Infrared spectroscopic investigation of the effects of titania photocatalyst on the degradation of linear low density polyethylene film for commercial applications

There is a need in industry for a commodity polyethylene film with controllable degradation properties that will degrade in an environmentally neutral way, for applications such as shopping bags and packaging film. Additives such as starch have been shown to accelerate the degradation of plastic films, however control of degradation is required so that the film will retain its mechanical properties during storage and use, and then degrade when no longer required. By the addition of a photocatalyst it is hoped that polymer film will breakdown with exposure to sunlight. Furthermore, it is desired that the polymer film will degrade in the dark, after a short initial exposure to sunlight. Research has been undertaken into the photo- and thermo-oxidative degradation processes of 25 ìm thick LLDPE (linear low density polyethylene) film containing titania from different manufacturers. Films were aged in a suntest or in an oven at 50 °C, and the oxidation product formation was followed using IR spectroscopy. Degussa P25, Kronos 1002, and various organic-modified and doped titanias of the types Satchleben Hombitan and Hunstsman Tioxide incorporated into LLDPE films were assessed for photoactivity. Degussa P25 was found to be the most photoactive with UVA and UVC exposure. Surface modification of titania was found to reduce photoactivity. Crystal phase is thought to be among the most important factors when assessing the photoactivity of titania as a photocatalyst for degradation. Pre-irradiation with UVA or UVC for 24 hours of the film containing 3% Degussa P25 titania prior to aging in an oven resulted in embrittlement in ca. 200 days. The multivariate data analysis technique PCA (principal component analysis) was used as an exploratory tool to investigate the IR spectral data. Oxidation products formed in similar relative concentrations across all samples, confirming that titania was catalysing the oxidation of the LLDPE film without changing the oxidation pathway. PCA was also employed to compare rates of degradation in different films. PCA enabled the discovery of water vapour trapped inside cavities formed by oxidation by titania particles. Imaging ATR/FTIR spectroscopy with high lateral resolution was used in a novel experiment to examine the heterogeneous nature of oxidation of a model polymer compound caused by the presence of titania particles. A model polymer containing Degussa P25 titania was solvent cast onto the internal reflection element of the imaging ATR/FTIR and the oxidation under UVC was examined over time. Sensitisation of 5 ìm domains by titania resulted in areas of relatively high oxidation product concentration. The suitability of transmission IR with a synchrotron light source to the study of polymer film oxidation was assessed as the Australian Synchrotron in Melbourne, Australia. Challenges such as interference fringes and poor signal-to-noise ratio need to be addressed before this can become a routine technique.

Alternative film production

Typically a film producer expects the director and actors to 'do their job' within a scheduled timeframe. Rather than expecting the creative principals to just deliver, a production model can be tailored to help this creative team produce successful outcomes. This research paper contrasts alternative production models with a traditional (or standard) production and presents possibilities for producers to emphasise the collaborative potential for their production.

2006 International digital art awards : Beijing film academy galleries, China

The field was the curation of new media within large-scale exhibition practice for Chinese audiences. The context was improved understandings of the intertwining cultures and concerns of Chinese and Western contemporary practitioners. The research uncovered a range of connective and dialogical concerns around cultural displacement and re-identification, germane to the chosen group of media artists. The methodology was principally practice-led. The research brought together 31 practitioners from Asian, European and Australasian cultures within a major highly visible Chinese exhibition context. By identifying and promoting a distinct commonality within difference amongst the diverse practitioners the exhibition successfully activated a global dialogue that incorporated environmental and cultural identity agendas within a major Chinese educational and public context - thereby promulgating cross-cultural understanding, despite the often oppressive shadowing of domestic political processes. The project was developed under the international aegis of IDA Projects (established since 1999) and was substantially supported by the Fine Art Department of the Beijing Film Academy, QUT Precincts and Platform China Art Institute. It built upon IDA’s 2005 inaugural new media exhibition at the ‘Today Art’ Museum in Beijing – now recognised as one of the leading art spaces in China. Numerous peer-reviewed grants won included the Australian Embassy in China and the Australia China Council. Through subsequent invitations from external curators the work then traveled in a range of reconfigured formats to other major venues including the Block Gallery at QUT, Brisbane and ZAIM Artspace, Yokohama Japan. A major catalogue with authoritative essays was also printed.

Film, cinema, screen

Screen industries around the globe are evolving. While technological change has been slower to take effect upon the Australian film industry than other creative sectors such as music and publishing, all indications suggest that local screen practices are in a process of fundamental change. Fragmenting audiences, the growth of digital video, distribution and exhibition, the potential for entirely new forms of cultural expression, the proliferation of multi-platforms, and the importance of social networking and viral marketing in promoting products, are challenging traditional approaches to ‘film making’. Moreover, there has been a marked transition in government policy rationales and funding models in recent years, resulting in the most significant overhaul of public finance structures for the film industry in almost 20 years. Film, Cinema, Screen evaluates the Australian film industry’s recent development – particularly in terms of Australian feature film and television series production; it also advocates new approaches to Australian film, and address critical issues around how screen production globally is changing, with implications for local screen industries.

Nitrogen and phosphorus transformations in fixed-film biofilters subjected to aeration/no-aeration cycles

Despite recent developments in fixed-film combined biological nutrients removal (BNR) technology; fixed-film systems (i.e., biofilters), are still at the early stages of development and their application has been limited to a few laboratory-scale experiments. Achieving enhanced biological phosphorus removal in fixed-film systems requires exposing the micro-organisms and the waste stream to alternating anaerobic/aerobic or anaerobic/anoxic conditions in cycles. The concept of cycle duration (CD) as a process control parameter is unique to fixed-film BNR systems, has not been previously investigated, and can be used to optimise the performance of such systems. The CD refers to the elapsed time before the biomass is re-exposed to the same environmental conditions in cycles. Fixed-film systems offer many advantages over suspended growth systems such as reduced operating costs, simplicity of operation, absence of sludge recycling problems, and compactness. The control of nutrient discharges to water bodies, improves water quality, fish production, and allow water reuse. The main objective of this study was to develop a fundamental understanding of the effect of CD on the transformations of nutrients in fixed-film biofilter systems subjected to alternating aeration I no-aeration cycles A fixed-film biofilter system consisting of three up-flow biofilters connected in series was developed and tested. The first and third biofilters were operated in a cyclic mode in which the biomass was subjected to aeration/no-aeration cycles. The influent wastewater was simulated aquaculture whose composition was based on actual water quality parameters of aquacuture wastewater from a prawn grow-out facility. The influent contained 8.5 - 9:3 mg!L a111monia-N, 8.5- 8.7 mg/L phosphate-P, and 45- 50 mg!L acetate. Two independent studies were conducted at two biofiltration rates to evaluate and confirm the effect of CD on nutrient transformations in the biofilter system for application in aquaculture: A third study was conducted to enhance denitrification in the system using an external carbon- source at a rate varying from 0-24 ml/min. The CD was varied in the range of0.25- 120 hours for the first two studies and fixed at 12 hours for the third study. This study identified the CD as an important process control parameter that can be used to optimise the performance of full-scale fixed-film systems for BNR which represents a novel contribution in this field of research. The CD resulted in environmental conditions that inhibited or enhanced nutrient transformations. The effect of CD on BNR in fixed-film systems in terms of phosphorus biomass saturation and depletion has been established. Short CDs did not permit the establishment of anaerobic activity in the un-aerated biofilter and, thus, inhibited phosphorus release. Long CDs resulted in extended anaerobic activity and, thus, resulted in active phosphorus release. Long CDs, however, resulted in depleting the biomass phosphorus reservoir in the releasing biofilter and saturating the biomass phosphorus reservoir in the up-taking biofilter in the cycle. This phosphorus biomass saturation/depletion phenomenon imposes a practical limit on how short or long the CD can be. The length of the CD should be somewhere just before saturation or depletion occur and for the system tested, the optimal CD was 12 hours for the biofiltration rates tested. The system achieved limited net phosphorus removal due to the limited sludge wasting and lack of external carbon supply during phosphorus uptake. The phosphorus saturation and depletion reflected the need to extract phosphorus from the phosphorus-rich micro-organisms, for example, through back-washing. The major challenges of achieving phosphorus removal in the system included: (I) overcoming the deterioration in the performance of the system during the transition period following the start of each new cycle; and (2) wasting excess phosphorus-saturated biomass following the aeration cycle. Denitrification occurred in poorly aerated sections of the third biofilter and generally declined as the CD increased and as the time progressed in the individual cycle. Denitrification and phosphorus uptake were supplied by an internal organic carbon source, and the addition of an external carbon source (acetate) to the third biofilter resulted in improved denitrification efficiency in the system from 18.4 without supplemental carbon to 88.7% when the carbon dose reached 24 mL/min The removal of TOC and nitrification improved as the CD increased, as a result of the reduction in the frequency of transition periods between the cycles. A conceptual design of an effective fixed-film BNR biofilter system for the treatment of the influent simulated aquaculture wastewater was proposed based on the findings of the study.

The differential impact of holocaust trauma across three generations

In the current thesis, the reasons for the differential impact of Holocaust trauma on Holocaust survivors, and the differential intergenerational transmission of this trauma to survivors’ children and grandchildren were explored. A model specifically related to Holocaust trauma and its transmission was developed based on trauma, family systems and attachment theories as well as theoretical and anecdotal conjecture in the Holocaust literature. The Model of the Differential Impact of Holocaust Trauma across Three Generations was tested firstly by extensive meta-analyses of the literature pertaining to the psychological health of Holocaust survivors and their descendants and secondly via analysis of empirical study data. The meta-analyses reported in this thesis represent the first conducted with research pertaining to Holocaust survivors and grandchildren of Holocaust survivors. The meta-analysis of research conducted with children of survivors is the first to include both published and unpublished research. Meta-analytic techniques such as meta-regression and sub-set meta-analyses provided new information regarding the influence of a number of unmeasured demographic variables on the psychological health of Holocaust survivors and descendants. Based on the results of the meta-analyses it was concluded that Holocaust survivors and their children and grandchildren suffer from a statistically significantly higher level or greater severity of psychological symptoms than the general population. However it was also concluded that there is statistically significant variation in psychological health within the Holocaust survivor and descendant populations. Demographic variables which may explain a substantial amount of this variation have been largely under-assessed in the literature and so an empirical study was needed to clarify the role of demographics in determining survivor and descendant mental health. A total of 124 participants took part in the empirical study conducted for this thesis with 27 Holocaust survivors, 69 children of survivors and 28 grandchildren of survivors. A worldwide recruitment process was used to obtain these participants. Among the demographic variables assessed in the empirical study, aspects of the survivors’ Holocaust trauma (namely the exact nature of their Holocaust experiences, the extent of family bereavement and their country of origin) were found to be particularly potent predictors of not only their own psychological health but continue to be strongly influential in determining the psychological health of their descendants. Further highlighting the continuing influence of the Holocaust was the finding that number of Holocaust affected ancestors was the strongest demographic predictor of grandchild of survivor psychological health. Apart from demographic variables, the current thesis considered family environment dimensions which have been hypothesised to play a role in the transmission of the traumatic impact of the Holocaust from survivors to their descendants. Within the empirical study, parent-child attachment was found to be a key determinant in the transmission of Holocaust trauma from survivors to their children and insecure parent-child attachment continues to reverberate through the generations. In addition, survivors’ communication about the Holocaust and their Holocaust experiences to their children was found to be more influential than general communication within the family. Ten case studies (derived from the empirical study data set) are also provided; five Holocaust survivors, three children of survivors and two grandchildren of survivors. These cases add further to the picture of heterogeneity of the survivor and descendant populations in both experiences and adaptations. It is concluded that the legacy of the Holocaust continues to leave its mark on both its direct survivors and their descendants. Even two generations removed, the direct and indirect effects of the Holocaust have yet to be completely nullified. Research with Holocaust survivor families serves to highlight the differential impacts of state-based trauma and the ways in which its effects continue to be felt for generations. The revised and empirically tested Model of the Differential Impact of Holocaust Trauma across Three Generations presented at the conclusion of this thesis represents a further clarification of existing trauma theories as well as the first attempt at determining the relative importance of both cognitive, interpersonal/interfamilial interaction processes and demographic variables in post-trauma psychological health and transmission of traumatic impact.

Examination of pencil beam predictions of small-field dose using dosimetry film and Monte Carlo simulations

The iPlan treatment planning sys-tem uses a pencil beam algorithm, with density cor-rections, to predict the doses delivered by very small (stereotactic) radiotherapy fields. This study tests the accuracy of dose predictions made by iPlan, for small-field treatments delivered to a planar solid wa-ter phantom and to heterogeneous human tissue using the BrainLAB m3 micro-multileaf collimator.

In vivo evaluation of an ultra-thin polycaprolactone film as a wound dressing

The use of ultra-thin films as dressings for cutaneous wounds could prove advantageous in terms of better conformity to wound topography and improved vapour transmission. For this purpose, ultra-thin poly(epsilon-caprolactone) (PCL) films of 5-15 microm thickness were fabricated via a biaxial stretching technique. To evaluate their in vivo biocompatibility and feasibility as an external wound dressing, PCL films were applied over full and partial-thickness wounds in rat and pig models. Different groups of PCL films were used: untreated, NaOH-treated, untreated with fibrin, NaOH-treated with perforations, and NaOH-treated with fibrin and S-nitrosoglutathione. Wounds with no external dressings were used as controls. Wound contraction rate, histology and biomechanical analyses were carried out. Wounds re-epithelialized completely at a comparable rate. Formation of a neo-dermal layer and re-epithelialization were observed in all the wounds. A lower level of fibrosis was observed when PCL films were used, compared to the control wounds. Ultimate tensile strength of the regenerated tissue in rats reached 50-60% of that in native rat skin. Results indicated that biaxially-stretched PCL films did not induce inflammatory reactions when used in vivo as a wound dressing and supported the normal wound healing process in full and partial-thickness wounds.