocatalisadores LaMnO3, LaFeO3, LaFe0,2Mn0,8O3 E La0,5Fe0,5MnO3 preparados por autocombustão assistida por microondas para cátodos de células a combustível do tipo SOFC

Materials consisting of perovskite-type oxides (ABO3) have been developed in this work for applications in fuel cell cathodes of solid oxide type (SOFC). These ceramic materials are widely studied for this type of application because they have excellent electrical properties, conductivity and electrocatalytic. The oxides LaMnO3, LaFeO3, LaFe0.2Mn0.8O3 e La0.5Fe0.5MnO3 were synthesized by the method of microwave assisted combustion and after sintering at 800°C in order to obtain the desired phases. The powders were characterized by thermogravimetry (TG), X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) and voltammetric analysis (cyclic voltammetry and polarization curves). The results obtained by XRF technique showed that the microwave synthesis method was effective in obtaining doping oxides with values near stoichiometric. In general, powders were obtained with particle size less than 0.5 μm, having a porous structure and uniform particle size distribution. The particles showed spherical form, irregular and crowded of varying sizes, according to the analysis of SEM. The behavior of the oxides opposite the thermal stability was monitored by thermogravimetric curves (TG), which showed low weight loss values for all samples, especially those of manganese had its structure. By means of Xray diffraction of the samples sintered at 800°C was possible to observe the formation of powders having high levels of crystallinity. Furthermore, undesirable phases such as La2O3 and MnOx were not identified in the diffractograms. These phases block the transport of oxygen ions in the electrode/electrolyte interface, affecting the electrochemical activity of the system. The voltammetric analysis of the electrocatalysts LF-800, LM-800, LF2M8-800 e L5F5M-800 revealed that these materials are excellent electrical conductors, because it increased the passage of electrical current of the working electrode significantly. Best performance for the oxygen reduction reaction was observed with iron-rich structures, considering that the materials obtained have characteristics suitable for use in fuel cell cathodes of solid oxide type

Friction and wear properties of functionally graded aluminum matrix composites

Aluminum matrix composites are currently considered as promising materials for tribological applications in the automotive, aircraft and aerospace industries due to their great advantage of a high strength-to-weight ratio. A superior combination of surface and bulk mechanical properties can be attained if these composites are processed as functionally graded materials (FGM's). In this work, homogeneous aluminum based matrix composite, cast by gravity, and aluminum composites with functionally graded properties, obtained by centrifugal cast, are tested against nodular cast iron in a pin-on-disc tribometer. Three different volume fractions of SiC reinforcing particles in each FGM were considered in order to evaluate their friction and wear properties. The sliding experiments were conducted without lubrication, at room temperature, under a normal load of 5 N and constant sliding speed of 0.5 ms-1. The worn surfaces as well as the wear debris were characterized by SEM/EDS and by atomic force microscopy (AFM). The friction coefficient revealed a slightly decrease (from 0.60 to 0.50) when FGM's are involved in the contact instead of the homogeneous composite. Relatively low values of the wear coefficient were obtained for functionally graded aluminum matrix composites (≈10-6 mm3N-1 m-1), which exhibited superior wear resistance than the homogeneous composite and the opposing cast iron surface. Characterization of worn surfaces indicated that the combined effect of reinforcing particles as load bearing elements and the formation of protective adherent iron-rich tribolayers has a decisive role on the friction and wear properties of aluminum matrix composites.

Diagênese da Formação Corumbataí na Mina Partezani, Rio Claro - SP

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mineralogical and geochemical influences on sediment color of Amazon wetlands analyzed by visible spectrophotometry

Com base em dados sedimentológicos e geoquímicos, este trabalho relaciona medições espectrofotométricas com a composição do sedimento, e sua aplicação em estudos paleoecológicos das áreas alagáveis da Amazônia. Os dados CIELAB estão diretamente relacionados à composição mineralógica e química dos sedimentos, especialmente quartzo, oxihidróxidos e sulfetos de ferro, e carbono orgânico total. Conteúdos de carbono orgânico total entre 0,4-1%, 1-2%, 3-5% e 15-40% foram relacionados a dados de L* (luminosidade) de 27, 26-15, 7-10 e 7 ou menos, respectivamente. Os valores CIELAB de um depósito com turfa em Marabá, Pará, foram proporcionais a variações no conteúdo de quartzo e carbono orgânico total, mas mudanças nas zonas de cores similares, principalmente nos valores de +a* (vermelho) e +b* (amarelo), ao longo de outros depósitos em Calçoene, Amapá e Soure, Pará, indicam uma relação muito próxima entre os conteúdos de carbono orgânico total, oxihidróxidos e sulfetos de ferro. Além disso, o diagrama Q7/4 (razão entre valores percentuais de refletância em 700 nm e 400 nm, juntamente com dados de L*) indicou sedimentos ricos em ferro para a fácies lama bioturbada no depósito do Amapá, fácies lama bioturbada e areia bioturbada do depósito de Soure, e das fácies areia com laminação cruzada e areia maciça do depósito de Marabá. Ainda, sedimentos ricos em carbono orgânico foram encontrados na lama bioturbada no depósito do Amapá, fácies heterolítica lenticular e lama bioturbada do depósito de Soure, e das fácies lama laminado e turfa do depósito de Marabá. Na área de Marabá, os dados sugerem uma influência autóctone com formação de turfa. As áreas de zonas úmidas costeiras no Marajó e Amapá representam o desenvolvimento típico de planícies de maré com formação de sulfetos e oxihidróxidos de ferro durante alternâncias entre inundação e exposição.

Caracterização mineralógica e geoquímica e estudo das transformações de fase do caulim duro da região do Rio Capim, Pará

A região do Rio Capim (Nordeste do Estado do Pará), destaca-se nacionalmente por suas grandes reservas de caulim para cobertura de papel. O minério extraído está localizado, em média, a 20 m de profundidade, recoberto por sedimentos argilo-arenosos da Formação Barreiras, e de um nível de caulim duro, também conhecido como flint ou semi-flint, considerado como estéril em função do teor de ferro elevado que inviabiliza sua aplicação para cobertura. Este trabalho objetiva a caracterização mineralógica e geoquímica do caulim duro além de acompanhar as transformações mineralógicas sofridas em função da temperatura de queima, com vistas a sua possível utilização como matéria-prima cerâmica. Foram utilizados dois tipos de caulim duro como material de partida, em função dos teores de ferro: o Caulim Duro Branco (CDB) e o Caulim Duro Ferruginoso (CDF), este último com teor de Fe2O3 de 10,36%. Os resultados indicam composição mineralógica dominada por caulinita, além de anatásio como acessório. No CDF ocorrem ainda goethita e hematita. Os estudo das transformações térmicas indicam que o início de formação de mullita se dá em temperaturas diferentes para as amostras estudadas.

Erosion rates and landscape evolution of the lowlands of the Upper Paraguay river basin (Brazil) from cosmogenic Be-10

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Statistische Betrachtungen und mößbauerspektroskopische Untersuchungen von Ordnungszuständen in Biotiten

Im Mittelpunkt der vorliegenden Arbeit standen Untersuchungen zu strukturellen Ordnungs- und Unordnungsphänomenen an natürlichen, substitutionellen Mischkristallen. Aufgrund der enormen Vielfalt an potentiellen Austauschpartnern wurden hierfür Vertreter der Biotit-Mischkristallreihe "Phlogopit-Annit" ausgewählt. Ihr modulartiger Aufbau ermöglichte die gezielte Beschreibung von Verteilungsmustern anionischer und kationischer Merkmalsträger innerhalb der Oktaederschicht der Biotit-Mischkristalle. Basierend auf der postulierten Bindungsaffinität zwischen Mg2+ und F- einerseits und Fe2+ und OH- andererseits, wurde die strukturelle Separation einer Fluor-Phlogopit-Komponente als primäre Ausprägungsform des Mg/F-Ordnungsprinzips abgeleitet. Im Rahmen dieser Modellvorstellung koexistieren im makroskopisch homogenen Biotit-Mischkristall Domänen zweier chemisch divergenter Phasen nebeneinander: Eine rein Mg2+/F- - führende Phlogopit-Phase und eine Wirtskristallphase, die mit fortschreitender Separation bzw. Entmischung der erstgenannten Phase sukzessive reicher an einer hydroxylführenden eisenreichen Annit-Komponente wird. Zwecks numerischer Beschreibung diverser Stadien der Entmischungsreaktion wurden die Begriffe der "Relativen" und "Absoluten Domänengröße" eingeführt. Sie stellen ein quantitatives Maß zur Beurteilung der diskutierten Ordnungsphänomene dar. Basierend auf einem sich stetig ändernden Chemismus der Wirtskristallphase kann jeder Übergangszustand zwischen statistischer Verteilung und vollständiger Ordnung durch das korrespondierende Verteilungsmuster der interessierenden Merkmalsträger ( = Nahordnungskonfiguration und Besetzungswahrscheinlichkeit) charakterisiert und beschrieben werden. Durch mößbauerspektroskopische Untersuchungen konnten die anhand der entwickelten Modelle vorhergesagten Ausprägungsformen von Ordnungs-/Unordnungsphänomenen qualitativ und quantitativ verifiziert werden. Es liessen sich hierbei zwei Gruppen von Biotit-Mischkristallen unterscheiden. Eine erste Gruppe, deren Mößbauer-Spektren durch den OH/F-Chemismus als dominierendes Differenzierungsmerkmal geprägt wird, und eine zweite Gruppe, deren Mößbauer-Spektren durch Gruppierungen von höherwertigen Kationen und Vakanzen ( = Defektchemie) geprägt wird. Auf der Basis von Korrelationsdiagrammen, die einen numerischen und graphischen Bezug zwischen absoluter und relativer Domänengröße einerseits und experimentell zugänglichem Mößbauer-Parameter A (= relativer Flächenanteil, korrespondierend mit der Besetzungswahrscheinlichkeit einer bestimmten Nahordnungs-konstellation) andererseits herstellen, konnten für die erste Gruppe die Volumina der beiden miteinander koexistierenden Komponenten "Hydroxyl-Annit reicher Wirtskristall" und "Fluor-Phlogopit" exakt quantifiziert werden. Das Spektrum der untersuchten Proben umfasste hierbei Kristallspezies, die einerseits durch geringe bis mittlere Mg2+/F- - bzw. Fe2+/OH- -Ordnungsgrade gekennzeichnet sind, andererseits eine nahezu vollständige Ordnung der interessierenden Merkmalsträger Mg2+, Fe2+, OH- und F- widerspiegeln. Desweiteren konnte der Nachweis geführt werden, dass für ausgewählte Proben eine quantitative Bestimmung der Defektvolumina möglich ist.

Petrogenetic evolution of Uralian-Alaskan-type mafic-ultramafic complexes in the southern and middle Urals, Russia

The PhD thesis at hand consists of three parts and describes the petrogenetic evolution of Uralian-Alaskan-type mafic ultramafic complexes in the Ural Mountains, Russia. Uralian-Alaskan-type mafic-ultramafic complexes are recognized as a distinct class of intrusions. Characteristic petrologic features are the concentric zonation of a central dunite body grading outward into wehrlite, clinopyroxenite and gabbro, the absence of orthopyroxene and frequently occurring platinum group element (PGE) mineralization. In addition, the presence of ferric iron-rich spinel discriminates Uralian-Alaskan-type complexes from most other mafic ultramafic rock assemblages. The studied Uralian-Alaskan-type complexes (Nizhnii Tagil, Kytlym and Svetley Bor) belong to the southern part of a 900 km long, N–S-trending chain of similar intrusions between the Main Uralian Fault to the west and the Serov-Mauk Fault to the east. The first chapter of this thesis studies the evolution of the ultramafic rocks tracing the compositional variations of rock forming and accessory minerals. The comparison of the chemical composition of olivine, clinopyroxene and chromian spinel from the Urals with data from other localities indicates that they are unique intrusions having a characteristic spinel and clinopyroxene chemistry. Laser ablation-ICPMS (LA-ICPMS ) analyses of trace element concentrations in clinopyroxene are used to calculate the composition of their parental melt which is characterized by enriched LREE (0.5-5.2 prim. mantle) and other highly incompatible elements (U, Th, Ba, Rb) relative to the HREE (0.25-2.0 prim. mantle). A subduction-related geotectonic setting is indicated by a positive anomaly for Sr and negative anomalies for Ti, Zr and Hf. The mineral compositions monitor the evolution of the parental magmas and decipher differences between the studied complexes. In addition, the observed variation in LREE/HREE (for example La/Lu = 2-24) can be best explained with the model of an episodically replenished and erupted open magma chamber system with the extensive fractionation of olivine, spinel and clinopyroxene. The data also show that ankaramites in a subduction-related geotectonic setting could represent parental magmas of Uralian-Alaskan-type complexes. The second chapter of the thesis discusses the chemical variation of major and trace elements in rock-forming minerals of the mafic rocks. Electron microprobe and LA-ICPMS analyses are used to quantitatively describe the petrogenetic relationship between the different gabbroic lithologies and their genetic link to the ultramafic rocks. The composition of clinopyroxene identifies the presence of melts with different trace element abundances on the scale of a thin section and suggests the presence of open system crustal magma chambers. Even on a regional scale the large variation of trace element concentrations and ratios in clinopyroxene (e.g. La/Lu = 3-55) is best explained by the interaction of at least two fundamentally different magma types at various stages of fractionation. This requires the existence of a complex magma chamber system fed with multiple pulses of magmas from at least two different coeval sources in a subduction-related environment. One source produces silica saturated Island arc tholeiitic melts. The second source produces silica undersaturated, ultra-calcic, alkaline melts. Taken these data collectively, the mixing of the two different parental magmas is the dominant petrogenetic process explaining the observed chemical variations. The results further imply that this is an intrinsic feature of Uralian-Alaskan-type complexes and probably of many similar mafic-ultramafic complexes world-wide. In the third chapter of this thesis the major element composition of homogeneous and exsolved spinel is used as a petrogenetic indicator. Homogeneous chromian spinel in dunites and wehrlites monitors the fractionation during the early stages of the magma chamber and the onset of clinopyroxene fractionation as well as the reaction of spinel with interstitial liquid. Exsolved spinel is present in mafic and ultramafic rocks from all three studied complexes. Its composition lies along a solvus curve which defines an equilibrium temperature of 600°C, given that spinel coexists with olivine. This temperature is considered to be close to the temperature of the host rocks into which the studied Uralian-Alaskan-type complexes intruded. The similarity of the exsolution temperatures in the different complexes over a distance of several hundred kilometres implies a regional tectonic event that terminated the exsolution process. This event is potentially associated with the final exhumation of the Uralian-Alaskan-type complexes along the Main Uralian Fault and the Serov-Mauk Fault in the Uralian fold belt.

Non-coding keratin variants associate with liver fibrosis progression in patients with hemochromatosis

Background Keratins 8 and 18 (K8/K18) are intermediate filament proteins that protect the liver from various forms of injury. Exonic K8/K18 variants associate with adverse outcome in acute liver failure and with liver fibrosis progression in patients with chronic hepatitis C infection or primary biliary cirrhosis. Given the association of K8/K18 variants with end-stage liver disease and progression in several chronic liver disorders, we studied the importance of keratin variants in patients with hemochromatosis. Methods The entire K8/K18 exonic regions were analyzed in 162 hemochromatosis patients carrying homozygous C282Y HFE (hemochromatosis gene) mutations. 234 liver-healthy subjects were used as controls. Exonic regions were PCR-amplified and analyzed using denaturing high-performance liquid chromatography and DNA sequencing. Previously-generated transgenic mice overexpressing K8 G62C were studied for their susceptibility to iron overload. Susceptibility to iron toxicity of primary hepatocytes that express K8 wild-type and G62C was also assessed. Results We identified amino-acid-altering keratin heterozygous variants in 10 of 162 hemochromatosis patients (6.2%) and non-coding heterozygous variants in 6 additional patients (3.7%). Two novel K8 variants (Q169E/R275W) were found. K8 R341H was the most common amino-acid altering variant (4 patients), and exclusively associated with an intronic KRT8 IVS7+10delC deletion. Intronic, but not amino-acid-altering variants associated with the development of liver fibrosis. In mice, or ex vivo, the K8 G62C variant did not affect iron-accumulation in response to iron-rich diet or the extent of iron-induced hepatocellular injury. Conclusion In patients with hemochromatosis, intronic but not exonic K8/K18 variants associate with liver fibrosis development.

Mineralogical and isotopic record of diagenesis from the Opalinus Clay formation at Benken, Switzerland: Implications for the modeling of pore-water chemistry in a clay formation

Argillaceous rocks are considered to be a suitable geological barrier for the long-term containment of wastes. Their efficiency at retarding contaminant migration is assessed using reactive-transport experiments and modeling, the latter requiring a sound understanding of pore-water chemistry. The building of a pore-water model, which is mandatory for laboratory experiments mimicking in situ conditions, requires a detailed knowledge of the rock mineralogy and of minerals at equilibrium with present-day pore waters. Using a combination of petrological, mineralogical, and isotopic studies, the present study focused on the reduced Opalinus Clay formation (Fm) of the Benken borehole (30 km north of Zurich) which is intended for nuclear-waste disposal in Switzerland. A diagenetic sequence is proposed, which serves as a basis for determining the minerals stable in the formation and their textural relationships. Early cementation of dominant calcite, rare dolomite, and pyrite formed by bacterial sulfate reduction, was followed by formation of iron-rich calcite, ankerite, siderite, glauconite, (Ba, Sr) sulfates, and traces of sphalerite and galena. The distribution and abundance of siderite depends heavily on the depositional environment (and consequently on the water column). Benken sediment deposition during Aalenian times corresponds to an offshore environment with the early formation of siderite concretions at the water/sediment interface at the fluctuating boundary between the suboxic iron reduction and the sulfate reduction zones. Diagenetic minerals (carbonates except dolomite, sulfates, silicates) remained stable from their formation to the present. Based on these mineralogical and geochemical data, the mineral assemblage previously used for the geochemical model of the pore waters at Mont Terri may be applied to Benken without significant changes. These further investigations demonstrate the need for detailed mineralogical and geochemical study to refine the model of pore-water chemistry in a clay formation.