An architecture for adaptive replication-based multimedia streaming in P2P networks

This PhD thesis addresses the issue of scalable media streaming in large-scale networking environments. Multimedia streaming is one of the largest sink of network resources and this trend is still growing as testified by the success of services like Skype, Netflix, Spotify and Popcorn Time (BitTorrent-based). In traditional client-server solutions, when the number of consumers increases, the server becomes the bottleneck. To overcome this problem, the Content-Delivery Network (CDN) model was invented. In CDN model, the server copies the media content to some CDN servers, which are located in different strategic locations on the network. However, they require heavy infrastructure investment around the world, which is too expensive. Peer-to-peer (P2P) solutions are another way to achieve the same result. These solutions are naturally scalable, since each peer can act as both a receiver and a forwarder. Most of the proposed streaming solutions in P2P networks focus on routing scenarios to achieve scalability. However, these solutions cannot work properly in video-on-demand (VoD) streaming, when resources of the media server are not sufficient. Replication is a solution that can be used in these situations. This thesis specifically provides a family of replication-based media streaming protocols, which are scalable, efficient and reliable in P2P networks. First, it provides SCALESTREAM, a replication-based streaming protocol that adaptively replicates media content in different peers to increase the number of consumers that can be served in parallel. The adaptiveness aspect of this solution relies on the fact that it takes into account different constraints like bandwidth capacity of peers to decide when to add or remove replicas. SCALESTREAM routes media blocks to consumers over a tree topology, assuming a reliable network composed of homogenous peers in terms of bandwidth. Second, this thesis proposes RESTREAM, an extended version of SCALESTREAM that addresses the issues raised by unreliable networks composed of heterogeneous peers. Third, this thesis proposes EAGLEMACAW, a multiple-tree replication streaming protocol in which two distinct trees, named EAGLETREE and MACAWTREE, are built in a decentralized manner on top of an underlying mesh network. These two trees collaborate to serve consumers in an efficient and reliable manner. The EAGLETREE is in charge of improving efficiency, while the MACAWTREE guarantees reliability. Finally, this thesis provides TURBOSTREAM, a hybrid replication-based streaming protocol in which a tree overlay is built on top of a mesh overlay network. Both these overlays cover all peers of the system and collaborate to improve efficiency and low-latency in streaming media to consumers. This protocol is implemented and tested in a real networking environment using PlanetLab Europe testbed composed of peers distributed in different places in Europe.

Estado del arte en soluciones de virtualización : Sistemas gestores de Cloud: OpenNebula

En el presente proyecto se ha abordado la tarea de acercar las tecnologías existentes de plataformas de gestión de infraestructuras ofrecidas en la nube (Cloud Management Platform, aka CMP) al mundo empresarial. En concreto, se ha desplegado una solución de explotación de infraestructuras privadas en la nube (IaaS) enfocada a la gestión de un datacenter virtualizado, utilizando para ello soluciones completamente basadas en software libre, en concreto, OpenNebula.

Estado del arte en soluciones de virtualización/sistemas gestores cloud : OpenStack

Los servicios cloud se utilizan cada vez más en todo tipo de entornos, y la tendencia no hará sino acentuarse en los próximos años. Amazon AWS es líder de servicios IaaS y todos pretenden imitarles con éxito. OpenStack es una de las soluciones OpenSource con más apoyo de la comunidad y de sponsors de renombre. El presente proyecto introduce la arquitectura OpenStack y desarrolla un proyecto real de explotación IaaS basado en ésta.

An international university network for online teaching of pathology in Frenchspeaking countries

Introduction: Building online courses is a highly time consuming task for teachers of a single university. Universities working alone create high-quality courses but often cannot cover all pathological fields. Moreover this often leads to duplication of contents among universities, representing a big waste of teacher time and energy. We initiated in 2011 a French university network for building mutualized online teaching pathology cases, and this network has been extended in 2012 to Quebec and Switzerland. Method: Twenty French universities (see & for details), University Laval in Quebec and University of Lausanne in Switzerland are associated to this project. One e-learning Moodle platform (http://moodle.sorbonne-paris-cite.fr/) contains texts with URL pointing toward virtual slides that are decentralized in several universities. Each university has the responsibility of its own slide scanning, slide storage and online display with virtual slide viewers. The Moodle website is hosted by PRES Sorbonne Paris Cité, and financial supports for hardware have been obtained from UNF3S (http://www.unf3s.org/) and from PRES Sorbonne Paris Cité. Financial support for international fellowships has been obtained from CFQCU (http://www.cfqcu.org/). Results: The Moodle interface has been explained to pathology teachers using web-based conferences with screen sharing. The teachers added then contents such as clinical cases, selfevaluations and other media organized in several sections by student levels and pathological fields. Contents can be used as online learning or online preparation of subsequent courses in classrooms. In autumn 2013, one resident from Quebec spent 6 weeks in France and Switzerland and created original contents in inflammatory skin pathology. These contents are currently being validated by senior teachers and will be opened to pathology residents in spring 2014. All contents of the website can be accessed for free. Most contents just require anonymous connection but some specific fields, especially those containing pictures obtained from patients who agreed for a teaching use only, require personal identification of the students. Also, students have to register to access Moodle tests. All contents are written in French but one case has been translated into English to illustrate this communication (http://moodle.sorbonne-pariscite.fr/mod/page/view.php?id=261) (use "login as a guest"). The Moodle test module allows many types of shared questions, making it easy to create personalized tests. Contents that are opened to students have been validated by an editorial committee composed of colleagues from the participating institutions. Conclusions: Future developments include other international fellowships, the next one being scheduled for one French resident from May to October 2014 in Quebec, with a study program centered on lung and breast pathology. It must be kept in mind that these e-learning programs highly depend on teachers' time, not only at these early steps but also later to update the contents. We believe that funding resident fellowships for developing online pathological teaching contents is a win-win situation, highly beneficial for the resident who will improve his knowledge and way of thinking, highly beneficial for the teachers who will less worry about access rights or image formats, and finally highly beneficial for the students who will get courses fully adapted to their practice.

JXTA-Overlay P2P Platform and Its Application for Robot Control

The design of an efficient collaborative multirobot framework that ensures the autonomy and the individualrequirements of the involved robots is a very challenging task. This requires designing an efficient platform for inter-robot communication. P2P is a good approach to achieve this goal. P2P aims at making the communication ubiquitous thereby crossing the communication boundary and has many attractive features to use it as a platform for collaborative multi-robot environments. In this work, we present the JXTA Overlay P2P system and its application for robot control. Since JXTAOverlay is able to overcome Firewalls, Routers and NATs, it is possible to control end-devices in a WAN without changing the network security policy. We used JXTA-Overlay for the control of robot motors. We evaluated the proposed system by many experiments and have shown that the proposed system has a good performance and can be used successfully for the control of robot.

jxSensor: a sensor network integration layer for JXTA

Nowadays, Wireless Sensor Networks (WSN) arealready a very important data source to obtain data about the environment. Thus, they are key to the creation of Cyber-Physical Systems (CPS). Given the popularity of P2P middlewares as ameans to efficiently process information and distribute services, being able to integrate them to WSN¿s is an interesting proposal. JXTA is a widely used P2P middleware that allows peers to easily exchange information, heavily relying on its main architectural highlight, the capability to organize peers with common interests into peer groups. However, right now, approaches to integrate WSNs to a JXTA network seldom take advantage of peer groups. For this reason, in this paper we present jxSensor, an integrationlayer for sensor motes which facilitates the deployment of CPS¿s under this architecture. This integration has been done taking into account JXTA¿s idiosyncrasies and proposing novel ideas,such as the Virtual Peer, a group of sensors that acts as a single entity within the peer group context.

Extension and evaluation of JXTA protocols for supporting reliable P2P distributed computing

Peer-reviewed

Efficient Peer Selection in P2P JXTA-Based Platforms

Peer-reviewed

Improved Privacy-Preserving P2P Multimedia Distribution Based on Recombined Fingerprints

Peer-reviewed

Video transcoding in a distributed cloud computing environment

Video transcoding refers to the process of converting a digital video from one format into another format. It is a compute-intensive operation. Therefore, transcoding of a large number of simultaneous video streams requires a large amount of computing resources. Moreover, to handle di erent load conditions in a cost-e cient manner, the video transcoding service should be dynamically scalable. Infrastructure as a Service Clouds currently offer computing resources, such as virtual machines, under the pay-per-use business model. Thus the IaaS Clouds can be leveraged to provide a coste cient, dynamically scalable video transcoding service. To use computing resources e ciently in a cloud computing environment, cost-e cient virtual machine provisioning is required to avoid overutilization and under-utilization of virtual machines. This thesis presents proactive virtual machine resource allocation and de-allocation algorithms for video transcoding in cloud computing. Since users' requests for videos may change at di erent times, a check is required to see if the current computing resources are adequate for the video requests. Therefore, the work on admission control is also provided. In addition to admission control, temporal resolution reduction is used to avoid jitters in a video. Furthermore, in a cloud computing environment such as Amazon EC2, the computing resources are more expensive as compared with the storage resources. Therefore, to avoid repetition of transcoding operations, a transcoded video needs to be stored for a certain time. To store all videos for the same amount of time is also not cost-e cient because popular transcoded videos have high access rate while unpopular transcoded videos are rarely accessed. This thesis provides a cost-e cient computation and storage trade-o strategy, which stores videos in the video repository as long as it is cost-e cient to store them. This thesis also proposes video segmentation strategies for bit rate reduction and spatial resolution reduction video transcoding. The evaluation of proposed strategies is performed using a message passing interface based video transcoder, which uses a coarse-grain parallel processing approach where video is segmented at group of pictures level.

Load balancing in P2P smartphone based distributed IoT systems

With the new age of Internet of Things (IoT), object of everyday such as mobile smart devices start to be equipped with cheap sensors and low energy wireless communication capability. Nowadays mobile smart devices (phones, tablets) have become an ubiquitous device with everyone having access to at least one device. There is an opportunity to build innovative applications and services by exploiting these devices’ untapped rechargeable energy, sensing and processing capabilities. In this thesis, we propose, develop, implement and evaluate LoadIoT a peer-to-peer load balancing scheme that can distribute tasks among plethora of mobile smart devices in the IoT world. We develop and demonstrate an android-based proof of concept load-balancing application. We also present a model of the system which is used to validate the efficiency of the load balancing approach under varying application scenarios. Load balancing concepts can be apply to IoT scenario linked to smart devices. It is able to reduce the traffic send to the Cloud and the energy consumption of the devices. The data acquired from the experimental outcomes enable us to determine the feasibility and cost-effectiveness of a load balanced P2P smart phone-based applications.

Cloud computing contribution to manufacturing industry

Manufacturing industry has been always facing challenge to improve the production efficiency, product quality, innovation ability and struggling to adopt cost-effective manufacturing system. In recent years cloud computing is emerging as one of the major enablers for the manufacturing industry. Combining the emerged cloud computing and other advanced manufacturing technologies such as Internet of Things, service-oriented architecture (SOA), networked manufacturing (NM) and manufacturing grid (MGrid), with existing manufacturing models and enterprise information technologies, a new paradigm called cloud manufacturing is proposed by the recent literature. This study presents concepts and ideas of cloud computing and cloud manufacturing. The concept, architecture, core enabling technologies, and typical characteristics of cloud manufacturing are discussed, as well as the difference and relationship between cloud computing and cloud manufacturing. The research is based on mixed qualitative and quantitative methods, and a case study. The case is a prototype of cloud manufacturing solution, which is software platform cooperated by ATR Soft Oy and SW Company China office. This study tries to understand the practical impacts and challenges that are derived from cloud manufacturing. The main conclusion of this study is that cloud manufacturing is an approach to achieve the transformation from traditional production-oriented manufacturing to next generation service-oriented manufacturing. Many manufacturing enterprises are already using a form of cloud computing in their existing network infrastructure to increase flexibility of its supply chain, reduce resources consumption, the study finds out the shift from cloud computing to cloud manufacturing is feasible. Meanwhile, the study points out the related theory, methodology and application of cloud manufacturing system are far from maturity, it is still an open field where many new technologies need to be studied.

Identification of Network-Based Risk Factors Associated with Gonorrhea

The evolving antimicrobial resistance coupled with a recent increase in incidence highlights the importance of reducing gonococcal transmission. Establishing novel risk factors associated with gonorrhea facilitates the development of appropriate prevention and disease control strategies. Sexual Network Analysis (NA), a novel research technique used to further understand sexually transmitted infections, was used to identify network-based risk factors in a defined region in Ontario, Canada experiencing an increase in the incidence of gonorrhea. Linear network structures were identified as important reservoirs of gonococcal transmission. Additionally, a significant association between a central network position and gonorrhea was observed. The central participants were more likely to be younger, report a greater number of risk factors, engage in anonymous sex, have multiple sex partners in the past six months and have sex with the same sex. The network-based risk factors identified through sexual NA, serving as a method of analyzing local surveillance data, support the development of strategies aimed at reducing gonococcal spread.